CS Paper Radar

Selective Monocular Precession Estimation under Geometric and Evaluation Ambiguity: An Auditable Synthetic Study with ORBIT-SCOUT

Carlos Eduardo Sanoja

cs.CV ·submitted 2026-10-26 04:04 UTC · v1

Abstract

Monocular observations of a tumbling object can support a precise fitted trajectory without establishing that the recovered physical axis is correct. We study this distinction for elongated, approximately cylindrical targets observed by a calibrated stationary camera. ORBIT-SCOUT couples image-derived line and rim geometry to constant-cone and torque-free triaxial trajectory families, then returns a linked momentum-axis and mean-precession-rate estimate only when numerical, geometric, temporal and competing-hypothesis checks pass. We describe the measurement objective, selection policy and limitations, and situate them within spacecraft pose estimation, unknown-target reconstruction, rigid-body identification and selective prediction. An internally preregistered population of 96 new synthetic scenes was processed in two cold passes, retaining all 192 attempts. In the primary pass, 38 scenes produced jointly correct estimates, none produced an incorrect estimate, 57 were withheld and one execution was incomplete. Correct coverage on the 64 supported scenes was 25/64. Ninety-five repeated pairs were scientifically equivalent under a frozen comparison policy; the remaining pair was incomplete. The registered coverage, failure-free execution and all-case repeatability targets were not met. Historical audits also exposed an overly permissive axis metric and motion-dependent acquisition cadence. The contribution is a documented measurement-to-decision implementation and a failure-preserving evaluation case study, not a new rigid-body theory or evidence of state-of-the-art accuracy. Zero observed errors does not establish calibrated risk, and conditional temporal checks do not remove shared image-feature bias. Real-image transfer and external reproduction remain open.

Comment
29 pages, 4 figures and 7 tables; extended narrative review and ancillary code/data for descriptive arithmetic and physical-metric reproduction

Closest papers

Nearest neighbours by meaning across the whole index.

HAT: Hypothesis-Anchored Tracking for Video Monocular Spacecraft Pose Estimation

cs.CV ·2026-09-18 ·André Lopo, Atabak Dehban, Rodrigo Ventura
similarity 0.68
Abstract · 8 pages, 3 figures, 4 tables

Monocular 6-DoF pose estimation of non-cooperative targets is important for on-orbit servicing and debris removal. A single-image estimator can confuse near-symmetric spacecraft orientations, and tracking can preserve an incorrect pose. We present Hypothesis-Anchored Tracking (HAT), a causal framework that uses inter-frame motion to select among competing CAD-based pose hypotheses before alignment and fusion. Rather than independently choosing the highest-scoring hypothesis in each image, HAT retains competing orientation histories and selects a pose to anchor the relative trajectory estimated by monocular SLAM. Sparse anchors and pose fusion provide per-frame estimates after initialization without revising past outputs. The method requires only a calibrated RGB sequence, a metric CAD model, and target image regions, which can be supplied by detection or segmentation. The pretrained pose and SLAM networks require no target-specific training or fine-tuning. We evaluate two versions, Mega-HAT and Pico-HAT, using MegaPose and PicoPose, on SPARK-2024, SwissCube and SHIRT, with YCB-Video assessing performance outside the space domain. Using one temporal configuration per method, the arithmetic means of the four dataset-wise comparisons show 9.4% lower mean pose error and 3.76 times the sustained input FPS for Mega-HAT relative to independent MegaPose, and 23.9% lower mean pose error and 2.42 times the FPS for Pico-HAT relative to independent PicoPose. Mega-HAT ablations on SPARK and an offline reference examine component contributions and the effect of revising past estimates.

0.51

Spacecraft Pose Tracking via Kinematic Prediction and Selective Event Correction

cs.RO ·2026-10-14 ·Yonglong Zhang, Guanning Yao, Shuo Zhang, Yifan Yang, Yang Liu† +1 more
similarity 0.64
Abstract

In initialized spacecraft tracking, a short-horizon motion prediction remains available as event support changes. Observation-Aligned Event Innovation (OA-EI) uses events to correct selected components of this prediction. A constant-body-twist model propagates the complete pose; the event encoder proposes rotational and normalized image-plane translation corrections, retaining propagated axial depth. Candidate magnitudes come from a bounded Scale Gate and a deterministic activity factor, with empty windows returning the prediction unchanged. Evaluation uses four FRESH physical-event trajectories, twenty rollout starts, and three training seeds. Each rollout starts from two reference poses and then uses self-estimates. At 7.7 seconds, rotation and translation errors fall from 41.63°/57.28 mm for prediction alone to 15.73°/22.41 mm for OA-EI, reductions of 62.2% and 60.9%. Failure rates fall from 20.0% to 1.67%. Matched ablations favor the rotation-bearing interface for overall pose accuracy; combining scaling with activity support gives the lowest errors at every tested event-retention level. On Jetson Orin Nano, the measured in-memory update takes 44.56 milliseconds at the median and 58.77 milliseconds at P95.

