CS Paper Radar

Device Identification and Motion Classification of Passive Nonlinear RF Transponders Using Wi-Fi Channel State Information

Cory Hilton, Jeffrey A. Nanzer

eess.SP ·submitted 2026-10-31 20:36 UTC · v1

Abstract

A method of joint device authentication and gesture classification using low-cost passive transponders and 802.11 signals of opportunity from commodity hardware is presented for tracking objects in cluttered environments. The approach detects nonlinear responses of diode-based radio-frequency (RF) transponders by estimating the mean time-varying phase across all subcarrier channel state information (CSI) obtained from standard preambles. These unique responses are enabled by passive transponders utilizing 2.4 GHz meander-line monopole antennas with capacitive top-hat loading and a low-barrier Schottky diode, allowing for low-power omnidirectional sensing and complex gesture recognition across multiple unique devices. The capture system uses a wireless access point to illuminate the transponder with a standard preamble. This signal is modulated by the diode's nonlinear response and transmitted to a single ESP32 receiver to calculate the channel response. Using the modulated CSI, device identification via RF fingerprinting achieves >95% accuracy in both static and dynamic conditions using simple machine learning models. For dynamically moving transponders, a time-varying velocity profile is calculated using a novel phase sanitation approach that significantly reduces the impacts of the non-cooperative network. This enables high-accuracy estimation of micro-motions on a single receiver, achieving a theoretical limit of 9.75 m/s using an amplitude-invariant binary comparator form of the sanitized waveform. The concept is experimentally validated using lightweight CNN-LSTM deep-learning models applied to a diverse dataset of five transponders and three motion profiles. This experimental validation demonstrated a classification accuracy of 98% in both gesture classification and device identification tasks.

Closest papers

Nearest neighbours by meaning across the whole index.

A Proof-of-Concept Study of Wi-Fi Channel State Information-Based Fall Detection Using ESP32 Devices

eess.SP ·2026-11-11 ·Amritha S. S., Anhajul S. Rahman, Mohammed Bin Saleem, Vaishnav Sankar, Jerrin Thomas Panachakel
similarity 0.58
Abstract

This paper reports a small-scale proof-of-concept study of contactless fall detection using Wi-Fi channel state information (CSI) collected with two ESP32 devices. One device acts as the transmitter and the other as the receiver, with a separation of 3.5~m. The evaluated signal-processing pipeline uses CSI amplitude, second-level discrete wavelet transform (DWT) denoising with a Symlet-10 wavelet, z-score normalization, and fixed-length segmentation. Wavelet-scattering coefficients are used as features, and MATLAB's automated classifier-selection workflow identifies a LogitBoost ensemble with a minimum leaf size of four and a learning rate of 0.022052. The proposed classifier achieved an accuracy of 93.10%, with a precision of 100%, recall of 87.50%, and F1-score of 93.33%. These results demonstrate the potential of Wi-Fi CSI-based sensing for contactless fall detection using low-cost ESP32 hardware.

0.21

5G Sensing for Human Pose Estimation with PRS-based CSI: An Experimental Demonstration

eess.SP ·2026-10-27 ·Zhaorui Yin, Pietro Morri, Mattia Brambilla, Monica Nicoli
similarity 0.56
Abstract

This paper presents an experimental study of device- free 2D human pose estimation using Channel State Information (CSI) extracted from downlink Fifth Generation (5G) Positioning Reference Signal (PRS). The proposed system employs a Next Generation Node Base (gNB) transmitting PRS to a User Equipment (UE) equipped with two receive antennas to measure the radio channel. The CSI is estimated using a least-squares (LS) method, and processed through amplitude smoothing and phase calibration. The resulting amplitude and phase representations are used as inputs to a deep learning model for pose estimation. We compare amplitude-only input with joint amplitude-phase training at a bandwidth of 20 MHz. The joint training outperforms the amplitude-only solution and achieves Percentage of Correct Keypoints (PCK) equal to 32.2%, 72.9%, and 84.2% below 10%, 30%, and 50% of the distance between left shoulder and right hip, respectively. These results demonstrate that standardized downlink 5G PRS-based CSI contains useful information for human pose estimation, even with a simple radio configuration and a relatively small dataset.

