CS Paper Radar

Orientation Control of Soft Robots via Adiabatic Spectral Submanifolds

Aron Karakai, Roshan S. Kaundinya, Mike Yan Michelis, Robert Katzschmann, George Haller

cs.RO eess.SY ·submitted 2026-09-13 08:17 UTC · v1
published

Abstract

Soft robots are commonly sought for safety-critical interactions in delicate environments, where accurate position and orientation control is imperative. Model predictive control (MPC) offers a solution, but it requires a model of the robot's infinite-dimensional nonlinear dynamics that is at once accurate and computationally cheap. Recent theory on adiabatic spectral submanifolds (aSSMs) and their applications to soft robots provide data-driven model-reduction methods to construct such models. Here, we extend these methods to identify aSSMs from enlarged observable datasets and upgrade the currently available aSSM-MPC schemes. Evaluated on a high-fidelity finite-element simulation of a pressure-actuated soft arm, our controller reduces position and orientation tracking error by more than 60% compared to existing data-driven baselines.

Comment
This paper has been accepted for presentation at the 2026 IEEE Conference on Decision and Control (CDC)

Closest papers

Nearest neighbours by meaning across the whole index.

Data-Driven Precision Control of Soft Helicoid Robots

cs.RO cs.LGmath.DS ·2026-11-09 ·Roshan S. Kaundinya, Mark Leone, Roberto Sabella, Hugo Buurmeijer, Luis Pabon +3 more
similarity 0.76
Abstract · Submitted to npj Robotics. 44 pages, supplementary information included

A purely data-driven method grounded in the theory of adiabatic spectral submanifolds (aSSMs) was recently used to model and control nonlinear soft robotic simulators. Here, we extend the methodology to learn aSSM-reduced models from data collected from hardware soft robotic platforms. Specifically, we learn a five dimensional (5D) aSSM-reduced nonlinear ordinary differential equation (ODE) that accurately models the dynamics of a soft-helicoid trunk robot. We then use this ODE in a model predictive control scheme to demonstrate real-time precision control across various challenging closed-loop trajectory-tracking tasks, ranging from 2D to 3D trajectories with static and dynamic constraints. We find that our methodology enhances accuracy and precision across all control tasks compared to available data-driven linear methods and model-free reinforcement learning. While we focus here on a soft-helicoid trunk robot, our methodology relies solely on hardware data and is therefore applicable to a broader class of soft robotic systems.

0.42

Dynamic Shape Control of Soft Trunk Robots

cs.RO ·2026-11-04 ·Hehui Zheng, Marc Stampanoni, Roshan S. Kaundinya, Ronan Hinchet, George Haller +1 more
similarity 0.74
Abstract

Controlling the shape profile of soft trunk robots extends their reach into complex regions of the workspace and enhances their use in practical applications. Recent advances in soft robot design have enabled soft trunk robots to achieve greater flexibility in conforming to complex shapes. Specifically, trunk robots whose geometries are designed as helicoids have been shown to enable extreme shape-changing capabilities. Their compliance makes them highly nonlinear, which in turn makes shape control difficult. On similar tendon-driven trunk robots, model-based controllers based on the theory of adiabatic spectral submanifolds (aSSMs) have achieved high accuracy in closed-loop end-effector tracking. We extend this approach by learning an aSSM model of the full body of a trimmed-helicoid soft trunk robot from data and use this in a model predictive control (MPC) scheme to demonstrate a range of shape control tasks on hardware. On closed-loop dynamic shape regulation, our method outperforms the available linear baselines by a factor of 10. In human-in-the-loop interactive demos, our method completes section-by-section shaping and balances a tennis ball for over 25 seconds, while the linear baselines fall short. A model-free reinforcement learning policy trained for 12 hours on hardware fails on the same balancing task. These results establish aSSM-based MPC as a practical route to full-body shape control on real soft hardware.