0.17

Initialization-Free Bundle Adjustment Revisited: A Controlled Experimental Study

cs.CV ·2026-08-18 ·Simon Weber, Mateo de Mayo, Je Hyeong Hong, Carl Olsson, Daniel Cremers +1 more
benchmarkcode/data similarity 0.61
Abstract

Initialization-free bundle adjustment (InitFree BA) aims to recover camera poses and scene structure directly from image observations, avoiding the geometric initialization stages of conventional structure-from-motion pipelines. Recent methods based on Object-Space Error (OSE) formulations and Variable Projection (VarPro) show encouraging optimization behavior from random camera configurations. However, existing evaluations primarily measure optimization success, leaving unclear whether a low OSE objective yields a valid metric 3D reconstruction. We revisit InitFree BA experimentally through a unified evaluation framework combining a C++ implementation of existing OSE formulations with a Blender-based dataset generator providing exact ground truth and controlled camera configurations and observation densities. Our experiments reveal a previously overlooked optimization--reconstruction gap: projective solutions with similarly low OSE values can lead to substantially different Euclidean reconstructions after metric upgrade. We identify initialization priors, landmark observation density, and metric-upgrade stability as key factors governing reconstruction success. Overall, our results suggest that the main challenge of InitFree BA is not merely minimizing OSE objectives, but obtaining projective reconstructions that admit reliable metric upgrade. We believe that the proposed benchmark, implementation, and analysis establish stronger experimental foundations for future research on initialization-free bundle adjustment, a problem largely unexplored within the computer vision community. Project page is available at https://github.com/simonwebertum/InitFreeBA.git.

0.41

Direct Regression and Geometric Recovery for Event-based Spacecraft Pose Estimation

cs.CV ·2026-11-06 ·Pruthvi Nandan Janga, Kashyap Hegde Kota, Bharatesh Chakravarthi
similarity 0.61
Abstract

Event cameras offer high temporal resolution and dynamic range for uncooperative spacecraft pose estimation, but models trained on synthetic event streams must generalize to the noise, background activity, and contrast variation of physical sensors. We present a comparative systems study of two independently developed approaches to synthetic-to-real, event-based 6-DoF spacecraft pose estimation. The first is a modular pipeline that combines learned keypoint detection and unlabeled target-domain adaptation with geometry-based pose recovery and temporal smoothing. The second directly regresses translation and rotation from global and cropped event representations using an apparent-scale cue, physics-motivated synthetic corruptions, and feature-consistency regularization. We evaluate both systems under the same SPARK 2026 hidden-test protocol on the real-event split of SPADES, with predictions for all test frames. The results reveal a component-wise reversal concealed by the aggregate challenge score: direct regression reduces orientation error by 22.7% (1.1767 to 0.9101 rad) and obtains a 13.4% lower composite score, whereas the modular pipeline reduces relative translation error by 78.7% (0.1335 to 0.0285). Archived configurations and a qualitative failure case identify plausible explanations for these complementary error profiles, without isolating their causes. These findings motivate a testable hybrid design that combines direct orientation estimation with geometry-constrained translation recovery.

0.17

Sub-Pixel Affine Registration of Space Debris Images via the Radon Point Spread Function

cs.CV cs.GR ·2026-09-07 ·Shenshen Luan, Miaomiao Tian, Shuai Jiang, Yan Yang, Shuguo Xie +1 more
similarity 0.61
Abstract

Inter-frame affine misalignment caused by platform jitter and attitude adjustments poses a fundamental challenge for multi-frame analysis of point targets in optical surveillance. Conventional registration methods rely on spatial intensity correlations or distinctive image features, both of which are largely absent in low-signal-to-noise-ratio point target imagery. We introduce the Radon Point Spread Function (RPSF) to characterize point targets in the Radon-transformed domain, and derive a closed-form framework that jointly estimates inter-frame translation and rotation from as few as four scalar RPSF samples per frame pair. The method requires no iterative optimization, feature extraction or interpolation, which is suitable for resource-constrained onboard processing. Simulation results confirm sub-pixel translation accuracy and a mean rotation error of 0.2556° at 1° Radon angular resolution. Validation on five real space debris datasets including both ground-based and in-orbit observations yields a mean calibration error below 0.5 pixels, substantially exceeding the precision required for reliable multi-frame processing.

