CS Paper Radar

WiFiSpectralJam: A Large-Scale Open Wi-Fi Spectral Scan Dataset with Controlled RF Jamming

Dania Herzalla, Govind Singh, Willian T. Lunardi, Martin Andreoni

cs.NI ·submitted 2026-08-16 13:06 UTC · v1
benchmarkcode/data

Abstract

WiFiSpectralJam is a Wi-Fi spectral-scan dataset comprising 14.52 GB, 96,090 CSV files, and 522,771,130 ordered spectral observations using commodity Wi-Fi sensing hardware. Measurements were acquired with a Raspberry Pi Compute Module 4 equipped with a Qualcomm Atheros QCA9880 802.11ac network interface and the Linux ath10k spectral-scan interface. The dataset spans active and passive scan modalities across the 2.4 and 5 GHz bands and includes real-world benign background captures, benign RF-chamber floor captures, and controlled RF-jamming captures generated with a HackRF One. Jamming conditions vary by transmit power, target channel, and, in the active subset, waveform type. The release provides the raw spectral-scan records together with a file-level metadata manifest, derived spectral-summary features, validation outputs, and reproducible benchmark protocols. These resources support reuse in RF interference characterisation, jamming detection, spectrum monitoring, distribution-shift evaluation, and machine-learning studies using commodity-NIC spectral measurements. The dataset is publicly available at: https://www.kaggle.com/datasets/daniaherzalla/radio-frequency-jamming/data.

Closest papers

Nearest neighbours by meaning across the whole index.

Benchmarking Unsupervised Jamming Detection in 5G Open RAN

cs.AI cs.LG ·2026-11-03 ·Sneihil Gopal, Fernando J. Cintron, Richard A. Rouil
similarity 0.59
Abstract

Radio Frequency (RF) jamming threatens fifth-generation (5G) networks. Open Radio Access Network (Open RAN) telemetry enables jamming detection without dedicated spectrum monitoring equipment, but labeled attack data are rarely available across deployments, motivating unsupervised detectors. Comparing such detectors across algorithmic families, however, remains difficult without ground-truth labels. This paper benchmarks statistical and reconstruction-based unsupervised jamming detectors using a symmetric evaluation interface that combines detection confidence and temporal interval coherence into a detector-independent composite score. We compare a Statistical Ensemble Method (SEM) detector against Vanilla, Long Short-Term Memory (LSTM), and Variational Autoencoder (VAE) baselines on Key Performance Indicator (KPI) telemetry from ten heterogeneous 5G environments with fixed and variable jamming bursts and dynamic jammer gains. Under leave-one-out (LOO) evaluation, SEM achieves a mean composite score of 0.906, compared with 0.688 for the best autoencoder (AE) per fold. Ground-truth validation yields a mean F1-score of 0.918 for SEM, compared with 0.521 for the best AE variant. The composite ranks SEM first in all environments, consistent with F1 rankings. However, in both within-trace and cross-trace evaluation, it fails for detectors that flag far fewer samples than the jamming prevalence, indicating that rankings are reliable only when detection rate matches the expected prevalence.

0.19

Through-Wall Detection using Software-Defined Radio based on adaptive Principal Component Analysis

eess.SP ·2026-09-11 ·Dinuli Naotunna, Wenchao Li, Sanka Piyaratna, Phil Wandel
similarity 0.58
Abstract · 15 pages, 7 figures

Through-Wall Detection (TWD) using opportunistic WiFi signals enables non-invasive sensing for security and rescue applications; however many existing approaches rely on controlled access points or specialised hardware. This paper presents a TWD system that extracts Channel State Information (CSI) from ambient WiFi packets using a customised software-defined radio (SDR), Bluebottle, without requiring transmitter control. The key contribution is a spectral-domain scoring mechanism for adaptively selecting motion-relevant principal components from a Principal Component Analysis (PCA) decomposition of the CSI, using Welch power spectral density estimates to quantify each component's signal-to-noise ratio and spectral concentration within the frequency band associated with human motion. The selected components are then analysed using a continuous wavelet transform to robustly identify time-localised motion events. Experimental results demonstrate that the proposed adaptive component-selection method consistently reduces false detections and produces sharper time-frequency energy ridges compared to conventional fixed-component PCA.

