CS Paper Radar

MESSPa: A Multi-modal Embodiment Stimulation Shoulder Pad for Preserving the Sense of Agency in a Detachable Robotic Arm

Vitvasin Vimolmongkolporn, Guillaume Gourmelen, Yukiko Iwasaki, Hiroyasu Iwata

cs.RO cs.HC ·submitted 2026-10-31 00:59 UTC · v1
published

Abstract

Wearable robots such as supernumerary robotic limbs (SRLs) can augment human capability, but their effectiveness depends strongly on the operator's sense of embodiment, comprising the sense of agency (SoA) and the sense of ownership (SoO). When an SRL is detached from the body so that the operator can act in two places at once, both the sense of agency and task performance tend to degrade. This paper presents the Multi-modal Embodiment Stimulation Shoulder Pad (MESSPa), a wearable interface that combines one-to-one motion transfer with spatially distributed pneumatic (balloon) haptic feedback on the shoulder, with the goal of preserving the sense of agency across attached and detached states. We describe the system design, the control mapping, and a controlled experiment using a $2\times2$ mixed design that crosses the control interface between groups (MESSPa, $N=13$, vs. keyboard control, $N=12$ from our previous study) and attachment (on-shoulder/detached) within participants, under single- and dual-task loads. Compared with keyboard control in the detached condition, MESSPa significantly reduced task completion time and significantly improved the sense of agency in the detached state, while narrowing the performance gap between the attached and detached conditions. The sense of ownership did not change significantly. These results indicate that combining motion transfer with positional haptic feedback is an effective way to recover agency when a robotic limb is operated remotely.

Comment
8 pages, 8 figures. Accepted to the 2026 IEEE-RAS International Conference on Humanoid Robots (Humanoids 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

Intuitive Hand Positional Guidance Using McKibben-Based Surface Tactile Sensations to Shoulder and Elbow

cs.HC cs.RO ·2026-08-10 ·Kenta Yokoe, Yuki Funabora, Tadayoshi Aoyama
top venuehighly cited similarity 0.63
Abstract · This is the accepted version of an article published in IEEE Robotics and Automation Letters 10(4), 3254-3261 (2025). DOI: 10.1109/LRA.2025.…

Hand positional guidance with intuitive perception is crucial for enhancing user interaction and task performance in immersive environments. However, conventional hand positional guidance methods, relying on tactile sensations, lack intuitiveness. Consequently, users require instruction on the relationship between the tactile sensation and target position of the guidance before using these methods. Additionally, the user needs training to become familiar with tactile sensations. This study presents a hand positional guidance system with intuitive perception that leverages McKibben-based surface tactile sensations directed to the shoulder and elbow. We developed a wearable fabric actuator that provides McKibben-based surface tactile sensations to induce six specific movements: elbow flexion, extension, shoulder abduction, adduction, horizontal abduction, and horizontal adduction. The effectiveness of the actuator was experimentally validated, demonstrating its high accuracy in intuitively inducing six movements. An algorithm based on the equilibrium point hypothesis and Weber-Fechner law was implemented to regulate the intensity of the tactile sensations for hand positional guidance. Furthermore, the accuracy and speed of the proposed system were compared with that of conventional guidance methods utilizing synthesized speech and vibrotactile guidance.

0.78

RoboSpan: Learning Modular Coordination Policies for High-DoF Whole-Body Mobile Manipulation with Teleoperation

cs.RO ·2026-10-14 ·Keqiang Ren, Xuecheng Ye, Hanyu Liu, Zhihua Wang, Tao Jian +4 more
similarity 0.62
Abstract

Whole-body mobile manipulation suffers from two fundamental challenges: inherent motion heterogeneity across locomotion, arm, and hand modules, and progressive error accumulation over long-horizon multi-stage tasks. Existing teleoperation platforms also lack integrated dexterous tactile sensing to support coordinated whole-body decision-making. This paper presents RoboSpan, a high-DoF whole-body teleoperation and demonstration platform, and the Hierarchical Modular Framework (HMF) for learning modular coordination policies. HMF functionally decouples the 29-DoF action space into fine hand manipulation, arm pose adjustment, and mobile-base spatial configuration branches, and introduces the Coordinated Modular Embodied Transformer (COMET) with inter-modular cross-attention to enable dynamic information exchange and action coordination. Vision-language model driven hierarchical task decomposition structurally suppresses temporal error propagation, while a full-palm 2D tactile representation encodes distributed contact signals for cross-module tactile empowerment. Experiments on a physical 29-DoF robot demonstrate that the proposed method achieves over 20\% higher task success rate than mainstream baselines across a range of long-horizon whole-body tasks, markedly improving stability and robustness in contact-rich manipulation.

