CS Paper Radar

Integer-Exact Microscaling: Running MXFP4 Language Models on INT8 Matrix Units

Shinyoung Kang, Junhyung Ahn, Yujun Kim, Jungho Park

cs.LG ·submitted 2026-10-31 00:18 UTC · v1
code/data

Abstract

On hardware whose fastest matrix datapath is INT8$\times$INT8, such as the Neural Accelerators of Apple's M5 GPUs, 4-bit weights must become INT8 operands. Existing MXFP4 kernels already map FP4 (E2M1) values to integers by doubling them, but apply every 32-element block scale inside the reduction. We show when no per-block work is needed: a row of MXFP4 weights is exactly one INT8 vector times one power-of-two scale if its block exponents span at most three, so a linear layer becomes a single INT8 GEMM with one rescale per output. Enforcing the condition adds at most 1/16 of a row's largest rounding error to the blocks it changes, and real weights already satisfy it: 97.9-99.97% of rows across seven models, including 99.93% of the 95M rows of a 125B-parameter mixture-of-experts (MoE) model, Qwen3.8-Flash-Next. The resulting spread-constrained MXFP4 files stay standard MXFP4. With integer instead of power-of-two block multipliers, an integer-exact format (16-wide blocks, multipliers 1..10, 4.26 bits) runs as one exact INT8 GEMM and is more accurate than NVFP4 (4.5 bits) with its standard scale rule on five small models, within 0.06 perplexity of NVFP4 with scale search. On Qwen3.8-Flash-Next's routed experts with INT8 activations it is as close to the FP8 model as NVFP4 with scale search (KL divergence 0.0557 vs. 0.0553) and closer than MLX's MXFP4 and affine INT4; with every matrix quantized it solves 94.8% of GSM8K vs. 91.0% for MLX's MXFP4. Quantizing only the 74k routed expert matrices (96% of the parameters) to either of our formats with INT8 activations costs at most 0.2% perplexity. A complete W4A8 system on the M5 produces outputs bit-identical to the quantized reference; prefill is 1.34-1.74x faster than MLX on a dense model, 1.10-1.57x on two MoE models up to 35B parameters and 1.22-1.29x on Qwen3.8-Flash-Next, where shared non-GEMM work bounds the gain.

Comment
22 pages, 3 figures, 13 tables. Code: https://github.com/shinyoungkang1/mxfp4-int8-m5

Closest papers

Nearest neighbours by meaning across the whole index.

Training an MoE LLM in MXFP4: How We Closed the Gap to BF16

cs.AI ·2026-10-23 ·Han Wang, Zhitao Wang, Natalia Frumkin, Xuanwu Yin, Alireza Khodamoradi +2 more
benchmarkcode/data similarity 0.68
Abstract

Training large language models (LLMs) in sub-8-bit arithmetic promises substantial gains in memory bandwidth and compute throughput, yet FP4 formats introduce quantization error severe enough to destabilize optimization if left unaddressed. We present ALTO, an open-source training recipe for GPT-OSS-20B, a 20-billion-parameter mixture-of-experts (MoE) model, on the MLPerf Small MoE Training benchmark under the MXFP4 microscaling format. The recipe combines established techniques from Abecassis, Felix et al. [arXiv:2509.25149] (hybrid 1D/2D block quantization, randomized Hadamard transforms, and stochastic rounding) with a simplified weight de-oscillation scheme adapted from TetraJet-v2 [arXiv:2510.27527]. On C4 validation at global batch size 16, MXFP4 + RHT + SR + de-oscillation reaches a validation loss of 3.3350 at 16,128 steps, only 0.007 above the BF16 baseline (3.3283), closing roughly 50% of the gap left by MXFP4 without de-oscillation (3.3418). Measured by steps to reach the MLPerf quality target (validation loss 3.34), de-oscillation cuts the FP4 convergence overhead relative to BF16 from +20.0% to +5.0%. We also report negative end-to-end results from differential gradient estimation, outlier clipping, and macro-block scaling, despite each showing operator-level SNR gains. All experiments use simulated MXFP4 kernels on AMD MI300X hardware and wall-clock speed has not been optimized.

0.26

AWE: Adaptive Weight Encoding for Exact Integer Matrix Products with Fewer GEMMs on FP4 Tensor Cores

cs.MS cs.ARmath.NA ·2026-09-21 ·Shun-ichiro Hayashi, Daichi Mukunoki, Tetsuya Hoshino, Takahiro Katagiri
similarity 0.68
Abstract

