CS Paper Radar

When Is High-Bandwidth Flash Cost-Effective for LLM Inference?

Zhiyu An, Yiping Li, Wan Du

cs.AR ·submitted 2026-11-08 00:37 UTC · v1

Abstract

Can high-bandwidth flash (HBF) make LLM inference cheaper than adding GPUs? By storing weights closer to the GPU than SSD, HBF may reduce the number of GPUs needed for model capacity. However, this integration is only justified if it meets service targets and its cost is recovered. We simulate this integration using public component data across nine dense and mixture-of-experts (MoE) models, five workloads, two GPU platforms, and 1--100 GPUs. At fixed demand, HBF reduces the minimum GPU count to meet a service target in 98 of 468 comparisons; majority of them are paused and short sessions, 63 remain cost-effective at half a GPU price per HBF stack. For single short-chat users, HBF enables large MoEs, e.g. DeepSeek V3 and Kimi K2, to meet a relaxed service target on one RTX~4090 GPU, where conventional serving fails. At fixed GPU count, HBF improves throughput in 48\% of matched comparisons below 16 GPUs and 13\% at larger counts. Even at 100 RTX~4090-scale GPUs, cascaded HBF raises offline throughput by 16.4--26.5$\times$ for three large MoEs. We found savings and throughput gains arise in different scenarios.

Closest papers

Nearest neighbours by meaning across the whole index.

HBFSim: Fast and Faithful Simulation of High-Bandwidth Flash Under Real GPU Execution

cs.AR cs.ET ·2026-09-09 ·Yanpeng Hu, Yiwei Yang, Yuanwu Zhu, Yusheng Zheng, Andi Quinn +1 more
code/data similarity 0.76
Abstract

High-Bandwidth Flash (HBF) places high-capacity NAND beside HBM to relieve the memory-capacity bottleneck of LLM inference, yet its system-level behavior cannot be evaluated before hardware becomes available. Cycle-level GPU simulators are too slow for production-scale models. Trace replay has a further shortcoming: it cannot capture the allocation, migration, and execution changes induced by different HBM-HBF configurations. Our key insight is that HBF need not be evaluated by simulating the GPU: only the program-visible effects of HBF need to be modeled. And only a real LLM workload running on real hardware can answer the arguments about HBF. Hence the modeled service has to be injected into that running program, and the injection must not destroy the GPU concurrency that would hide the original I/O latency. We present HBFSim, an open-source HBF simulator that executes LLM workloads on a real GPU while modeling HBF timing, thermal, and other behaviors online. HBFSim rewrites the PTX of the workload's kernels and routes accesses inside a registered address range into the HBF simulator. It supports asynchronous TMA transfers and capacities beyond physical GPU memory. HBFSim leaves the model's run unaffected across ordinary-memory, TMA, and capacity-mode tests. The delay it injects matches the delay requested to within 0.152%. We also design a coupled thermal module that puts HBF, HBM, and the GPU in one advanced package, which is important for answering how severe the hot throttling problem becomes after HBF runs for a long time. Experiments with Qwen3-30B show how package heating, HBM-HBF allocation, and shared MoE demand jointly constrain the design space of future HBF accelerators. The source code of HBFSim is available at https://github.com/SlugLab/hbfsim/.

0.40

Potential Applications of HBF in LLM Serving Systems

cs.AR ·2026-08-13 ·Yihan Yin, Yinlun Zhao, Zhixin Yun, Guanying Wu, Feng Zhu +6 more
similarity 0.75
Abstract

LLM serving is increasingly constrained by memory capacity as model weights, KV caches, and the number of served model variants continue to grow. This report examines High-Bandwidth Flash (HBF) as a capacity-oriented extension to HBM-based serving systems. We first discuss how HBF can be integrated into the GPU memory hierarchy without undermining the bandwidth expected by the compute die. We then model the system-level value of added capacity as expanded residency for read-mostly model-state objects. Under this view, HBF can improve MoE serving by enabling more expert replicas and can improve multi-model serving by reducing model loading and supporting hot-model replication. Our simulation results show that these benefits depend on preserving the HBM-resident execution path while using HBF to expand the resident set of model weights.

