CS Paper Radar

NORmal: Architecting 3D Ferroelectric NOR Flash as Main Memory -- From Co-Fabricated BEOL Arrays to 200B-Class Multi-Agent LLMs in a Smartphone

Zhuoran Li, Zhuohang Bian, Yibo Zhao, Xuxiao Yang, Youwei Zhuo

cs.AR ·submitted 2026-10-29 13:19 UTC · v3

Abstract

Smartphone agents increasingly work as teams, in which a large planner directs parallel workers across long sessions. Running such a team on the device requires 200B-class models and contexts that exceed phone DRAM many times over, yet existing tiers treat flash as storage: UFS starves per-token weight streaming, and mobile High-Bandwidth Flash (HBF) needs a redesigned SoC and cannot absorb continuous KV writes. We show that a non-volatile memory can join an unmodified LPDDR6 bus as a plain rank only if its access latency fits the DRAM timing window, a condition no NAND tier meets. We present NORmal, to our knowledge the first main-memory architecture for 3D ferroelectric NOR flash. We have fabricated and experimentally characterized back-end-of-line (BEOL) 3D FeNOR arrays that co-integrate dense 3-bit MLC and fast, high-endurance in-place-writable SLC with sub-7.5 ns sensing. NORmal turns these co-fabricated arrays into a byte-addressable, deterministic-timing load/store rank on an unmodified LPDDR6 interface through an under-array DRAM-emulation bridge, staggered bank reads with zero-cycle weight swizzling, and posted SLC writes. Across this rank and DRAM, NORmal places agent state by mutability and lifetime rather than by hotness, serving 200B-class models and persistent planner contexts in place while dynamically partitioning subchannels across agent phases. In serving-level simulation on production agent traces, NORmal is 8.9$\times$--28.0$\times$ faster than UFS offloading, within 0.4% of an unlimited-DRAM ideal, and 2.8$\times$--6.3$\times$ faster than HBF on sessions beyond 256K tokens, with 8.1$\times$--17.8$\times$ less memory energy per token.

Comment
13 pages

Closest papers

Nearest neighbours by meaning across the whole index.

Hot-Cold Tiering of HBM and High Bandwidth Flash for Agentic LLM Serving

cs.AR ·2026-09-22 ·Jongjin Baek, Won Ji, Seungjae Yoo, Joo-Young Kim
top venue similarity 0.69
Abstract

Large language model (LLM) serving is increasingly agentic, with multi-turn sessions that idle between actions yet must retain their full context. Limited GPU memory capacity forces inactive KV states to be evicted, so resuming a session incurs either costly recomputation or slow interconnect transfers. To address this, high bandwidth flash (HBF)-an on-package 3D-NAND memory offering orders-of-magnitude greater capacity than high bandwidth memory (HBM) at comparable read bandwidth-has emerged as a strong candidate. However, its high read energy and limited write endurance make it impractical to serve all KV traffic. Fortunately, our analysis shows that agentic KV states exhibit distinct access patterns: a small hot set is read for every decoding step, while a large cold pool is read only when a paused session resumes. Exploiting this, we place the hot set in HBM and the cold pool in HBF, forming a hot-cold KV hierarchy within the GPU memory tier. On agentic workloads with Qwen3-Coder-30B-A3B, our design delivers 14 ms time-between-tokens (TBT) and adds only $\approx$0.1 ms of resume latency on top of prefill, while hosting $24\times$ more concurrent sessions per GPU. By confining HBM to the hot set, our design also cuts read power by 7.6 kW per 8-GPU node relative to serving all KV from flash-establishing HBF as a cold-tier complement to HBM rather than its replacement.

