CS Paper Radar

MAPLE-Sec: Mobility-Aware Partitioned Language-Model Engine for Roaming IoT Security

Yuhang Qiu, Ziwei Li, Jinfeng Xu, Jialiang Xie, Fangmin Ren, Shirong Guo, Jing Yang, Sunil Prajapat, Por Lip Yee

cs.NI ·submitted 2026-10-27 12:43 UTC · v1

Abstract

Mobile Internet-of-Things (IoT) endpoints such as connected vehicles, wearables, and drones continuously cross heterogeneous network domains, creating handover-driven attack surfaces that static, cloud-anchored detectors cannot follow. However, three obstacles block real-time detection on such roaming endpoints: detection state is lost at every inter-domain handover; transmitting raw telemetry to a fixed detector exhausts the uplink and the device battery; and full-depth language model inference cannot meet millisecond latency budgets on constrained hardware. To tackle these challenges, we propose MAPLE-Sec, a mobility-aware partitioning framework that splits a compact, security-tuned language model across a roaming device and its nearest edge node. First, a trajectory-conditioned partition scheduler recomputes the split point from predicted handover timing, residual battery, and uplink quality. Second, a token-budgeted early-exit mechanism emits a verdict at the shallowest layer that meets a confidence threshold. Finally, a learned activation-compression codec migrates the intermediate inference state across edge nodes during handover without retransmitting raw telemetry. We formalize the partition-and-migration decision as an on-device constrained optimization solved in sub-millisecond time. Extensive experiments across the CIC-IoT and Edge-IIoTset corpora under both IID and non-IID roaming conditions demonstrate that MAPLE-Sec sustains detection across mobility events, improving the converged F1-score by up to 9.3\% relative to Cloud-only and by 2.9 percentage points over the strongest edge-collaborative baseline (EdgeShard), while reducing end-to-end latency by up to 2.5$\times$. Ablation confirms that the activation-compression codec reduces migration energy by 2.4$\times$ versus the raw-activation migration variant.

Comment
15 pages, 12 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Hybrid Hierarchical Runtime Verification for Edge-IoT Security: Combining MonPoly and RTLola

cs.CR cs.DCcs.LO ·2026-10-07 ·Nikolaos Kekatos, Marinelio Chintri, Panagiotis Katsaros, Alexios Lekidis, Tom Nianios +3 more
publishedhighly cited similarity 0.62
Abstract · 19 pages, 2 figures, 7 tables. Published in Availability, Reliability and Security (ARES 2026), EU Projects Symposium Workshops, Springer LN…

Security monitoring of edge-IoT fleets faces three structural challenges. (i) A per-node monitor is cheap but cannot see attacks that coordinate across devices. (ii) A cloud monitor sees the full fleet but pays for that view in bandwidth. (iii) Even at the cloud, a monitor built on a single RV engine can be fooled by an attacker who compromises a device, raises one malicious request, and then goes silent: once the events stop, an event-triggered monitor has nothing left to evaluate. We propose a three-layer hierarchical runtime-verification framework that addresses all three. The edge layer classifies events as they happen, the gateway layer aggregates short windows of per-device behaviour, and the cloud layer runs two complementary RV engines. MonPoly handles first-order temporal correlation over the merged alert stream: coordinated overflow (which genuinely quantifies across devices) plus per-device multi-vector APT, escalation, and persistent-campaign patterns. RTLola handles a time-triggered silent-node property that an event-triggered engine cannot detect within a bounded delay under fleet silence. We evaluate the framework on a 15-actor Docker testbed covering eight attack profiles plus a silent-bypass scenario. In the controlled labelled testbed, every device-attributable incident the framework raises names an attacker-labelled device, and the RTLola tier catches silent-bypass attempts the event-triggered tier misses. Per-event monitoring stays in the microsecond range at the edge and gateway, with low end-to-end alert-to-incident latency at the cloud.

