CS Paper Radar

RoKON: Efficient and Adaptive Data-Enabled Predictive Control for Robotic Manipulation

Akshun Sharma, Zhongqi Wei, Buqing Ou, Frederike Dümbgen

cs.RO ·submitted 2026-10-26 13:55 UTC · v1

Abstract

Data-enabled predictive control has recently emerged as a promising control paradigm, enabling a transparent optimal-control formulation without the need to learn an explicit dynamics model. This paper presents a number of extensions paving the path towards its use in real-time robotics tasks. Following recent work, we utilize a nonlinear predictor based on Gaussian kernels to represent the relationship between input and output data. We propose a damped Gauss-Newton method that enables real-time control by efficiently exploiting the least-squares structure of the control problem. In addition, we introduce a hybrid buffer management strategy that incorporates informative online data while retaining relevant offline data, allowing the predictor to account for changes in the dynamics. We demonstrate the tracking performance and computational suitability of the proposed method in MuJoCo using a Franka Research 3 arm pushing a block across surface, without prior knowledge of its changing friction values.

Comment
8 pages, 3 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Feedback-Linearised Trajectory Tracking via Model-Informed Robust Geometric DDPC

cs.RO eess.SY ·2026-11-17 ·Pranav Gupta, Deepan Muthirayan, Ravi Banavar
similarity 0.68
Abstract · This manuscript has been submitted to the 9th Annual Learning for Dynamics & Control Conference, taking place in Stockholm, Sweden, in June …

Data-driven predictive control (DDPC) predicts system responses from recorded trajectories, but nonlinear dynamics can limit the accuracy of fixed linear predictors. This paper studies geometric robust DDPC for trajectory tracking of a fully actuated manipulator using model-based feedback linearisation. A mechanical model maps virtual acceleration commands into joint torques, while recorded data capture residual dynamics arising from imperfect model parameters. The controller minimises worst-case prediction error over an open Grassmannian ball centred at the fitted trajectory subspace. Simulations on a planar 2R manipulator under gravity compare the proposed method with double-integrator model predictive control (MPC) and direct regularised data-enabled predictive control (DeePC). Results show improved tracking over double-integrator MPC despite increased torque effort, while performance relative to DeePC depends on the reference trajectory.

0.11

Tactile Sensing-based Secure and Gentle Grasping of Unknown Objects

cs.RO ·2026-10-08 ·Feng Han
similarity 0.68
Abstract

Reliable robotic manipulation requires maintaining a firm grasp while strictly avoiding both contact slip and structural damage to the object. Satisfying these inherent \textit{secure-and-gentle} grasping constraints is challenging for unknown objects. We present a novel online data-driven predictive control framework for safe dynamic robotic grasping of unknown objects. The proposed system features a pair of compact, single-channel tactile-sensing modules that characterize the gripper-object dynamic interaction in real time, entirely bypassing the need for prior knowledge or offline training. A finite-state-machine-based grasping force probing mechanism is developed to establish the initial grasping force and explicitly identify grasping force constraints. Through online dynamics learning, a Gaussian Process (GP) model captures gripper-object interaction dynamics. The model uncertainties are further used to form robust grasping constraints, which are embedded into a model predictive control scheme. We demonstrate error convergence in a probabilistic sense. The proposed control framework runs at 100~Hz in real time to dynamically manipulate and handle objects rather than static holding. Extensive experimental evaluations across diverse contact surface topologies and various types of objects validate superior performance and efficiency compared to baseline strategies. The proposed method is able to manipulate objects ranging from delicate items, such as raw tofu and marshmallows, to rough objects, such as rocks.

0.08

Real-Time Dynamics-Based Torque-Sampling MPPI for Compliant and Force Aware Manipulation

cs.RO ·2026-09-02 ·Euncheol Im, Taehyun Kim, Yonghwan Oh, Myotaeg Lim, Yisoo Lee
published similarity 0.67
Abstract · 8 pages, 6 figures. Accepted to the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

This study proposes a novel Model Predictive Path Integral (MPPI)-based task-space control framework. The proposed framework explicitly solves rigid-body dynamics within a real-time MPC formulation and enforces safety constraints, enabling accurate motion and force control that yields compliant behaviors for safe and effective physical interaction of robotic manipulators in unstructured environments. By leveraging MPPI, the proposed framework efficiently handles nonlinear dynamics that are difficult to solve with conventional MPC approaches in real-time. Furthermore, we develop a torque-sampling-based control architecture that enables efficient exploitation of GPU-based parallelization, resulting in effective compliant and force-aware behaviors. As a result, the proposed framework achieves a solver update rate of over 166 Hz with a 0.18 s prediction horizon, and its performance is validated through real-world experiments on a 7-DoF manipulator.

0.38

Task-Space Motion-Force Nonlinear Model Predictive Control for Precise and Compliant Control under Uncertainties

cs.RO ·2026-10-12 ·Quang-Nam Nguyen, Ludovic Righetti
hot direction similarity 0.67
Abstract

In Nonlinear Model Predictive Control (NMPC), the control law is implicitly determined by the solution of an Optimal Control Problem (OCP). Consequently, OCP design is often tailored to specific platforms and tasks, demanding extensive expert knowledge and tuning effort. To address this, we propose a unified NMPC framework that directly plans and controls the robot joints subject to task-space motion and force requirements and is capable of seamlessly generalizing across multiple robotic platforms and diverse tasks. Furthermore, optimization-based methods often treat interactions as rigid contacts, making the torque solution sensitive to the modeling errors of the robot dynamics and the environment. We study the intrinsic task-space impedance of our proposed controller, its partial contraction for differential stability and differential passivity under unmodeled interactions. As a result, our framework enables closing the force-feedback loop in the high-level planning layer to achieve precise motion-force tracking performance, addressing the long-standing challenge of force-feedback NMPC. Finally, we validate our framework on physical hardware, demonstrating hybrid motion-force control on a redundant manipulator and compliant locomotion on a quadruped, while preserving core NMPC advantages such as hard constraint satisfaction, optimal redundancy exploitation, and real-time planning under unforeseen interactions.

