CS Paper Radar

Data-Driven Precision Control of Soft Helicoid Robots

Roshan S. Kaundinya, Mark Leone, Roberto Sabella, Hugo Buurmeijer, Luis Pabon, John Irvin Alora, Marco Pavone, George Haller

cs.RO cs.LGmath.DS ·submitted 2026-11-09 00:09 UTC · v1

Abstract

A purely data-driven method grounded in the theory of adiabatic spectral submanifolds (aSSMs) was recently used to model and control nonlinear soft robotic simulators. Here, we extend the methodology to learn aSSM-reduced models from data collected from hardware soft robotic platforms. Specifically, we learn a five dimensional (5D) aSSM-reduced nonlinear ordinary differential equation (ODE) that accurately models the dynamics of a soft-helicoid trunk robot. We then use this ODE in a model predictive control scheme to demonstrate real-time precision control across various challenging closed-loop trajectory-tracking tasks, ranging from 2D to 3D trajectories with static and dynamic constraints. We find that our methodology enhances accuracy and precision across all control tasks compared to available data-driven linear methods and model-free reinforcement learning. While we focus here on a soft-helicoid trunk robot, our methodology relies solely on hardware data and is therefore applicable to a broader class of soft robotic systems.

Comment
Submitted to npj Robotics. 44 pages, supplementary information included

Closest papers

Nearest neighbours by meaning across the whole index.

Dynamic Shape Control of Soft Trunk Robots

cs.RO ·2026-11-04 ·Hehui Zheng, Marc Stampanoni, Roshan S. Kaundinya, Ronan Hinchet, George Haller +1 more
similarity 0.81
Abstract

Controlling the shape profile of soft trunk robots extends their reach into complex regions of the workspace and enhances their use in practical applications. Recent advances in soft robot design have enabled soft trunk robots to achieve greater flexibility in conforming to complex shapes. Specifically, trunk robots whose geometries are designed as helicoids have been shown to enable extreme shape-changing capabilities. Their compliance makes them highly nonlinear, which in turn makes shape control difficult. On similar tendon-driven trunk robots, model-based controllers based on the theory of adiabatic spectral submanifolds (aSSMs) have achieved high accuracy in closed-loop end-effector tracking. We extend this approach by learning an aSSM model of the full body of a trimmed-helicoid soft trunk robot from data and use this in a model predictive control (MPC) scheme to demonstrate a range of shape control tasks on hardware. On closed-loop dynamic shape regulation, our method outperforms the available linear baselines by a factor of 10. In human-in-the-loop interactive demos, our method completes section-by-section shaping and balances a tennis ball for over 25 seconds, while the linear baselines fall short. A model-free reinforcement learning policy trained for 12 hours on hardware fails on the same balancing task. These results establish aSSM-based MPC as a practical route to full-body shape control on real soft hardware.

0.21

Accelerated Reinforcement Learning for Soft Robotics: Hours Instead of Years

cs.RO cs.AIcs.LGmath.DS ·2026-11-09 ·Roshan S. Kaundinya, Hehui Zheng, Robert K. Katzschmann, George Haller
similarity 0.78
Abstract · 25 pages, 6 figures, 3 extended data figures

Reinforcement learning (RL) requires large amounts of interaction data or a reliable simulator, both hard to obtain for nonlinear soft robotic hardware. Recent work shows that a time-scale separation inherent to soft robot dynamics justifies their reduction to low-dimensional invariant manifolds, known as adiabatic spectral submanifolds (aSSMs). We demonstrate that an aSSM-reduced model, a simple polynomial ordinary differential equation learned purely from pre-collected data, can serve as an RL training environment. On a pneumatically actuated soft arm, we train a trajectory-tracking policy in 3 hours on a six-dimensional aSSM-reduced model and deploy it without fine-tuning, whereas reproducing this policy training extrapolates to 3 years of hardware interaction. Our policy tracks dynamic targets with 40% lower error than otherwise identical policies trained on a 4.8-million-parameter recurrent neural network (RNN) or a 1.7-million-parameter transformer, which take 13 and 100 hours to identify, against 5 minutes for our mathematically justified 6,924-parameter model.