0.30

Through-Wall Detection using Software-Defined Radio based on adaptive Principal Component Analysis

eess.SP ·2026-09-11 ·Dinuli Naotunna, Wenchao Li, Sanka Piyaratna, Phil Wandel
similarity 0.56
Abstract · 15 pages, 7 figures

Through-Wall Detection (TWD) using opportunistic WiFi signals enables non-invasive sensing for security and rescue applications; however many existing approaches rely on controlled access points or specialised hardware. This paper presents a TWD system that extracts Channel State Information (CSI) from ambient WiFi packets using a customised software-defined radio (SDR), Bluebottle, without requiring transmitter control. The key contribution is a spectral-domain scoring mechanism for adaptively selecting motion-relevant principal components from a Principal Component Analysis (PCA) decomposition of the CSI, using Welch power spectral density estimates to quantify each component's signal-to-noise ratio and spectral concentration within the frequency band associated with human motion. The selected components are then analysed using a continuous wavelet transform to robustly identify time-localised motion events. Experimental results demonstrate that the proposed adaptive component-selection method consistently reduces false detections and produces sharper time-frequency energy ridges compared to conventional fixed-component PCA.

0.26

Trajectory-Guided Tokenization of Complex CSI for Wi-Fi Sensing

cs.LG ·2026-10-05 ·Ziyi Wang, Kenuo Xu, Jichu Jiang, Yumeng Yang, Zheng Chen +6 more
similarity 0.56
Abstract

Wi-Fi channel state information (CSI) enables contactless presence detection and gesture recognition. Its high-dimensional complex-valued time series require input representations that preserve informative temporal variations during compression. We propose Trajectory-Guided Tokenization (TGT), which combines complex trajectory decomposition with asymmetric attention to construct compact continuous tokens. For each antenna link and subcarrier, an orthonormal Helmert transform decomposes short, ordered temporal patches into local-center and centered-trajectory coordinates. Keys are learned from the centered-trajectory coordinates, while values retain both components. Learnable queries aggregate subcarriers into frequency slots, which are fused into temporal tokens. Trained jointly from scratch, TGT with TokenMLP achieves the highest mean accuracy of 92.83% among all evaluated frontend-backend combinations on the self-collected dataset. Experiments on EHUNAM and Widar further support the applicability of TGT to cross-domain presence detection and gesture recognition.

0.32

Entropy-Based Wireless Technology Recognition

eess.SP ·2026-10-16 ·Mohammad Alhellani, Eli De Poorter, Mamoun Guenach, Adnan Shahid
similarity 0.55
Abstract

Wireless Technology Recognition (WTR) enables identifying wireless technologies from received radio signals and is important for spectrum monitoring and management systems. Existing approaches either rely on handcrafted signal features with limited robustness or computationally intensive Deep Learning (DL) models operating on high-dimensional In-phase and Quadrature (IQ) samples or spectrograms. In this paper, we investigate a different hypothesis: wireless technologies can be distinguished through the temporal evolution of their local time-frequency complexity. To capture this behavior, we propose a lightweight WTR framework based on two-dimensional dispersion entropy. Entropy values are extracted from successive spectrogram regions to characterize the evolution of local spectrogram complexity throughout a transmission and summarized into a compact feature representation for classification using a Multilayer Perceptron (MLP). The framework is evaluated on seven wireless technologies, namely IEEE 802.11ah, IEEE 802.15.4 SUN-FSK, IEEE 802.15.4 SUN-OFDM, LoRa, IEEE 802.11n, LTE, and 5G NR, at Signal-to-Noise Ratios (SNRs) ranging from -20 dB to 40 dB. Experimental results show that the proposed approach consistently outperforms IQ-based and Short-Time Fourier Transform (STFT)-based Convolutional Neural Network (CNN) baselines, particularly at low and moderate SNRs. Averaged across all evaluated SNR levels, it achieves 82.73% accuracy, corresponding to improvements of 23.8% and 14.6% over the IQ-based and STFT-based CNN approaches, respectively. Furthermore, the approach maintains its recognition advantage with data-augmented training while requiring substantially shorter training times. The results demonstrate that temporal evolution of local spectrogram complexity provides a robust technology-specific fingerprint and an effective, computationally efficient representation for WTR.