0.58

Threat Aware Task Offloading and Caching for Secure UAV Assisted Vehicular Consumer Electronics

cs.NI ·2026-08-18 ·Xiaoteng Yang, Sunil Prajapat, Zheng Lin
top venue similarity 0.60
Abstract · 12 pages, 8 figures

Vehicular consumer electronics increasingly support computation-intensive and latency-sensitive services, imposing stringent efficiency, reliability, and security requirements on vehicular edge computing (VEC) systems. In dynamic vehicular environments, inference-based information leakage and anomalous communication behaviors further threaten system performance and data privacy. To address these challenges, this paper proposes a UAV-assisted cooperative VEC architecture that integrates threat-aware task offloading with intelligent spatiotemporal caching across roadside units (RSUs) and UAV edge nodes. A security-aware uplink transmission model is developed to capture potential information leakage risks and abnormal communication patterns, enabling adaptive offloading decisions. We formulate a joint optimization problem to minimize end-to-end task execution delay while improving cache utilization under limited computing and storage resources. To efficiently solve this problem, a Threat-Aware Joint Optimization (TAGO) framework is designed by combining proximal policy optimization for adaptive task offloading and a gradient-based caching update derived from the Frank-Wolfe algorithm to capture spatiotemporal service popularity. Simulation results demonstrate that the proposed approach significantly reduces task delay and improves cache efficiency compared with several baseline strategies, showing its effectiveness for secure and efficient UAV-assisted vehicular consumer electronics systems.

0.46

Where Should Models Run? A Collaborative Inference Framework for Embodied Intelligence in 6G

cs.LG cs.AI ·2026-11-07 ·Wanlu Sun, Zhenhui Yuan, Xiang Ji, Yi Han, Qing Li +1 more
similarity 0.60
Abstract · Version 1 - Under Review

Embodied intelligence systems rely on fast and reliable inference to enable real-time perception, reasoning, and control. Recent advances in large-scale artificial intelligence (AI) models, including Large Language Models (LLMs) and Vision-Language-Action (VLA) models, have significantly enhanced the capabilities of embodied agents in complex environments. However, deploying these models remains challenging due to the limited computational resources and energy budgets of robotic platforms. A fundamental question is where inference should be executed. Collaborative inference, which partitions models across end devices, edge servers, and the cloud, has emerged as a promising solution. Yet determining the optimal partitioning point remains an open problem, as it depends on wireless network conditions, model structure, and privacy requirements. This article reviews the state of the art in collaborative inference for embodied intelligence and proposes an edge-centric framework in which the edge coordinates model partitioning and execution. Through both simulation and real-world experiments over WiFi and 5G networks, we demonstrate that the optimal partitioning strategy varies with network conditions and model structure. We further identify latency-minimizing partition points for ResNet-101, Qwen2.5-VL-7B, and OpenVLA-7B in collaborative inference between NVIDIA Jetson Nano or AGX Xavier devices and an AGX Thor edge server under varying wireless conditions. Finally, we discuss the future directions for collaborative inference in 6G-empowered embodied intelligence systems.

0.15

CrossLink: Breaking Location Privacy by Linking Device Identifiers Across Protocols

cs.CR ·2026-09-09 ·Aneet Kumar Dutta, Mihirraj Dixit, Kevin Gni, Wouter Lueks, Mridula Singh
similarity 0.59
Abstract

Smartphones simultaneously transmit temporary identifiers over LTE, WiFi, and BLE. Existing privacy defenses analyze identifier randomization per protocol, implicitly assuming that these protections compose across protocols. We show that they do not: Even when each protocol leaks only temporary identifiers and the adversary is fully passive, unsynchronized identifier rotations allow cross-protocol stitching of device traces. We present CrossLink, an uncertainty-aware tracing algorithm that links identifiers across time, space, and protocols under noisy localization and mobility. We evaluate CrossLink using controlled lab experiments with commodity devices and large-scale mobility simulation. Under large-scale mobility simulation, CrossLink reconstructs full traces for 83% of users, versus 22% for the best single-protocol baseline, showing that location privacy must be analyzed jointly across protocols. We further show that CrossLink remains effective under partial coverage: strategically placed sniffers near LTE handover regions, mobile sniffers, and limited high-coverage subregions retain sufficient cross-protocol evidence to bridge observation gaps, achieving substantially higher linkability than random deployments.

