CS Paper Radar

Through-Wall Detection using Software-Defined Radio based on adaptive Principal Component Analysis

Dinuli Naotunna, Wenchao Li, Sanka Piyaratna, Phil Wandel

eess.SP ·submitted 2026-09-11 05:05 UTC · v1

Abstract

Through-Wall Detection (TWD) using opportunistic WiFi signals enables non-invasive sensing for security and rescue applications; however many existing approaches rely on controlled access points or specialised hardware. This paper presents a TWD system that extracts Channel State Information (CSI) from ambient WiFi packets using a customised software-defined radio (SDR), Bluebottle, without requiring transmitter control. The key contribution is a spectral-domain scoring mechanism for adaptively selecting motion-relevant principal components from a Principal Component Analysis (PCA) decomposition of the CSI, using Welch power spectral density estimates to quantify each component's signal-to-noise ratio and spectral concentration within the frequency band associated with human motion. The selected components are then analysed using a continuous wavelet transform to robustly identify time-localised motion events. Experimental results demonstrate that the proposed adaptive component-selection method consistently reduces false detections and produces sharper time-frequency energy ridges compared to conventional fixed-component PCA.

Comment
15 pages, 7 figures

Closest papers

Nearest neighbours by meaning across the whole index.

A Proof-of-Concept Study of Wi-Fi Channel State Information-Based Fall Detection Using ESP32 Devices

eess.SP ·2026-11-11 ·Amritha S. S., Anhajul S. Rahman, Mohammed Bin Saleem, Vaishnav Sankar, Jerrin Thomas Panachakel
similarity 0.61
Abstract

This paper reports a small-scale proof-of-concept study of contactless fall detection using Wi-Fi channel state information (CSI) collected with two ESP32 devices. One device acts as the transmitter and the other as the receiver, with a separation of 3.5~m. The evaluated signal-processing pipeline uses CSI amplitude, second-level discrete wavelet transform (DWT) denoising with a Symlet-10 wavelet, z-score normalization, and fixed-length segmentation. Wavelet-scattering coefficients are used as features, and MATLAB's automated classifier-selection workflow identifies a LogitBoost ensemble with a minimum leaf size of four and a learning rate of 0.022052. The proposed classifier achieved an accuracy of 93.10%, with a precision of 100%, recall of 87.50%, and F1-score of 93.33%. These results demonstrate the potential of Wi-Fi CSI-based sensing for contactless fall detection using low-cost ESP32 hardware.

0.21

Cross-Domain Inference for Human Localization: Applying Wi-Fi RSSI Data to CSI-Trained Models

cs.CR cs.LGcs.NI ·2026-09-15 ·Ariel Duschanek-Myers, Thomas Welsh, Helmut Neukirchen
top venue similarity 0.59
Abstract

Wi-Fi signal data can be used to compromise the privacy of individuals. While many existing approaches rely on Channel State Information (CSI), collecting this data on typical IoT devices often requires elevated operating system permissions and specialized drivers. Consequently, this paper investigates the feasibility of utilizing Received Signal Strength Indicator (RSSI) data to predict human locations. RSSI was selected because it is accessible even on devices with limited user permissions, and therefore is more applicable to a wider array of IoT devices. To bypass the tedious process of obtaining training data needed to train an RSSI-based model, an existing Wi-Fi pose prediction project was used in this research. However, that project assumed CSI data as input. Therefore, we investigate the feasibility of cross-domain inference, i.e., feeding RSSI data into that existing CSI-based model. We collected an RSSI dataset, synchronized with video ground-truth of a person moving within a room, to evaluate the model's performance. This evaluation confirmed that RSSI data can predict locations with approximately 80% confidence when human movement is present. This demonstrates that a model trained on CSI data can be used to evaluate low-granularity RSSI data consisting of decibel-milliwatt (dBm) values to roughly locate people in the collection space. These results imply that a wide range of IoT devices can be used for privacy invasion in Wi-Fi-dense environments.

