CS Paper Radar

Energy-Efficient FPGA Implementation of an End-to-End Cosine-Domain CNN Using High-Level Synthesis

Sana Fatima, Ab Al-Hadi Ab Rahman, Ibrahim Yousef Alshareef, Farhad Khodadadi, Nuzhat Khan

cs.AR ·submitted 2026-10-29 03:21 UTC · v1

Abstract

The computational cost of conventional Convolutional Neural Networks (CNNs) limits their deployment in low-power devices for high-speed edge AI applications. This paper presents an end-to-end cosine-domain CNN (CD-CNN) architecture for energy-efficient FPGA inference using high-level synthesis (HLS). The proposed architecture performs intermediate feature extraction using real-valued DCT-domain representations, avoiding complex-valued arithmetic and intermediate inverse transforms between spectral layers. The design is implemented on a Xilinx Kintex UltraScale+ XCKU5P FPGA and evaluated against a fully spectral Fourier-domain CNN (FD-CNN) under consistent network and implementation constraints. Experiments on the MNIST and 94-class ASCII datasets show that the CD-CNN reduces normalized resource utilization and improves inference throughput on both datasets. Its energy efficiency reaches 112.91 frames/J for MNIST and 101.27 frames/J for ASCII, corresponding to improvements of $1.51\times$ and $2.76\times$, respectively, over the fully spectral FD-CNN architecture. Furthermore, compared to the previous GPU-based fully spectral CD-CNN implementation, the proposed end-to-end FPGA implementation improves energy efficiency by $12.96\times$. These results demonstrate the potential of real-valued spectral processing in the DCT domain for energy-efficient edge AI deployment.

Comment
9 pages, 11 figures. Currently under review at the VLSI Integration Journal

Closest papers

Nearest neighbours by meaning across the whole index.

Energy-Efficient Visual Inspection with FFT-Based CNNs and Adaptive Floating-Point Quantization

cs.AR ·2026-08-20 ·Lukas Krupp, Marco Groß, Michael Graichen, Kim Ulrich, Norbert Wehn
published similarity 0.71
Abstract · Accepted for presentation at the 23rd International SoC Design Conference (ISOCC 2026). Proceedings to be included in IEEE Xplore

This paper investigates reduced-precision floating-point arithmetic for FFT-based CNN inference on an industrial CPU-FPGA platform. We combine FFT-based convolution with adaptive post-training FP8 quantization and evaluate two FPGA-oriented optimization methods: progressive bias adjustment (PBA) within the FFT and layer-wise exponent-bias selection across the CNN. The methods are implemented in a LeNet-5 accelerator using serial radix-$2^2$ SDF FFT modules and evaluated on an industrial fault detection dataset. Results show that weight scaling outperforms PBA, while layer-wise bias optimization increases the accuracy from 80.33% to 84.13% without modifying the datapath width. Compared with CPU-only inference, the FPGA achieves approximately 2.5$\times$ higher energy efficiency.

0.44

FPGA Acceleration of CNN-BiLSTM for EEG-Based Sleep Staging Featuring FFT-Based Non-Unit Stride Fast Convolution

cs.AR ·2026-10-31 ·Aaron Zhou, Yaqian Xu, Chen Chen, James Yen, Weihang Zheng +5 more
publishedhot direction similarity 0.69
Abstract · 15 pages. Accepted for publication in IEEE Open Journal of Circuits and Systems

Deep learning (DL) models for real-time wearable sleep staging often rely on long-kernel temporal convolutions, a requirement that current accelerators struggle to support efficiently. To overcome this, we present an FPGA-based CNN-BiLSTM accelerator that incorporates several algorithm-hardware co-design techniques to enable efficient edge inference. Central to this design is an FFT-based non-unit stride fast convolution, which performs accumulation in the frequency domain to enable a single IFFT per block, reducing post-processing complexity to $O(N\log N)$. On the target long-kernel convolution layer, this yields a 20.5$\times$ reduction in arithmetic operations. Power-of-two quantization is applied across the pipeline, including FFT-based convolution and BiLSTM activations, with an average accuracy degradation of only 0.11% relative to the floating-point baseline across all subjects on the public MASS-SS3 dataset. Additional optimizations, including block convolution, depth-first execution, and hardware engine reuse minimize memory access and enhance resource utilization. The accelerator, implemented on a Xilinx Zynq-7000 FPGA, operates at 10 MHz and consumes 11 mW of dynamic power including data handling and configuration overhead from a microcontroller. The design achieves a DSP power efficiency of 0.91 GOPS/W/DSP using only 4 DSPs, demonstrating scalable and energy-efficient DL acceleration for sleep staging that can be extended to other wearable applications.