0.33

Resource-Aware Model Selection for Scalable Indoor Localization on HPC Platforms

cs.DC ·2026-09-24 ·Fukuharu Tanaka, Hamada Rizk, Moustafa Youssef, Hirozumi Yamaguchi
published similarity 0.59
Abstract · 20 pages, 15 figures. Accepted for publication in 38th IEEE/SBC International Symposium on Computer Architecture and High Performance Comput…

Large-scale indoor localization is increasingly needed in campuses, smart buildings, factories, and digital-twin infrastructures, where wireless conditions, access-point deployments, and spatial layouts evolve over time. Such systems must be accurate, extendable, and maintainable, allowing new buildings, floors, rooms, and service areas to be added without retraining a monolithic model. Modular learning-based localization supports this goal by assigning independent models to buildings, floors, and fine-grained spatial regions. However, this extendability introduces a high-performance inference challenge: each query may require selecting and executing among hundreds or thousands of local models, making exhaustive inference costly in computation, accelerator memory residency, model loading, and scheduling. This paper presents a resource-aware modular inference framework for WiFi fingerprint-based indoor localization on high-performance and distributed computing platforms. The framework organizes local autoencoder models into a building-floor-spot hierarchy and formulates localization as model selection over a large pretrained model ensemble. To reduce inference cost under resource constraints, we introduce two lightweight execution-pruning strategies: Hierarchical Candidate Pruning, which performs coarse-to-fine model selection, and Trajectory-Aware Pruning, which uses temporal locality in user movement to restrict inference to spatially plausible neighboring models. Experiments on a real-world dataset demonstrate that the proposed framework delivers scalable inference without sacrificing localization quality. Compared with exhaustive evaluation over 735 spot models, Hierarchical Candidate Pruning requires only 67 model evaluations, while Trajectory-Aware Pruning reduces this number to just 10, cutting model executions by 98.6%.

0.28

Hierarchical Security Monitoring for Edge-IoT: A Formal Methods Approach

cs.CR cs.LOcs.SE ·2026-10-07 ·Nikolaos Kekatos, Marinelio Chintri, Panagiotis Katsaros, Alexios Lekidis, Tom Nianios +2 more
publishedhighly cited similarity 0.59
Abstract · 7 pages, 1 figure, 2 tables. Accepted at the 2026 IEEE International Conference on Cyber Security and Resilience (IEEE CSR 2026)

Cyber resiliency in edge-IoT deployments is fundamentally an economic problem: detection must keep critical processes operating under attack, but defender resources (compute, bandwidth, operator attention) are bounded. Centralised cloud monitoring offers expressive cross-device detection at prohibitive bandwidth cost; purely edge-local monitoring is cheap but blind to coordinated multi-device attacks where the asymmetric balance favours the attacker. We propose a lightweight hierarchical security-monitoring framework, built on formal runtime-verification methods, that occupies the practical middle ground at quantified cost. Each edge device runs a lightweight TeSSLa stream specification (size, payload validity, rate, and timestamp-drift predicates) that emits a four-valued verdict per aggregation window at sub-microsecond per-event cost; the gateway runs a parametric first-order MonPoly monitor over the per-device verdict streams at microsecond-scale per-verdict cost. The edge-to-gateway uplink carries roughly one Boolean per aggregation window per node, orders of magnitude smaller than the raw packet stream. The gateway tier detects coordinated attack patterns that no single-node monitor can see, shifting the asymmetric cost balance toward the defender. Every alert carries a witness set naming the device, the monitor tier, and the predicate that fired, providing an auditable record of the decision. We evaluate the framework on a container-host testbed spanning nominal and attacker nodes across four attack classes (buffer overflow, time spoofing, denial-of-service, and mixed advanced-persistent-threat patterns), and describe the edge- and gateway-tier specifications together with the cost-versus-coverage trade-off as monitor levels are added.

