CS Paper Radar

Nonprehensile Robotic Catching Using Virtual Constraints

Aakash Khandelwal, Ranjan Mukherjee

eess.SY cs.RO ·submitted 2026-10-26 17:57 UTC · v1

Abstract

The problem of nonprehensile robotic catching is addressed using virtual nonholonomic constraints (VNHCs); the motion of the robot end-effector is designed and controlled directly in terms of the states of the object before it is caught on the surface of the end-effector. In contrast to contemporary approaches, our approach avoids the need for object trajectory prediction, and consequent time-varying robot trajectory generation. With a focus on the planar case, we demonstrate that our VNHC approach can be used to catch an object on an end-effector at a desired height, with minimal relative normal velocity at the contact instant. Moreover, the VNHC function depends only on the desired catching height, and the same VNHC can be used for a range of initial conditions. We use model predictive control (MPC) to bring the object and end-effector to rest at a desired location after contact is made. The approach is validated in simulation.

Comment
9 pages, 6 figures; an abridged version of this article has been submitted to the 2027 American Control Conference (ACC)

Closest papers

Nearest neighbours by meaning across the whole index.

Reachability-Guided Sequential Quadratic Programming-Guarded Model Predictive Path Integral for Safe Nonlinear Predictive Control

cs.RO eess.SY ·2026-10-03 ·Alexandre Didier, Jason J. Choi, Namhoon Cho, Claire J. Tomlin, Melanie N. Zeilinger
similarity 0.62
Abstract

Safe robot control often requires combining long-horizon performance optimization with hard state and input constraints, but existing approaches tend to address this tradeoff partially. Sampling-based model predictive control (MPC) methods such as model predictive path integral (MPPI) are effective in handling nonlinear and nonconvex environments, yet their finite-sample rollouts and unconstrained weighted-average update can return an unsafe control. Deterministic nonlinear MPC can explicitly incorporate constraints, but its real-time safety and performance depends strongly on warm starts and local convergence. Hamilton--Jacobi reachability (HJR) provides rigorous safety certificates, but offline value-function computation remains practical only for reduced-order models. We propose ReSQ-MPPI, a reachability-informed generation--refinement architecture that combines these complementary strengths. An HJR value function computed offline for a reduced-order model guides online MPPI sampling toward safe, promising trajectory candidates. The MPPI solution is then refined by a small number of sequential quadratic programming (SQP) iterations in a full-order MPC problem. A key observation is that the standard MPPI inference step is an unconstrained weighted least-squares problem; ReSQ-MPPI replaces it with a constrained MPC refinement that recovers the MPPI update when it is feasible and minimally modifies it otherwise. Simulations in cluttered navigation and autonomous racing environments demonstrate that ReSQ-MPPI improves safety and performance over standalone MPPI, MPC, and reachability-filtered sampling-based control baselines.

0.18

Virtual model control for compliant reaching under uncertainties

cs.RO eess.SY ·2026-10-05 ·Yi Zhang, Daniel Larby, Fumiya Iida, Fulvio Forni
publishedhot directionhighly cited similarity 0.62
Abstract

Virtual Model Control (VMC) is an approach to design a controller for force-controlled robots in complex uncertain environments. While this method was primarily investigated for legged robot locomotion in the past, it can be more generally applicable to other types of robotic systems. This paper investigates the VMC framework for reaching tasks in a force-controlled robotic arm. We propose six different approaches to designing virtual models in order to achieve reaching tasks in environments with obstacles and uncertainties. A force-controlled 8 degree-of-freedom humanoid robot was used to validate the proposed approach in the real world. We conducted three experiments to test the performance of VMC controllers in terms of predictability, sensitivity to external force, and adaptability against known and unknown obstacles. Experimental analyses show that, even though the proposed approach needs to sacrifice accuracy and trajectory optimality, it enables us to design complex reaching motions under uncertainties, in an intuitive and extendable manner.

