CS Paper Radar

Dynamic Shape Control of Soft Trunk Robots

Hehui Zheng, Marc Stampanoni, Roshan S. Kaundinya, Ronan Hinchet, George Haller, Robert K. Katzschmann

cs.RO ·submitted 2026-11-04 15:09 UTC · v2

Abstract

Controlling the shape profile of soft trunk robots extends their reach into complex regions of the workspace and enhances their use in practical applications. Recent advances in soft robot design have enabled soft trunk robots to achieve greater flexibility in conforming to complex shapes. Specifically, trunk robots whose geometries are designed as helicoids have been shown to enable extreme shape-changing capabilities. Their compliance makes them highly nonlinear, which in turn makes shape control difficult. On similar tendon-driven trunk robots, model-based controllers based on the theory of adiabatic spectral submanifolds (aSSMs) have achieved high accuracy in closed-loop end-effector tracking. We extend this approach by learning an aSSM model of the full body of a trimmed-helicoid soft trunk robot from data and use this in a model predictive control (MPC) scheme to demonstrate a range of shape control tasks on hardware. On closed-loop dynamic shape regulation, our method outperforms the available linear baselines by a factor of 10. In human-in-the-loop interactive demos, our method completes section-by-section shaping and balances a tennis ball for over 25 seconds, while the linear baselines fall short. A model-free reinforcement learning policy trained for 12 hours on hardware fails on the same balancing task. These results establish aSSM-based MPC as a practical route to full-body shape control on real soft hardware.

Closest papers

Nearest neighbours by meaning across the whole index.

Data-Driven Precision Control of Soft Helicoid Robots

cs.RO cs.LGmath.DS ·2026-11-09 ·Roshan S. Kaundinya, Mark Leone, Roberto Sabella, Hugo Buurmeijer, Luis Pabon +3 more
similarity 0.81
Abstract · Submitted to npj Robotics. 44 pages, supplementary information included

A purely data-driven method grounded in the theory of adiabatic spectral submanifolds (aSSMs) was recently used to model and control nonlinear soft robotic simulators. Here, we extend the methodology to learn aSSM-reduced models from data collected from hardware soft robotic platforms. Specifically, we learn a five dimensional (5D) aSSM-reduced nonlinear ordinary differential equation (ODE) that accurately models the dynamics of a soft-helicoid trunk robot. We then use this ODE in a model predictive control scheme to demonstrate real-time precision control across various challenging closed-loop trajectory-tracking tasks, ranging from 2D to 3D trajectories with static and dynamic constraints. We find that our methodology enhances accuracy and precision across all control tasks compared to available data-driven linear methods and model-free reinforcement learning. While we focus here on a soft-helicoid trunk robot, our methodology relies solely on hardware data and is therefore applicable to a broader class of soft robotic systems.

0.42

Orientation Control of Soft Robots via Adiabatic Spectral Submanifolds

cs.RO eess.SY ·2026-09-13 ·Aron Karakai, Roshan S. Kaundinya, Mike Yan Michelis, Robert Katzschmann, George Haller
published similarity 0.74
Abstract · This paper has been accepted for presentation at the 2026 IEEE Conference on Decision and Control (CDC)

Soft robots are commonly sought for safety-critical interactions in delicate environments, where accurate position and orientation control is imperative. Model predictive control (MPC) offers a solution, but it requires a model of the robot's infinite-dimensional nonlinear dynamics that is at once accurate and computationally cheap. Recent theory on adiabatic spectral submanifolds (aSSMs) and their applications to soft robots provide data-driven model-reduction methods to construct such models. Here, we extend these methods to identify aSSMs from enlarged observable datasets and upgrade the currently available aSSM-MPC schemes. Evaluated on a high-fidelity finite-element simulation of a pressure-actuated soft arm, our controller reduces position and orientation tracking error by more than 60% compared to existing data-driven baselines.