0.42

Policy-Conditioned Koopman Representations for Parameterized Closed-Loop Systems

eess.SY ·2026-11-13 ·Kiran G. Krishnan, Shankar A. Deka
similarity 0.65
Abstract

Predicting the response of a nonlinear system across different feedback controllers requires a model that captures how the closed-loop dynamics change with the controller parameters. In a finite-dimensional Koopman model, these changes may affect both the latent dynamics and the observable coordinates used to represent them. In this paper, we propose a policy-conditioned Koopman representation framework to address this problem. This framework allows a single learned model to predict a family of closed-loop trajectories without retraining for each controller. We test the framework on four nonlinear prediction benchmarks, where the model stays below a 15% error threshold on every system, while each baseline exceeds it on at least one. As an example application, the resulting surrogate supports one-shot feedback-parameter selection: an optimization at the initial state selects a controller that then operates with fixed parameters and ongoing state feedback. On nonlinear control benchmarks including MuJoCo, the selected controllers stabilize every system with 3 to 97 times less online computation than nonlinear model predictive control. These results demonstrate how policy-dependent coordinates can support both prediction across closed-loop systems and controller selection without repeated online trajectory optimization.

0.15

Orientation Control of Soft Robots via Adiabatic Spectral Submanifolds

cs.RO eess.SY ·2026-09-13 ·Aron Karakai, Roshan S. Kaundinya, Mike Yan Michelis, Robert Katzschmann, George Haller
published similarity 0.65
Abstract · This paper has been accepted for presentation at the 2026 IEEE Conference on Decision and Control (CDC)

Soft robots are commonly sought for safety-critical interactions in delicate environments, where accurate position and orientation control is imperative. Model predictive control (MPC) offers a solution, but it requires a model of the robot's infinite-dimensional nonlinear dynamics that is at once accurate and computationally cheap. Recent theory on adiabatic spectral submanifolds (aSSMs) and their applications to soft robots provide data-driven model-reduction methods to construct such models. Here, we extend these methods to identify aSSMs from enlarged observable datasets and upgrade the currently available aSSM-MPC schemes. Evaluated on a high-fidelity finite-element simulation of a pressure-actuated soft arm, our controller reduces position and orientation tracking error by more than 60% compared to existing data-driven baselines.

0.47

A Physics-Informed Collision Learning Framework for Collaborative Robot Motion Generation

cs.RO eess.SY ·2026-10-08 ·Chen Cai, Steven Liu
similarity 0.63
Abstract

Close-proximity multi-arm manipulation requires collision models that are both geometrically accurate and differentiable enough for real-time optimization. Classical geometry checkers provide reliable distances but are difficult to use inside gradient-based model predictive control, while conservative proxy models can restrict tightly coupled motion. We present PI-UDF, a physics-informed unified differentiable framework for body-to-body collision distance prediction between articulated robots. PI-UDF combines analytical forward kinematics with learnable link-geometry embeddings and a shared residual network to predict pairwise inter-arm distances directly from robot configurations. To improve safety-critical fidelity, we combine quota-driven boundary mining with an asymmetric boundary-crossing penalty that emphasizes false-safe sign errors near the collision boundary. The learned distance field is integrated into nonlinear MPC as a differentiable inter-arm clearance term. We validate the framework on a real dual-Franka platform through high-speed close-proximity 14-DoF dual-arm swapping, sustained single-arm dynamic evasion, and dynamic-evasion planning configurations with frozen, predicted, and target-switching treatments of the moving arm. Hardware experiments and offline Drake/FCL replay show that PI-UDF provides a differentiable inter-arm clearance estimate suitable for closed-loop collision-aware collaborative robot motion generation.

0.21

Planning to Learn: Real-Time Robust Adaptive Control on the GPU with Guaranteed Future Learning

cs.RO cs.LGeess.SYmath.OC ·2026-10-14 ·Anutam Srinivasan, Siddhant Panse, Glen Chou
similarity 0.63
Abstract

Robust adaptive control is vital for keeping robots safe while actively reducing uncertainty in unfamiliar settings. However, traditional methods are often conservative since they fail to account for guaranteed future parameter learning during planning and struggle to scale to high-dimensional systems. In this work, we present A-SLS, a learning-aware robust adaptive model predictive control (RAMPC) framework based on system-level synthesis. A-SLS forecasts future parameter uncertainty and preserves correlations between process disturbances, parameter error, and estimate updates to construct tight, guaranteed reachable sets that account for future information gain. We also develop a GPU-accelerated A-SLS solver to enable real-time performance. Across nonlinear robotic systems, A-SLS reduces reachable-tube conservativeness, maintains real-time performance, and scales to whole-body control for a quadruped with 61 states, 8 uncertain parameters, and 12 control inputs. We further demonstrate the approach on hardware, where a physical Crazyflie drone learns an uncertain dynamics parameter online to stabilize on the fly.

0.26