0.74

Jacobian State Augmented Viable Kinematic Safety Filter

cs.RO eess.SY ·2026-10-11 ·Siddharth Singh, Joshua Vaughan
similarity 0.61
Abstract · 8 pages, 8 figures, conference submission

Safety Filters (SF) are leveraged to design certifiably safe controllers, which ensures forward invariance on a defined safe set when the filter is feasible. Predictive Safety Filters (PSF) embed these constraints to a closed-loop model-based optimization method to improve constraint satisfaction, and reduce feasibility loss caused by myopic, one-step filtering. Related viability-based methods emphasize approximating a viability kernel which ensures admissible control for all future time, but requires significant computational expense. This work introduces a Jacobian-based kinematic safety filter leveraging an augmented state variable with task-space velocity and filters task-space acceleration to preserve the feasibility of a low-level filter while enforcing joint position and velocity. The proposed method introduces a nested Quadratic Program (QP) formulation, defines a conservative inner approximation of viability envelope and computes a viable planner online. The method is validated in a simplified 2R planar manipulator simulation environment and shows significant improvement compared to a baseline Control Barrier Function Quadratic Program (CBF-QP) based filter. The experiments highlights the improvements in terms of computation time compared to traditional PSF and Reference Governor approach while also showing significant reduction in feasibility violations. Lastly, a simplified demonstration on a simulated 6-DoF manipulator highlights the potential scalability of the method to higher degree-of-freedom setups.

0.13

Geometry-Aware Predictive Control for Walk-to-Run Bipedal Obstacle Crossing

cs.RO ·2026-10-11 ·Aashish Sahu, R. Prasanth Kumar
similarity 0.60
Abstract

This paper presents a geometry-aware predictive control framework for bipedal obstacle crossing across walking and running regimes. The proposed approach integrates a phase-structured trajectory generator with a constrained model predictive control (MPC) tracking layer to generate coordinated pelvis and swing-foot motions during obstacle traversal. The crossing process is represented through five interpretable phases: pre-crossing, leading-leg clearance, straddle, trailing-leg clearance, and recovery. Within this structure, swing-foot elevation is adapted as a function of obstacle height, while lateral stance widening and pelvis repositioning are introduced as functions of obstacle depth to improve transverse clearance and body alignment. A continuous gait-parameter evolution enables smooth walk-to-run transition without discrete controller switching. The generated references are tracked using MPC to regulate motion smoothness, clearance feasibility, touchdown behavior, and lateral admissibility. The framework is evaluated in reduced-order simulation over five progressively difficult obstacles under walking and running conditions. The robot successfully crosses the first four obstacles, achieving minimum body-obstacle clearances of 0.036, 0.036, 0.059, and 0.017 m, respectively. The fifth and most demanding obstacle leads to collision, identifying the current operating boundary of the proposed reduced-order formulation. Overall, the method provides a compact, interpretable, and computationally efficient basis for intelligent obstacle-aware bipedal locomotion.

0.24

ContactKernels: Adaptive Proposals using Geometry-COnditioned Wrenches for Contact-Rich Manipulation

cs.RO ·2026-09-26 ·Aditya Kamireddypalli, Matías Mattamala, João Moura, Sethu Vijayakumar, Steve Tonneau +1 more
hot direction similarity 0.60
Abstract · Prelim preprint

Contact-rich insertion requires precise geometric alignment despite uncertainty in perception, geometry, and con- trol. When this uncertainty causes unintended contact, the re- sulting contact provides local information that can guide correc- tive motion. Sampling-based Model Predictive Control (SMPC) is well suited to this setting because it optimizes through forward simulation without requiring gradients through contact dynamics. However, standard SMPC methods typically use generic proposal distributions that do not exploit observed contact to determine where to search next. We introduce ContactKernels, a contact-adaptive proposal kernel that uses geometry-conditioned wrench measurements to estimate contact location and local contact geometry. The estimated contact state directly adapts the proposal distribution: contact location biases the search toward corrective motions, while the contact normal shapes the sampling covariance. We evaluate ContactKernels with Predictive Sampling (PS) and Model Predictive Path Integral (MPPI) control across multiple insertion geometries in simulation and on a real robot. In simulation, ContactKernels improves mean insertion success by over 50 % points across both controllers. On the real robot, it increases insertion success from 53.3 % to 90.0 % and reduces mean time to insertion by 33 %. These results show that contact information can improve sampling-based control not only as feedback, but also by directly determining where the controller searches

