CS Paper Radar

Feedback-Linearised Trajectory Tracking via Model-Informed Robust Geometric DDPC

Pranav Gupta, Deepan Muthirayan, Ravi Banavar

cs.RO eess.SY ·submitted 2026-11-17 18:56 UTC · v1

Abstract

Data-driven predictive control (DDPC) predicts system responses from recorded trajectories, but nonlinear dynamics can limit the accuracy of fixed linear predictors. This paper studies geometric robust DDPC for trajectory tracking of a fully actuated manipulator using model-based feedback linearisation. A mechanical model maps virtual acceleration commands into joint torques, while recorded data capture residual dynamics arising from imperfect model parameters. The controller minimises worst-case prediction error over an open Grassmannian ball centred at the fitted trajectory subspace. Simulations on a planar 2R manipulator under gravity compare the proposed method with double-integrator model predictive control (MPC) and direct regularised data-enabled predictive control (DeePC). Results show improved tracking over double-integrator MPC despite increased torque effort, while performance relative to DeePC depends on the reference trajectory.

Comment
This manuscript has been submitted to the 9th Annual Learning for Dynamics & Control Conference, taking place in Stockholm, Sweden, in June 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Real-Time Dynamics-Based Torque-Sampling MPPI for Compliant and Force Aware Manipulation

cs.RO ·2026-09-02 ·Euncheol Im, Taehyun Kim, Yonghwan Oh, Myotaeg Lim, Yisoo Lee
published similarity 0.73
Abstract · 8 pages, 6 figures. Accepted to the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

This study proposes a novel Model Predictive Path Integral (MPPI)-based task-space control framework. The proposed framework explicitly solves rigid-body dynamics within a real-time MPC formulation and enforces safety constraints, enabling accurate motion and force control that yields compliant behaviors for safe and effective physical interaction of robotic manipulators in unstructured environments. By leveraging MPPI, the proposed framework efficiently handles nonlinear dynamics that are difficult to solve with conventional MPC approaches in real-time. Furthermore, we develop a torque-sampling-based control architecture that enables efficient exploitation of GPU-based parallelization, resulting in effective compliant and force-aware behaviors. As a result, the proposed framework achieves a solver update rate of over 166 Hz with a 0.18 s prediction horizon, and its performance is validated through real-world experiments on a 7-DoF manipulator.

0.38

Task-Space Motion-Force Nonlinear Model Predictive Control for Precise and Compliant Control under Uncertainties

cs.RO ·2026-10-12 ·Quang-Nam Nguyen, Ludovic Righetti
hot direction similarity 0.68
Abstract

In Nonlinear Model Predictive Control (NMPC), the control law is implicitly determined by the solution of an Optimal Control Problem (OCP). Consequently, OCP design is often tailored to specific platforms and tasks, demanding extensive expert knowledge and tuning effort. To address this, we propose a unified NMPC framework that directly plans and controls the robot joints subject to task-space motion and force requirements and is capable of seamlessly generalizing across multiple robotic platforms and diverse tasks. Furthermore, optimization-based methods often treat interactions as rigid contacts, making the torque solution sensitive to the modeling errors of the robot dynamics and the environment. We study the intrinsic task-space impedance of our proposed controller, its partial contraction for differential stability and differential passivity under unmodeled interactions. As a result, our framework enables closing the force-feedback loop in the high-level planning layer to achieve precise motion-force tracking performance, addressing the long-standing challenge of force-feedback NMPC. Finally, we validate our framework on physical hardware, demonstrating hybrid motion-force control on a redundant manipulator and compliant locomotion on a quadruped, while preserving core NMPC advantages such as hard constraint satisfaction, optimal redundancy exploitation, and real-time planning under unforeseen interactions.

0.42

RoKON: Efficient and Adaptive Data-Enabled Predictive Control for Robotic Manipulation

cs.RO ·2026-10-26 ·Akshun Sharma, Zhongqi Wei, Buqing Ou, Frederike Dümbgen
similarity 0.68
Abstract · 8 pages, 3 figures

Data-enabled predictive control has recently emerged as a promising control paradigm, enabling a transparent optimal-control formulation without the need to learn an explicit dynamics model. This paper presents a number of extensions paving the path towards its use in real-time robotics tasks. Following recent work, we utilize a nonlinear predictor based on Gaussian kernels to represent the relationship between input and output data. We propose a damped Gauss-Newton method that enables real-time control by efficiently exploiting the least-squares structure of the control problem. In addition, we introduce a hybrid buffer management strategy that incorporates informative online data while retaining relevant offline data, allowing the predictor to account for changes in the dynamics. We demonstrate the tracking performance and computational suitability of the proposed method in MuJoCo using a Franka Research 3 arm pushing a block across surface, without prior knowledge of its changing friction values.

0.45

MR-MPCC: Model Predictive Contouring Control for Robotic Manipulator Tracking under Moving Reference Frames

cs.RO ·2026-10-15 ·Chonghao Cheng, Tiancheng Li, Jonathan Woolfrey, Liang Zhao, Shoudong Huang
published similarity 0.66
Abstract · Accepted by The IEEE/RSJ International Conference on Intelligent Robots and Systems 2026 (IROS 2026)

Maintaining small path-tracking errors under moving reference frames is essential for robotic manipulation tasks with tight execution tolerances, such as machining and surgical automation. Conventional time-indexed controllers, including tracking Model Predictive Control (MPC), rely on a fixed temporal correspondence with the reference trajectory and may therefore accumulate path-relative error under abrupt reference-frame motion or timing mismatch. This paper presents MR-MPCC, a Model Predictive Contouring Control (MPCC) framework for velocity-controlled robotic manipulators with 6-DoF end-effector pose regulation under Moving-Reference disturbances. A hierarchical control architecture is adopted, in which an upper-level MPCC optimizes path progress while penalizing contouring and orientation errors, and a constrained resolved motion rate control (RMRC) layer maps the commanded Cartesian twist to feasible joint velocities under joint-level and safety constraints. MR-MPCC is implemented in a ROS2--MuJoCo pipeline and validated on a UR5e platform under moving-reference disturbances, where the path frame is perturbed and tracked by electromagnetic sensors. Compared with PI control and time-indexed tracking MPC under matched disturbance, MR-MPCC achieves lower geometric path-following error and smaller deviations in the moving path frame, demonstrating improved path-following performance under reference-frame motion.

