CS Paper Radar

Stabilizing Low-Stiffness Soft Robots at Unstable Equilibria: A Model-Based Optimal Control Approach

Nikhil Nair, Daniele Caradonna, Anup Teejo Mathew, Federico Renda, Cosimo Della Santina, Daniel Feliu-Talegon

eess.SY ·submitted 2026-10-12 18:50 UTC · v1

Abstract

Continuum soft robots are highly nonlinear and underactuated systems, which makes stabilizing them around unstable equilibrium points difficult. This challenge becomes even greater in low stiffness regimes, where gravitational forces dominate elastic forces. In this letter, we explore whether optimal control can address these challenges using a computa- tionally efficient method suitable for real time use. We propose a nonlinear model predictive control (NMPC) approach based on Differential Dynamic Programming (DDP), combined with an accurate reduced order Variable Strain model with analytical derivatives. This results in an efficient control framework for addressing the stabilization problem. Tested on a soft inverted pendulum and other hybrid soft rigid systems, the method outperforms traditional controllers, stabilizes more challenging configurations, and operates reliably at real time speeds (50 150 Hz), demonstrating both effectiveness and practical feasibility in experimental settings.

Comment
7 pages, 6 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Orientation Control of Soft Robots via Adiabatic Spectral Submanifolds

cs.RO eess.SY ·2026-09-13 ·Aron Karakai, Roshan S. Kaundinya, Mike Yan Michelis, Robert Katzschmann, George Haller
published similarity 0.70
Abstract · This paper has been accepted for presentation at the 2026 IEEE Conference on Decision and Control (CDC)

Soft robots are commonly sought for safety-critical interactions in delicate environments, where accurate position and orientation control is imperative. Model predictive control (MPC) offers a solution, but it requires a model of the robot's infinite-dimensional nonlinear dynamics that is at once accurate and computationally cheap. Recent theory on adiabatic spectral submanifolds (aSSMs) and their applications to soft robots provide data-driven model-reduction methods to construct such models. Here, we extend these methods to identify aSSMs from enlarged observable datasets and upgrade the currently available aSSM-MPC schemes. Evaluated on a high-fidelity finite-element simulation of a pressure-actuated soft arm, our controller reduces position and orientation tracking error by more than 60% compared to existing data-driven baselines.

0.47

Collocated Shape Regulation for Soft Robots

cs.RO eess.SY ·2026-09-23 ·Pietro Pustina, Ebrahim Shahabi, Daniel Feliu-Talegon, Alessandro De Luca, Cosimo Della Santina
hot direction similarity 0.67
Abstract · 33 pages, 22 figures

Controlling the shape of a continuum soft robot typically requires an accurate dynamic model and actuation of all degrees of freedom. We show that regulating only the actuated coordinates, through collocated shape control, achieves provably stable convergence of those coordinates and, under an explicit compatibility condition, of the entire robot shape. While collocated control is a cornerstone of high-performance motion control in rigid robotics, extending this formulation to continuum soft robots has remained challenging due to the complexity of their dynamics. We present the first general framework for collocated control of continuum soft robots and derive a unified family of controllers, including PD, PID, PsatID, and their counterparts with compensation and cancellation components. The framework unifies existing approaches while introducing new controller designs. In particular, we develop three classes of PD and PID like regulators with local, semi-global, and global stability guarantees, and provide rigorous convergence analyses for each. Extensive experimental validation demonstrates the effectiveness of the proposed methods across different model discretizations and controller parameters. The resulting framework provides practical design guidelines for selecting and implementing controllers with known stability guarantees, without requiring a complete dynamic model of the robot

0.33

Design Optimization for Large High-Force Soft Robot Manipulators Under Gravitational Loads

cs.RO ·2026-08-17 ·Isara Cholaseuk, Penelope Llibre, Alexa Kyriacou, Audrey Wang, Akua K. Dickson +3 more
top venue similarity 0.65
Abstract · 8 pages, 8 figures

