CS Paper Radar

survivalGPU: Scalable Survival Analysis for R and Python

Antoine Poirot-Bourdain, Alexis Van Straaten, Emmanuel Bacry, Anne-Sophie Jannot, Jean Feydy

cs.MS ·submitted 2026-10-28 08:49 UTC · v1
benchmark

Abstract

This paper introduces survivalGPU, a high-performance Python and R package designed to accelerate survival analysis computations using graphics processing units (GPUs). While the Cox proportional hazards model remains a cornerstone of survival analysis, it can impose substantial computational burdens when applied to large longitudinal data sets. To address this limitation, survivalGPU implements Cox proportional hazards models and weighted cumulative exposure (WCE) models in Python, using PyTorch and KeOps for efficient back-end computation, with interfaces in both Python and R. Numerical validation shows that survivalGPU reproduces the results of reference implementations within the tolerances expected for the selected floating-point precision, with relative errors below 10 -2 in float32 and below 10 -5 in float64. Benchmark experiments demonstrate substantial speedups. For Cox models, coxphGPU() was 5.6x faster than coxph() from the survival package on 1,000,000 patients, and 14.0x faster based on runtimes extrapolated to 1,000 bootstrap replicates on 100,000 patients. Gains were larger for WCE models: wceGPU() was 920.7x faster than WCE() from the WCE package on 100,000 patients, and 1,321.4x faster based on runtimes extrapolated to 1,000 bootstrap replicates. These results show that survivalGPU makes flexible time-dependent survival modeling and bootstrap-based estimation of confidence intervals feasible for large-scale pharmacoepidemiological applications.

Closest papers

Nearest neighbours by meaning across the whole index.

SurvICL: a Foundation Model for in-context Survival Analysis

cs.LG stat.ML ·2026-10-15 ·Julie Alberge, Linus Bleistein, Judith Abécassis, Marine Le Morvan, Gaël Varoquaux +1 more
benchmark similarity 0.56
Abstract

Tabular foundation models (TFMs) now outperform gradient-boosted trees in classification and regression. Yet in survival analysis, which predicts when an event occurs from censored data, often on small clinical cohorts, we find that no existing TFM beats the half-century-old Cox model. We address this issue by introducing SurvICL, a TFM that predicts survival curves in-context. SurvICL is pretrained on purely synthetic datasets generated from a novel flexible proportional-odds prior that outperforms other prior types in our ablation study. Unlike most other survival models, SurvICL is trained with a plain quantile regression loss, which is possible because its synthetic pre-training data generator can provide uncensored event times. Additionally, we introduce the largest survival benchmark to date spanning 103 datasets. On the 63 datasets held out from all design decisions, SurvICL outperforms 20 tree-based, deep, and foundation-model baselines without any tuning: it wins 82.9\% of pairwise comparisons in integrated Brier score, against 71.3\% for the runner-up, the Cox model, and is the first model to rank above Cox on small datasets.

0.17

What Bloats Your Floats? Right-Sizing Numerical Precision for Scientific Computing

cs.DC ·2026-10-06 ·Pratyai Mazumder, Alexandru Calotoiu, Marcin Copik, Yakup Koray Budanaz, Shriram Chandran +1 more
published similarity 0.54
Abstract · Accepted at SC '26: The International Conference for High Performance Computing, Networking, Storage, and Analysis, November 15-20, 2026, Ch…

While FP64 (binary64) remains the standard representation of real numbers in scientific computing, hardware trends increasingly favor low-precision formats optimized for AI workloads. This shift prioritizes throughput and energy efficiency over full-precision capabilities. We challenge the necessity of high-precision arithmetic in PDE-governed simulations, where spatial and temporal discretization errors introduce a physical noise floor that masks the lower-order bits of the FP64 format, rendering them irrelevant. We propose a criterion based on the Signal-to-Noise Ratio (SNR) with respect to spatial and temporal refinements to evaluate the impact of safe precision reduction on scientific computations. Finally, we present an automated dataflow-centric workflow for targeted lowering within mixed-precision subgraphs in complex scientific applications. Large-scale evaluations of weather and climate applications show that strategic precision reduction on GPUs achieves up to 1.8x speedup without compromising physical fidelity.