0.46

Real-Time Shape Control of Multi-Segment Soft Robotic Arms Using Koopman Operators with Global and Local Observables

cs.RO eess.SY ·2026-09-02 ·Jiahe Wang, Eron Ristich, Sultan Haidar Ali, Eric weissman, Lei Zhang +3 more
similarity 0.71
Abstract · 18 pages, 14 figures, submitted to TRO

Multi-segment soft robotic arms can continuously reconfigure their body shapes for safe interaction, but tip control alone is insufficient for constrained-space tasks. Therefore, shape control is a more important task for multi-segment soft arms than tip control, but remains challenging due to the high dimensionality and nonlinear dynamics of continuum deformation. In existing work, shape control accuracy is defined by the error in the global frame (global shape error). For multi-segment soft arms, using only global shape error as the control objective is insufficient, as segment coupling, gravity-induced loading, and inertial effects become more significant. This difficulty increases with the number of segments. In this paper, we present a Koopman-based model predictive control framework that combines global and local observables, enabling real-time shape control on multi-segment soft robotic arms. The framework is evaluated through numerical and physical experiments. Numerical experiments demonstrate the scalability of the proposed controller by achieving shape control on robots with up to 10 independently actuated segments. The physical experiments demonstrate that the controller is capable of (1) real-time shape control of 3- and 5-segment robotic arms with tip speeds up to 0.6 m/s, (2) robust tracking without retraining, including distal payloads up to 400~g and recovery from a 7~N lateral disturbance, and (3) the potential for future inspection applications through a confined-space demonstration. These results demonstrate that the proposed framework enables dynamic, scalable, and accurate real-time shape control on multi-segment soft robotic arms.

0.35

Collocated Shape Regulation for Soft Robots

cs.RO eess.SY ·2026-09-23 ·Pietro Pustina, Ebrahim Shahabi, Daniel Feliu-Talegon, Alessandro De Luca, Cosimo Della Santina
hot direction similarity 0.66
Abstract · 33 pages, 22 figures

Controlling the shape of a continuum soft robot typically requires an accurate dynamic model and actuation of all degrees of freedom. We show that regulating only the actuated coordinates, through collocated shape control, achieves provably stable convergence of those coordinates and, under an explicit compatibility condition, of the entire robot shape. While collocated control is a cornerstone of high-performance motion control in rigid robotics, extending this formulation to continuum soft robots has remained challenging due to the complexity of their dynamics. We present the first general framework for collocated control of continuum soft robots and derive a unified family of controllers, including PD, PID, PsatID, and their counterparts with compensation and cancellation components. The framework unifies existing approaches while introducing new controller designs. In particular, we develop three classes of PD and PID like regulators with local, semi-global, and global stability guarantees, and provide rigorous convergence analyses for each. Extensive experimental validation demonstrates the effectiveness of the proposed methods across different model discretizations and controller parameters. The resulting framework provides practical design guidelines for selecting and implementing controllers with known stability guarantees, without requiring a complete dynamic model of the robot

0.33

Learning-Based Pressure Predictive Control of a Vertebraic Soft Robotic Tail

cs.RO ·2026-09-24 ·Wenjian Yang, Nan Huang, Yukang Nie, Fang Chen, Wanchao Chi +2 more
similarity 0.65
Abstract

Soft robots have attracted much attention for their safe human-robot interaction and flexibility, but the typical continuum structure and nonlinear material behavior make the kinematics modelling complex, especially in non-static motions. In this work, we proposed an LSTM-based pressure predictive control (PPC) for the motion control of a vertebraic soft robotic tail and the coordination with a quadruped robot. The PPC consists of an inverse kinematics (IK) model, a forward kinematics (FK) model and a pressure compensation (P-comp) model, and achieves non-static and quasi-static motion control of the tail. Compared with the IK-only model, the average RMSE of the PPC's simulation trajectories reduces by 69.8%, when executing target trajectories. In the coordinated motions of the soft tail quadruped, using a prediction data set to train the PPC enables next-moment action prediction and reduces computation time by 60.9%, which enhances the real-time response of the tail to match the quadruped torso's moving rate. The PPC provides a simple and effective method to model the soft tail for both non-static and quasi-static motion control, and grants the soft tail quadruped with the functionality of interacting with the environment.