0.23

Orientation Control of Soft Robots via Adiabatic Spectral Submanifolds

cs.RO eess.SY ·2026-09-13 ·Aron Karakai, Roshan S. Kaundinya, Mike Yan Michelis, Robert Katzschmann, George Haller
published similarity 0.76
Abstract · This paper has been accepted for presentation at the 2026 IEEE Conference on Decision and Control (CDC)

Soft robots are commonly sought for safety-critical interactions in delicate environments, where accurate position and orientation control is imperative. Model predictive control (MPC) offers a solution, but it requires a model of the robot's infinite-dimensional nonlinear dynamics that is at once accurate and computationally cheap. Recent theory on adiabatic spectral submanifolds (aSSMs) and their applications to soft robots provide data-driven model-reduction methods to construct such models. Here, we extend these methods to identify aSSMs from enlarged observable datasets and upgrade the currently available aSSM-MPC schemes. Evaluated on a high-fidelity finite-element simulation of a pressure-actuated soft arm, our controller reduces position and orientation tracking error by more than 60% compared to existing data-driven baselines.

0.47

Learning the Right Abstraction: Neural Reduced Dynamics for Complex Robot Control

cs.RO ·2026-08-19 ·Harry Zhang, Dan Negrut
similarity 0.65
Abstract

High-fidelity embodied AI simulators provide realistic evaluation of complex robotic systems, but their computational cost limits their direct use for large-scale reinforcement learning campaigns. We advocate the use of less accurate but more expeditious simulations, which might draw on data-driven, e.g., neural dynamics, models. This contribution argues that the practical value of a neural dynamics model for complex robot control lies in learning the \emph{right abstraction}: a reduced state that preserves the control-relevant physics of the high-fidelity system while enabling high-throughput policy learning. We develop a neural reduced dynamics (NRD) framework that separates the state the model propagates from what can be supplied as an input or recovered analytically, trains policies entirely inside the frozen learned model, and validates them back in the high-fidelity simulator. Two case studies instantiate it across three control tasks: terrain-aware HMMWV trajectory tracking on rigid, bumpy and deformable Continuum Representation Model (CRM) terrain; and goal reaching for a stock tracked vehicle and its front-mounted articulated arm. Every policy transfers back to the high-fidelity simulator. A single policy trained inside the terrain-conditioned dynamics model, and given no terrain input of its own, attains lower median and mean tracking error than both single-terrain specialists on all three terrains, including zero-shot bumpy terrain. Quantitatively, the tracked vehicle reaches 100 of 100 goals and the arm 97 of 100, with zero contacts or joint-limit violations. The NRD models advance roughly four orders of magnitude faster in simulated time than the high-fidelity simulator scenes they replace, making iterative on-policy learning practical and supporting neural reduced dynamics as a bridge between accurate but expensive physics simulation and scalable robot learning.

0.45

Stabilizing Low-Stiffness Soft Robots at Unstable Equilibria: A Model-Based Optimal Control Approach

eess.SY ·2026-10-12 ·Nikhil Nair, Daniele Caradonna, Anup Teejo Mathew, Federico Renda, Cosimo Della Santina +1 more
similarity 0.64
Abstract · 7 pages, 6 figures

Continuum soft robots are highly nonlinear and underactuated systems, which makes stabilizing them around unstable equilibrium points difficult. This challenge becomes even greater in low stiffness regimes, where gravitational forces dominate elastic forces. In this letter, we explore whether optimal control can address these challenges using a computa- tionally efficient method suitable for real time use. We propose a nonlinear model predictive control (NMPC) approach based on Differential Dynamic Programming (DDP), combined with an accurate reduced order Variable Strain model with analytical derivatives. This results in an efficient control framework for addressing the stabilization problem. Tested on a soft inverted pendulum and other hybrid soft rigid systems, the method outperforms traditional controllers, stabilizes more challenging configurations, and operates reliably at real time speeds (50 150 Hz), demonstrating both effectiveness and practical feasibility in experimental settings.