0.36

Validation-Centric AI-Assisted GPU Porting of a 250,000+ Line Legacy Weather Simulation Code

cs.DC ·2026-08-13 ·Tetsuya Hoshino, Masaya Kato, Kazuhisa Tsuboki, Daichi Mukunoki, Takahiro Katagiri +1 more
similarity 0.53
Abstract · 11 pages, 1 figure, 3 tables. Submitted to AgenticAI4HPC 2026

Recent advances in large language models have made CLI-based AI agents a practical tool for accelerating GPU porting of large legacy scientific applications. Such applications, however, are not merely old code bases; they are scientific assets whose credibility has been accumulated through long-term development, comparison with observations, and use in domain studies. GPU porting must therefore preserve this scientific validity while adapting the implementation to GPU-centric HPC systems. This paper presents a validation-centric AI-assisted GPU porting workflow through a case study of CReSS, a legacy Fortran weather simulation code with more than 250,000 lines. The workflow uses an AI agent to extract OpenMP regions, generate dump-based kernel benchmarks from physically meaningful simulation states, apply OpenACC transformations, and validate results through element-wise comparison with dumped reference data and application-level validation. Using a real typhoon simulation, the workflow produced numerically validated GPU implementations for 162 target kernels and achieved a 5.1x application-level speedup within practical wall-clock development cost. In particular, it detected numerical discrepancies in five kernels caused by floating-point and intrinsic-function differences, including threshold-sensitive branch divergence and cancellation effects, enabling feedback to the application developers. The case study suggests that, for large legacy scientific applications requiring dump-based validation, practical AI-assisted GPU porting must manage session-spanning context, runtime-state reconstruction, and costly recovery from small static-analysis omissions. These findings demonstrate that AI-assisted GPU porting requires not only code generation, but validation-centric workflow design.

0.12

BlockMGARD: Accelerating Adaptive Scientific Data Reduction with Region-of-Interest Error Control on GPUs

cs.DC ·2026-08-31 ·Yanliang Li, Qian Gong, Qing Liu, Jaemoon Lee, Norbert Podhorszki +3 more
similarity 0.52
Abstract

The growing scale of scientific data makes lossy compression essential for reducing data volume under controllable error. Transformation-based compressors using multilevel decomposition, such as MGARD, achieve strong compression ratios but map poorly to GPU architectures. We propose BlockMGARD, an adaptive, Region-of-Interest (ROI)-supported GPU lossy compressor, with four contributions: (1) an In-cache Block decomposition leveraging GPU on-chip memory and constant lookup tables to accelerate decomposition; (2) a hybrid hierarchy combining In-cache Block and global decomposition to balance speed and compression ratio; (3) an end-to-end pipeline with fine-grained ROI error control for feature preservation; and (4) an evaluation against state-of-the-art methods on five real-world datasets. Compared to MGARD-X, BlockMGARD achieves up to 4.2x and 9.1x higher compression and decompression throughput, and up to 8.63x higher compression ratio than uniform-tolerance baselines under ROI-aware error control. Across four GPUs, BlockMGARD achieves near-ideal linear scaling and up to 1.58x I/O cost reduction over MGARD-X.

0.23

Democratizing Clinical Tumor Whole Genome Sequencing: 18-hour End-to-end Analysis via Trillion-parameter Large Language Models Locally Deployed on Consumer-grade Hardware

cs.LG q-bio.GN ·2026-09-14 ·Rui Xiao, Yili Xu
similarity 0.52
Abstract · 11 pages. Corresponding author: Yili Xu(22465225@qq.com)

Whole genome sequencing (WGS) is essential for precision oncology, yet its clinical adoption remains limited by prohibitive computational costs and multi-day turnaround times. This work presents a fully localized low-resource framework enabling stable deployment of a trillion-parameter biomedical LLM on a single consumer-grade RTX 4060 laptop with 32GB system memory and 8GB VRAM, as well as on routine clinical workstations in general hospitals, completing the entire tumor-paired WGS workflow from raw FASTQ input to clinical-grade full-variation-spectrum report output. Under standard 30X depth configurations, our implementation finishes a single tumor-paired WGS analysis within 18 hours, achieving 99.62% F1 score for somatic variant detection with over 99.9% concordance to the industrial-standard A100 cluster pipeline, fully meeting clinical oncology accuracy requirements. Quantitative profiling shows adaptive heterogeneous memory scheduling accounts for 71% of total execution time, while model optimization introduces less than 9% of total detection error. This work is the first engineering implementation of trillion-parameter biomedical LLM-driven clinical-grade genomic analysis on consumer-grade hardware, breaking the industry paradigm that trillion-scale genomic LLMs require hundred-thousand-dollar GPU clusters and multi-day turnaround, establishing a low-resource pathway for global primary medical institutions to adopt whole-genome precision oncology at zero additional cost.