0.29

Unreasonable Confidence from Simulator Misspecification: Directional Robustness on the SPEED+ Sim-to-Real Benchmark

cs.CV cs.AIcs.LG ·2026-11-15 ·Nikolay Dolgov
publishedbenchmarkcode/data similarity 0.61
Abstract · 22 pages, 5 figures, 20 tables. Extended version of a paper at the Sim2Science workshop, NeurIPS 2026. Code, per-image predictions and pre-r…

Vision-based navigation systems for orbit must be trained almost entirely on synthetic imagery, because real labelled images of a given spacecraft in flight rarely exist. Benchmarks like SPEED+ are built for that situation: the training set comes from a simulator, and the test sets are real images of a satellite mockup under two kinds of lighting. That simulator approximates how light reflects off mylar and aluminium, and like every scientific simulator it is misspecified. Its error is radiometric, since it misses the specular highlights, hard shadows and sensor saturation common in real images. We probe the resulting synthetic-to-real gap, the central risk for such systems, with a deliberately simple monocular pose estimator. In a 2x2 study of backbone adaptation and photometric augmentation, trained on synthetic images and tested on both real hardware-in-the-loop domains, we find three things. (1) The model does not know it is failing: regions conformally calibrated to 90% on synthetic data cover only 9-15% of rotation errors on sunlamp and 21-38% on lightbox, so a wrong pose carries the confidence of a correct one. (2) Transfer is asymmetric: scaling data and features improved synthetic rotation error from 1.65 to 1.03 rad but moved the harshly lit sunlamp domain by only 0.05 rad, under twice its seed s.d., whereas adapting the backbone's last stage carried 63-83% of its extra synthetic gain to both real domains. (3) Once the backbone adapts, augmentation helps only in the direction it models: our photometric stack improved the diffusely lit lightbox domain from 1.17 to 0.99 rad on every seed but moved sunlamp no more than seed-to-seed variation, while with the backbone frozen it helped sunlamp more. Every post-review experiment was pre-registered, and the code, per-image predictions and pre-registration record are at https://github.com/lokindoo/spacecraft-pose-estimation.

0.38

Monocular Navigation Relative to Unknown Spacecraft Using a Transformer-Aided Kalman Filter

cs.RO cs.CV ·2026-10-05 ·Pol Francesch Huc, Simone D'Amico
published similarity 0.59
Abstract

This work presents a novel learning-based pipeline for pose estimation of unknown spacecraft using only monocular images from a single servicer. The approach combines a transformer-based neural network with a Multi-State Constraint Kalman Filter (MSCKF) to estimate the pose (i.e., position and orientation of the target spacecraft relative to the camera) throughout rendezvous and proximity operations. Unlike existing vision-based methods that require prior knowledge of the target shape or inertia properties, rely on additional sensing modalities such as depth, lidar, or stereo, or only recover translation up to scale, the proposed pipeline generalizes to previously unseen spacecraft using a single monocular camera. The transformer network estimates the odometry, the change in pose between images up to scale, from SuperPoint features matched by LightGlue. The MSCKF uses these pseudo-measurements along with an orbit and attitude kinematics model to estimate the pose of the target. In particular, the relative orbit elements, the target's attitude with respect to the servicer's camera, and the associated angular velocity are estimated directly by the filter. Given the monocular approach and short distance to the target, the full observability of the range to the target is recovered via attitude maneuvers by the servicer. The method is trained and evaluated on a re-rendered high-resolution version of the SPE3R dataset, which includes synthetic images of 103 spacecraft. Eleven of these spacecraft are held out during training to evaluate the generalization to unseen targets. Monte Carlo simulations are then used to evaluate the navigation pipeline on rendered trajectories of the held out spacecraft. The results demonstrate that learned vision pipelines as a front-end for Kalman filters provide median errors of 3.7° in attitude and 2.2% of range in ROE when navigating about unknown targets.

0.53

Polarity--Time Interaction and Multi-Level Reliability for Event-Based Spacecraft Pose Estimation

cs.AI cs.RO ·2026-10-27 ·Yonglong Zhang, Zongwu Xie, Yang Liu
similarity 0.58
Abstract

Sparse event responses produce uneven keypoint errors whose effects on spacecraft pose depend on correspondence geometry and the reliability of successive observations. We present a reliability-aware framework connecting polarity--time localization, geometric recovery, event--CAD refinement, and trajectory optimization. A three-branch representation combines positive events, negative events, and recent-event timing through cross-branch attention and gating, followed by spatiotemporal aggregation. An ordered semantic-point head estimates relative correspondence precision for geometrically constrained pose recovery. Event-edge and CAD-projection agreement then guide local pose refinement under keypoint-geometry safeguards. At the sequence level, a ten-dimensional descriptor combines heatmap shape, reprojection consistency, and geometric conditioning to set time-aligned observation scales. On the official SPADES challenge test set, the complete system achieves a combined pose score of 0.0474, approximately 5.4\% below PASAN+IRIS. Validation ablations reduce the score from 0.0772 for base localization with uniform PnP to 0.0514 for the complete cascade; on identical single-frame observations, quality weighting reduces the score from 0.0549 with constant-weight optimization to 0.0514.

0.23