0.26

Differentiable Iterative Learning Control for Black-Box Position-Commanded Manipulators

cs.RO eess.SY ·2026-10-31 ·Mohammed Al-Ghaili, Yakoop Qasim, Hassan Almubarak
similarity 0.64
Abstract

High-accuracy repetitive tracking is challenging for position-commanded manipulators whose low-level controllers are inaccessible, while constrained model-based iterative learning control (ILC) can require substantial manual parameter tuning. We present Differentiable Iterative Learning Control (Diff-ILC), an online bilevel framework that adapts the parameters of a constrained ILC update between physical robot executions. A closed-loop differential model is identified once from paired smooth perturbations and subsequently kept fixed. At each trial, a constrained quadratic program computes a feasible command correction, while a real-anchored next-trial prediction defines a task-level objective. Hypergradients are obtained by implicitly differentiating the locally active KKT system, enabling multiple computational parameter updates without additional robot executions. Experiments on a 6-DoF DOBOT CR3 across unseen planar and three-dimensional trajectories show substantially faster physical-trial convergence than fixed-parameter model-based ILC. Across the four primary trajectories, after only two trial-to-trial updates, Diff-ILC achieves 78.8% and 76.4% lower mean joint-vector and Cartesian RMSE, respectively, than fixed-parameter model-based ILC.

0.19

Learning the Dynamics of Deformable Linear Objects Through Coupled Oscillators for Bimanual Robotic Manipulation

cs.RO ·2026-11-17 ·Iván López-Broceño, Maximilian Stölzle, Daniel Feliu-Talegon, Daniela Rus, Cosimo Della Santina
similarity 0.64
Abstract

Many learning-based approaches for deformable linear objects (DLOs) rely on simplified deformation models that neglect dynamic effects and the mechanical response of the objects, limiting their applicability to lightweight, compliant objects and slow motions. Inspired by recent advances in learning physically structured dynamics with coupled oscillator networks (CONs), we propose $Φ$-CON for learning force-driven DLO dynamics. The model combines a floating-base coupled oscillator network (FBCON), whose latent potential energy depends only on the DLO's shape, with a learned affine diffeomorphism $Φ$ between observed positions along the DLO and latent coordinates. Its shape dynamics are stable by construction, and its Lagrangian structure yields explicit expressions for kinetic and potential energy. We exploit this structure to design a model-based proportional-derivative (PD) controller that compensates for the learned potential forces, thereby establishing closed-loop stability guarantees and ensuring convergence. We evaluate the approach on four simulated DLOs and a real bimanual robot setup. In simulation, $Φ$-CON achieves prediction accuracy comparable to neural ordinary differential equation (NODE) models and Lagrangian neural networks (LNNs), with $97.2\%$ and $90.2\%$ fewer parameters, respectively. Relative to a model-free PD baseline, the proposed controller reduces mean endpoint regulation error by $97.5$-$99.7\%$ in simulation and achieves a mean per-target reduction of $27.9\%$ across both endpoints in real-world experiments, demonstrating the importance of explicitly accounting for the mechanical response of stiff and heavy objects.

0.25

Wheel-loader V-Cycle Automation with Deep Koopman MPC

cs.RO eess.SY ·2026-09-22 ·Armin Abdolmohammadi, Navid Mojahed, Dinesh Kumar, Bahram Ravani, Shima Nazari
similarity 0.62
Abstract · 8 pages, 4 figure

The repeated forward-reverse maneuvers performed by wheel loaders during earthmoving operations make them well suited for automation. However, the nonlinear dynamics of articulated vehicles and complex vehicle-terrain interactions limit the effectiveness of conventional model-based approaches. This paper presents a hierarchical framework that combines long-horizon geometric planning with data-driven predictive control for autonomous wheel-loader operation. A reduced-order articulated kinematic model is used to generate the maneuver geometry, where the forward and reverse trajectories are jointly optimized through a shared intermediate state. To capture the vehicle dynamics, two data-driven deep bilinear Koopman models are learned for the forward and reverse motions using data generated from high-fidelity simulations in Algoryx Dynamics. The learned Koopman representations are subsequently incorporated into a computationally efficient model predictive control (MPC) formulation for trajectory tracking. The resulting controller operates in real time within a 50-ms execution loop. High-fidelity simulation results demonstrate that the proposed end-to-end framework enables accurate and computationally efficient execution of wheel-loader V-cycle maneuvers, providing a promising approach toward autonomous operation of articulated heavy-duty machinery.

0.26