0.37

Characterizing High Bandwidth Flash for LLM Serving

cs.LG cs.ARcs.DC ·2026-09-30 ·Zack Yu, Chloe Wong, Coleman Hooper, Minjae Lee, Wonjun Kang +5 more
similarity 0.64
Abstract

Large language model (LLM) serving requires substantial memory to store model weights and KV caches. As models grow larger and contexts become longer, memory capacity and bandwidth increasingly become bottlenecks for serving performance. Agentic workloads compound this pressure through repeated interactions over growing contexts, making it increasingly important to retain KV state for reuse. High-bandwidth flash (HBF) offers a way to expand accelerator memory capacity for large language model (LLM) serving, but its access costs and limited write endurance complicate its use. We evaluate HBF for high-throughput agentic serving across system design and scheduling choices to understand when additional capacity improves serving performance and energy efficiency. We introduce an HBM-HBF-host hierarchical storage system and buffered cache-aware scheduling, and use trace-driven simulations to analyze their effects on performance, energy consumption, and HBF write lifetime. Across the evaluated workloads, the fastest HBF-augmented systems reduce completion time by 36.1-87.7% relative to HBM-only systems. Modeled energy savings reach 59.1%, with benefits depending on the workload and weight placement. Buffered cache-aware scheduling extends estimated HBF write lifetime from 1.21 to 14.82 years in the evaluated configuration. These results demonstrate the importance of coordinating data placement and scheduling to improve serving efficiency while sustaining a practical HBF write lifetime.

0.26

NITRO: High-Performance 3D NAND Flash-Based In-Storage Computing with Enhanced Activation Dataflow

cs.AR ·2026-08-12 ·Sanghun Shin, Sangyeon Kim, Gisan Ji, Sungju Ryu
published similarity 0.64
Abstract · Extended manuscript of DATE 2026

In-storage computing (ISC) is considered a next-generation memory architecture for its ability to relieve the data bottleneck between the host and the memory. While the required resources of large language models (LLMs) have increased significantly in recent years, the memory density has not scaled accordingly. Recently, several works have studied NAND flash-based processing-in-memory (NAND-PIM) schemes to exploit the high density of the memory. However, they do not address the dataflow/buffer for the intermediate values, so a simple method is to deal with the values in the slow flash memory array. To overcome such a limitation, we propose a high-performance NAND flash-based ISC architecture with enhanced activation buffering. Instead of using the very slow flash memory array for the intermediate values, our architecture buffers the values in a fast DRAM subsystem. This approach effectively handles the high-latency penalties when activations are programmed into slower TLC NAND flash. We also introduce a distributed dataflow approach for the NAND-PIM array. This approach maximizes computational parallelism by employing efficient intra-plane data mapping. The results show that our proposed architecture achieves significant performance improvements, reducing the inference latency by up to 85% compared to the baseline.

0.17

HBFSim: A Simulator for Exploring HBF in Memory Hierarchies for LLMs

cs.AR cs.ET ·2026-10-16 ·Jinheng Li, Guosheng Wang, Hongchao Du, Shangyu Wu, Qiao Li +1 more
publishedcode/datahighly cited similarity 0.64
Abstract

High Bandwidth Flash (HBF) has recently emerged as a promising technology that provides terabyte-scale accelerator-local capacity at bandwidths approaching HBM, with a potential cost-per-bit advantage over HBM. However, its NAND foundation brings long latency, out-of-place updates, and finite write endurance directly into the accelerator memory hierarchy, making its effects on performance and lifetime difficult to predict. To study this emerging design space, we present HBFSim, an LLM-aware event-driven simulator for heterogeneous HBM+HBF memory systems that preserves application-level memory semantics while modeling flash-internal behavior. HBFSim models HBM, HBF with host-managed flash translation, and conventional capacity tiers in one simulation driven by a calibrated serving frontend. Using HBFSim, we study decoding of Llama-3.1-70B and Qwen3-235B-A22B under three workloads that differ in their input and output lengths. HBF serves data that does not fit in HBM 11.0--19.0$\times$ faster than host DRAM; HBM is better used to hold the running sequences' KV cache than as a cache for HBF; and at a published peak load of Llama-3.1-70B, HBF lasts 2.0 to 6.9 years, in proportion to the stacks that share the KV writes. The artifact is available at https://github.com/FlashLabAE/HBFSim and will track public HBF device data as it becomes available.