0.64

16-bit Precision of Convolutional Neural Networks on Microcontroller Units for 8-bit Costs

cs.LG ·2026-10-02 ·Rui Liu, Benjamin Paaßen
similarity 0.67
Abstract

To deploy deep neural networks on edge hardware, highly efficient inference schemes are necessary that retain high accuracy. This work presents W16A16, a high precision (16-bit), fast speed, low energy quantization method. On a widely applied microcontroller architecture Armv7E-M, our proposed approach achieves faster speed and lower energy consumption on layer- and model-level compared to alternative quantization schemes. We analyze the architecture of Armv7E-M, explain the underlying principles behind the performance advantages of 16-bit approaches, and evaluate the empiric quantization errors for regression and classification tasks, as well as empiric time- and energy consumption in MCU deployment. We observe ca.\ 10 times lower quantization errors compared to 8-bit quantization schemes while achieving similar or better inference times and energy consumption.

0.09

ShiftQAT: Quantization-Aware Training for the Numerical Contract of a Fixed-Function Edge CNN Accelerator

cs.LG ·2026-10-15 ·Oguzhan Buyuksolak, Osman Erman Okman, Mehmet Gorkem Ulkar
code/data similarity 0.66
Abstract

Fixed-function CNN accelerators make edge inference fast and energy-efficient, but they execute only networks that obey a precise numerical contract. On the MAX7800x family, this contract requires power-of-two, per-tensor, symmetric scales, 8-bit activations and biases, integer-only arithmetic, and one statically configured shift per layer. We present ShiftQAT, the quantization-aware training (QAT) flow we developed for this family, which produces networks satisfying the contract by construction. It is the default training path of ai8x-training, the family's open-source training toolchain. ShiftQAT resolves residual, concatenation, and weight-sharing dependencies so that activation scales propagate statically and each layer's requantization reduces to one offline-configured shift. It also trains weights and biases on a joint power-of-two grid that fits the 8-bit bias budget. Among the compared methods, only ShiftQAT satisfies all of the contract's scaling constraints, including signed 8-bit activation storage. Even so, on ImageNet it matches the W8A8 accuracy drop of less constrained QAT methods and stays within 2.9 percentage points of FP32 at W4A8. On MAX78002 silicon, ShiftQAT-trained MobileNetV2 and ResNet-18 classify ImageNet images in 14.6 and 8.4 ms at 5.1 and 2.8 mJ per inference.

0.20

ZTA-Q: an Open-source RISC-V Platform for Accurate Quantized CNN Inference

cs.AR ·2026-10-01 ·Yike Li, Ajay Kumar M, Vishnu PS, Dimitrios S. Nikolopoulos, Bo Ji +2 more
publishedcode/data similarity 0.66
Abstract · Accepted for publication at the 2026 IEEE 33rd International Conference on Electronics, Circuits and Systems (ICECS)

Low-precision inference is widely adopted in edge AI to reduce computational cost and memory footprint. However, existing open-source accelerator platforms provide limited end-to-end support for CNNs following the standard TensorFlow Lite integer inference scheme. This paper presents ZTA-Q, an open-source RISC-V-based platform that enables accurate deployment of TensorFlow Lite INT8 models. In addition to extending operator support, ZTA-Q provides a configurable post-processing datapath for studying how circuit-level approximations, including reduced multiplier precision, shared shift scaling, and simplified rounding, affect model accuracy. The proposed system is implemented on a Digilent Arty A7-100T FPGA and operates at 83.3 MHz. Evaluations on representative CNN models show that with LUT, register, and DSP overheads of 26.3%, 12.6%, and 150%, respectively, ZTA-Q limits the degradation in both top-1 and top-5 accuracy to within 0.25 percentage points.

