CS Paper Radar

FLINT: Efficiently Leveraging High Bandwidth Flash for Capacity-Scalable LLM Inference Acceleration

Geraldo F. Oliveira, Arash Tavakkol, Xiangyu Zhu, Ahmet Caner Yüzügüler, Vamanan Arulchelvan, Lukas Cavigelli, Renzo Andri, Mohammad Sadrosadati, Jia Xinglei, Onur Mutlu, Zhou Ke, Shai Bergman, Ji Zhang

cs.AR cs.AIcs.DC ·submitted 2026-08-25 18:58 UTC · v1
highly cited

Abstract

LLM inference is increasingly constrained by accelerator memory capacity rather than compute throughput. This constraint is especially acute in single-accelerator and small-node inference systems, where limited on-package memory capacity restricts the size of deployable models. HBF is an emerging 3D-stacked NAND flash technology that provides multi-terabyte near-accelerator capacity, making it a promising capacity tier for storing LLM weights. However, existing HBF-based proposals face three adoption challenges: they (1) rely on coarse-grained static prefetching for LLM weights aiming to hide the microsecond-level read latency of the NAND flash device while maximizing HBF's read throughput, (2) expose NAND flash management tasks (e.g., refresh operations) to the accelerator-visible critical inference path, and (3) miss optimization opportunities to specialize and optimize the flash-management mechanisms to the workload behavior. Our goal is to design an efficient HBF substrate that integrates HBF as a memory-capacity tier alongside HBM while addressing these three challenges. To this end, we propose FLINT, a workload-driven HBF substrate for capacity-scalable LLM inference. FLINT introduces three mechanisms: (1) a hardware burst-buffer controller that dynamically coalesces and pipelines HBF reads aiming to utilize existing NAND flash buffers while sustaining high HBF bandwidth, (2) a phantom-plane refresh mechanism, which removes refresh from the critical inference path by moving refresh-related NAND flash operations outside the read foreground back via low-cost resource duplication, and (3) a read-only FTL, which replaces SSD-class support for arbitrary writes with a compact table that translates logical weight bursts to physical HBF locations.

Closest papers

Nearest neighbours by meaning across the whole index.

HBFSim: A Simulator for Exploring HBF in Memory Hierarchies for LLMs

cs.AR cs.ET ·2026-10-16 ·Jinheng Li, Guosheng Wang, Hongchao Du, Shangyu Wu, Qiao Li +1 more
publishedcode/datahighly cited similarity 0.81
Abstract

High Bandwidth Flash (HBF) has recently emerged as a promising technology that provides terabyte-scale accelerator-local capacity at bandwidths approaching HBM, with a potential cost-per-bit advantage over HBM. However, its NAND foundation brings long latency, out-of-place updates, and finite write endurance directly into the accelerator memory hierarchy, making its effects on performance and lifetime difficult to predict. To study this emerging design space, we present HBFSim, an LLM-aware event-driven simulator for heterogeneous HBM+HBF memory systems that preserves application-level memory semantics while modeling flash-internal behavior. HBFSim models HBM, HBF with host-managed flash translation, and conventional capacity tiers in one simulation driven by a calibrated serving frontend. Using HBFSim, we study decoding of Llama-3.1-70B and Qwen3-235B-A22B under three workloads that differ in their input and output lengths. HBF serves data that does not fit in HBM 11.0--19.0$\times$ faster than host DRAM; HBM is better used to hold the running sequences' KV cache than as a cache for HBF; and at a published peak load of Llama-3.1-70B, HBF lasts 2.0 to 6.9 years, in proportion to the stacks that share the KV writes. The artifact is available at https://github.com/FlashLabAE/HBFSim and will track public HBF device data as it becomes available.

0.52

SlipStream: Enabling HBF for GPU Systems by Mitigating the Latency and SRAM Overheads

cs.AR cs.DCcs.LG ·2026-11-10 ·Anish Saxena, Hritvik Taneja, Christos Kozyrakis, Aamer Jaleel
top venue similarity 0.79
Abstract · To appear in 2027 IEEE International Symposium on High-Performance Computer Architecture (HPCA)

