CS Paper Radar

Movable Beyond-Diagonal RIS for ISAC: Optimal Placement and Pareto Boundary

Chandan Kumar Sheemar, Sourabh Solanki, Symeon Chatzinotas

eess.SP ·submitted 2026-10-28 08:56 UTC · v1

Abstract

This letter investigates integrated sensing and communication using a movable beyond-diagonal reconfigurable intelligent surface (BD-RIS). Under a rank-one line-of-sight BS--RIS channel, we derive the exact communication--sensing Pareto boundary of a fully-connected BD-RIS in terms of user--target channel correlation. For line-of-sight RIS links, maximizing this correlation yields the optimal placement. We characterize the minimum track aperture that eliminates the illumination trade-off and show that a movable diagonal RIS then attains the same optimum. Below this threshold, a dynamic program offers certified placement accuracy. Numerical results examine hardware connectivity, angular mismatch, and Rician fading.

Closest papers

Nearest neighbours by meaning across the whole index.

Cooperative Target Localization in RIS-Enabled ISAC Systems

eess.SP ·2026-09-30 ·Rouhollah Amiri, Abdollah Ajorloo, Mohammad Mahdi Mojahedian, Ahmad Reza Hassanshahi, Fabiola Colone
similarity 0.63
Abstract

This paper develops a cooperative integrated sensing and communication (ISAC) framework in which a multi-antenna base station (BS) simultaneously localizes a target and serves multiple communication users, a subset of which is equipped with reconfigurable intelligent surfaces (RISs). The Fisher information matrix (FIM) for target positioning is derived, explicitly characterizing its dependence on the BS beamforming coefficients, RIS phase profiles, and bistatic sensing geometry. Under the stated scaling assumptions, coherent RIS phase alignment yields a Fisher-information gain that scales quadratically with the number of RIS elements, whereas independent random phases provide a linear gain in expectation. We formulate a sensing-centric joint active and passive beamforming problem that minimizes the position error bound (PEB) subject to per-user signal-to-interference-plus-noise ratio (SINR) and transmit-power constraints. The resulting non-convex problem is addressed through an iterative successive convex approximation (SCA) procedure that solves a sequence of convex subproblems. We further develop a target localization estimator that fuses one direct time-of-arrival (ToA) measurement, one angle-of-arrival (AoA) measurement, and multiple RIS-assisted indirect ToA measurements. Under small measurement errors and asymptotically efficient first-stage ToA/AoA estimation, the estimator covariance approaches the Cramér--Rao bound (CRB) to first order. Numerical results validate the analytical scaling laws and demonstrate the localization gains enabled by cooperative RIS-equipped users.

0.13

Intelligent Reflecting Surface for ISAC: From Beamforming to Joint Design With Surface Orientation

eess.SP ·2026-11-07 ·Qiaoyan Peng, Qingqing Wu, Guangji Chen, Yong Zeng, Sai Huang +3 more
similarity 0.62
Abstract

Rotatable semi-passive intelligent reflecting surfaces (SIRSs) provide an additional spatial degree of freedom (DoF) by proactively adjusting the orientation, while dedicated sensors directly receive target echoes. To exploit this DoF for integrated sensing and communication (ISAC), we investigate the joint optimization of SIRS rotation, base station (BS) transmit beamforming, and SIRS phase-shifts to minimize the Cramér-Rao bound (CRB) for target's spatial-frequency estimation subject to per-user communication signal-to-interference-plus-noise ratio (SINR) constraints. We first establish an orientation-dependent system model that characterizes the effective aperture gains, based on which the CRB is derived. To gain useful insights, closed-form expressions of the beamforming and rotation designs are derived in the sensing-only and communication-only cases. For the co-located user and target case, we further characterize the condition under which the sensing-oriented rotation design also satisfies the communication requirement. In the single-user single-target case with ideal unit aperture gains, we analyze the channel correlation and its impact on ISAC performance. For the general multi-user case, an effective method based on the genetic algorithm is developed. Numerical results demonstrate the superiorities of the rotatable SIRS over the fixed-orientation SIRS and show that jointly optimizing the SIRS orientation and beamforming can improve the effective aperture gains and the correlation between communication and sensing channels.