0.35

ConvLUT: Rethinking Convolutional Architectures for Ultra-Low-Latency LUT-Based Inference

cs.LG ·2026-11-08 ·Marta Andronic, Olivia Weng, Danial Zuberi, Ryan Kastner, George A. Constantinides
similarity 0.65
Abstract

Lookup-table (LUT)-based neural networks (NNs) offer a compelling path to ultra-low-latency inference on FPGAs. However, existing LUT-based neural networks have largely been restricted to MLP-style topologies, leaving structured vision and audio tasks underexplored. We present ConvLUT, a family of fully unrolled LUT-mappable convolutional architectures targeting the MLPerf Tiny benchmarks. It is comprised of a standard convolutional model built around a hierarchical tree of LUTs and a depthwise separable model following the MobileNet design philosophy. These architectures are enabled by four key contributions: a unified LUT-based convolutional framework supporting standard, depthwise, and pointwise convolutions under explicit fan-in constraints; a LUT-tree that addresses the $k^2c$ receptive field dimensionality bottleneck; a channel-partitioned LUT pooling layer that replaces conventional spatial pooling; and a hardware-aware iterative pruning strategy for stable convergence at scale. Evaluated on CIFAR-10, Visual Wake Words, and Keyword Spotting, ConvLUT achieves competitive accuracy with fully unrolled inference latencies below $\sim 50$ ns. On CIFAR-10 it reaches at least a $8844\times$ latency reduction over non-logic-based prior implementations, and outperforms existing MLP-style LUT-based models on the same task by at least $20$ pp in test accuracy.

0.42

LocalTrain: Integer-Only Local Learning for Energy-Efficient CNN Training on Edge FPGAs

cs.AR cs.LG ·2026-10-12 ·Shiqi Ding, Xuanyu Liang, Xinyang Liu, Boyang Li, Zhiqiang Que +2 more
similarity 0.63
Abstract · 7 pages, 2 figures, 5 tables

Local learning reduces cross-layer training dependencies, but an efficient accelerator must still retain operands, accumulate gradients, and select quantization scales. We present an FPGA system that trains a CNN and its regional auxiliary classifiers using a shared integer matrix engine. Compact errors are expanded on chip, gradients are folded tile by tile, and historical scales permit direct output conversion. At 200 MHz, the KV260 prototype achieves 76.57% accuracy on CIFAR-10 and 91.85% on SVHN at approximately 4.20 W mean module power. Effective matrix throughput is 31.22 and 31.57 GMAC/s, respectively. Against the same integer method on Jetson Orin Nano, measured training energy is 40.4% and 42.1% lower, with $1.86\times$ and $1.82\times$ longer runtime; measurements use the respective platform power domains. Selected state checks and matching complete-run prediction counts support functional agreement with the software reference.

0.14

FAME: An FPGA-Based Platform for Approximate Multipliers Evaluation with Pattern-Guided DNN Retraining

cs.AR cs.LGcs.PF ·2026-09-15 ·Rappy Saha, Nima Amirafshar, Jude Haris, Nima Taherinejad, José Cano
publishedcode/data similarity 0.63
Abstract · Accepted at the 38th IEEE/SBC International Symposium on Computer Architecture and High Performance Computing (SBAC-PAD) 2026

Approximate multipliers can reduce hardware area and energy consumption in Deep Neural Network (DNN) inference; however, they introduce computational errors. Assessing the accuracy of numerous approximate multiplier designs across diverse DNN models and large-scale datasets remains challenging due to prohibitive evaluation times. This overhead primarily stems from the slow emulation of approximate multiplier behavior using look-up tables (LUTs) on CPU and GPU platforms. Moreover, the resulting accuracy degradation must be carefully quantified and, if necessary, mitigated (e.g., through retraining), further increasing the overall evaluation cost. To address these challenges, we propose FAME, an FPGA-based platform for evaluating approximate multipliers. The platform exploits the reconfigurable logic of Field-Programmable Gate Arrays (FPGAs) to implement approximate multipliers directly in hardware, eliminating the need for LUT-based emulation on CPU/GPU platforms and thereby enabling efficient DNN inference while significantly reducing evaluation time on large datasets. Furthermore, we introduce a pattern-guided DNN retraining technique to mitigate accuracy degradation induced by approximate multipliers. Specifically, retraining is guided by multiplier-specific patterns to effectively recover potential accuracy losses. We evaluate FAME using two DNN models, ResNet-18 and MobileNetV2, on the ImageNet dataset across 27 approximate multipliers. During inference, our approach achieves up to a 3.47x speedup in approximate multiplier evaluation compared to prior LUT-based emulation methods. Furthermore, the proposed retraining technique improves accuracy by up to 65.5% over existing retraining approaches for the evaluated multipliers. The code is publicly available at: https://github.com/gicLAB/FAME

0.28