0.21

Human Mobility Sensing Using Wall-Reflected Beamformed Millimeter-Wave Communication Signals

eess.SY ·2026-11-04 ·Tony DiMichele, Raees Matheen Mullah, Christian Lopez Garcia, Zahra Najafi, Mohammed E. Eltayeb
similarity 0.55
Abstract

Existing millimeter-wave (mmWave) communication beam patterns spatially weight human-scattered signals and shape the received-power signatures induced by human motion. We exploit these beam-shaped signatures for device-free walkingpace and walk-direction classification using a wall-reflected 60.8-GHz link with closely spaced phased arrays and fixed communication beamforming vectors. Human movement alters the interference between wall-reflected and scattered signals, producing power oscillations surrounding a central blockage fade. A beam-dependent interference model provides a physical interpretation of these signatures. Using received-power statistics from a continuous-tone experiment, we extract fade duration for walking-pace classification and pre/post-fade asymmetries for walk-direction classification. Measurements comprise 144 crossings from three participants along perpendicular and diagonal trajectories. Under leave-one-participant-out validation, logistic regression achieves 86.1% binary and 79.2% three-class walking pace accuracy, and 77.1% travel-direction accuracy. The results demonstrate mobility sensing using fixed communication beams without channel estimation, Doppler processing, or dedicated radar hardware

0.27

Untangling the Geometry and Speed for RF Sensing Spectrograms

eess.SP cs.LG ·2026-09-22 ·Mert Torun, Darius Cuenca, Yasamin Mostofi
similarity 0.52
Abstract

A fundamental challenge in RF sensing is that Doppler signatures observed by a link entangle the target's motion with the sensing geometry, resulting in limited applicability to unconstrained real-world settings. In this paper, we establish a new foundation for physically interpretable RF sensing that disentangles reflector speed from geometry, jointly recovering the speed, geometry factor, relative amplitude, and width of each dominant Doppler ridge. More specifically, we first develop a compact parametric representation of WiFi spectrograms and establish its low-dimensional structure through a systematic computer-vision analysis of a large and diverse human-activity dataset, thereby providing a tractable foundation for learning. Building on this representation, we then design a physics-informed autoencoder whose structured bottleneck and differentiable RF forward model enforce physically meaningful estimates of reflector speed and geometry. We further introduce a synthetic-to-real training framework, eliminating the need for real WiFi training data. We extensively validate the proposed framework under both known and time-varying geometries, using both independently generated synthetic test sets and 31 real WiFi experiments. The results demonstrate the superior performance in speed and geometry extraction, robustly recovering the underlying geometry, speeds, Doppler-ridge amplitudes, and ridge widths across all settings, while substantially outperforming the strongest baselines.

0.10

From Activity Recognition to Shift Detection: Variational Wi-Fi Sensing with Evidential Uncertainty

cs.LG ·2026-11-18 ·Luca Cotti, Marco Cominelli, Francesco Gringoli, Lance M. Kaplan, Mani B. Srivastava +5 more
benchmark similarity 0.52
Abstract · 17 pages,8 figures, 8 tables

Human motion perturbs wireless channels, making commodity Wi-Fi devices a practical platform for device-free activity recognition. Yet Channel State Information (CSI) also depends strongly on the person, receiver position, recording session, and surrounding environment, so a classifier can continue producing activity labels after its deployment conditions have moved away from those seen during training. We propose Wi-HAR, a multi-antenna architecture in which four Variational Auto-Encoders learn compact distributions from raw Wi-Fi 6 CSI magnitudes and a delayed-fusion classifier combines their means and log-variances. On twelve activities from a public benchmark, Wi-HAR reaches 96.6% median recognition accuracy, compared with 70.8-81.5% for independently optimized single-antenna models, showing that the antennas provide complementary views of the same activity. We then use the same latent backbone to detect deployment shifts without using shifted samples for model selection or calibration. A class-conditional uncertainty score derived from Evidential Deep Learning achieves a macro-average ROC-AUC of 0.897 across eleven datasets that change receiver position, participant, recording session, or room, and detects 82.5% of shifted samples at a realized 5.2% in-distribution rejection rate. Detection performance nevertheless varies substantially across receiver positions, showing that the same physical change does not induce a uniform uncertainty response. The compact representation also supports shallow decision-tree analysis using variables from several antennas.

0.26