0.44

Wheel-loader V-Cycle Automation with Deep Koopman MPC

cs.RO eess.SY ·2026-09-22 ·Armin Abdolmohammadi, Navid Mojahed, Dinesh Kumar, Bahram Ravani, Shima Nazari
similarity 0.65
Abstract · 8 pages, 4 figure

The repeated forward-reverse maneuvers performed by wheel loaders during earthmoving operations make them well suited for automation. However, the nonlinear dynamics of articulated vehicles and complex vehicle-terrain interactions limit the effectiveness of conventional model-based approaches. This paper presents a hierarchical framework that combines long-horizon geometric planning with data-driven predictive control for autonomous wheel-loader operation. A reduced-order articulated kinematic model is used to generate the maneuver geometry, where the forward and reverse trajectories are jointly optimized through a shared intermediate state. To capture the vehicle dynamics, two data-driven deep bilinear Koopman models are learned for the forward and reverse motions using data generated from high-fidelity simulations in Algoryx Dynamics. The learned Koopman representations are subsequently incorporated into a computationally efficient model predictive control (MPC) formulation for trajectory tracking. The resulting controller operates in real time within a 50-ms execution loop. High-fidelity simulation results demonstrate that the proposed end-to-end framework enables accurate and computationally efficient execution of wheel-loader V-cycle maneuvers, providing a promising approach toward autonomous operation of articulated heavy-duty machinery.

0.26

Real-Time Control-Constrained DDP for Underactuated Balancing of Legged Robots

cs.RO math.OC ·2026-08-19 ·SeongWon Nam, Hyunyong Lee, Hansol Kang, Jiman Park, Yeongwoo Son +3 more
top venue similarity 0.65
Abstract · This version includes a minor correction to the notation in Eq. (2)

This paper presents a real-time control-constrained Differential Dynamic Programming (DDP) framework for underactuated legged robots. To address the limitation of classical DDP in handling control constraints, we propose an Accelerated Projected Gradient (APG)-based control-constrained DDP (ABC-DDP), which efficiently computes constrained solutions and identifies active sets without repeated Karush-Kuhn-Tucker (KKT) inversions. A virtual constraint is introduced to integrate control constraints within a feasibility-driven multiple-shooting framework, enabling stable optimization even from dynamically infeasible initializations. The proposed method supports real-time model predictive control (MPC) with short horizons under strong underactuation. Simulation results demonstrate static two-leg standing under external disturbances, along with diverse dynamic motions including slow catwalk, upright walking, and high-speed running within a unified MPC framework. To the best of our knowledge, this is the first demonstration of static two-leg standing of a quadruped robot achieved using real-time finite-horizon MPC.

0.43

Real-Time Nonlinear MPC via Sequential Quadratic Programming with Structure-Exploiting ADMM and Interior-Point Methods for Underactuated Double-Pendulum Swing-Up

eess.SY cs.RO ·2026-08-10 ·Nick Karydakis, Konstantinos Chatzilygeroudis
similarity 0.64
Abstract · 6 pages, 4 figures, 1 table, finalist in the 4th AI Olympics with RealAIGym (https://ai-olympics.dfki-bremen.de)

The 4th "AI Olympics with RealAIGym" competition, to be held at IJCAI-ECAI 2026 in Bremen, challenges participants to develop a global control policy for swinging up and stabilizing an underactuated two-link system in its upright position. In contrast to previous editions, participants develop and evaluate their control strategies directly on remotely accessible CloudPendulum hardware, with limited interaction time and without prior knowledge of the system's model parameters. This paper presents an optimal-control-based approach employing real-time nonlinear model predictive control implemented using sequential quadratic programming. The results demonstrate that the proposed SQP-based MPC controller achieves reliable swing-up and stabilization performance, while maintaining robustness against disturbances.

0.20

DR-MPC: Fast and Feasible Dynamics-Relaxed Model-Predictive Control for Legged Locomotion

cs.RO eess.SY ·2026-09-17 ·Run Wang, Alapati Tuerxun, Shuo Liu, Wei Xiao, Ján Drgoňa +2 more
code/data similarity 0.64
Abstract · 8 pages, 5 figures, submitted to RA-L

This paper presents dynamics-relaxed model predictive control (DR-MPC), a novel MPC formulation for legged locomotion, and a tailored interior-point method (IPM) solver. The formulation combines online optimization feasibility by construction with a contact-aware input parameterization. DR-MPC moves the dynamics equality and affine input constraints into quadratic penalties and retains only nonempty box constraints. The resulting box-constrained quadratic program (QP) has a block-arrow Hessian that enables the state and affine-output directions to be eliminated through a Schur complement. The solver factors only the reduced control system after swing-force elimination and contact-aligned move blocking. For the evaluated implementations using the same DR-MPC formulation, our method achieves median end-to-end MPC speedups of $16.0\times$ over HPIPM and $4.4\times$ over OSQP, with comparable locomotion performance in simulation. DR-MPC achieves a median onboard MPC end-to-end time of $4.4$ ms and is validated on a Unitree Go1 quadruped. Open-source code will be made available after publication.

0.27