0.43

WiFiSpectralJam: A Large-Scale Open Wi-Fi Spectral Scan Dataset with Controlled RF Jamming

cs.NI ·2026-08-16 ·Dania Herzalla, Govind Singh, Willian T. Lunardi, Martin Andreoni
benchmarkcode/data similarity 0.58
Abstract

WiFiSpectralJam is a Wi-Fi spectral-scan dataset comprising 14.52 GB, 96,090 CSV files, and 522,771,130 ordered spectral observations using commodity Wi-Fi sensing hardware. Measurements were acquired with a Raspberry Pi Compute Module 4 equipped with a Qualcomm Atheros QCA9880 802.11ac network interface and the Linux ath10k spectral-scan interface. The dataset spans active and passive scan modalities across the 2.4 and 5 GHz bands and includes real-world benign background captures, benign RF-chamber floor captures, and controlled RF-jamming captures generated with a HackRF One. Jamming conditions vary by transmit power, target channel, and, in the active subset, waveform type. The release provides the raw spectral-scan records together with a file-level metadata manifest, derived spectral-summary features, validation outputs, and reproducible benchmark protocols. These resources support reuse in RF interference characterisation, jamming detection, spectrum monitoring, distribution-shift evaluation, and machine-learning studies using commodity-NIC spectral measurements. The dataset is publicly available at: https://www.kaggle.com/datasets/daniaherzalla/radio-frequency-jamming/data.

0.61

Temporal vs Spectral Resolution in CSI Reporting for Wi-Fi ISAC

eess.SP ·2026-10-16 ·Abolfazl Zakeri, Sumit Roy, Nhan Thanh Nguyen, Markku Juntti
similarity 0.57
Abstract · Under review for publication

CSI feedback is fundamental to proposed uses of Wi-Fi sensing such as human activity recognition (HAR); but it also constitutes significant overhead as resources must be allocated away from data communications. Wi-Fi CSI extraction can be explored along two dimensions in IEEE 802.11bf: reporting intensity, i.e., temporal resolution, and number of reported subcarriers, i.e., spectral resolution. We explore periodic and IEEE 802.11bf threshold-based reporting at matched rates, and uniform decimation and block-mean grouping at matched report sizes. We further propose reporting the mean CSI accumulated since the last report. Using the 802.11bf report size as the metric, we evaluate the accuracy-cost tradeoffs on three public datasets with our proposed model, a convolutional neural network combined with a gated recurrent unit and temporal pyramid pooling. The proposed periodic reporting with mean payload and block-mean grouping improves accuracy by up to 53 percentage points at equal CSI overhead cost. Temporal resolution is generally more cost-effective than spectral resolution. With only at most 7.7% of full-CSI feedback cost, the proposed scheme achieves 96-98% of full-CSI accuracy.

0.23

Entropy-Based Wireless Technology Recognition

eess.SP ·2026-10-16 ·Mohammad Alhellani, Eli De Poorter, Mamoun Guenach, Adnan Shahid
similarity 0.56
Abstract

Wireless Technology Recognition (WTR) enables identifying wireless technologies from received radio signals and is important for spectrum monitoring and management systems. Existing approaches either rely on handcrafted signal features with limited robustness or computationally intensive Deep Learning (DL) models operating on high-dimensional In-phase and Quadrature (IQ) samples or spectrograms. In this paper, we investigate a different hypothesis: wireless technologies can be distinguished through the temporal evolution of their local time-frequency complexity. To capture this behavior, we propose a lightweight WTR framework based on two-dimensional dispersion entropy. Entropy values are extracted from successive spectrogram regions to characterize the evolution of local spectrogram complexity throughout a transmission and summarized into a compact feature representation for classification using a Multilayer Perceptron (MLP). The framework is evaluated on seven wireless technologies, namely IEEE 802.11ah, IEEE 802.15.4 SUN-FSK, IEEE 802.15.4 SUN-OFDM, LoRa, IEEE 802.11n, LTE, and 5G NR, at Signal-to-Noise Ratios (SNRs) ranging from -20 dB to 40 dB. Experimental results show that the proposed approach consistently outperforms IQ-based and Short-Time Fourier Transform (STFT)-based Convolutional Neural Network (CNN) baselines, particularly at low and moderate SNRs. Averaged across all evaluated SNR levels, it achieves 82.73% accuracy, corresponding to improvements of 23.8% and 14.6% over the IQ-based and STFT-based CNN approaches, respectively. Furthermore, the approach maintains its recognition advantage with data-augmented training while requiring substantially shorter training times. The results demonstrate that temporal evolution of local spectrogram complexity provides a robust technology-specific fingerprint and an effective, computationally efficient representation for WTR.