0.21

Stabilizing Low-Stiffness Soft Robots at Unstable Equilibria: A Model-Based Optimal Control Approach

eess.SY ·2026-10-12 ·Nikhil Nair, Daniele Caradonna, Anup Teejo Mathew, Federico Renda, Cosimo Della Santina +1 more
similarity 0.70
Abstract · 7 pages, 6 figures

Continuum soft robots are highly nonlinear and underactuated systems, which makes stabilizing them around unstable equilibrium points difficult. This challenge becomes even greater in low stiffness regimes, where gravitational forces dominate elastic forces. In this letter, we explore whether optimal control can address these challenges using a computa- tionally efficient method suitable for real time use. We propose a nonlinear model predictive control (NMPC) approach based on Differential Dynamic Programming (DDP), combined with an accurate reduced order Variable Strain model with analytical derivatives. This results in an efficient control framework for addressing the stabilization problem. Tested on a soft inverted pendulum and other hybrid soft rigid systems, the method outperforms traditional controllers, stabilizes more challenging configurations, and operates reliably at real time speeds (50 150 Hz), demonstrating both effectiveness and practical feasibility in experimental settings.

0.26

Accelerated Reinforcement Learning for Soft Robotics: Hours Instead of Years

cs.RO cs.AIcs.LGmath.DS ·2026-11-09 ·Roshan S. Kaundinya, Hehui Zheng, Robert K. Katzschmann, George Haller
similarity 0.69
Abstract · 25 pages, 6 figures, 3 extended data figures

Reinforcement learning (RL) requires large amounts of interaction data or a reliable simulator, both hard to obtain for nonlinear soft robotic hardware. Recent work shows that a time-scale separation inherent to soft robot dynamics justifies their reduction to low-dimensional invariant manifolds, known as adiabatic spectral submanifolds (aSSMs). We demonstrate that an aSSM-reduced model, a simple polynomial ordinary differential equation learned purely from pre-collected data, can serve as an RL training environment. On a pneumatically actuated soft arm, we train a trajectory-tracking policy in 3 hours on a six-dimensional aSSM-reduced model and deploy it without fine-tuning, whereas reproducing this policy training extrapolates to 3 years of hardware interaction. Our policy tracks dynamic targets with 40% lower error than otherwise identical policies trained on a 4.8-million-parameter recurrent neural network (RNN) or a 1.7-million-parameter transformer, which take 13 and 100 hours to identify, against 5 minutes for our mathematically justified 6,924-parameter model.

0.23

Learning-Based Pressure Predictive Control of a Vertebraic Soft Robotic Tail

cs.RO ·2026-09-24 ·Wenjian Yang, Nan Huang, Yukang Nie, Fang Chen, Wanchao Chi +2 more
similarity 0.67
Abstract

Soft robots have attracted much attention for their safe human-robot interaction and flexibility, but the typical continuum structure and nonlinear material behavior make the kinematics modelling complex, especially in non-static motions. In this work, we proposed an LSTM-based pressure predictive control (PPC) for the motion control of a vertebraic soft robotic tail and the coordination with a quadruped robot. The PPC consists of an inverse kinematics (IK) model, a forward kinematics (FK) model and a pressure compensation (P-comp) model, and achieves non-static and quasi-static motion control of the tail. Compared with the IK-only model, the average RMSE of the PPC's simulation trajectories reduces by 69.8%, when executing target trajectories. In the coordinated motions of the soft tail quadruped, using a prediction data set to train the PPC enables next-moment action prediction and reduces computation time by 60.9%, which enhances the real-time response of the tail to match the quadruped torso's moving rate. The PPC provides a simple and effective method to model the soft tail for both non-static and quasi-static motion control, and grants the soft tail quadruped with the functionality of interacting with the environment.