0.42

Beyond Capacity: Scalable MoE LLM Inference via High-Bandwidth Flash with Direct GPU and HBM Paths

cs.AR ·2026-08-14 ·Seeyeon Kim, Juhyeong Jin, Joo-Young Kim
highly cited similarity 0.75
Abstract

Modern mixture-of-experts (MoE) language models increasingly strain the capacity and cost efficiency of high-bandwidth memory (HBM), as rapidly growing expert weights must be provisioned close to GPUs. High-bandwidth flash (HBF) offers substantially greater capacity, but conventional designs typically deliver HBF-resident expert weights to the GPU through HBM, leaving an additional direct GPU-HBF connection underutilized. We explore an HBF organization that simultaneously exploits two independent expert-delivery routes: a direct path that transfers expert weights from HBF to the GPU and a relay path that transfers them from HBF through the HBM base die to the GPU. Whole experts are assigned to one of the two routes, and transfers over both routes proceed concurrently, increasing aggregate expert-delivery bandwidth without replicating expert weights or introducing a shared relay bottleneck. Early expert determination identifies upcoming experts ahead of their conventional execution point, allowing HBF read latency to overlap with preceding computation, while separate management of immutable expert weights and mutable KV-cache data reduces interference between the two traffic classes. We evaluate the architecture using an event-driven continuous-batching LLM serving simulator with empirically measured GPU compute latencies. Across representative MoE workloads, concurrently utilizing the direct GPU-HBF and HBF-HBM-GPU routes consistently improves expert-delivery efficiency over designs restricted to either route alone. For a representative workload, the proposed architecture can achieve 1.94$\times$ higher throughput and 1.90$\times$ end-to-end speedup over a design that delivers all HBF-resident expert weights to the GPU through the HBM base die.

0.43

Exploring High-Bandwidth Flash for Modern LLM Inference: Opportunities and Challenges

cs.AR ·2026-08-14 ·Dowon Son, Yonggon Park, Hyunuk Cho, Hyungkyu Ham, Onur Mutlu +3 more
top venuehighly cited similarity 0.74
Abstract · 4 pages, 7 figures, IEEE Computer Architecture Letters (CAL)

This work investigates the potential benefits and technical challenges of using high-bandwidth flash (HBF) for large language model (LLM) inference. HBF has gained increasing attention as a promising solution to mitigate memory-capacity bottlenecks in modern LLM-serving systems, but its benefits and challenges remain largely uninvestigated. To address this gap, we thoroughly analyze HBF-based LLM-serving systems under diverse system configurations and operating scenarios in which HBF serves as a main GPU-memory component to handle both reads and writes. Our analysis shows that, despite its limited write performance, HBF can significantly improve the batch size, throughput, and flexibility of LLM-serving systems while reducing the minimum GPU requirements, but realizing these benefits critically depends on sustaining HBM-comparable read bandwidth and requires significant endurance improvements.

0.77

HBF-Sim: An Extensible HBF Simulator for Large-scale GPU Memory Systems

cs.AR ·2026-09-24 ·Yaqi Li, Jing Wang, Junfeng Wang, Long Yang, Han Yan +2 more
similarity 0.71
Abstract · 12 pages, 9 figures

High-bandwidth flash (HBF) is introduced to address the memory wall, which can co-package a dense NAND stack with the GPU, targeting the performance gap between near-accelerator bandwidth and flash density. HBF, however, is neither a large HBM nor a fast NVMe SSD. Its usable bandwidth depends on how GPU cache-line requests map onto NAND pages, how concurrency spreads across channel-affine die sets, and how media management interacts with the GPU memory pipeline. To our knowledge, existing GPU, SSD, or HBF simulators cannot faithfully model this behavior. We present HBF-Sim, an extensible, reusable, and faithful HBF simulator integrated with simulated GPUs. It closes the loop between GPU issue limits, device queuing, and NAND behavior in one end-to-end request path. HBF-Sim separates a GPU-HBF interaction controller from page-based parallel stack storage, and it models the full GPU-HBF request path. It provides an MSHR-based address mapping table that merges cache-line requests into page-based operations, as well as a page-based multi-stack flash manager for highly parallel reads and writes. Validation tests and device-level microbenchmarks expose performance bottlenecks caused by limited channel distribution and resource conflicts, offering concrete guidance for next-generation HBF architectures.

