CS Paper Radar

A two-stage diffusion-driven morphogenesis model with evolving connectivity

Alexander Safonov

cs.ET q-bio.QM ·submitted 2026-10-30 14:27 UTC · v1
unusual

Abstract

Morphogenesis of diatom silica shells involves a sequence of topological transitions: initially separate ribs grow and branch, then merge through bridges, leaving a regular network of pores. Existing models based on diffusion-limited aggregation or reaction-diffusion reproduce either branching or pore formation, but not both within a single framework. Here we propose a two-stage model of diffusion-driven morphogenesis with evolving connectivity. The model is formulated on a fixed finite element mesh with a density field on an active layer. Stage 1 reproduces dendritic growth, where a stimulus based on the local diffusive flux exceeds a threshold. Stage 2 uses an inverted stimulus, where high local flux suppresses precipitation, stabilizing pores between the dendrites. The update rules are analogous to sensitivity in density-based topology optimization and to strain energy density in bone remodeling. The model predicts distinct morphological regimes on each stage, controlled by the respective thresholds. For a reference calculation, the predicted pore network is regular, with approximately uniform spacing, and pores are absent near the domain edges, consistent with observations on diatom valves. The model provides a unified framework for describing both stages of silica morphogenesis and suggests a route for comparing computational predictions with cryo-electron tomography data.

Comment
Submitted to Applied Mathematical Modelling. Animation available at https://doi.org/10.5281/zenodo.23808711

Closest papers

Nearest neighbours by meaning across the whole index.

TI$^2$PS: A Topology-Informed Inverse Design Framework for Stochastic Multicellular Pattern Formation

cs.LG ·2026-08-28 ·Kenji Komiya, Andrew Kailiang Jin, Ryo Nishikimi, Kunio Kashino
similarity 0.49
Abstract · 13 pages, 5 figures

This study proposes a novel framework to estimate parameters for reproducing target multicellular patterns using an agent-based model (ABM). Two major challenges in multicellular ABMs are estimating cell-level parameters (agent-specific variables) and quantitatively evaluating the topological characteristics of multicellular arrangements under stochastic cell proliferation and death. To address these challenges, we integrate two approaches: Betti vectors and inverse surrogate modeling. The Betti vectors obtained through topological data analysis can consistently represent features of a wide range of multicellular spatial configurations. The inverse surrogate modeling enables direct inference of the corresponding ABM parameters from the target patterns. We validated the proposed framework using zebrafish pigment pattern formation, a representative model of pattern formation driven by multicellular interactions. The results demonstrate that our framework successfully estimates ABM parameters and outperforms conventional methods such as PointNet++. Notably, the proposed method, which used only 10% of the training data, outperformed PointNet++, which used 100% of the data, across all evaluation metrics.

0.29

Concurrent two-scale topology optimization of printable bone scaffolds via rectified-flow generation and exact latent-space refinement

cs.LG physics.comp-ph ·2026-10-18 ·Reza T Batley, Sourav Saha
benchmarkunusual similarity 0.49
Abstract

Bone scaffolds must reconcile a macroscale mechanical response with microscale geometric feasibility, yet conventional approaches to their design restrict attainable constitutive properties. This work presents a concurrent two-scale topology optimization framework; a conditional rectified flow generates periodic lattice microstructures, which are then refined in latent space by exact finite-element homogenization sensitivities. The resulting unit-cell geometries and their spatial assignments are jointly optimized under mechanical and feature-size constraints. In a distal rabbit femur benchmark, all eight flow-started refinements produce printable cells with maximum relative errors under 1\% across six prescribed engineering moduli. Constructing the implant from a single tiled cell reproduces intact whole-femur compliance within 0.1\% and regional strain energy within 0.35\% under four loading conditions. In human femoral reconstruction, multiscale concurrent optimization produces a cortical mid-shaft scaffold with porosity 63\% while satisfying the compliance constraint within 2\% under walking and stair-climbing loads. It achieves an 84\% porosity on a proximal cancellous scaffold with strain-energy deviations below 0.25\% under the same loads. Analysis of the learned representations reveals distinct architectural families in latent space. Further, the attention heads of the rectified-flow transformer specialize for spatial shifts -- learning the analogue of a finite-difference stencil -- and coordinate symmetries, with ablations showing their influence on generated topologies. These results establish a route to printable, mechanically constrained scaffold designs. The framework is general enough for extending to many other multiscale structural design applications including topology-microstructure co-design in metal additive manufacturing.