Large language model (LLM) inference demands ever more memory capacity for larger models and batch sizes. High-Bandwidth Flash (HBF) replaces the DRAM dies of HBM with NAND flash and provides up to 16x the capacity at comparable read bandwidth. However, HBF can incur a read latency of nearly 20$μ$s, 20x that of HBM, so on-demand HBF accesses slow inference by up to 12.8x. Conventional cache-line prefetchers require 20x more in-flight tracking state to cover this latency. Tensor-streaming designs, such as H3, follow virtual-address order as opposed to kernel-demand order, and therefore need hundreds of megabytes of buffering. We propose SlipStream, a software-hardware co-designed prefetcher that turns prefetching into a demand-paced producer-consumer pipeline. In software, SlipStream profiles the repeatable weight-page demand order of data-independent LLM kernels and inserts a staging warp that replays this order with non-blocking STAGE instructions. In hardware, the staging warp acts as the producer and the work warps as consumers. Our key insight is to retire each STAGE tracking entry only when demand first accesses the page, as opposed to when the page returns from HBF. Demand thus paces staging and bounds how far staging leads consumption. SlipStream tracks 4 KB pages instead of cache lines and allocates buffer slots only when pages return, which decouples the buffer size from outstanding traffic. Across seven dense models spanning 16-800 GB, SlipStream with a 40 MB staging buffer achieves 92.4% of the performance of an ideal HBF with HBM-like latency. H3 achieves only 43.1%, even with a 320 MB buffer. The buffer sizing of SlipStream is independent of HBF latency and workload. SlipStream with 16 MB buffer, 20x smaller than that of H3, performs within 4% of SlipStream-40MB. SlipStream also supports Mixture-of-Experts models and reaches 91.2% of ideal performance (40 MB buffer).

0.48

HBFlex: A Flexible Memory System for Bridging Fine-Grained LLM States and Coarse-Grained HBF Parallel Execution

cs.AR ·2026-09-16 ·Shuzhang Zhong, Weikai Xu, Yifan Zhou, Tongbin Zhao, Tenghao Zhao +5 more
similarity 0.78
Abstract

Large language models (LLMs) require increasing memory capacity to accommodate growing model weights and KV caches. High-Bandwidth Flash (HBF) offers high memory density and aggregate read bandwidth through massive plane-level parallelism, making it an attractive option for LLM serving. However, serving LLMs entirely from HBF introduces three challenges: fine-grained KV reads create placement and access imbalance, incremental writes interfere with foreground reads, and mixed KV lifetimes amplify garbage collection. Hybrid HBM/HBF designs retain HBM to support dynamic KV management, but this allocation reduces the HBF resources available under a fixed packaging budget, limiting aggregate HBF bandwidth. We present HBFlex, a full-HBF memory system with coordinated optimizations for KV reads, writes, and reclamation. HBFlex balances KV placement and attention accesses to improve plane utilization. It aggregates incremental updates and schedules writeback within sufficiently long compute windows to reduce write--read interference. It also combines lifetime-guided block packing with deferred reclamation to reduce valid-page migration. We evaluate HBFlex through trace-driven simulation across different configurations. HBFlex achieves average throughput speedups of up to 1.58$\times$ over FlashAccel and 3.30$\times$ over H3, benefiting from higher HBF bandwidth and more efficient management of dynamic KV-cache reads, writes, and erases.

0.38

HBF-Sim: An Extensible HBF Simulator for Large-scale GPU Memory Systems

cs.AR ·2026-09-24 ·Yaqi Li, Jing Wang, Junfeng Wang, Long Yang, Han Yan +2 more
similarity 0.76
Abstract · 12 pages, 9 figures

High-bandwidth flash (HBF) is introduced to address the memory wall, which can co-package a dense NAND stack with the GPU, targeting the performance gap between near-accelerator bandwidth and flash density. HBF, however, is neither a large HBM nor a fast NVMe SSD. Its usable bandwidth depends on how GPU cache-line requests map onto NAND pages, how concurrency spreads across channel-affine die sets, and how media management interacts with the GPU memory pipeline. To our knowledge, existing GPU, SSD, or HBF simulators cannot faithfully model this behavior. We present HBF-Sim, an extensible, reusable, and faithful HBF simulator integrated with simulated GPUs. It closes the loop between GPU issue limits, device queuing, and NAND behavior in one end-to-end request path. HBF-Sim separates a GPU-HBF interaction controller from page-based parallel stack storage, and it models the full GPU-HBF request path. It provides an MSHR-based address mapping table that merges cache-line requests into page-based operations, as well as a page-based multi-stack flash manager for highly parallel reads and writes. Validation tests and device-level microbenchmarks expose performance bottlenecks caused by limited channel distribution and resource conflicts, offering concrete guidance for next-generation HBF architectures.

0.16

Potential Applications of HBF in LLM Serving Systems

cs.AR ·2026-08-13 ·Yihan Yin, Yinlun Zhao, Zhixin Yun, Guanying Wu, Feng Zhu +6 more
similarity 0.76
Abstract

LLM serving is increasingly constrained by memory capacity as model weights, KV caches, and the number of served model variants continue to grow. This report examines High-Bandwidth Flash (HBF) as a capacity-oriented extension to HBM-based serving systems. We first discuss how HBF can be integrated into the GPU memory hierarchy without undermining the bandwidth expected by the compute die. We then model the system-level value of added capacity as expanded residency for read-mostly model-state objects. Under this view, HBF can improve MoE serving by enabling more expert replicas and can improve multi-model serving by reducing model loading and supporting hot-model replication. Our simulation results show that these benefits depend on preserving the HBM-resident execution path while using HBF to expand the resident set of model weights.