0.25

Real-Time Shape Control of Multi-Segment Soft Robotic Arms Using Koopman Operators with Global and Local Observables

cs.RO eess.SY ·2026-09-02 ·Jiahe Wang, Eron Ristich, Sultan Haidar Ali, Eric weissman, Lei Zhang +3 more
similarity 0.65
Abstract · 18 pages, 14 figures, submitted to TRO

Multi-segment soft robotic arms can continuously reconfigure their body shapes for safe interaction, but tip control alone is insufficient for constrained-space tasks. Therefore, shape control is a more important task for multi-segment soft arms than tip control, but remains challenging due to the high dimensionality and nonlinear dynamics of continuum deformation. In existing work, shape control accuracy is defined by the error in the global frame (global shape error). For multi-segment soft arms, using only global shape error as the control objective is insufficient, as segment coupling, gravity-induced loading, and inertial effects become more significant. This difficulty increases with the number of segments. In this paper, we present a Koopman-based model predictive control framework that combines global and local observables, enabling real-time shape control on multi-segment soft robotic arms. The framework is evaluated through numerical and physical experiments. Numerical experiments demonstrate the scalability of the proposed controller by achieving shape control on robots with up to 10 independently actuated segments. The physical experiments demonstrate that the controller is capable of (1) real-time shape control of 3- and 5-segment robotic arms with tip speeds up to 0.6 m/s, (2) robust tracking without retraining, including distal payloads up to 400~g and recovery from a 7~N lateral disturbance, and (3) the potential for future inspection applications through a confined-space demonstration. These results demonstrate that the proposed framework enables dynamic, scalable, and accurate real-time shape control on multi-segment soft robotic arms.

0.35

RoKON: Efficient and Adaptive Data-Enabled Predictive Control for Robotic Manipulation

cs.RO ·2026-10-26 ·Akshun Sharma, Zhongqi Wei, Buqing Ou, Frederike Dümbgen
similarity 0.65
Abstract · 8 pages, 3 figures

Data-enabled predictive control has recently emerged as a promising control paradigm, enabling a transparent optimal-control formulation without the need to learn an explicit dynamics model. This paper presents a number of extensions paving the path towards its use in real-time robotics tasks. Following recent work, we utilize a nonlinear predictor based on Gaussian kernels to represent the relationship between input and output data. We propose a damped Gauss-Newton method that enables real-time control by efficiently exploiting the least-squares structure of the control problem. In addition, we introduce a hybrid buffer management strategy that incorporates informative online data while retaining relevant offline data, allowing the predictor to account for changes in the dynamics. We demonstrate the tracking performance and computational suitability of the proposed method in MuJoCo using a Franka Research 3 arm pushing a block across surface, without prior knowledge of its changing friction values.

0.45

Full-Order Safety for Nonlinear Reduced-Order MPC

cs.RO eess.SYmath.OC ·2026-10-13 ·Luis Pabon, Johannes Köhler, Revant Kasichainula, Marco Pavone
code/data similarity 0.62
Abstract · 8 pages, 4 figures

Reduced-order models (ROMs) make model predictive control (MPC) of high-dimensional nonlinear systems tractable, but the resulting modeling error can lead to constraint violations on the real system. We introduce CoRE-MPC, a robust MPC formulation that plans with a nonlinear ROM and guarantees recursive feasibility and constraint satisfaction for the full-order system. It can be applied with a broad class of nonlinear model reduction techniques and the resulting MPC does not require evaluating the full-order model online, thus ensuring computational efficiency. The key insight is in how the ROM affects the dynamics of the prediction error. We account for this with two error radii that are propagated alongside the ROM and provide a guaranteed bound on the prediction error. The approach is validated in simulation on an 80-state oscillator chain, a Burgers equation, and a 9,768-state finite-element soft robot, where a two-state ROM with data-driven bounds keeps all 1,628 nodes clear of a wall at a median solve time below 1 ms for a 20 ms control period. Across these examples, CoRE-MPC is 13 to 61 times faster than full-order robust MPC at only 27 to 35% higher closed-loop cost, whereas existing certified schemes are either infeasible or at least twice as conservative. Code: [released upon publication].

0.41