0.30

RoKON: Efficient and Adaptive Data-Enabled Predictive Control for Robotic Manipulation

cs.RO ·2026-10-26 ·Akshun Sharma, Zhongqi Wei, Buqing Ou, Frederike Dümbgen
similarity 0.60
Abstract · 8 pages, 3 figures

Data-enabled predictive control has recently emerged as a promising control paradigm, enabling a transparent optimal-control formulation without the need to learn an explicit dynamics model. This paper presents a number of extensions paving the path towards its use in real-time robotics tasks. Following recent work, we utilize a nonlinear predictor based on Gaussian kernels to represent the relationship between input and output data. We propose a damped Gauss-Newton method that enables real-time control by efficiently exploiting the least-squares structure of the control problem. In addition, we introduce a hybrid buffer management strategy that incorporates informative online data while retaining relevant offline data, allowing the predictor to account for changes in the dynamics. We demonstrate the tracking performance and computational suitability of the proposed method in MuJoCo using a Franka Research 3 arm pushing a block across surface, without prior knowledge of its changing friction values.

0.45

Physics-Aware Object-Centric SE(3) Forecasting for Real-Time Proactive Dynamic Grasping

cs.RO ·2026-10-13 ·Yirui Zhou, Hongli Xu, Ying Zheng, Yi Wang, Lap-Pui Chau
position similarity 0.59
Abstract

Proactive dynamic grasping requires robots to predict the future state at which physical contact will occur, rather than reacting to the currently observed object pose. But what future must the robot predict, and at what level of abstraction? We argue that contact-relevant rigid-body state in SE(3) is a compact task-sufficient abstraction for this problem: it directly determines where and when the robot should establish contact, without requiring visually complete future scenes. This insight leads to a lightweight object-centric forecast-then-select framework that predicts future rigid-body trajectories from short pose histories and uses a reachability-aware interception selector to choose feasible contact states under kinematic and timing constraints. Trained with randomized physics simulation over primitive shapes, the forecaster transfers to real objects once their metric geometry and SE(3) state histories are recovered. Experiments across simulation and real-world dynamic grasping tasks show that our framework improves the average success rate from \(24.5\%\) to \(62.0\%\) in simulation, and from \(15.3\%\) to \(67.3\%\) in real-world catching, conveyor, and turntable interception. The SE(3) forecaster runs in \(15\,\mathrm{ms}\), orders of magnitude faster than dense visual future prediction, enabling real-time contact decision making. Our results suggest that effective proactive grasping does not require imagining the entire future scene. Instead, predicting the compact physical future that determines contact provides an effective and practical abstraction for real-time dynamic grasping.

0.18

Leaning Over to Reach Far-Away Objects

cs.RO ·2026-11-14 ·Allen Devaraj, William Xie, Nikolaus Correll
code/data similarity 0.58
Abstract · 8 pages, 9 figures, 1 table. Under review at ICRA 2027. Videos and code at https://h12leaner.github.io/

We study supported reaching to extend a humanoid robot's workspace by bracing against the environment for stabilization using a straightforward yet capable whole-body model predictive control (MPC) approach, exclusively with local sensing and fiducial markers. While typical solutions for whole body humanoid control aim at avoiding or accommodating contact, contact is explicitly required to reach objects placed on surfaces far out of normal reach. We employ sampling-based MPC for whole-body leaning, bracing, reaching, and recovery on a Unitree H1-2 humanoid. The controller runs in real-time at 34 Hz on a laptop, transfers sim-to-real, extends reach by about 50 cm beyond the unbraced standing workspace, and sustains the loaded posture for over four minutes, before pose estimation drifts. The controller reaches the commanded target in 89% of trials and completes the full reach-and-recovery cycle in 81%, across 54 trials spanning six targets and three table heights. We further characterize why such a small real-time sampling budget is sufficient, finding that temporal persistence of sampled actions and exploration scale strongly govern success, while CEM provides the widest operating region over planning rate and model mismatch. These results establish a real-world baseline for online, contact-rich humanoid manipulation. Code, videos, and full hardware details are available at https://h12leaner.github.io/

0.35