Designing large soft robots capable of generating high forces for physical human-robot interaction remains a significant challenge in soft robotics. Prior work in large soft robots has focused on proof-of-concept prototypes, and no systematic framework exists for determining the suitability of a design paradigm for a desired task. This manuscript introduces a method for optimizing the geometry of a soft robot limb, maximizing its blocking force subject to an anti-bucking constraint under its own gravitational loading. We demonstrate that an explicit solution exists to the proposed optimization problem under certain assumptions. Experiments with three geometries of a large, soft, pneumatically-actuated manipulator demonstrate that the method correctly predicts which designs meet constraints and which produces the largest end-effector forces. This method, with its closed-form solution, can allow designers to determine a-priori if an intended class of soft manipulators is an appropriate choice for physical interaction at large size scales.

0.54

Full-Order Safety for Nonlinear Reduced-Order MPC

cs.RO eess.SYmath.OC ·2026-10-13 ·Luis Pabon, Johannes Köhler, Revant Kasichainula, Marco Pavone
code/data similarity 0.65
Abstract · 8 pages, 4 figures

Reduced-order models (ROMs) make model predictive control (MPC) of high-dimensional nonlinear systems tractable, but the resulting modeling error can lead to constraint violations on the real system. We introduce CoRE-MPC, a robust MPC formulation that plans with a nonlinear ROM and guarantees recursive feasibility and constraint satisfaction for the full-order system. It can be applied with a broad class of nonlinear model reduction techniques and the resulting MPC does not require evaluating the full-order model online, thus ensuring computational efficiency. The key insight is in how the ROM affects the dynamics of the prediction error. We account for this with two error radii that are propagated alongside the ROM and provide a guaranteed bound on the prediction error. The approach is validated in simulation on an 80-state oscillator chain, a Burgers equation, and a 9,768-state finite-element soft robot, where a two-state ROM with data-driven bounds keeps all 1,628 nodes clear of a wall at a median solve time below 1 ms for a 20 ms control period. Across these examples, CoRE-MPC is 13 to 61 times faster than full-order robust MPC at only 27 to 35% higher closed-loop cost, whereas existing certified schemes are either infeasible or at least twice as conservative. Code: [released upon publication].

0.41

Data-Driven Precision Control of Soft Helicoid Robots

cs.RO cs.LGmath.DS ·2026-11-09 ·Roshan S. Kaundinya, Mark Leone, Roberto Sabella, Hugo Buurmeijer, Luis Pabon +3 more
similarity 0.64
Abstract · Submitted to npj Robotics. 44 pages, supplementary information included

A purely data-driven method grounded in the theory of adiabatic spectral submanifolds (aSSMs) was recently used to model and control nonlinear soft robotic simulators. Here, we extend the methodology to learn aSSM-reduced models from data collected from hardware soft robotic platforms. Specifically, we learn a five dimensional (5D) aSSM-reduced nonlinear ordinary differential equation (ODE) that accurately models the dynamics of a soft-helicoid trunk robot. We then use this ODE in a model predictive control scheme to demonstrate real-time precision control across various challenging closed-loop trajectory-tracking tasks, ranging from 2D to 3D trajectories with static and dynamic constraints. We find that our methodology enhances accuracy and precision across all control tasks compared to available data-driven linear methods and model-free reinforcement learning. While we focus here on a soft-helicoid trunk robot, our methodology relies solely on hardware data and is therefore applicable to a broader class of soft robotic systems.