0.56

DySCo: Dynamic Sharding for Collaborative Edge-Cloud LLM Inference with Depth-Synchronized Batching

cs.DC cs.AIcs.LGeess.SY ·2026-10-06 ·Jingpo Xu, Paul Joe Maliakel, Ivona Brandic, Shashikant Ilager
code/data similarity 0.59
Abstract · article under submission

Pervasive intelligent applications are increasingly deployed on mobile and Internet of Things (IoT) edge devices. Consequently, Large Language Models (LLMs) are increasingly used to support these applications. Yet, due to their high resource demands, LLMs are mostly deployed in the cloud. Layer-wise edge-cloud inference lets resource-constrained edge devices contribute computation to LLMs they cannot host in full. However, heterogeneous split points introduce two coupled inefficiencies. First, edge execution and communication create idle gaps between cloud invocations. Second, requests arriving at different model depths cannot be conventionally batched. We present DySCo, a collaborative runtime that keeps KV caches local and introduces dyForward, a model-aware layer-range executor that runs configurable contiguous layer ranges from resident model shards without reloading weights. For multi-edge serving settings, we introduce depth-synchronized batching (DSB), which advances heterogeneous requests to the deepest cut and batches their common suffix. Experiments across heterogeneous devices, two model families, and local and wide-area links show that idle gaps increase the latency of subsequent GPU forward calls even when waiting time is excluded, adding up to 25 ms of additional cloud-side suffix latency per decoding step in our measurements. At an average concurrency of eight, DSB improves throughput by 275% over FIFO, 48% over exact-match batching, and 79% over round-robin interleaving while reducing mean per-session latency. Together, these results show that requests with different edge-cloud splits can reuse resident cloud weights and share batched suffix computation. The artifact repository for this work is publicly available at: https://github.com/Large-scale-Sustainable-Computing-LSC/dysco-artifact

0.26

RepTC: Representation-Aware Optimization for Efficient Traffic Classification on Edge IoT Devices

cs.NI cs.LG ·2026-10-03 ·Adel Chehade, Edoardo Ragusa, Paolo Gastaldo, Rodolfo Zunino
similarity 0.58
Abstract · 17 pages, 10 figures, 13 tables

Traffic classification (TC) is crucial to secure Internet of Things (IoT) networks, whose edge nodes often operate under privacy, bandwidth, and energy constraints. Yet, encrypted payloads and limited computing power make accurate, real-time TC a challenging task. Existing learning-based TC approaches often fix the input configuration a priori, even though it directly influences both predictive performance and computational cost. This paper presents RepTC, a representation-aware hardware-constrained strategy that addresses session-level TC through joint model and input optimization. The method co-optimizes network architecture, session length, and header preprocessing; this enables joint control of model complexity, input scale, and data representation within a unified resource-constrained design space. The proposed approach enforces microcontroller-class constraints on memory, model size, and computation, and yields compact models deployable on low-power edge devices. A gateway monitors traffic by aggregating sessions and either performs inference locally or offloads to a low-power edge node. Both scenarios are validated on heterogeneous embedded hardware, including a Raspberry Pi 3B+, STM32 Nucleo-F401RE, and XIAO ESP32-C3, spanning Cortex-A, Cortex-M, and RISC-V processor architectures; measured inference latency ranges from 0.63 to 18.59 ms, with MCU-side inference energy between 0.50 and 1.41 mJ per session. RepTC yields configurations that achieve high accuracy on a variety of established benchmarks: 96.21% on ISCX VPN-nonVPN, 99.62% on USTC-TFC2016, and 99.97% on Edge-IIoTset; at the same time, model size and computational requirements were reduced by up to three orders of magnitude compared with state-of-the-art methods. The results show that representation-aware optimization can improve efficiency while preserving competitive classification performance.

0.16