0.21

Device Identification and Motion Classification of Passive Nonlinear RF Transponders Using Wi-Fi Channel State Information

eess.SP ·2026-10-31 ·Cory Hilton, Jeffrey A. Nanzer
similarity 0.56
Abstract

A method of joint device authentication and gesture classification using low-cost passive transponders and 802.11 signals of opportunity from commodity hardware is presented for tracking objects in cluttered environments. The approach detects nonlinear responses of diode-based radio-frequency (RF) transponders by estimating the mean time-varying phase across all subcarrier channel state information (CSI) obtained from standard preambles. These unique responses are enabled by passive transponders utilizing 2.4 GHz meander-line monopole antennas with capacitive top-hat loading and a low-barrier Schottky diode, allowing for low-power omnidirectional sensing and complex gesture recognition across multiple unique devices. The capture system uses a wireless access point to illuminate the transponder with a standard preamble. This signal is modulated by the diode's nonlinear response and transmitted to a single ESP32 receiver to calculate the channel response. Using the modulated CSI, device identification via RF fingerprinting achieves >95% accuracy in both static and dynamic conditions using simple machine learning models. For dynamically moving transponders, a time-varying velocity profile is calculated using a novel phase sanitation approach that significantly reduces the impacts of the non-cooperative network. This enables high-accuracy estimation of micro-motions on a single receiver, achieving a theoretical limit of 9.75 m/s using an amplitude-invariant binary comparator form of the sanitized waveform. The concept is experimentally validated using lightweight CNN-LSTM deep-learning models applied to a diverse dataset of five transponders and three motion profiles. This experimental validation demonstrated a classification accuracy of 98% in both gesture classification and device identification tasks.

0.35

Trajectory-Guided Tokenization of Complex CSI for Wi-Fi Sensing

cs.LG ·2026-10-05 ·Ziyi Wang, Kenuo Xu, Jichu Jiang, Yumeng Yang, Zheng Chen +6 more
similarity 0.56
Abstract

Wi-Fi channel state information (CSI) enables contactless presence detection and gesture recognition. Its high-dimensional complex-valued time series require input representations that preserve informative temporal variations during compression. We propose Trajectory-Guided Tokenization (TGT), which combines complex trajectory decomposition with asymmetric attention to construct compact continuous tokens. For each antenna link and subcarrier, an orthonormal Helmert transform decomposes short, ordered temporal patches into local-center and centered-trajectory coordinates. Keys are learned from the centered-trajectory coordinates, while values retain both components. Learnable queries aggregate subcarriers into frequency slots, which are fused into temporal tokens. Trained jointly from scratch, TGT with TokenMLP achieves the highest mean accuracy of 92.83% among all evaluated frontend-backend combinations on the self-collected dataset. Experiments on EHUNAM and Widar further support the applicability of TGT to cross-domain presence detection and gesture recognition.

0.32

From Activity Recognition to Shift Detection: Variational Wi-Fi Sensing with Evidential Uncertainty

cs.LG ·2026-11-18 ·Luca Cotti, Marco Cominelli, Francesco Gringoli, Lance M. Kaplan, Mani B. Srivastava +5 more
benchmark similarity 0.55
Abstract · 17 pages,8 figures, 8 tables

Human motion perturbs wireless channels, making commodity Wi-Fi devices a practical platform for device-free activity recognition. Yet Channel State Information (CSI) also depends strongly on the person, receiver position, recording session, and surrounding environment, so a classifier can continue producing activity labels after its deployment conditions have moved away from those seen during training. We propose Wi-HAR, a multi-antenna architecture in which four Variational Auto-Encoders learn compact distributions from raw Wi-Fi 6 CSI magnitudes and a delayed-fusion classifier combines their means and log-variances. On twelve activities from a public benchmark, Wi-HAR reaches 96.6% median recognition accuracy, compared with 70.8-81.5% for independently optimized single-antenna models, showing that the antennas provide complementary views of the same activity. We then use the same latent backbone to detect deployment shifts without using shifted samples for model selection or calibration. A class-conditional uncertainty score derived from Evidential Deep Learning achieves a macro-average ROC-AUC of 0.897 across eleven datasets that change receiver position, participant, recording session, or room, and detects 82.5% of shifted samples at a realized 5.2% in-distribution rejection rate. Detection performance nevertheless varies substantially across receiver positions, showing that the same physical change does not induce a uniform uncertainty response. The compact representation also supports shallow decision-tree analysis using variables from several antennas.

0.24