0.52

LaFlash: Capacity-Driven Acceleration for Coding Agent Workflows via QLC-HBF

cs.AR ·2026-11-17 ·Yuseon Choi, Eunjong Lee, Sanghyeon Park, Seongyon Hong, Sangjin Kim +1 more
similarity 0.63
Abstract

As large language models (LLMs) evolve toward agentic AI, coding agents are emerging as memory-intensive workloads that repeatedly reuse persistent states, including contexts and KV caches. Emerging agentic workflows, including Loop/Graph Engineering, cause state amplification through frequent active/dormant transitions, increasing memory pressure. Evicted states incur costly recomputation upon reactivation, particularly under long-context, short-decode workloads. This motivates Capacity-Driven Acceleration (CDA), which explicitly accounts for state amplification to allocate memory capacity between active concurrency and dormant-state retention, replacing recomputation with memory access. In this work, we propose LaFlash, a High-Bandwidth Flash (HBF) architecture that exploits the large capacity of Quad-Level Cell (QLC)-based flash to realize CDA. However, QLC's long read latency demands massive read parallelism under irregular state reactivation and varying context lengths, while limited write endurance constrains placement. LaFlash introduces Session Grouping to balance active request counts and aggregate context lengths across groups, sustaining read parallelism and block utilization through request-exclusive allocation. Furthermore, Fast-Page Allocation exploits QLC's read-latency heterogeneity to mitigate residual inter-group imbalance and sustain bandwidth utilization. On end-to-end coding agent workloads, LaFlash achieves 7.04$\times$ higher throughput and 10.96$\times$ higher energy efficiency over SLC-HBF with batch expansion, and 2.36$\times$ higher throughput over QLC-HBF with CDA. HBM buffering further reduces unnecessary NAND writes, improving QLC write endurance. These results demonstrate the benefits of jointly optimizing state retention and physical data placement for capacity-driven acceleration.

0.14

FLINT: Efficiently Leveraging High Bandwidth Flash for Capacity-Scalable LLM Inference Acceleration

cs.AR cs.AIcs.DC ·2026-08-25 ·Geraldo F. Oliveira, Arash Tavakkol, Xiangyu Zhu, Ahmet Caner Yüzügüler, Vamanan Arulchelvan +8 more
similarity 0.63
Abstract

LLM inference is increasingly constrained by accelerator memory capacity rather than compute throughput. This constraint is especially acute in single-accelerator and small-node inference systems, where limited on-package memory capacity restricts the size of deployable models. HBF is an emerging 3D-stacked NAND flash technology that provides multi-terabyte near-accelerator capacity, making it a promising capacity tier for storing LLM weights. However, existing HBF-based proposals face three adoption challenges: they (1) rely on coarse-grained static prefetching for LLM weights aiming to hide the microsecond-level read latency of the NAND flash device while maximizing HBF's read throughput, (2) expose NAND flash management tasks (e.g., refresh operations) to the accelerator-visible critical inference path, and (3) miss optimization opportunities to specialize and optimize the flash-management mechanisms to the workload behavior. Our goal is to design an efficient HBF substrate that integrates HBF as a memory-capacity tier alongside HBM while addressing these three challenges. To this end, we propose FLINT, a workload-driven HBF substrate for capacity-scalable LLM inference. FLINT introduces three mechanisms: (1) a hardware burst-buffer controller that dynamically coalesces and pipelines HBF reads aiming to utilize existing NAND flash buffers while sustaining high HBF bandwidth, (2) a phantom-plane refresh mechanism, which removes refresh from the critical inference path by moving refresh-related NAND flash operations outside the read foreground back via low-cost resource duplication, and (3) a read-only FTL, which replaces SSD-class support for arbitrary writes with a compact table that translates logical weight bursts to physical HBF locations.