0.16

FLINT: Efficiently Leveraging High Bandwidth Flash for Capacity-Scalable LLM Inference Acceleration

cs.AR cs.AIcs.DC ·2026-08-25 ·Geraldo F. Oliveira, Arash Tavakkol, Xiangyu Zhu, Ahmet Caner Yüzügüler, Vamanan Arulchelvan +8 more
similarity 0.70
Abstract

LLM inference is increasingly constrained by accelerator memory capacity rather than compute throughput. This constraint is especially acute in single-accelerator and small-node inference systems, where limited on-package memory capacity restricts the size of deployable models. HBF is an emerging 3D-stacked NAND flash technology that provides multi-terabyte near-accelerator capacity, making it a promising capacity tier for storing LLM weights. However, existing HBF-based proposals face three adoption challenges: they (1) rely on coarse-grained static prefetching for LLM weights aiming to hide the microsecond-level read latency of the NAND flash device while maximizing HBF's read throughput, (2) expose NAND flash management tasks (e.g., refresh operations) to the accelerator-visible critical inference path, and (3) miss optimization opportunities to specialize and optimize the flash-management mechanisms to the workload behavior. Our goal is to design an efficient HBF substrate that integrates HBF as a memory-capacity tier alongside HBM while addressing these three challenges. To this end, we propose FLINT, a workload-driven HBF substrate for capacity-scalable LLM inference. FLINT introduces three mechanisms: (1) a hardware burst-buffer controller that dynamically coalesces and pipelines HBF reads aiming to utilize existing NAND flash buffers while sustaining high HBF bandwidth, (2) a phantom-plane refresh mechanism, which removes refresh from the critical inference path by moving refresh-related NAND flash operations outside the read foreground back via low-cost resource duplication, and (3) a read-only FTL, which replaces SSD-class support for arbitrary writes with a compact table that translates logical weight bursts to physical HBF locations.

0.25

Characterizing High Bandwidth Flash for LLM Serving

cs.LG cs.ARcs.DC ·2026-09-30 ·Zack Yu, Chloe Wong, Coleman Hooper, Minjae Lee, Wonjun Kang +5 more
similarity 0.70
Abstract

Large language model (LLM) serving requires substantial memory to store model weights and KV caches. As models grow larger and contexts become longer, memory capacity and bandwidth increasingly become bottlenecks for serving performance. Agentic workloads compound this pressure through repeated interactions over growing contexts, making it increasingly important to retain KV state for reuse. High-bandwidth flash (HBF) offers a way to expand accelerator memory capacity for large language model (LLM) serving, but its access costs and limited write endurance complicate its use. We evaluate HBF for high-throughput agentic serving across system design and scheduling choices to understand when additional capacity improves serving performance and energy efficiency. We introduce an HBM-HBF-host hierarchical storage system and buffered cache-aware scheduling, and use trace-driven simulations to analyze their effects on performance, energy consumption, and HBF write lifetime. Across the evaluated workloads, the fastest HBF-augmented systems reduce completion time by 36.1-87.7% relative to HBM-only systems. Modeled energy savings reach 59.1%, with benefits depending on the workload and weight placement. Buffered cache-aware scheduling extends estimated HBF write lifetime from 1.21 to 14.82 years in the evaluated configuration. These results demonstrate the importance of coordinating data placement and scheduling to improve serving efficiency while sustaining a practical HBF write lifetime.

0.25

SSD-LLaMA: SSD-Native Inference for Trillion-Parameter MoE at 1+ Token/s on a Consumer PC

cs.DC ·2026-09-16 ·Fangzhou Liang, Yibin Shen, Jianmin Hu, Jiayang Xu, Hanchi Gao +2 more
similarity 0.70
Abstract

Frontier open-weight language models increasingly use Mixture-of-Experts (MoE) architectures to expand model capacity while activating only a small subset of experts per token. Local inference must nevertheless keep the complete expert pool available, which remains far beyond consumer-grade RAM and VRAM capacity even after quantization. SSDs provide practical capacity at this scale, but turning that capacity into executable model memory requires efficient expert delivery, coordinated management of SSD, RAM, and VRAM, and CPU--GPU hybrid execution under bounded bandwidth. We present \textit{SSD-LLaMA}, an SSD-native local MoE inference system that addresses these challenges with an SSD I/O pipeline optimized for expert delivery, a native three-tier storage hierarchy that delivers and retains experts dynamically, and balanced CPU--GPU hybrid execution. \textit{SSD-LLaMA} executes every selected expert without pruning or substitution. Across three frontier MoE model families, \textit{SSD-LLaMA} improves prefill token rate by 1.52$\times$--4.19$\times$ and decode token rate by 2.10$\times$--15.58$\times$ over the evaluated baselines. We also achieve higher than 1 token/s for running trillion-parameter model with a single RTX 5090 and no more than 32GB RAM.

0.42