0.25

Geometric Shortcuts for Complex Trunk Postures: Dual-Helicity Coupling Enables Low-Dimensional Control

cs.RO ·2026-09-16 ·Huishi Huang, Danlu Chen, Matteo Lo Preti, Jun Liu, Marcelo H. Ang +1 more
similarity 0.62
Abstract

How do elephant trunks generate complex postures without relying solely on fine segmental activation? We propose that part of this complexity arises from a low-dimensional geometric shortcut: dual-helicity coupling between opposite-handed oblique muscles. In a simplified soft-robotic prototype, varying only two geometric parameters generates a broad library of elephant-like postures, suggesting a dual-layer control architecture with implications for continuum robot design and biological hypotheses.

0.20

Accelerated Reinforcement Learning for Soft Robotics: Hours Instead of Years

cs.RO cs.AIcs.LGmath.DS ·2026-11-09 ·Roshan S. Kaundinya, Hehui Zheng, Robert K. Katzschmann, George Haller
similarity 0.62
Abstract · 25 pages, 6 figures, 3 extended data figures

Reinforcement learning (RL) requires large amounts of interaction data or a reliable simulator, both hard to obtain for nonlinear soft robotic hardware. Recent work shows that a time-scale separation inherent to soft robot dynamics justifies their reduction to low-dimensional invariant manifolds, known as adiabatic spectral submanifolds (aSSMs). We demonstrate that an aSSM-reduced model, a simple polynomial ordinary differential equation learned purely from pre-collected data, can serve as an RL training environment. On a pneumatically actuated soft arm, we train a trajectory-tracking policy in 3 hours on a six-dimensional aSSM-reduced model and deploy it without fine-tuning, whereas reproducing this policy training extrapolates to 3 years of hardware interaction. Our policy tracks dynamic targets with 40% lower error than otherwise identical policies trained on a 4.8-million-parameter recurrent neural network (RNN) or a 1.7-million-parameter transformer, which take 13 and 100 hours to identify, against 5 minutes for our mathematically justified 6,924-parameter model.

0.23

Controlling Continuum Robot Shape in Enclosed Space with Embedded Sensing using IMU and Actuator Feedback

cs.RO ·2026-10-28 ·Jiahe Wang, Sultan Haidar Ali, Eric Weissman, Jiefeng Sun
similarity 0.62
Abstract · 8 pages, 7 figures

Controlling continuum robots' shape to operate in confined, enclosed environments is challenging, since it cannot rely on external observation. Existing embedded shape sensing methods, although they can provide shape reconstruction, are insufficient to enable real-time shape control due to limitations in reconstruction accuracy, computational speed, and compatibility with shape-state representation. In this work, we present an embedded shape-sensing framework that uses readily available IMU and actuator feedback to reconstruct the continuum-robot shape with a neural network, providing accurate shape feedback at $400~\mathrm{Hz}$ for physical closed-loop control. We systematically investigate four key reconstruction design choices: shape-state representation, network architecture, training objective, and sensing inputs, through more than $5{,}000$ trained models on one- and three-segment continuum robots. The selected framework achieves global shape errors of $0.9\%L$ and $1.7\%L$ (of the robot length) for the one- and three-segment systems, respectively. In closed-loop control, one-segment tip tracking achieves a $6.1\%L$ error and three-segment shape control achieves a $2.3\%L$ global shape error, whereas IMU--PCC reconstruction using the same uncompensated measurements fails. Enclosed-space experiments further demonstrate operation without external observation. These results provide a practical framework for translating readily available embedded sensing into high-rate feedback for continuum robot closed-loop control.

0.34