0.12

Flash-Radiomics: A Scalable Hybrid CPU-CUDA Engine for Standardized Scalar Radiomics and Accelerated Spatial Mapping

cs.MS q-bio.OTeess.IVphysics.med-ph ·2026-09-15 ·Shanli Ding, Yiyi Hu, Ziyu Fu, Chia-Hsin Lin, Ruihan Luo +3 more
similarity 0.52
Abstract · 20 pages, 5 figures

Background and Objectives: Spatial mapping retains the spatial distribution of radiomic features, but computational cost and fragmented software limit its use. We developed Flash-Radiomics with scalar extraction and spatial mapping, a central processing unit (CPU) backend, a hybrid Compute Unified Device Architecture (CUDA) backend, consistent feature names, and Hierarchical Data Format version 5 (HDF5) storage. Methods: We evaluated Image Biomarker Standardisation Initiative (IBSI) compliance, CPU-CUDA concordance, and end-to-end processing time. Compliance testing included 825 chapter 1 (IBSI-1) tests covering 165 high-consensus features and 323 chapter 2 (IBSI-2) tests with numerical references. Concordance testing included 1,148 scalar pairs and 93 spatial-map pairs. End-to-end processing time was measured five times per input volume of interest (VOI) size. Comparisons included the Medical Image Radiomics Processor (MIRP) and PyRadiomics for 102 shared scalar features and PyRadiomics for 93 shared spatial maps. Results: Both backends passed all 1,148 IBSI tests, and all paired results were concordant. At the largest scalar input, CPU required 76.343 s and hybrid CUDA 81.915 s; CPU was 4.7 times faster than MIRP and 190.7 times faster than PyRadiomics. At the largest spatial input completed by both backends, hybrid CUDA reduced processing time by 68.6% relative to CPU (79.280 versus 252.791 s). At PyRadiomics' largest completed spatial input, hybrid CUDA was 84.9 times faster. Conclusions: Flash-Radiomics unified standardized scalar extraction, spatial mapping, concordant CPU-CUDA results, and HDF5 storage. CPU processing time was similar or shorter for scalar extraction, whereas hybrid CUDA was faster for spatial mapping under the tested conditions.

0.31

Reference Manual of MEDiml

cs.SE physics.med-ph ·2026-10-21 ·Mahdi Ait Lhaj Loutfi, Simon Provost, Élodie Gillard, Moustafa Amine Bezzahi, Alexander Chum +11 more
code/data similarity 0.52
Abstract · 39 pages, 18 figures, 2 tables. Software, documentation, tutorials, and all software resources are available at https://www.mediml.app

Radiomics is the high-throughput extraction of quantitative features (e.g., tumor shape, intensity distributions, and texture) from medical images to characterize tissues and uncover disease patterns invisible to the human eye. These features can serve as candidate imaging biomarkers for cancer diagnosis, prognosis, and classification. However, extracting thousands of features makes it difficult to identify the most informative ones for a given clinical task, while implementing an end-to-end workflow can require programming expertise that limits accessibility for clinical researchers. Hence, we propose MEDiml, an open-source, standards-compliant radiomics platform connecting feature extraction, predictive modeling, and interpretation through complementary graphical and programmatic interfaces. MEDiml combines a Python package (MEDiml-pkg) with a graphical desktop application (MEDiml-app) that enables researchers to conduct experiments without writing code. Both interfaces use the same computational implementation, and code generation exports graphically configured workflows as executable Python code, facilitating reproducibility and collaboration between clinical researchers and computational scientists. A typical MEDiml workflow includes image preprocessing, radiomic feature extraction, feature set reduction, model training and evaluation, and interpretation using feature importance. Feature sets can be grouped into levels of radiomic complexity (morphological, intensity-based, textural, and filter-based) to evaluate whether more complex features provide additional predictive value. This reference manual documents the radiomics concepts, workflow, software components, architecture, and installation, compares MEDiml with existing tools, and demonstrates its complexity-driven workflow on five oncological imaging cohorts comprising 2,104 patients. Resources: www.mediml.app.

0.35

GPUPhysBench: Benchmarking Coding Agents for Correct and Efficient GPU Physics Simulation

cs.DC cs.AI ·2026-09-28 ·Yuchen Sun, Jinjin He, Sinan Wang, Bo Zhu
benchmark similarity 0.52
Abstract · 41 pages

Writing fast GPU code for physical simulation is difficult: implementations must preserve numerical accuracy while handling irregular data access, synchronization, and iterative solvers. We introduce GPUPhysBench, a benchmark of 50 tasks testing whether coding agents can meet these demands. Tasks cover fluids, deformable solids, and granular materials, from individual simulation operators to complete simulators. Agents write, compile, test, and optimize GPU code with access to a NVIDIA GPU under fixed time budgets. We report pass rates and runtime performance relative to expert-optimized reference implementations. In a single-attempt evaluation of six frontier model-harness pairs, the two strongest pass all 50 tasks, but even the fastest reaches at least 0.9 the reference speed on only 22% of them, and no submission is more than 5% faster than the reference. The largest gaps arise in collision detection, constraint solving, and iterative solvers. GPUPhysBench brings physical simulation workloads to coding-agent evaluation, testing both the ability to implement numerical methods correctly and the ability to make them run efficiently.

0.23