CS Paper Radar

HBF Sucks? A Full-Stack Characterization of High-Bandwidth Flash for KV-Centric LLM Serving

Zhuoran Li, Zhuohang Bian, Xin Huang, Yibo Zhao, Guangyu Sun, Youwei Zhuo

cs.AR ·submitted 2026-08-12 05:25 UTC · v4
highly cited

Abstract

A faster storage device should make serving faster. We find the opposite. High-Bandwidth Flash (HBF) stacks NAND behind a wide, package-local interface, promising flash-scale capacity with far lower read latency and higher bandwidth than an SSD. The obvious move is to keep an SSD-style Mooncake KV-offloading stack and swap in HBF underneath. We built that system and measured it: an extended TokenSim, four complete two-hour Qwen-Bailian production traces, five dense and mixture-of-experts models, and H100/B200 profiles. The upgrade backfires. Average end-to-end latency rises 2--5.5$\times$ and maximum SLO goodput falls 1.1--2.7$\times$ across H100 and B200, so the faster device yields a slower system. A cost-benefit model explains the paradox: a faster far tier pays off only when read I/O is the bottleneck, reads outweigh writes, and delivered bandwidth is sustainable. Transient KV violates all three at once. Buying flash through the package costs GPU near-tier capacity and bandwidth, while HBF's own read/write latency barely matters: scaling it 3.75$\times$ moves latency less than 1\%. Worse, the two-tier hierarchy keeps reuse in the near tier and hands HBF a relentless write-heavy stream. Writes outnumber reads on every trace, so a 3D-ICE model shows the stack hits its thermal limit well below peak bandwidth, and a TLC tier wears out sooner than the SSD pool it replaced. The device is fine; the drop-in deployment is not. HBF sucks as an SSD replacement for transient KV, but earns its place in LLM serving when used selectively with reuse-aware placement, write budgeting, and thermal coordination.

Closest papers

Nearest neighbours by meaning across the whole index.

HBFlex: A Flexible Memory System for Bridging Fine-Grained LLM States and Coarse-Grained HBF Parallel Execution

cs.AR ·2026-09-16 ·Shuzhang Zhong, Weikai Xu, Yifan Zhou, Tongbin Zhao, Tenghao Zhao +5 more
similarity 0.74
Abstract

Large language models (LLMs) require increasing memory capacity to accommodate growing model weights and KV caches. High-Bandwidth Flash (HBF) offers high memory density and aggregate read bandwidth through massive plane-level parallelism, making it an attractive option for LLM serving. However, serving LLMs entirely from HBF introduces three challenges: fine-grained KV reads create placement and access imbalance, incremental writes interfere with foreground reads, and mixed KV lifetimes amplify garbage collection. Hybrid HBM/HBF designs retain HBM to support dynamic KV management, but this allocation reduces the HBF resources available under a fixed packaging budget, limiting aggregate HBF bandwidth. We present HBFlex, a full-HBF memory system with coordinated optimizations for KV reads, writes, and reclamation. HBFlex balances KV placement and attention accesses to improve plane utilization. It aggregates incremental updates and schedules writeback within sufficiently long compute windows to reduce write--read interference. It also combines lifetime-guided block packing with deferred reclamation to reduce valid-page migration. We evaluate HBFlex through trace-driven simulation across different configurations. HBFlex achieves average throughput speedups of up to 1.58$\times$ over FlashAccel and 3.30$\times$ over H3, benefiting from higher HBF bandwidth and more efficient management of dynamic KV-cache reads, writes, and erases.

0.39

FLINT: Efficiently Leveraging High Bandwidth Flash for Capacity-Scalable LLM Inference Acceleration

cs.AR cs.AIcs.DC ·2026-08-25 ·Geraldo F. Oliveira, Arash Tavakkol, Xiangyu Zhu, Ahmet Caner Yüzügüler, Vamanan Arulchelvan +8 more
similarity 0.73
Abstract

