CS Paper Radar

Ananas: A Networked Audio System for Distributed Spatial Audio Applications

Thomas Rushton, Romain Michon, Tanguy Risset

cs.SD eess.AS ·submitted 2026-11-02 13:04 UTC · v1
published

Abstract

Spatial audio has an accessibility problem. Largescale spatial and immersive audio installations remain costly and exclusive, with high barriers to entry. We propose ''Ananas,'' a networked audio system consisting of network protocols, control software and microcontroller firmware, with the aim of rendering spatial audio applications accessible to a broad cohort of potential users. Based on a network of low-cost microcontroller development boards programmed in the Faust programming language, synchronised to nanosecond order via IEEE 1588 Precision Time Protocol, and controlled by approachable, digital audio workstation-based tooling, Ananas represents an opportunity to disrupt and democratise the spatial audio landscape. In this paper we demonstrate Ananas's protocols for audio and control data transmission and device discovery, its methods for media clock and presentation time recovery, and its applications to wave field synthesis and higher order ambisonics in a modular, scalable form.

Journal ref
IS2 2026 - IEEE 7th International Symposium on the Internet of Sounds, Oct 2026, Cannes, France

Closest papers

Nearest neighbours by meaning across the whole index.

Ambisonics: Introducing an Accessible, Distributed Approach

cs.SD eess.AS ·2026-10-29 ·Thomas A Rushton, Romain Michon, Tanguy Risset, Clemens Wegener, Pierre Lecomte
publishedunusual similarity 0.75
Abstract

This paper presents an accessible, distributed approach to higher order ambisonics using a network of low-cost microcontroller-based devices. Leveraging recent advances in embedded computing, networked audio, and precise time synchronization, the system offers an alternative to conventional centralized architectures that typically require expensive multichannel interfaces and high-performance digital signal processing hardware. The proposed architecture combines an audio plugin for soundfield design with a modular network of ambisonics processing units, which, exploiting the parallelisable nature of ambisonics decoding, are each responsible for a subset of loudspeaker outputs. Synchronization is achieved through the IEEE 1588 Precision Time Protocol, complemented by adaptive clock correction to maintain sub-microsecond alignment between devices. A third-order ambisonics implementation demonstrates the viability of the approach, with potential scalability to higher orders and larger arrays. Overall, this work contributes to the development of frugal, distributed solutions for immersive audio, expanding access to ambisonics-based systems for a wide range of applications.

0.41

pyFDN: A Python Toolbox for Feedback Delay Network Design, Analysis, and Optimization

eess.AS ·2026-10-19 ·Sebastian J. Schlecht, Facundo Franchino, Jeremy B. Bai
code/data similarity 0.58
Abstract

Feedback delay networks (FDNs) provide a compact representation of recursive audio systems for artificial reverberation and decorrelation. Their practical use spans structured matrix design, acoustic decay shaping, numerical simulation, and modal analysis, increasingly combined with differentiable optimization. We present pyFDN, an open-source Python toolbox that brings these operations into a common workflow. The library combines numerical design and analysis routines with block-based time-domain processing and integration with FLAMO for frequency-domain differentiable processing. Explicit network builds and JSON presets connect design, optimization, rendering, and reuse. This paper describes the software architecture, representative capabilities, and reproducibility mechanisms of version 0.5.0, providing a reference for research and teaching that use the toolbox.

0.52

Spatial DJ: Spatial Audio Control for Arbitrary Loudspeaker Layouts

cs.SD cs.HCeess.AS ·2026-10-31 ·Anastasia Geleta, Margarita Geleta
similarity 0.55
Abstract · 20 pages, 6 figures

Object-based spatial audio promises render-anywhere playback, yet deploying it in a new venue still requires two tasks that are rarely addressed together: acquiring the physical loudspeaker geometry and enabling creators manipulate spatial audio while listening through the target loudspeaker system rather than a headphone proxy. We present Spatial DJ, a system for on-site loudspeaker layout acquisition and real-time spatial audio rendering and control, using head-worn AR in a coordinate frame aligned to the physical loudspeakers. In an 18-loudspeaker room, we evaluate calibration accuracy, repeatability, and control latency, and conduct an 18-participant listener study comparing diffuse and orbiting point-source rendering configurations applied to vocal and instrumental layers. Orbiting point-source conditions received higher ratings of perceived immersion, energy, and novelty than the diffuse baseline. Beyond this controlled setting, four representative deployments illustrate reuse of the same system across heterogeneous loudspeaker venues.

0.35

Spatial Audio Coding Through Relative Room Impulse Response Estimation

eess.AS ·2026-09-08 ·Nour Bouayed, Adrien Llave, Jérôme Daniel, Pascal Scalart
similarity 0.53
Abstract · Submitted to International Networked Immersive Audio 2026 (satellite Event of IEEE IS2 2026)

Immersive virtual listening relies on spatial audio technologies such as Higher-Order Ambisonics (HOA), which represent sound scenes as multichannel signals. As the desired spatial resolution increases, so does the number of channels, making efficient compression essential for transmission over bandwidth-limited networks. Moreover, to facilitate deployment by network operators, the target bitrate for immersive audio coding should ideally remain close to the 25 kbps currently allocated to VoLTE audio services. State-of-the-art parametric codecs, such as the recently standardized Immersive Voice and Audio Services (IVAS) codec, achieve compression by transmitting spatial metadata together with a reduced number of transport channels. However, recent studies have shown that IVAS performance degrades on reverberant content, particularly at low bitrates, a limitation that suggests its inability to accurately model room acoustics. In this paper, we propose a novel HOA coding scheme based on the explicit and blind estimation of the Relative Spatial Room Impulse Response (ReSRIR), using a beamformed version of the HOA signal as a reference signal. By exploiting the structure and sparsity of the estimated ReSRIR, we derive an efficient parametric representation for immersive audio coding. Experimental evaluations show that the proposed method achieves higher compression than IVAS in the single-transport-channel regime, while maintaining comparable to slightly better quality.