Emulation of high-accuracy floating-point matrix multiplication, as in the Ozaki scheme, splits the inputs into low-precision components and multiplies them pairwise. These products must be error-free, and each is an integer matrix product times a scale factor. FP4 Tensor Cores are the fastest on the NVIDIA B200 and B300 but cannot hold INT8 operands. The FP4 values scaled by 2 form the set $S = \{0, \pm1, \pm2, \pm3, \pm4, \pm6, \pm8, \pm12\}$, which contains every residue modulo 13, so with carries any integer splits into base-13 digits that FP4 can store. Prior work splits each INT8 operand into 3 such digits (limbs) with weights $(1, 13, 169)$ and multiplies them pairwise, 9 FP4 matrix multiplications (GEMMs) for INT8$\times$INT8. The classical ways to reduce products, such as the Karatsuba and Toom--Cook methods, do not apply as they stand: sums of limbs reach $\pm 24$ and leave $S$. This paper asks how many FP4 GEMMs are needed for one integer matrix product. We propose Adaptive Weight Encoding (AWE): the limbs take freely chosen integer weights, the stored planes are linear combinations of limbs, and the exact product is the sum of the FP4 GEMMs scaled by reconstruction coefficients. For each input range, we searched these choices for encodings with fewer products and found INT8$\times$INT8 in 6 products and INT4$\times$INT8 in 4. The formulation also holds modulo $m$, which covers the residue number systems of Ozaki scheme II: for the FP64 significand, the 75 products of prior work are reduced to 59. The boundary in product count between encodings with and without residues lies near input width 15. We release the encodings found.

0.41

Gradient-Guided Hardware-Native MIXFP4

cs.LG cs.AI ·2026-11-12 ·Jian-Jia Chen, Brian J. Chan, Wen-Hung Lee, Yi-Ting Li, Po-Shen Chen +6 more
code/data similarity 0.67
Abstract

Blackwell tensor cores support native inference with 4-bit weights and activations (W4A4), but NVFP4 leaves a perplexity (PPL) gap to BF16. Choosing a format for each 16-element block can improve accuracy, but current matrix multiply instructions cannot execute choices this fine. Applying these rules at hardware-compatible tiles loses most of their benefit. We introduce FlipQuant, which selects E2M1 or E0M3 for each MMA weight tile. It keeps both quantized weight candidates fixed and learns a binary format map from end-to-end gradients of a bucketed KL loss to a BF16 teacher, re-evaluating them after each update. Native kernels execute 16 x 64 tiles on SM120 and 256 x 64 tiles on SM100 with median GEMM overheads of 1.9% and 1.7%, respectively. Across six language models and two corpora, FlipQuant at 16 x 64 closes 42.5% of NVFP4's PPL gap to BF16 on average, compared with 13.3% for FourOverSix. Code is available at https://github.com/brian030128/flipquant.

0.37

UE5M3 FP4 Block Scaling for Stable Language Model Pretraining

cs.LG ·2026-09-02 ·Robert Hu, Carlo Luschi, Paul Balanca
similarity 0.66
Abstract

Stable 4-bit floating-point (FP4) pretraining is difficult because the E2M1 payload represents only a narrow range of magnitudes. NVIDIA's Transformer Engine \nv{} recipe addresses this with current-tensor scaling, a randomized Hadamard transform (RHT), and bfloat16 (BF16) final layers, adding work outside the FP4 matrix multiplications. We instead pair E2M1 payloads with unsigned E5M3 (\ue{}) block scales. Their wider range permits periodic tensor scaling, while our recipe applies selective stochastic rounding to backward gradients, omits RHT, and uses FP4 in all eligible internal linears. We pretrain a Nemotron-H 8B model for nearly 190 billion tokens. Compared with Transformer Engine \nv{}, the proposed block-16 recipe finishes with lower final-window training loss and, under their respective quantized-inference policies, lower validation loss measured as held-out negative log-likelihood. Its quantized-inference downstream point estimates are also higher on all three reported aggregates. A native \nv{} execution ablation that jointly removes RHT and the BF16 final-block exemption increases measured model-body token throughput by 21.2\%. These results demonstrate end-to-end software-emulated \uefp{} pretraining with a simpler recipe and motivate native support for \ue{} block scaling.

0.45

SoScale: Second-Order Scale Search for FP4 Quantization

cs.LG cs.AI ·2026-11-12 ·Pengxiang Zhao, Xing Li, Hui-Ling Zhen, Weizhe Lin, Xianzhi Yu +1 more
similarity 0.65
Abstract

Low-bit quantization reduces the memory footprint and inference cost of large language models (LLMs), yet accurate FP4 quantization remains challenging. Practical formats such as MXFP4, NVFP4, and HiF4 pair a 4-bit floating-point payload with block-wise or hierarchical scale codes, making accuracy highly sensitive to how each local distribution is scaled. Default maximum-absolute-value scaling preserves dynamic range, but can spend scarce FP4 levels on rarely occupied outlier regions and leave dense tensor values poorly resolved. Existing scale-search methods minimize local element-wise reconstruction error, optimizing tensor fidelity rather than layer-output fidelity. We propose SoScale, a second-order weight scale-code search method for hierarchical FP4 quantization. SoScale searches hardware-valid scale codes under a Hessian-aware layer reconstruction objective and couples this search with GPTQ-style error recovery, selecting scales by their impact on layer outputs. Across Qwen3 models, SoScale consistently reduces downstream quantization degradation under MXFP4, NVFP4, and HiF4.