0.26

Temporal vs Spectral Resolution in CSI Reporting for Wi-Fi ISAC

eess.SP ·2026-10-16 ·Abolfazl Zakeri, Sumit Roy, Nhan Thanh Nguyen, Markku Juntti
similarity 0.58
Abstract · Under review for publication

CSI feedback is fundamental to proposed uses of Wi-Fi sensing such as human activity recognition (HAR); but it also constitutes significant overhead as resources must be allocated away from data communications. Wi-Fi CSI extraction can be explored along two dimensions in IEEE 802.11bf: reporting intensity, i.e., temporal resolution, and number of reported subcarriers, i.e., spectral resolution. We explore periodic and IEEE 802.11bf threshold-based reporting at matched rates, and uniform decimation and block-mean grouping at matched report sizes. We further propose reporting the mean CSI accumulated since the last report. Using the 802.11bf report size as the metric, we evaluate the accuracy-cost tradeoffs on three public datasets with our proposed model, a convolutional neural network combined with a gated recurrent unit and temporal pyramid pooling. The proposed periodic reporting with mean payload and block-mean grouping improves accuracy by up to 53 percentage points at equal CSI overhead cost. Temporal resolution is generally more cost-effective than spectral resolution. With only at most 7.7% of full-CSI feedback cost, the proposed scheme achieves 96-98% of full-CSI accuracy.

0.23

Analyzing and Characterizing Multi-Source Interference Effects at Jammertest Norway 2025

eess.SP ·2026-08-16 ·Lucas Heublein, Inigo Cortes Vidal, Tobias Feigl, Alexander Rügamer, Felix Ott
publishedbenchmark similarity 0.56
Abstract · 15 pages, 14 figures

Intentional radio-frequency interference from low-cost GNSS jammers increasingly threatens the accuracy and reliability of satellite-based positioning. Mitigating this threat requires not only detection but also robust waveform classification and characterization, direction-of-arrival inference for localization, and impact estimation on receiver performance under realistic operating conditions; all of which are challenged by strong distribution shifts across devices, sensors, environments, and satellite geometries. We address these challenges by compiling a dedicated real-world dataset recorded during Jammertest 2025 (Andoya, Norway), covering two outdoor test areas with parallel measurements from a single-antenna E1/E5 receiver module and a 2x2 CRPA-array. The dataset spans diverse jamming, spoofing, and meaconing scenarios, including CW, PRN, sweep/chirp, and multi-emitter configurations, and is complemented by per-recording metadata enabling time-aligned ground truth. Methodologically, we benchmark 17 machine learning (ML) architectures for interference-modulation recognition and multi-task characterization (type, occupied bandwidth, and signal strength), and we quantify navigation-relevant degradation via a receiver-aware spectral separation coefficient (SSC) that maps measured spectra to effective (C_s/N_0)_{eff} loss. To enable multi-source analysis, we transfer a YOLOv8s and RF-DETR detector pretrained on a labeled spectrogram dataset to localize multiple simultaneous interferers in GNSS spectrograms and subsequently characterize each detected component. Results show near-99% within-area classification accuracy but substantial cross-area performance drops, highlighting the need for robustness to real-world domain shifts.

0.58

What Does an RF Fingerprint Identify? A Cross-Corpus Evaluation of Hardware-Family-Associated and Unit-Level Signal

cs.CR cs.LG ·2026-11-10 ·Hyojung Han
benchmark similarity 0.54
Abstract · 20 pages, 4 tables, no figures

RF fingerprinting benchmarks report how well a classifier separates transmitters, not whether that separability reflects the individual unit or its hardware family. We compare a benchmark's real hardware grouping with size-matched random groupings of the same devices, using calibrated, unclipped variational lower bounds under label-blind, device-level cross-fitting on devices never seen in training. On WiSig (OFDM Wi-Fi), the generation grouping exceeded all 999 matched random groupings (permutation p = 0.001, the resolution floor), although no grouping attained a positive certified bound, and the direction survives removing channel equalization. A preregistered replication on a LoRa corpus (chirp spread spectrum, three hardware models), with a front-end frozen on synthetic data, again exceeded all 999 (p = 0.001), and two sensitivity analyses judged by a reversal rule fixed in advance did not reverse the direction. This is a directional replication only: the excess magnitude reflects a miscalibrated null, the chain-rule decomposition leaves a residual of +0.296 bits, and capture order is undocumented. In a same-model corpus of 122 ESP32 radios, a temperature-calibrated held-out bound of +3.338 bits (label entropy 6.931 bits) indicates substantial device-specific identity, not separable from per-device capture-session effects; relying on the calibrated bound was decided after the uncalibrated bound changed sign. On synthetic transmitters a high-capacity convolutional decoder reaches 98.5% of a known 6-bit ceiling, and the audit protocol leaves chain-rule residuals of +0.072 bits (synthetic, fixed physical features) and +0.060 bits (WiSig, audit features). Two further corpora were excluded by preregistered ingest gates. Across WiSig and LoRa, hardware-family groupings consistently produced stronger identity-associated signal than size-matched random groupings.