0.24

Secure Integrated Sensing and Communications with Movable Beyond-Diagonal RIS

eess.SP cs.IT ·2026-10-25 ·Chandan Kumar Sheemar, Symeon Chatzinotas
theory similarity 0.62
Abstract

In integrated sensing and communication (ISAC), when the sensed target is itself an eavesdropper, the illumination required for sensing coincides with the leakage that secrecy must suppress. This paper shows how a beyond-diagonal reconfigurable intelligent surface (BD-RIS) with movable elements decouples the two tasks in a monostatic setting, where the echo returns to the base station through the surface. We prove that a lossless reciprocal BD-RIS maps $K$ incident fields onto $K$ prescribed fields if and only if the two sets share the same Gram matrix and their bilinear Gram matrix is symmetric; unlike a diagonal RIS, it can thus steer a two-dimensional incident subspace onto any prescribed subspace. With a single stream, sensing incurs an unavoidable rate loss, whereas a closed-form zero-forcing design with a confidential and a Gaussian sensing stream nulls the data at the target and the sensing at the user, so that sensing costs only an SNR offset. Since all variables follow in closed form for any placement, the joint design reduces to a monotone search over the element positions, without alternating optimization. Simulations show that the dual-stream design loses only $1.1$ bit/s/Hz when the sensing requirement grows by $30$ dB, against $8.3$ bit/s/Hz for a single stream, while movement, interconnection, and the robust derivative-null design add up to $1.9$, $0.9$, and $2.6$ bit/s/Hz, respectively.

0.22

Robustness Guarantees for Optimal RIS Placement in Self-Localization Under Placement Errors

eess.SP ·2026-09-23 ·Mahdi Koloushani, Omid Rezaei, Seyed Mohammad Karbasi, Mohammad Mahdi Naghsh, Mohammad Mahdi Nayebi
theory similarity 0.60
Abstract

This paper studies the effect of Reconfigurable Intelligent Surface (RIS) placement errors on optimal RIS deployment for Time-of-Flight (ToF)-based self-localization. We consider a setup in which a source transmits a signal, receives the RIS-reflected echo, and estimates its own position from the corresponding ToF measurements. Under the conditions of moderate, i.i.d. Gaussian RIS position errors and i.i.d. Gaussian ToF noise, we demonstrate that the placement uncertainty manifests as a geometry-independent scaling factor in the Cramér-Rao Bound (CRB). Consequently, we prove that the optimal RIS placement remains unchanged by the presence of RIS position errors. This result is established for A-, D-, and E-optimality criteria. Simulation results verify the analysis and show that optimized RIS deployments retain their advantage even in the presence of placement uncertainty.

0.20

GPU-Accelerated Robust MA--RIS Pre-Optimization for Communication and Target Illumination

cs.IT cs.LG ·2026-10-15 ·Tran Le Dung, Ho Viet Duc Luong
published similarity 0.60
Abstract

Movable antennas (MAs) and reconfigurable intelligent surfaces (RISs) offer strong spatial control for integrated sensing and communication (ISAC), but repeatedly adapting MA positions and RIS phases to each channel realization can be impractical. This letter develops a GPU-accelerated robust pre-optimization framework that jointly selects slow-timescale MA geometry and RIS phases and returns a reusable Pareto set balancing expected worst-user rate and transmit-side worst-target illumination. The illumination objective measures directional transmitted power rather than complete echo-detection or parameter-estimation performance. The proposed Regime-Aware Multiobjective Pre-optimization (RAMP) preserves regime-specific Pareto populations, regulates cross-regime mating using Pareto-survival feedback, and constructs a worst-regime robust archive. Numerical results demonstrate competitive robust Pareto quality against the considered evolutionary baselines while avoiding online physical re-optimization.