0.16

M3-Tele: A Unified Multimodal Teleoperational Framework for Compliant Whole-Body Mobile Manipulation

cs.RO ·2026-09-07 ·Hengxiang Chen, Shenwen Deng, Yujian Ma, Gan Ma, Qiang Li +1 more
similarity 0.62
Abstract · 15 pages,12 figures,a under-review journal

Executing contact-rich tasks efficiently requires the seamless integration of whole-body coordination and physical compliance regulation. However, existing teleoperation and data-collection frameworks often overlook the joint consideration of multimodal perception and coordinated whole-body operation. This limitation can reduce the efficiency and quality of demonstration collection, thereby affecting the effectiveness of downstream policy learning. In this work, we present \textbf{M3-Tele}: A Unified \underline{M}ultimodal \underline{Tele}operational Framework for Compliant Whole-Body \underline{M}obile \underline{M}anipulation, enabling stable physical interaction and capturing aligned visual, tactile, force, and proprioceptive observations during task execution. Extensive experiments demonstrate that the proposed framework significantly improves contact-rich teleoperation performance. The proposed controller reduces the force tracking error from 4.132~N to 0.346~N, the contact loss from 2.46 to 0.02 events per trial and the tactile deformation error by 65\%. User studies across four mobile manipulation tasks also verify the reliability and usability of the proposed system. Furthermore, Diffusion Policy experiments highlight the value of joint tactile and force sensing.

0.22

From Wearable Interfaces to Dexterous Policies: Contact Shifts and Tactile Representations

cs.RO ·2026-10-06 ·Ruitong Tian, Fang Xu, Noah B. Wilson, Xianyao Li, Eric Jing Du
similarity 0.62
Abstract · 8 pages, 6 figures

Unlike conventional teleoperation, wearable interfaces allow operators to collect dexterous demonstrations through their own hand motions while directly interacting with task objects. This direct interaction reduces dependence on the target robot during collection, but it also makes the collection hardware part of the physical process that generates each demonstration. Interface geometry can influence both how a task is performed and what tactile observations are recorded for learning. We study two versions of a DexUMI-family exoskeleton that share the same robot command definition, mapping procedure, and tactile module type but differ in hand-side geometry. The revised interface reduces reported physical demand, improves selected device ratings, enables tactile access in a precision grasp that is mechanically blocked by the baseline, and produces task-dependent changes in recorded contact. Lid twisting primarily exhibits a change in contact location, whereas egg carton opening primarily exhibits a change in contact occurrence. We then train matched policies using either a binary aggregate input or a spatial-plus-force input. On lid twisting and egg carton opening, policies trained on revised-interface demonstrations achieve higher success than those trained on baseline demonstrations, with a significant pooled interface effect. Across these and two additional tasks, USB insertion and soldering tool pick and place, the spatial-plus-force input likewise outperforms binary aggregation. These results show that wearable collection hardware is part of the data-generation process for robot learning. Such interfaces should therefore be evaluated not only through operator experience, but also through the tactile interactions they make recordable and the policy performance their demonstrations support.

0.19

Elbow Angle Guidance System Based on Surface Haptic Sensations Elicited by Lightweight Wearable Fabric Actuator

cs.HC cs.RO ·2026-08-11 ·Kenta Yokoe, Tadayoshi Aoyama, Yuki Funabora, Masaru Takeuchi, Yasuhisa Hasegawa
published similarity 0.61
Abstract · This is the accepted version of the paper published in Proc. 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), …

The demand for wearable haptic devices has rapidly increased for various applications. However, many haptic devices interfere with the wearer's activities and movements. In addition, several haptic devices fail to elicit intuitive haptic sensations by adjusting to the natural posture of the wearer. To address these issues, we propose an elbow angle guidance system using a lightweight wearable fabric actuator. The proposed actuator is made of fabric and has two McKibben-type artificial muscles attached to it, rendering it extremely lightweight and facilitating the delivery of surface haptic sensations to intuitively induce elbow extension and flexion. The surface haptic sensation elicited by the fabric actuator is adjusted to natural body movements without interfering with the wearer's movements. Moreover, the proposed system measures and guides the elbow angle by changing the intensity of the surface haptic sensation delivered to users in real time. The accuracy of the proposed system is demonstrated through experiments involving human participants.