LLM inference is increasingly constrained by accelerator memory capacity rather than compute throughput. This constraint is especially acute in single-accelerator and small-node inference systems, where limited on-package memory capacity restricts the size of deployable models. HBF is an emerging 3D-stacked NAND flash technology that provides multi-terabyte near-accelerator capacity, making it a promising capacity tier for storing LLM weights. However, existing HBF-based proposals face three adoption challenges: they (1) rely on coarse-grained static prefetching for LLM weights aiming to hide the microsecond-level read latency of the NAND flash device while maximizing HBF's read throughput, (2) expose NAND flash management tasks (e.g., refresh operations) to the accelerator-visible critical inference path, and (3) miss optimization opportunities to specialize and optimize the flash-management mechanisms to the workload behavior. Our goal is to design an efficient HBF substrate that integrates HBF as a memory-capacity tier alongside HBM while addressing these three challenges. To this end, we propose FLINT, a workload-driven HBF substrate for capacity-scalable LLM inference. FLINT introduces three mechanisms: (1) a hardware burst-buffer controller that dynamically coalesces and pipelines HBF reads aiming to utilize existing NAND flash buffers while sustaining high HBF bandwidth, (2) a phantom-plane refresh mechanism, which removes refresh from the critical inference path by moving refresh-related NAND flash operations outside the read foreground back via low-cost resource duplication, and (3) a read-only FTL, which replaces SSD-class support for arbitrary writes with a compact table that translates logical weight bursts to physical HBF locations.

0.25

Characterizing High Bandwidth Flash for LLM Serving

cs.LG cs.ARcs.DC ·2026-09-30 ·Zack Yu, Chloe Wong, Coleman Hooper, Minjae Lee, Wonjun Kang +5 more
similarity 0.72
Abstract

Large language model (LLM) serving requires substantial memory to store model weights and KV caches. As models grow larger and contexts become longer, memory capacity and bandwidth increasingly become bottlenecks for serving performance. Agentic workloads compound this pressure through repeated interactions over growing contexts, making it increasingly important to retain KV state for reuse. High-bandwidth flash (HBF) offers a way to expand accelerator memory capacity for large language model (LLM) serving, but its access costs and limited write endurance complicate its use. We evaluate HBF for high-throughput agentic serving across system design and scheduling choices to understand when additional capacity improves serving performance and energy efficiency. We introduce an HBM-HBF-host hierarchical storage system and buffered cache-aware scheduling, and use trace-driven simulations to analyze their effects on performance, energy consumption, and HBF write lifetime. Across the evaluated workloads, the fastest HBF-augmented systems reduce completion time by 36.1-87.7% relative to HBM-only systems. Modeled energy savings reach 59.1%, with benefits depending on the workload and weight placement. Buffered cache-aware scheduling extends estimated HBF write lifetime from 1.21 to 14.82 years in the evaluated configuration. These results demonstrate the importance of coordinating data placement and scheduling to improve serving efficiency while sustaining a practical HBF write lifetime.

0.25

HBFSim: A Simulator for Exploring HBF in Memory Hierarchies for LLMs

cs.AR cs.ET ·2026-10-16 ·Jinheng Li, Guosheng Wang, Hongchao Du, Shangyu Wu, Qiao Li +1 more
publishedcode/datahighly cited similarity 0.72
Abstract

High Bandwidth Flash (HBF) has recently emerged as a promising technology that provides terabyte-scale accelerator-local capacity at bandwidths approaching HBM, with a potential cost-per-bit advantage over HBM. However, its NAND foundation brings long latency, out-of-place updates, and finite write endurance directly into the accelerator memory hierarchy, making its effects on performance and lifetime difficult to predict. To study this emerging design space, we present HBFSim, an LLM-aware event-driven simulator for heterogeneous HBM+HBF memory systems that preserves application-level memory semantics while modeling flash-internal behavior. HBFSim models HBM, HBF with host-managed flash translation, and conventional capacity tiers in one simulation driven by a calibrated serving frontend. Using HBFSim, we study decoding of Llama-3.1-70B and Qwen3-235B-A22B under three workloads that differ in their input and output lengths. HBF serves data that does not fit in HBM 11.0--19.0$\times$ faster than host DRAM; HBM is better used to hold the running sequences' KV cache than as a cache for HBF; and at a published peak load of Llama-3.1-70B, HBF lasts 2.0 to 6.9 years, in proportion to the stacks that share the KV writes. The artifact is available at https://github.com/FlashLabAE/HBFSim and will track public HBF device data as it becomes available.

0.52

Hot-Cold Tiering of HBM and High Bandwidth Flash for Agentic LLM Serving

cs.AR ·2026-09-22 ·Jongjin Baek, Won Ji, Seungjae Yoo, Joo-Young Kim
top venue similarity 0.72
Abstract