0.58

Secure Near-Field ISAC with Pinching-Antenna Systems: Exploiting Constructive-Destructive Interference

eess.SP ·2026-09-26 ·Dimitrios Bozanis, Vasilis K. Papanikolaou, Sotiris A. Tegos, Panagiotis D. Diamantoulakis, Christos Masouros +1 more
similarity 0.59
Abstract

This paper investigates secure near-field integrated sensing and communication (ISAC) with pinching-antenna systems (PASS), where a base station serves legitimate users while localizing a target that may also eavesdrop on the transmitted data. We jointly design symbol-level precoding (SLP) and the transmit and receive pinching-antenna positions to minimize the Cartesian position error bound (PEB) averaged over the data symbols. Constructive interference ensures reliable reception at the legitimate users, whereas destructive interference drives the target's observation toward incorrect symbol regions without sacrificing the illumination required for sensing. We derive the PEB for unknown complex target reflectivity and establish an exact factorization into transmit-illumination and receive-geometry terms. This decomposition reveals the distinct sensing roles of the two apertures, enables separate receive-placement and joint transmit-placement/SLP optimization, and provides analytical insights into local position identifiability, the range-information limitations of compact arrays, sensing-oriented receive placement, and in-waveguide attenuation. Building on these results, we develop an efficient algorithm by combining geometry-informed receive initialization, one-dimensional transmit-position searches, and convex per-symbol precoding. Numerical results demonstrate sub-millimeter localization, erroneous symbol decisions at the target, an expanded feasible operating region, and substantial gains over fixed-placement PASS and fully digital extremely large-scale MIMO (XL-MIMO) benchmarks.

0.38

Cramér-Rao Bound Optimization for Joint Beamforming and Mode Selection in RDARS-Assisted ISAC Systems

eess.SP ·2026-10-01 ·Ahmad Reza Hassanshahi, Rouhollah Amiri, Fereidoon Behnia
benchmark similarity 0.59
Abstract

Integrated Sensing and Communication (ISAC) is a foundation of 6G networks, demanding architectures that simultaneously enhance sensing accuracy and communication reliability. This paper presents a Reconfigurable Distributed Antenna and Reflecting Surface (RDARS) aided ISAC framework, where an RDARS overcomes the limitations of conventional passive Reconfigurable Intelligent Surfaces (RIS) and Distributed Antenna Systems (DAS). By enabling each element to dynamically operate in either \textit{reflection} or \textit{connection} mode, RDARS synergistically harnesses reflection gain, distribution gain, and an additional mode-selection gain. We investigate the joint optimization of transmit beamforming at the base station and dynamic mode selection at the RDARS to minimize the sensing performance metric, namely the Cramér-Rao Bound (CRB) for target localization, while guaranteeing a minimum required Signal-to-Interference-plus-Noise Ratio (SINR) for multiple communication users. To solve the resulting non-convex and mixed-integer problem, we develop an efficient iterative algorithm based on the Alternating Optimization (AO) framework, effectively leveraging Majorization-Minimization (MM) and Penalty methods. Comprehensive simulations validate the proposed design, demonstrating that the dynamic RDARS configuration achieves a superior trade-off between the Position Error Bound (PEB) and communication SINR, significantly outperforming benchmark passive RIS and DAS systems.

0.10

Goal-Oriented Wave Computing for Direction-of-Arrival Estimation

eess.SP physics.app-ph ·2026-10-05 ·Mert Kalfa
benchmark similarity 0.57
Abstract · 9 pages, 2 figures, 4 tables

Programmable metasurfaces---arrays of elements whose electromagnetic response can be tuned electronically---can process signals as a wave propagates through or reflects off them, a paradigm known as wave-domain analog computing. The design strategy is typically indirect: the surface is fitted to a prescribed linear operator, such as a discrete Fourier transform, and the result is read from output power measurements. Using direction-of-arrival (DoA) estimation as a canonical benchmark, we study what this indirection costs across analog computing topologies, namely reflective reconfigurable intelligent surfaces (RIS), beyond-diagonal RIS (BD-RIS), and stacked intelligent metasurfaces (SIM). We first derive Cramér--Rao bounds for the complete physical estimation chain, including one that accounts for output detectors measuring only intensity. We then formulate a goal-oriented alternative where the surfaces are trained directly through the deployed readout, with no operator target. We observe that goal-oriented training lets sparsely connected or shallower surfaces reach the task performance of their more complex operator-fitted counterparts---despite nearly identical Fisher information---and that the advantage persists under coarsely quantized (1--3 bit) control. From 16 to 64 elements, the depth saving persists, while the connectivity a beyond-diagonal RIS needs grows with the aperture. Under tuner and per-layer loss, the goal-oriented designs keep their advantage.

0.25