0.38

CHANNELS4WORLD: An Environment-Scale Dataset for Wireless Foundation Models

cs.LG cs.ITeess.SP ·2026-11-08 ·Joonkyu Jang, Hyung-Joo Moon, Kwang Soon Kim, Seong-Lyun Kim, Jakob Hoydis +2 more
dataset similarity 0.54
Abstract · 21 pages, 7 figures, 7 tables

Wireless foundation models learn reusable representations across tasks, configurations, and deployment environments. Their pretraining requires environmental breadth, yet wireless datasets often sample few sites densely. We introduce Channels4World, a scene-centered dataset of 100,000 distinct outdoor RF scenes and a procedural method for generating them. Each scene links a generated environment and RF material assignments to 32 base-station (BS) positions, 16,384 UE positions, and aligned variable-length multipath and ordered interaction records at 3.5 and 7~GHz. The corpus comprises 52.43 billion physical BS-UE pairs, 104.86 billion frequency-specific evaluations, and a 29.14-TB packaged payload. Scene identity aligns geometry, placements, channels, and interactions across frequencies, allowing environmental breadth and within-scene observation density to vary independently. The public release offers predefined subsets at multiple scales and separate access to corpus components. A deterministic 90K/10K scene-level train-test split keeps both frequencies and all scene components together. We characterize morphology, RF materials, and transceiver placement across three generation profiles. Controlled propagation and path-retention analyses show that diffraction materially affects retained-link availability and multipath structure, while the retention policy reduces storage substantially with little loss in represented aggregate power. Under matched training exposure, models trained on broader scene collections perform better on held-out scenes, although an equal-episode control shows that scene count alone cannot explain the gain. By making environmental breadth explicit and controllable, Channels4World supports the development and evaluation of wireless foundation models for generalization across deployment environments.

0.27

Rainfall Sensing via Mobile Communication Signals

eess.SP cs.NI ·2026-08-17 ·Zhongqin Wang, J. Andrew Zhang, Kai Wu, Y. Jay Guo
similarity 0.53
Abstract · 13 pages, 13 figures

Rainfall monitoring is important for hydrological observation, disaster warning, and environmental sensing, but conventional rain gauges and weather radars suffer from sparse deployment and high infrastructure costs. This paper proposes PMN-RainSense, a rainfall sensing framework using sub-6-GHz mobile communication signals that supports practical single-antenna deployment. Unlike attenuation-based approaches, which are unreliable at sub-6 GHz because rain-induced attenuation over short mobile access links is only on the order of hundredths of a decibel, the proposed framework exploits fine-grained dynamics. A spectral-temporal channel state information (CSI) compensation method suppresses packet-wise timing and phase distortions while preserving sensing-relevant information. Rainfall-sensitive features are extracted from the delay-Doppler domain to mitigate environmental interference, with angle-domain filtering as an optional extension for multi-antenna receivers. Under bandwidth and antenna constraints, rainfall-correlated Doppler fluctuations serve as the dominant sensing signature, while Doppler-domain normalization improves robustness across links and deployments. Controlled WiFi experiments demonstrate rainfall-associated Doppler broadening and achieve a three-class classification accuracy of 95.48% using a random forest classifier. Long-Term Evolution (LTE) CSI measurements collected from cellular base stations over 11 carrier frequencies from 0.763 to 2.68 GHz yield a mean absolute error (MAE) of 0.25-0.27 mm/h for rainfall intensity estimation using a one-dimensional convolutional network.

0.26

RFCheck: Synthetic RF Sensing Data Can Fail Measurement Consistency

eess.SP ·2026-08-10 ·Di Zhang, Yuanhao Cui, Tony Xiao Han, Xiaojun Jing
similarity 0.53
Abstract

Synthetic radio-frequency (RF) sensing data are widely used to augment wireless sensing tasks, yet their measurement consistency with real data is rarely evaluated under matched acquisition conditions. This paper identifies a measurement-consistency failure mode: synthetic samples may pass task-facing checks while deviating from the measurement behavior of real samples collected and processed by the same sensing pipeline, potentially introducing synthetic shortcuts and biasing downstream model selection. We propose RFCheck, a calibrated measurement audit that uses held-out real data from the same acquisition and preprocessing pipeline as the reference. RFCheck calibrates representation-specific tests on real samples and flags synthetic samples whose responses exceed the calibrated real-data range. We use the audit for candidate screening and residual repair. We validate RFCheck primarily on Wi-Fi channel state information (CSI), where the audit examines delay-domain and local frequency-domain structures. Experiments show that aggregate statistics and label-based screening can miss measurement failures detected by RFCheck. Under the same label acceptance rule, low-risk and high-risk synthetic candidates exhibit different downstream behavior. A repair reference reduces the flagged ratio to 10.83% while preserving mean task performance. In a held-out proposal study, correction followed by calibrated selection produces a class-balanced set with no flagged samples under a fixed training budget. We further apply the same calibration principle to frequency-modulated continuous-wave (FMCW) millimeter-wave radar gesture sensing. The results show that synthetic RF sensing data can violate measurement consistency even when conventional task checks are satisfied, motivating measurement-aware diagnosis and mitigation before augmentation.

0.04