0.05

Deciding Scale Placement in MXFP4 Dot Products with Integer Arithmetic

cs.LO cs.ARcs.PL ·2026-10-21 ·Shreyas Vinayakumar
theory similarity 0.65
Abstract · 24 pages including references and two appendices, 1 figure, 5 tables

The Open Compute Project's microscaling (MX) family includes MXFP4, which stores 32 four-bit elements with a shared power-of-two scale. When lowering a dot-product reduction, a compiler can apply these scales before the reduction, or defer scaling until afterwards. Although equivalent over real numbers, these formulations can produce different IEEE binary32 results through overflow or underflow, with equivalence also depending on the reduction tree. We study the legality of compiler rewrites in either direction by deriving conditions under which the two formulations are bitwise equivalent. To decide rewrite legality, we construct an integer state machine that exploits the finite element alphabet and shared power-of-two scales, modeling overflow, NaN, and subnormal rounding. We prove its faithfulness under bounded scale codes and integer coefficients, yielding an exact encoding of the equivalence query in quantifier-free linear integer arithmetic (QF_LIA). For MXFP4, we derive a closed-form sufficient upper bound on the sum of scale exponents for any fixed binary reduction tree within the supported coefficient range. This bound depends on the size of the largest proper subtree. For four tree shapes at block lengths $k\in\{2,3,4,8,16,32\}$ and two shapes at $k=64$, SMT finds counterexamples when this upper bound is increased by one exponent step. Against the standard direct encoding in quantifier-free floating-point arithmetic (QF_FP), on matched queries cvc5 proves the integer version in seconds but reaches a configured one-CPU-hour limit on the floating-point proof even at $k=2$. The implementation was cross-checked using an independent floating-point encoding, exhaustive and stratified binary32 execution, and GPU replay of counterexamples. An MLIR lowering prototype demonstrates selection between the two formulations using the certified conditions as static or runtime guards.

0.24

CertiSum: Bitwise-Identical MXFP4 Training Across Platforms and Parallelism Layouts

cs.LG cs.DC ·2026-11-16 ·Steve Rhyner, Yubo Gao, Stefan de Lasa, Sankeerth Durvasula, Nandita Vijaykumar
similarity 0.63
Abstract

Training with MXFP4, a 4-bit microscaling format, is non-deterministic: identical inputs can produce different results across parallelism layouts and GPU vendors. These differences complicate debugging and training audits and can cause training and inference engines to disagree. We present CertiSum to make MXFP4 training bitwise invariant across runs, parallelism layouts, and GPU vendors. Its key insight is that native FP32 accumulation of MXFP4 products is often already exact for every summation order. CertiSum collects statistics during quantization to certify native matrix multiplication results, recomputes uncertified outputs exactly, and uses exact kernels directly where certification rarely succeeds. CertiSum keeps quantization blocks unchanged across layouts and merges partial sums without rounding, including in attention and weight-gradient computation. In 200-step Qwen3-8B-Base experiments, CertiSum preserves training states bit for bit across AMD MI350X and NVIDIA GB200 and across changes in data, tensor, and context parallelism on MI350X. Across three 8B--14B models on FineWeb-Edu using MI350X, it adds 11.8--60.5% to training-step latency relative to its non-exact MXFP4 counterpart at the larger evaluated input shapes, with speedups of up to $1.24\times$ over BF16 and $1.70\times$ over deterministic BF16.

0.12

Replay the Curvature: Accurate and Scalable NVFP4 Quantization for Large Language Model Inference

cs.LG cs.CLcs.DC ·2026-09-29 ·Ruiyi Ding, Jie Li, Kang He, Ziyan Liu, Chengru Song +2 more
similarity 0.63
Abstract · 33 pages

Large language models make weight storage and memory traffic major inference costs, motivating low-precision formats that represent each weight with only a few bits. Such formats use a scale to map floating-point values into a small codebook; NVFP4 improves local range utilization by letting every 16 E2M1 weights share an E4M3 block scale. Choosing that scale is difficult in GPTQ because quantizing one column updates those that follow, so evaluating a block independently can misestimate its final reconstruction error. Large models pose a second challenge: full-precision weights, calibration activations, and second-order state cannot all remain on one accelerator, while assigning complete layers to devices leaves each time-consuming layer solve serial. We introduce \emph{Schur Replay}, a scale-selection algorithm that reproduces the GPTQ updates caused by each block scale and scores the resulting block error after accounting for compensation from unquantized columns. Separately, our execution infrastructure keeps only the active layer resident, tiers activations across device, host, and disk, retires full-precision layers after export, and distributes independent output rows across tensor-parallel ranks. Together, the algorithm and infrastructure attain $99.35\%$ and $100.84\%$ question-weighted recovery from BF16 across seven benchmarks on Qwen3.5-397B-A17B and Llama-3.3-70B-Instruct. On the 397B model, the infrastructure reduces measured per-layer time by $15.17\times$ over ModelOpt and $23.14\times$ over LLM Compressor, with lower memory used per GPU.

0.15