0.25

HBFlex: A Flexible Memory System for Bridging Fine-Grained LLM States and Coarse-Grained HBF Parallel Execution

cs.AR ·2026-09-16 ·Shuzhang Zhong, Weikai Xu, Yifan Zhou, Tongbin Zhao, Tenghao Zhao +5 more
similarity 0.63
Abstract

Large language models (LLMs) require increasing memory capacity to accommodate growing model weights and KV caches. High-Bandwidth Flash (HBF) offers high memory density and aggregate read bandwidth through massive plane-level parallelism, making it an attractive option for LLM serving. However, serving LLMs entirely from HBF introduces three challenges: fine-grained KV reads create placement and access imbalance, incremental writes interfere with foreground reads, and mixed KV lifetimes amplify garbage collection. Hybrid HBM/HBF designs retain HBM to support dynamic KV management, but this allocation reduces the HBF resources available under a fixed packaging budget, limiting aggregate HBF bandwidth. We present HBFlex, a full-HBF memory system with coordinated optimizations for KV reads, writes, and reclamation. HBFlex balances KV placement and attention accesses to improve plane utilization. It aggregates incremental updates and schedules writeback within sufficiently long compute windows to reduce write--read interference. It also combines lifetime-guided block packing with deferred reclamation to reduce valid-page migration. We evaluate HBFlex through trace-driven simulation across different configurations. HBFlex achieves average throughput speedups of up to 1.58$\times$ over FlashAccel and 3.30$\times$ over H3, benefiting from higher HBF bandwidth and more efficient management of dynamic KV-cache reads, writes, and erases.

0.40

Tri-Stack-PIM: A Heterogeneous Multi-Die 3D-Integrated Processing-in-Memory Architecture for Efficient LLM Inference

cs.AR ·2026-11-10 ·Shuao Jia, Zichao Ling, Chen Bai, Kang Zhao, Jianwang Zhai
similarity 0.63
Abstract · 11 pages, 9 figures

Large language model (LLM) inference during autoregressive decoding is fundamentally memory-bandwidth-bound. Existing three-dimensional (3D) stacked processing-in-memory (PIM) architectures alleviate the off-chip bandwidth wall, yet remain constrained by several limitations: physical layer (PHY), controllers, and direct memory access (DMA) engines compete with arithmetic units for advanced-node base-die area; hybrid-bonding keep-out zones fragment the base-die floorplan and impede physical design; compute tiles built in a dynamic random access memory (DRAM) process are restricted to low logic density, capping achievable throughput; and nonlinear operations offloaded to the host reintroduce a communication bottleneck. We present Tri-Stack-PIM, a heterogeneous three-die architecture that resolves these tensions by dedicating a top DRAM die to storage, a middle buffer die on a mature process node to PHYs, DMA engines, and near-memory compute units, and a bottom base die on an advanced node exclusively to single-instruction-multiple-data (SIMD) multiply-accumulate (MAC) arrays. We further introduce a Unified Buffer-Aware Ready-based (UBAR) hardware out-of-order micro-operation scheduler that enforces cross-die dependency correctness at runtime while maximizing issue-slot utilization through a multi-term priority function, recovering up to 90% of the cycles that an in-order policy would forfeit. A joint architecture-dataflow co-exploration identifies Pareto-optimal configurations that reduce the energy-delay product (EDP) by 33-66x over naive parameter selection. Evaluated across multi-head, grouped-query, and multi-query attention (MHA, GQA, MQA) mechanisms with batch sizes 1-32, Tri-Stack-PIM achieves geometric-mean speedups of 4.95x, 2.57x, and 1.68x across all three attention mechanisms and batch sizes over a graphics processing unit (GPU) baseline, AttAcc, and H2-LLM, respectively.

0.20