0.22

Samsone: A Family of Open Small Audio Language Models for On-Device Inference

eess.AS cs.AI ·2026-09-18 ·Piotr Masztalski, Michał K. Grzeszczyk, Olaf Sikorski
top venuecode/data similarity 0.53
Abstract · Accepted for Interspeech 2026

The success of Large Audio Language Models has driven the development of massive multimodal networks exceeding billions of parameters. However, the demand for privacy-preserving, low-latency processing has shifted focus toward Small Audio Language Models (SALMs) capable of on-device execution. In this paper, we introduce Samsone, a family of SALMs designed for edge computing. Our core model, Samsone-134M, establishes a new state-of-the-art for its size class across multiple benchmarks. We further explore the scaling laws of SALMs by introducing Samsone-99M and Samsone-356M. Despite their compact footprint, the Samsone family delivers performance competitive with models orders of magnitude larger. To foster open research and reproducibility, we train Samsone on publicly available data. We release the training code, model weights, mobile-optimized checkpoints and provide an open-source Android application to demonstrate real-time on-device inference of Samsone.

0.58

LiteCASS: A Lightweight End-to-End Network for Real-Time Stereo Cinematic Audio Source Separation

cs.SD ·2026-09-20 ·Yuanxin Guo, Qiang Ji, Mengmei Liu, Yuhan Lv, Ningning Pan +1 more
similarity 0.52
Abstract · 5 pages, 2 figures, 3 tables

Cinematic audio source separation (CASS) decomposes a soundtrack into dialogue, music, and sound-effects (SFX) stems. Existing CASS methods, however, suffer from two critical limitations: they rely on heavily parameterized network architectures and GPU-class hardware, limiting their use in real-time and resource-constrained scenarios, and they are overwhelmingly designed for monaural signals, leaving the stereo scenario largely unexplored. We present LiteCASS, to our knowledge the first lightweight end-to-end network for real-time stereo CASS. LiteCASS combines deterministic STFT subband rearrangement with two jointly trained compact U-Nets: the first extracts dialogue, and the second separates music and SFX from the predicted non-speech component. A multi-task waveform-domain L1 loss supervises all stems. On a spatialized stereo extension of DnR v3, LiteCASS-K8 uses only 1.06M parameters and 0.72G MACs per second, while achieving the highest averaged SI-SDR among the compared CASS baselines.

0.16

TinyAudio: Compact and Efficient Text-to-Audio Generation for Low-Resource Deployment

cs.SD eess.AS ·2026-09-25 ·Junxi Liu, Xiquan Li, Wenhao Guan, Yifan Duan, Zhikang Niu +3 more
similarity 0.52
Abstract

Text-to-audio (TTA) generation has advanced rapidly in generation quality and instruction following. However, representative systems often require around a billion parameters, limiting deployment on resource-constrained devices. This paper introduces TinyAudio, a compact flow-matching-based TTA model for low-resource deployment. At its core, TinyAudio uses TA-DiT, a 35M single-stream flow-matching Transformer. TinyAudio also includes TA-CLAP, a 32M audio-aligned text encoder, and TA-VAE, whose 20M decoder reconstructs 44.1 kHz audio from compressed latents. TinyAudio has only 87M parameters in total, over 90% fewer than representative billion-parameter pipelines, and uses 0.48 GB peak GPU memory. TinyAudio achieves competitive generation quality on AudioCaps and TTA-Bench. We further introduce TinyAudio-MF, a MeanFlow-accelerated model that enables real-time generation with a four-core CPU quota. Our results demonstrate a practical quality-footprint trade-off for low-resource TTA deployment.

0.27

Bin2Ambi: Learning Ambisonic Soundfield Reconstruction from Head-Tracked Binaural Audio

eess.AS ·2026-09-30 ·Gavin Milner, Nils Peters
similarity 0.50
Abstract

User-generated content has become one of the most-consumed content types. However, capturing spatial audio with consumer hardware is still challenging. Given the widespread success of smart earbuds, binaural audio could be a promising option to capture spatial audio on consumer devices, but its inherent signal characteristic limits its usability as a recording format. In this paper, we propose and define a new task, Binaural to Ambisonics conversion (Bin2Ambi). In our proposed system, we exploit simultaneously captured head-tracking data provided from the motion sensors in smart earbuds. We show that this motion data help resolve the inherent directional uncertainty of two-channel binaural audio due to front-back localization ambiguities and lateral errors in the cone of confusion. Our results show that our system learns directional and diffuse-field information and that head-tracking especially reduces extreme localization errors. Objective metrics and a subjective listening test suggest that the converted Ambisonics soundfield achieves an average directional error of up to $11.8^\circ$ and a perceived spatial quality similar to a DirAC ground-truth model. The proposed algorithm can serve as a baseline for future improvements to this novel Bin2Ambi task.

0.23