0.65

Surgical Master Console Using General-Purpose Robot Arms and a Separable Articulated Distal Interface: Porcine In-Vivo Evaluation

cs.RO ·2026-09-27 ·Minsung Kim, Seonho Shim, Dongho Yee, Younghoon Noh, Juahn Oh +7 more
similarity 0.60
Abstract · Submitted to IEEE ICRA 2027

High-performance surgical master consoles offer intuitive articulated manipulation but are expensive and difficult to reproduce, while accessible commercial haptic devices lack built-in interfaces for surgical wrist articulation and continuous grasp. We present a laparoscopic master in which general-purpose robot manipulators provide the programmable base and surgical-specific interaction is concentrated in a separable distal adapter. Each 6-DoF arm carries a custom 2-DoF direct-drive wrist, continuous grasp sensing, and clutch-based workspace management; the complete bimanual hardware costs approximately US$5,500, below common bimanual commercial haptic references. To support sustained hand-guided use, we characterize current scaling, gravity, and break-away friction and use them for posture-dependent gravity compensation and motion-gated assistance, reducing continuous actuation and thermal loading. A common master state drives either Isaac Sim or an RCM-constrained dual-FR3 platform. Master-state publication to FR3 target update adds at most 8 ms, and tip tracking shows 0.31-0.66 mm mean delay-aligned residuals. In a porcine cholecystectomy experiment, five common operator-side metrics and hand/tip-speed distributions were compared descriptively with human in-vivo telemetry from 120 clinical Versius recordings of 99 cholecystectomy procedures; no interruption originated from the master console, and no abnormal clinical signs were recorded during the 7-day postoperative observation period. These results demonstrate a surgical master built from general-purpose robot arms with surgical-specific interaction concentrated in a separable distal interface.

0.32

GIFT: Glove-Inferred Force Transfer: Force-Aware Human-to-Robot Skill Transfer from a Wearable Sensing Glove to a Robot Hand Without Tactile Sensors

cs.RO ·2026-09-12 ·Tzach Sarusi
code/data similarity 0.60
Abstract · 7 pages, 5 figures, 1 table. Project page: https://tzahsarusi.github.io

Human-to-robot skill transfer from sensing gloves has so far relied on shared hardware: the same tactile glove worn by the demonstrator and the robot, or a learned alignment between two tactile sensors. We present GIFT (Glove-Inferred Force Transfer), a pipeline in which the interface between human and robot is a physical unit rather than a shared sensor: fingertip force is measured in newtons on the human side and estimated in newtons on the robot side. A wearable glove records finger flexion, calibrated fingertip force, and wrist orientation, while a head-mounted camera records the demonstration; no robot is present. At deployment, the robot estimates force from actuator-current residuals relative to a free-space baseline, through a calibrated mapping to newtons, so any position-controlled hand that reports motor current can serve as the deployment platform. The policy uses a glove-space state and predicts finger-position targets; the robot enters only through two calibrated adapters, a retargeting decoder and a force estimator. We evaluate GIFT on a cup grasp-and-hold task with two action-chunking policies trained on the same demonstrations, with fingertip-force inputs retained in one and zeroed in the other. In a 50-rollout evaluation with sample size and metrics fixed before scoring, both policies succeeded in all 25 rollouts. The median of the per-rollout hold-phase grip-force estimates was 53% lower with force inputs: 1.20 N versus 2.55 N (one-sided Mann-Whitney U, p<0.0001). In an observation ablation, a vision-only policy achieved 0/15 grasps, policies given hand-command state acquired the grasp, and the force inputs determined how hard the policy held. A force channel measured on the human hand thus transfers to a robot hand with no tactile hardware, through a retargeting map from five glove channels to seven robot actuators, with no sensor shared between the two.

0.32

MiBOT: A head-worn robot that modulates cardiovascular responses through human-like soft massage

cs.RO eess.SY ·2026-08-30 ·Alice Mylaeus, Stephanie Vogt, Berken Utku Demirel, Marcel Gort, Mirko Meboldt +2 more
top venue similarity 0.59
Abstract · Published at 2024 IEEE International Conference on Robotics and Automation (ICRA)

Massage therapy is helpful for the rehabilitation of various diseases, such as headaches caused by migraines and stress. Existing robotic systems have focused on massage therapy on the torso and limbs, but performing massage motions through suitable actuation on a person's head has been a challenge. In this paper, we present MiBOT, a head-worn massage robot that actuates two soft tactors to produce touch motions mimicking human massage. A key design principle behind MiBOT is its silent actuation, which we achieve through pneumatic artificial muscles in conjunction with a controller loop to respond to contact pressure. We evaluated the effectiveness of MiBOT in a controlled study and assessed subjects' blood pressure and heart rate levels while applying MiBOT. We found that our mechanical system generated positive and conclusive quantitative outcomes that are similar to the human-administered massage, decreasing participants' mean systolic and diastolic blood pressure by 2.8 mmHg and 1.7 mmHg, respectively, as well as calming their heart rate by 8-10% on average.

0.41