0.42

HBFSim: Fast and Faithful Simulation of High-Bandwidth Flash Under Real GPU Execution

cs.AR cs.ET ·2026-09-09 ·Yanpeng Hu, Yiwei Yang, Yuanwu Zhu, Yusheng Zheng, Andi Quinn +1 more
code/data similarity 0.74
Abstract

High-Bandwidth Flash (HBF) places high-capacity NAND beside HBM to relieve the memory-capacity bottleneck of LLM inference, yet its system-level behavior cannot be evaluated before hardware becomes available. Cycle-level GPU simulators are too slow for production-scale models. Trace replay has a further shortcoming: it cannot capture the allocation, migration, and execution changes induced by different HBM-HBF configurations. Our key insight is that HBF need not be evaluated by simulating the GPU: only the program-visible effects of HBF need to be modeled. And only a real LLM workload running on real hardware can answer the arguments about HBF. Hence the modeled service has to be injected into that running program, and the injection must not destroy the GPU concurrency that would hide the original I/O latency. We present HBFSim, an open-source HBF simulator that executes LLM workloads on a real GPU while modeling HBF timing, thermal, and other behaviors online. HBFSim rewrites the PTX of the workload's kernels and routes accesses inside a registered address range into the HBF simulator. It supports asynchronous TMA transfers and capacities beyond physical GPU memory. HBFSim leaves the model's run unaffected across ordinary-memory, TMA, and capacity-mode tests. The delay it injects matches the delay requested to within 0.152%. We also design a coupled thermal module that puts HBF, HBM, and the GPU in one advanced package, which is important for answering how severe the hot throttling problem becomes after HBF runs for a long time. Experiments with Qwen3-30B show how package heating, HBM-HBF allocation, and shared MoE demand jointly constrain the design space of future HBF accelerators. The source code of HBFSim is available at https://github.com/SlugLab/hbfsim/.

0.39

Exploring High-Bandwidth Flash for Modern LLM Inference: Opportunities and Challenges

cs.AR ·2026-08-14 ·Dowon Son, Yonggon Park, Hyunuk Cho, Hyungkyu Ham, Onur Mutlu +3 more
top venuehighly cited similarity 0.73
Abstract · 4 pages, 7 figures, IEEE Computer Architecture Letters (CAL)

This work investigates the potential benefits and technical challenges of using high-bandwidth flash (HBF) for large language model (LLM) inference. HBF has gained increasing attention as a promising solution to mitigate memory-capacity bottlenecks in modern LLM-serving systems, but its benefits and challenges remain largely uninvestigated. To address this gap, we thoroughly analyze HBF-based LLM-serving systems under diverse system configurations and operating scenarios in which HBF serves as a main GPU-memory component to handle both reads and writes. Our analysis shows that, despite its limited write performance, HBF can significantly improve the batch size, throughput, and flexibility of LLM-serving systems while reducing the minimum GPU requirements, but realizing these benefits critically depends on sustaining HBM-comparable read bandwidth and requires significant endurance improvements.

0.77

HBF Sucks? A Full-Stack Characterization of High-Bandwidth Flash for KV-Centric LLM Serving

cs.AR ·2026-08-12 ·Zhuoran Li, Zhuohang Bian, Xin Huang, Yibo Zhao, Guangyu Sun +1 more
highly cited similarity 0.73
Abstract

A faster storage device should make serving faster. We find the opposite. High-Bandwidth Flash (HBF) stacks NAND behind a wide, package-local interface, promising flash-scale capacity with far lower read latency and higher bandwidth than an SSD. The obvious move is to keep an SSD-style Mooncake KV-offloading stack and swap in HBF underneath. We built that system and measured it: an extended TokenSim, four complete two-hour Qwen-Bailian production traces, five dense and mixture-of-experts models, and H100/B200 profiles. The upgrade backfires. Average end-to-end latency rises 2--5.5$\times$ and maximum SLO goodput falls 1.1--2.7$\times$ across H100 and B200, so the faster device yields a slower system. A cost-benefit model explains the paradox: a faster far tier pays off only when read I/O is the bottleneck, reads outweigh writes, and delivered bandwidth is sustainable. Transient KV violates all three at once. Buying flash through the package costs GPU near-tier capacity and bandwidth, while HBF's own read/write latency barely matters: scaling it 3.75$\times$ moves latency less than 1\%. Worse, the two-tier hierarchy keeps reuse in the near tier and hands HBF a relentless write-heavy stream. Writes outnumber reads on every trace, so a 3D-ICE model shows the stack hits its thermal limit well below peak bandwidth, and a TLC tier wears out sooner than the SSD pool it replaced. The device is fine; the drop-in deployment is not. HBF sucks as an SSD replacement for transient KV, but earns its place in LLM serving when used selectively with reuse-aware placement, write budgeting, and thermal coordination.

0.43