CS Paper Radar

Benchmarking Unsupervised Jamming Detection in 5G Open RAN

Sneihil Gopal, Fernando J. Cintron, Richard A. Rouil

cs.AI cs.LG ·submitted 2026-11-03 05:58 UTC · v1

Abstract

Radio Frequency (RF) jamming threatens fifth-generation (5G) networks. Open Radio Access Network (Open RAN) telemetry enables jamming detection without dedicated spectrum monitoring equipment, but labeled attack data are rarely available across deployments, motivating unsupervised detectors. Comparing such detectors across algorithmic families, however, remains difficult without ground-truth labels. This paper benchmarks statistical and reconstruction-based unsupervised jamming detectors using a symmetric evaluation interface that combines detection confidence and temporal interval coherence into a detector-independent composite score. We compare a Statistical Ensemble Method (SEM) detector against Vanilla, Long Short-Term Memory (LSTM), and Variational Autoencoder (VAE) baselines on Key Performance Indicator (KPI) telemetry from ten heterogeneous 5G environments with fixed and variable jamming bursts and dynamic jammer gains. Under leave-one-out (LOO) evaluation, SEM achieves a mean composite score of 0.906, compared with 0.688 for the best autoencoder (AE) per fold. Ground-truth validation yields a mean F1-score of 0.918 for SEM, compared with 0.521 for the best AE variant. The composite ranks SEM first in all environments, consistent with F1 rankings. However, in both within-trace and cross-trace evaluation, it fails for detectors that flag far fewer samples than the jamming prevalence, indicating that rankings are reliable only when detection rate matches the expected prevalence.

Closest papers

Nearest neighbours by meaning across the whole index.

O-RAN-Native Jamming Detection Under Network Heterogeneity

cs.LG ·2026-10-14 ·Sneihil Gopal, Fernando J. Cintrón, Richard A. Rouil
similarity 0.76
Abstract

Radio-frequency jamming threatens cellular network operations in contested environments. The Open Radio Access Network (O-RAN) architecture exposes per-User Equipment (UE) telemetry through the E2 interface, enabling Key Performance Indicator (KPI)-based jamming detection without proprietary hardware. However, operational deployment demands detection methods that generalize across heterogeneous networks. We propose a Statistical Ensemble Method (SEM) combining adaptive Median Absolute Deviation (MAD)-based baseline detection, count-based anomaly detection, and abrupt change detection through a weighted voting system. SEM operates in two modes: a cold-start mode requiring no labeled data for immediate deployment, and a supervised mode where parameters are refined offline via grid search as labeled data accumulates. We evaluate SEM against five machine learning (ML) classifiers and five deep learning (DL) sequence models using approximately 25 hours of testbed data comprising logs from eight heterogeneous 5G environments, employing both single-environment and multi-environment leave-one-out (LOO) validation. Our analysis indicates that under conditions not encountered during training (distribution shift), learning-based models tend to lose recall and miss jamming events, whereas SEM, even in cold-start mode, maintains detection capabilities at the cost of false alarms. Furthermore, SEM's parameter optimization can be mapped to O-RAN's Non-RT RIC as an rApp for continuous refinement, allowing operators to transition to learning-based alternatives once corpus coverage is sufficient.

0.44

Analyzing and Characterizing Multi-Source Interference Effects at Jammertest Norway 2025

eess.SP ·2026-08-16 ·Lucas Heublein, Inigo Cortes Vidal, Tobias Feigl, Alexander Rügamer, Felix Ott
publishedbenchmark similarity 0.66
Abstract · 15 pages, 14 figures

Intentional radio-frequency interference from low-cost GNSS jammers increasingly threatens the accuracy and reliability of satellite-based positioning. Mitigating this threat requires not only detection but also robust waveform classification and characterization, direction-of-arrival inference for localization, and impact estimation on receiver performance under realistic operating conditions; all of which are challenged by strong distribution shifts across devices, sensors, environments, and satellite geometries. We address these challenges by compiling a dedicated real-world dataset recorded during Jammertest 2025 (Andoya, Norway), covering two outdoor test areas with parallel measurements from a single-antenna E1/E5 receiver module and a 2x2 CRPA-array. The dataset spans diverse jamming, spoofing, and meaconing scenarios, including CW, PRN, sweep/chirp, and multi-emitter configurations, and is complemented by per-recording metadata enabling time-aligned ground truth. Methodologically, we benchmark 17 machine learning (ML) architectures for interference-modulation recognition and multi-task characterization (type, occupied bandwidth, and signal strength), and we quantify navigation-relevant degradation via a receiver-aware spectral separation coefficient (SSC) that maps measured spectra to effective (C_s/N_0)_{eff} loss. To enable multi-source analysis, we transfer a YOLOv8s and RF-DETR detector pretrained on a labeled spectrogram dataset to localize multiple simultaneous interferers in GNSS spectrograms and subsequently characterize each detected component. Results show near-99% within-area classification accuracy but substantial cross-area performance drops, highlighting the need for robustness to real-world domain shifts.