0.26

Task-Space Motion-Force Nonlinear Model Predictive Control for Precise and Compliant Control under Uncertainties

cs.RO ·2026-10-12 ·Quang-Nam Nguyen, Ludovic Righetti
hot direction similarity 0.64
Abstract

In Nonlinear Model Predictive Control (NMPC), the control law is implicitly determined by the solution of an Optimal Control Problem (OCP). Consequently, OCP design is often tailored to specific platforms and tasks, demanding extensive expert knowledge and tuning effort. To address this, we propose a unified NMPC framework that directly plans and controls the robot joints subject to task-space motion and force requirements and is capable of seamlessly generalizing across multiple robotic platforms and diverse tasks. Furthermore, optimization-based methods often treat interactions as rigid contacts, making the torque solution sensitive to the modeling errors of the robot dynamics and the environment. We study the intrinsic task-space impedance of our proposed controller, its partial contraction for differential stability and differential passivity under unmodeled interactions. As a result, our framework enables closing the force-feedback loop in the high-level planning layer to achieve precise motion-force tracking performance, addressing the long-standing challenge of force-feedback NMPC. Finally, we validate our framework on physical hardware, demonstrating hybrid motion-force control on a redundant manipulator and compliant locomotion on a quadruped, while preserving core NMPC advantages such as hard constraint satisfaction, optimal redundancy exploitation, and real-time planning under unforeseen interactions.

0.42

Real-Time Shape Control of Multi-Segment Soft Robotic Arms Using Koopman Operators with Global and Local Observables

cs.RO eess.SY ·2026-09-02 ·Jiahe Wang, Eron Ristich, Sultan Haidar Ali, Eric weissman, Lei Zhang +3 more
similarity 0.63
Abstract · 18 pages, 14 figures, submitted to TRO

Multi-segment soft robotic arms can continuously reconfigure their body shapes for safe interaction, but tip control alone is insufficient for constrained-space tasks. Therefore, shape control is a more important task for multi-segment soft arms than tip control, but remains challenging due to the high dimensionality and nonlinear dynamics of continuum deformation. In existing work, shape control accuracy is defined by the error in the global frame (global shape error). For multi-segment soft arms, using only global shape error as the control objective is insufficient, as segment coupling, gravity-induced loading, and inertial effects become more significant. This difficulty increases with the number of segments. In this paper, we present a Koopman-based model predictive control framework that combines global and local observables, enabling real-time shape control on multi-segment soft robotic arms. The framework is evaluated through numerical and physical experiments. Numerical experiments demonstrate the scalability of the proposed controller by achieving shape control on robots with up to 10 independently actuated segments. The physical experiments demonstrate that the controller is capable of (1) real-time shape control of 3- and 5-segment robotic arms with tip speeds up to 0.6 m/s, (2) robust tracking without retraining, including distal payloads up to 400~g and recovery from a 7~N lateral disturbance, and (3) the potential for future inspection applications through a confined-space demonstration. These results demonstrate that the proposed framework enables dynamic, scalable, and accurate real-time shape control on multi-segment soft robotic arms.

0.35

Learning-Based Pressure Predictive Control of a Vertebraic Soft Robotic Tail

cs.RO ·2026-09-24 ·Wenjian Yang, Nan Huang, Yukang Nie, Fang Chen, Wanchao Chi +2 more
similarity 0.62
Abstract

Soft robots have attracted much attention for their safe human-robot interaction and flexibility, but the typical continuum structure and nonlinear material behavior make the kinematics modelling complex, especially in non-static motions. In this work, we proposed an LSTM-based pressure predictive control (PPC) for the motion control of a vertebraic soft robotic tail and the coordination with a quadruped robot. The PPC consists of an inverse kinematics (IK) model, a forward kinematics (FK) model and a pressure compensation (P-comp) model, and achieves non-static and quasi-static motion control of the tail. Compared with the IK-only model, the average RMSE of the PPC's simulation trajectories reduces by 69.8%, when executing target trajectories. In the coordinated motions of the soft tail quadruped, using a prediction data set to train the PPC enables next-moment action prediction and reduces computation time by 60.9%, which enhances the real-time response of the tail to match the quadruped torso's moving rate. The PPC provides a simple and effective method to model the soft tail for both non-static and quasi-static motion control, and grants the soft tail quadruped with the functionality of interacting with the environment.

0.25