0.22

A meshfree solver for coupled bulk-surface problems with self-organizing surface geometry

cs.CE math.NAphysics.comp-ph ·2026-09-02 ·Lennart J. Schulze, Alejandra Foggia, Ivo F. Sbalzarini
similarity 0.49
Abstract

In many systems, the interaction between a deformable surface or interface and the surrounding bulk fluid is coupled with intrinsic spatiotemporal dynamics within the moving surface. Examples include tumor growth, biological tissue morphogenesis, cardiac mechanics, multi-phase surfactant chemistry, additive manufacturing, clothing wear-and-tear, and reactive combustion flows. Solving such problems requires both geometric computing algorithms to track and resolve the surface and numerical methods to solve the coupled governing equations in the surface and the surrounding bulk phase. Here, we present a fully meshfree numerical solver for such coupled bulk-surface problems with deformable interfaces. The presented solver tracks the surface implicitly, solving for the dynamic surface geometry based on stress balance coupled to surrounding fluid phases. We show convergence for a mass-conserving case on a growing sphere and solve bulk-surface problems with incompressible Navier-Stokes fluids coupled to in-surface nonlinear reaction-diffusion dynamics. Finally, we show a model of biological morphogenesis, solving simultaneously for the dynamic surface shape and the fields on the curved surface with two-way coupling.

0.30

System-Theoretic Analysis of Extended Cellular Potts Models for Tumor Invasion

eess.SY q-bio.CB ·2026-11-04 ·Andrea Tramaloni, Simone Baroncini, Sofia Avnet, Nicola Baldini, Giuseppe Notarstefano
similarity 0.46
Abstract

The Cellular Potts Model has emerged as a standard framework for modeling multicellular systems and metastatic progression. Yet, computational extensions incorporating cell movement within spatial gradients of Extracellular Matrix (ECM), an important element of the tissue microenvironment, lack theoretical foundations. This work provides a system-theoretic formulation and analysis of Extended Cellular Potts Models (ECPMs) that explicitly couple tumor dynamics with ECM degradation. We reformulate the ECPM as an interconnected dynamical system: a stochastic process describing a network of locally interacting tumor cells coupled to a jump-linear system describing ECM evolution. By exploiting the sparse energy structure of the model, we characterize asymptotic ECM behavior, transition probabilities with uniform bounds, and global system convergence. In one-dimensional settings, we derive closed-form expressions for invasion time probabilities, revealing how mean invasion time depends on local ECM gradients, number of cells and their tendency to maintain a target volume. Numerical simulations validate theoretical predictions, establishing a principled foundation for analyzing haptotaxis-driven invasion in Potts-based models.

0.28

Neural Stochastic Forecasting for Lateral Molecular Diffusion Simulations

cs.LG ·2026-11-04 ·Jacob Ede Levine, Mario Hidalgo-Soria, Chen Yun Wen, Yun Lyna Luo, Sai Chandra Kosaraju
similarity 0.46
Abstract

Predicting the long-time diffusion of membrane proteins is challenging because molecular dynamics (MD) simulations are computationally expensive, while experimental single-particle tracking is often limited by finite observation times. Here, we introduce a neural stochastic (NS) model for forecasting the collective diffusion of membrane proteins from coarse-grained MD trajectories. The model combines a transformer-based representation of protein configurations, recurrent networks operating at multiple temporal scales, and a stochastic latent process with learned memory. A cross-attention decoder then generates correlated protein displacements while accounting for the instantaneous system geometry and periodic boundary conditions. We evaluate the model in two membrane systems: seven interacting PIEZO channels and a mixed system containing seven PIEZO and ten TREK channels. For the seven PIEZO system, the NS model reproduces the anomalous diffusion exponent measured in MD simulations $α\sim 1$, substantially improving on a previously developed variational autoregressive model that exhibits superdiffusive behavior. The model also generates trajectories extending to 40,000 frames and captures the distinct diffusion characteristics of PIEZO and TREK populations in the mixed system. Comparisons of time-averaged mean-square displacements, Van Hove displacement distributions, and non-Gaussian parameters show that the model preserves key statistical features of the simulated dynamics. These results establish neural stochastic modeling as a promising approach for generating long trajectories of multi-protein membrane diffusion and extending the statistical analysis of molecular dynamics simulations.