Large language model (LLM) serving is increasingly agentic, with multi-turn sessions that idle between actions yet must retain their full context. Limited GPU memory capacity forces inactive KV states to be evicted, so resuming a session incurs either costly recomputation or slow interconnect transfers. To address this, high bandwidth flash (HBF)-an on-package 3D-NAND memory offering orders-of-magnitude greater capacity than high bandwidth memory (HBM) at comparable read bandwidth-has emerged as a strong candidate. However, its high read energy and limited write endurance make it impractical to serve all KV traffic. Fortunately, our analysis shows that agentic KV states exhibit distinct access patterns: a small hot set is read for every decoding step, while a large cold pool is read only when a paused session resumes. Exploiting this, we place the hot set in HBM and the cold pool in HBF, forming a hot-cold KV hierarchy within the GPU memory tier. On agentic workloads with Qwen3-Coder-30B-A3B, our design delivers 14 ms time-between-tokens (TBT) and adds only $\approx$0.1 ms of resume latency on top of prefill, while hosting $24\times$ more concurrent sessions per GPU. By confining HBM to the hot set, our design also cuts read power by 7.6 kW per 8-GPU node relative to serving all KV from flash-establishing HBF as a cold-tier complement to HBM rather than its replacement.

0.57

Potential Applications of HBF in LLM Serving Systems

cs.AR ·2026-08-13 ·Yihan Yin, Yinlun Zhao, Zhixin Yun, Guanying Wu, Feng Zhu +6 more
similarity 0.71
Abstract

LLM serving is increasingly constrained by memory capacity as model weights, KV caches, and the number of served model variants continue to grow. This report examines High-Bandwidth Flash (HBF) as a capacity-oriented extension to HBM-based serving systems. We first discuss how HBF can be integrated into the GPU memory hierarchy without undermining the bandwidth expected by the compute die. We then model the system-level value of added capacity as expanded residency for read-mostly model-state objects. Under this view, HBF can improve MoE serving by enabling more expert replicas and can improve multi-model serving by reducing model loading and supporting hot-model replication. Our simulation results show that these benefits depend on preserving the HBM-resident execution path while using HBF to expand the resident set of model weights.

0.42

Enabling High-Bandwidth Flash for Generative Recommendation Serving with Write-Aware KV Cache Policy

cs.AR ·2026-09-07 ·Danni Peng, Kai Wu, Tianyu Zuo, Pengfei Xia, Hui Zang
similarity 0.69
Abstract · 5 pages, 7 figures

Generative recommendation (GR) systems increasingly leverage user-level KV cache reuse to avoid recomputing long user histories. However, the growing KV cache capacity and bandwidth requirements introduce new challenges for memory system. High-Bandwidth Flash (HBF) provides a promising solution by offering substantially higher capacity than HBM while approaching HBM-class read bandwidth, enabling larger scale KV cache retention and improved serving throughput. Yet conventional Least-Recently-Used (LRU) KV cache management tightly couples KV cache writes with cache misses, generating excessive write traffic that rapidly exhausts flash endurance. In this work, we evaluate a write-aware KV cache policy based on admission-controlled LRU-K for HBF-based GR serving. By filtering low-reuse users before cache admission, LRU-K decouples KV cache writes from misses and significantly reduces unnecessary writes. We develop an analytical model to characterize GR serving performance, KV cache write traffic, and HBF lifetime, and evaluate performance across diverse memory systems and GR workloads. Our results show that HBF-based systems achieve 3.8 to 4.7 times higher throughput than HBM-only systems. Moreover, LRU-K extends HBF lifetime from about one year under conventional LRU to over six years with a moderate K=10, while maintaining comparable or even slightly improved throughput. These results highlight the importance of write aware KV cache policy for sustainable HBF-based GR serving.

0.47

When Is High-Bandwidth Flash Cost-Effective for LLM Inference?

cs.AR ·2026-11-08 ·Zhiyu An, Yiping Li, Wan Du
similarity 0.69
Abstract

Can high-bandwidth flash (HBF) make LLM inference cheaper than adding GPUs? By storing weights closer to the GPU than SSD, HBF may reduce the number of GPUs needed for model capacity. However, this integration is only justified if it meets service targets and its cost is recovered. We simulate this integration using public component data across nine dense and mixture-of-experts (MoE) models, five workloads, two GPU platforms, and 1--100 GPUs. At fixed demand, HBF reduces the minimum GPU count to meet a service target in 98 of 468 comparisons; majority of them are paused and short sessions, 63 remain cost-effective at half a GPU price per HBF stack. For single short-chat users, HBF enables large MoEs, e.g. DeepSeek V3 and Kimi K2, to meet a relaxed service target on one RTX~4090 GPU, where conventional serving fails. At fixed GPU count, HBF improves throughput in 48\% of matched comparisons below 16 GPUs and 13\% at larger counts. Even at 100 RTX~4090-scale GPUs, cascaded HBF raises offline throughput by 16.4--26.5$\times$ for three large MoEs. We found savings and throughput gains arise in different scenarios.

0.22