0.58

Cloudy Skies: Early Detection of Jamming Against Iridium LEO Satellite-IoT Links

cs.CR ·2026-11-05 ·Ingrid Huso, Giulia Fliescher, Savio Sciancalepore, Gabriele Oligeri
dataset similarity 0.66
Abstract

Low Earth Orbit (LEO) satellite-IoT systems increasingly provide connectivity to mobile assets in remote areas, which makes their resilience to radio-frequency jamming a growing concern. Timely jamming detection, i.e., before complete link failure, has been studied for terrestrial networks and Global Navigation Satellite Systems (GNSS), but it remains unclear whether these approaches are effective on LEO links, where propagation varies rapidly, the received signal is weak, and jamming should be detected from the messages that are still correctly received. This paper investigates the extent to which jamming of Iridium LEO satellite-IoT links can be detected from the physical layer of correctly decoded messages. To this aim, we collect and publicly release a real-world dataset of Iridium messages under 47 jamming conditions, spanning two propagation environments, static and mobile receivers, and different jammer distances, powers, and signal types. We use this dataset to analyze three one-class autoencoder-based anomaly detectors operating on physical-layer information and compare them against two signal-quality estimators commonly used as jamming indicators in GNSS-based applications. Our results show that detectability is governed by the rise of the receiver noise floor, through which jammer power, distance, and receiver mobility act. With 1000-sample chunks, i.e., 40 ms of received signal at 25,000 samples per second (about four correctly decoded messages), the autoencoders reach an AUC of at least 0.84 whenever a noise jammer raises the noise floor by at least 9 dB, whereas the $C/N_0$ and SNR estimators fail, since received messages, although correctly decoded, retain a high SNR under jamming. Therefore, timely jamming detection for LEO satellite-IoT links like Iridium should rely on physical-layer information beyond the signal-quality metrics adopted in the GNSS domain.

0.27

Jamming Detection in 5G/6G Networks: From O-RAN Concept to OCUDU Deployment

cs.NI ·2026-09-16 ·Marcin Hoffmann, Lukasz Kulacz, Osama Baldo, Marcin Pakula, Balaji Raghothaman
publishedcode/data similarity 0.62
Abstract · Accepted for presentation and publication in proceedings of IEEE MILCOM 2026 conference

RF jamming poses a severe threat to 5G/6G networks, increasing packet latency being especially disruption to mission-critical URLLC services. This paper introduces a proactive Jamming Detection xApp (JD-xApp) for the Open RAN architecture that detects attacks by monitoring the moving-average Block Error Rate (BLER) via the E2 interface. Upon detection, the algorithm overrides standard link adaptation, enforcing a robust upper ceiling on the Modulation and Coding Scheme (MCS) to stabilize latency. To counter O-RAN platform adoption challenges, we transition the framework to an open-source Centralized Unit/Distributed Unit implementation (OCUDU). Evaluated with high-end Keysight lab equipment including the UXM 5G Wireless Test Platform and the PROPSIM F64 channel emulator, the JD-xApp reduces the expected number of packet retransmission attempts by about 67.3%. Finally, the system's feasibility is validated via over-the-air deployment using the POWDER lab infrastructure.

0.61

KPI-Aware Multimodal Anomaly Detection for 5G and Open RAN Telemetry

cs.LG ·2026-10-18 ·Chiman Salavati, Liang Wu, Kelly Wan, Mayank Darbari, Liangjie Hong
top venuebenchmark similarity 0.59
Abstract · Accepted at the IEEE ICDM 2026 Applied Research Track

Reliable anomaly detection is a deployment bottleneck for 5G/Open RAN observability and emerging self-optimizing 6G systems, where hundreds of heterogeneous KPIs, severe class imbalance, and strict alert budgets make purely numerical scores brittle. We present KAC, a deployment-oriented KPI-aware multimodal anomaly-detection framework that uses KPI-level residual-text alignment to turn compact operator-style summaries into a learnable feedback signal over full-KPI temporal evidence. This gives the detector broad numerical coverage like modern time-series models, while retaining the sparse KPI-specific reasoning that makes operator feedback sustainable in a future operator-facing workflow. Across public telecom telemetry, enterprise-scale Open RAN observability data, and a Nokia benchmark built from real 5G RAN production packet traces with realism-hardened injected anomalies, KAC achieves strong threshold-based detection performance while remaining competitive on threshold-free ranking metrics. On TelecomTS, at a fixed 2.5 percent false-positive-rate operating point, KAC achieves the highest recall among the evaluated residual-based methods while maintaining comparable precision; across the evaluated benchmarks, it remains robust under substantial class imbalance. KAC is integrated in pre-production shadow mode with Nokia's GKE-based KPI construction pipeline, where it continuously scores telemetry windows alongside an internal packet-level anomaly detector for operational evaluation.