0.25

OmniRemesh: Adaptive and Quasi-differentiable Remeshing for Crystal Plasticity Simulation and Inverse Parameter Calibration under Large Deformation

cs.CE ·2026-08-16 ·Ningyu Yan, Yuntong Huang, Yang Xiang
similarity 0.45
Abstract

Large-deformation crystal plasticity finite element method (CPFEM) simulations are often limited by accumulated mesh distortion, which degrades accuracy and numerical stability, while adaptive remeshing introduces discrete topology changes that impede gradient-based inverse analysis. We present OmniRemesh, a unified framework that addresses these forward and inverse challenges through two developments. First, a structure-driven remeshing method dynamically redistributes local mesh resolution according to both microstructural geometry and the evolving mechanical state. By refining grain boundaries and localized deformation regions while retaining a coarser mesh elsewhere, the method maintains mesh quality and physical consistency, improves the accuracy and robustness of large-deformation calculations, and resolves grain-scale heterogeneity without uniformly dense discretization. Second, a frozen-remeshing-branch strategy locally fixes the mesh sequence within a parameter trust region and periodically updates it as the parameters evolve. This treatment provides approximate automatic-differentiation sensitivities despite topology changes, enabling efficient inverse calibration of constitutive parameters against both macroscopic and local observables. Numerical examples demonstrate accurate and stable CPFEM simulations up to 80\% tensile deformation. The inverse calibration successfully recovers both macroscopic and local responses. OmniRemesh thus provides a practical framework for large-deformation CPFEM and remeshing-aware constitutive calibration.

0.04

Probing and steering biology across Boltz-1s trunk-diffusion boundary

cs.LG q-bio.QM ·2026-08-11 ·Piotr Jedryszek, Tongmeng Xie, Adam Winnifrith, Alexander Hasson, Weronika Ślesak +3 more
similarity 0.45
Abstract

AlphaFold3-class structure predictors pair a representational trunk, which processes sequence and context, with a diffusion module, which generates atomic coordinates. How biological information changes as it crosses this architectural boundary remains poorly understood. We analyze per-residue activations from the Pairformer trunk and diffusion module of Boltz-1 using linear probes, sparse autoencoders (SAEs), and causal interventions. From the trunk, both geometry (secondary structure, disorder) and sequence chemistry (amino-acid identity, signal peptides, disulfide-bond annotations) are linearly decodable. In the diffusion module, the two diverge. Secondary structure transfers essentially unchanged, whereas sequence chemistry is strongly attenuated. We then test whether decodable directions can steer the model, intervening on the final trunk single representation that conditions the diffusion module. Helix and coil directions change predicted structure dose-dependently against matched-norm random controls, but a beta-strand direction that is highly predictive (F1 =0.82) produces no measurable increase in strand content: linear decodability does not imply causal influence at the site we tested. The same probes also score markedly lower against sparse SwissProt annotations than against dense DSSP labels, because unannotated residues that the model gets right are charged as false positives; such scores are therefore lower bounds. Finally, supervised probes outscore single SAE features wherever a label already exists. We release the trained trunk and diffusion SAEs, Boltz-1 per-residue activations, and the analysis code.

0.34

Multiple Myeloma Lesion Segmentation on Whole-Body Diffusion-Weighted Imaging via Efficient Anatomical Anticipation and Multimodal Confirmation

cs.CV cs.AI ·2026-09-05 ·Mengmeng Zhang, Shengqian Huang, Junde Zhou, Xiaoping Wu, Hao Luog +10 more
similarity 0.44
Abstract

Whole-body diffusion-weighted imaging (WB-DWI) is widely used for multiple myeloma (MM) assessment, yet automated lesion segmentation remains challenging due to limited anatomical delineation and the low specificity of marrow hyperintensity. Existing studies have introduced bone region-of-interest (ROI) information and apparent diffusion coefficient (ADC) maps to mitigate these ambiguities, but practical limitations remain. Bone ROI construction often relies on costly manual annotation, image registration, or dedicated bone models, while ADC is usually incorporated only through simple channel fusion, limiting its ability to provide complementary structural and lesion-discriminative cues. To address these limitations, we propose a two-stage framework for MM lesion segmentation on WB-DWI. In the first stage, we train a bone ROI generation model from ADC images without dedicated bone labels, providing an efficient and practical anatomical prior for lesion analysis. In the second stage, we propose Anatomy-guided Multimodal U-Net (AMU-Net), which leverages ADC in a manner consistent with clinical lesion assessment rather than treating it as a generic auxiliary modality. Extensive experiments demonstrate the effectiveness and practicality of the proposed method. It achieves the best overall performance among the evaluated methods, with a mean Dice score of 76.2%.

0.21