0.43

WiFiSpectralJam: A Large-Scale Open Wi-Fi Spectral Scan Dataset with Controlled RF Jamming

cs.NI ·2026-08-16 ·Dania Herzalla, Govind Singh, Willian T. Lunardi, Martin Andreoni
benchmarkcode/data similarity 0.59
Abstract

WiFiSpectralJam is a Wi-Fi spectral-scan dataset comprising 14.52 GB, 96,090 CSV files, and 522,771,130 ordered spectral observations using commodity Wi-Fi sensing hardware. Measurements were acquired with a Raspberry Pi Compute Module 4 equipped with a Qualcomm Atheros QCA9880 802.11ac network interface and the Linux ath10k spectral-scan interface. The dataset spans active and passive scan modalities across the 2.4 and 5 GHz bands and includes real-world benign background captures, benign RF-chamber floor captures, and controlled RF-jamming captures generated with a HackRF One. Jamming conditions vary by transmit power, target channel, and, in the active subset, waveform type. The release provides the raw spectral-scan records together with a file-level metadata manifest, derived spectral-summary features, validation outputs, and reproducible benchmark protocols. These resources support reuse in RF interference characterisation, jamming detection, spectrum monitoring, distribution-shift evaluation, and machine-learning studies using commodity-NIC spectral measurements. The dataset is publicly available at: https://www.kaggle.com/datasets/daniaherzalla/radio-frequency-jamming/data.

0.61

SVM + CFAR + OR: A Hybrid Machine-Learning-CFAR Receiver for Low-False-Alarm PRACH Preamble Detection in 5G NR and Beyond

eess.SP ·2026-11-05 ·Filip Ferenc, Michal Szczachor
similarity 0.58
Abstract · 12 page, 10 figures

The physical random access channel (PRACH) enables initial access between user equipment and the base station, making reliable preamble detection essential for cellular networks. Growing device density in 5G and beyond-5G networks, massive machine-type communication, and the shift towards machine-learning-driven radio interfaces challenge conventional analytical detectors, particularly in complex radio environments and at low signal-to-noise ratios. This article formulates preamble detection as a 64-class classification problem and introduces two model-agnostic contributions: a robust adaptive threshold implementing the constant false alarm rate (CFAR) principle in the classifier decision-score domain (MAD-CFAR), and a hybrid receiver combining a learned detector with a conventional power-delay-profile CFAR detector through a logical OR rule. The learned branch is evaluated using two models trained on the same GPU-generated dataset: a support vector machine (SVM) with principal component analysis and a lightweight one-dimensional convolutional neural network (CNN). On a held-out test set, the SVM achieves 98.58% accuracy (macro-AUC 0.9991), while the CNN reaches 99.29% accuracy (macro-AUC 1.0000) at lower inference cost and memory footprint. MAD-CFAR reduces the learned branch's false alarm rate to near zero on the noise calibration campaign. The OR hybrid retains the analytical detector's low, standard-compliant false alarm rate while extending detection capability. Across six propagation channels and 258 conformance-style tests, the SVM-based hybrid improves low-SNR sensitivity by several decibels without increasing missed detections relative to the analytical detector. Under the same false alarm constraint, the CNN is competitive in some channels but currently trails the SVM in high-delay-spread multipath conditions.

0.39

Controlled Radio Fault Injection and Telemetry Evaluation for Open 5G RANs

cs.NI eess.SY ·2026-10-22 ·Babak Azkaei, Maxim Bîtiu, Georgios Exarchakos, Kishor Chandra Joshi
published similarity 0.57
Abstract

Radio access network (RAN) telemetry reveals radio conditions, protocol behavior, and their consequences for applications. Evaluating its usefulness requires controlled impairments and observations of the same execution. We present C and Python channel brokers and a fault injection workflow for software 5G testbeds connecting an OCUDU base station and a software UE through ZeroMQ. The brokers apply scheduled, directional transformations to I/Q samples and restore the link, while the workflow jointly records applied faults, native and programmable (codelet) telemetry, and application delay. We demonstrate this capability through 45 comparative trials of brief uplink interruptions and stepped additive noise. These use cases distinguish recognizing a radio change from measuring its service consequence: native missing-feedback events retrospectively identify interruptions, whereas noise changes decoding-error measurements without producing those events. Median on-time round-trip times remain near 30 ms, but the prespecified comparisons show mean increases in on-time 95th-percentile delay of 354 and 604 ms for one and five interruptions, and 113 ms for noise. Adding receive-side radio link control (RLC) codelet summaries did not improve interruption classification on held-out trials. The framework provides a reusable way to evaluate measurement choices under known radio faults, before using them in monitoring or learning systems.

0.31