CS Paper Radar

uTECH Turbo-MOVES: The Intersection of Software Architectural Innovation and Sustainable Mobility Analysis

Cafer Avcı, Alireza Yazdiani, Roopak Srinivasan, Megh Khaire, Mohammad Tayarani, H. Oliver Gao

cs.SE cs.DC ·submitted 2026-11-02 15:47 UTC · v1
benchmark

Abstract

Transportation is a major source of energy consumption, greenhouse gas emissions, and criteria air pollutants, making efficient emissions estimation essential for environmental planning and policy analyses. The U.S. Environmental Protection Agency's Motor Vehicle Emission Simulator (MOVES) supports detailed emissions modeling, but its computational demands constrain large-scale scenario analyses. This study introduces uTECH Turbo-MOVES, a software architecture that expedites MOVES computation without modifying its Calculator modules or input/output structure. By combining RunSpec partitioning, container isolation, in-memory intermediate storage, and concurrent workload orchestration, it improves execution efficiency. We evaluate six benchmark cases spanning County, Default, and Project scales and both Emission Inventory and Emission Rates modes. Results demonstrate a measured 5.5x and an estimated 15.3x per-run speedup for Default-scale workloads, and an 84.8x campaign speedup for an eight-county Emission Rates analysis. Although gains vary by workload and hardware configuration, uTECH Turbo-MOVES enables more extensive environmental assessments and transportation policy evaluation.

Comment
28 pages, 6 figures, under-review with the journal

Closest papers

Nearest neighbours by meaning across the whole index.

Exploiting the Benefits of V2B Application on Peak Shaving of Data Center Loads

eess.SY ·2026-08-31 ·Arya Joshi, Hamed Haggi, Chinmay Morankar
similarity 0.61
Abstract · Digest submission version for IEEE IAS Annual Meeting 2026

The accelerated growth in data center projects has introduced a demand-driven bottleneck throughout power grids and contributed to a substantial increase in carbon emissions. These concerns are fueling discussions on methods to use existing energy assets to drive operational efficiency. To this end, this paper explores the benefits of Vehicle-to-Building (V2B) applications to support peak shaving of data center cooling loads. Initially, a literature review was conducted considering V2B constraints and optimization methods including SoC limitations, EV participation, tariffs, and building loads. This analysis was then used to develop a conceptual case study of a 10 MW data center in Loudoun County, VA by simulating a temperature-dependent load profile and adjusting the V2B participation of 40 commercial and passenger EVs. Simulation results indicate that, depending on seasonal variations in cooling load demands, strategic deployment of V2B assets between 12-5pm can offset gross cooling loads by 13-36%.

0.17

CATS: A Carbon-Aware Task Simulator for Reducing AI Data Center Emissions

cs.DC ·2026-09-13 ·Dayuan Chen, Ziliang Zong
similarity 0.60
Abstract · 14 pages, 12 figures, 8 tables

The rapid rise of generative AI is accelerating cloud data center expansion, with electricity demand projected to double by 2026. Because carbon-intensity varies by more than 5.5x across grids and times of day, where and when inference tasks execute significantly affects operational emissions. We address this issue with three aspects in this paper. First, we compile a global alignment dataset unifying 140 operational and planned cloud regions across 8 major providers with five-minute carbon-intensity traces for 145 grid regions from 2022 to 2024, revealing that 50% of current sites lie in medium-to-high carbon-intensity grids, indicating a siting-carbon mismatch and unrealized carbon reduction potential. Second, we develop CATS (Carbon-Aware Task Simulator), a flexible trace-driven framework that profiles six AI inference tasks across multiple GPU types, synthesizes realistic diurnal curve, geographical and task mixes, and SLA constraints, and evaluates spatial and temporal schedulers against two baselines while reporting comprehensive metrics including carbon emissions, energy consumption, runtime, queue delay, and hardware utilization. Third, we quantify achievable CO2 savings under realistic constraints: in a 24-hour trace with 600,000 tasks at fleet utilization of 0.37, spatial shifting reduces CO2 by 38.4% versus speed-first baseline, while temporal shifting yields 16% savings with bounded SLA violations at 3.27%. These results advocate locating future data centers in low carbon-intensity grids and demonstrate that carbon-aware scheduling on today's fleets can achieve substantial operational emissions reduction.

0.18

ServeTwin: A Benchmark-Validated Simulator for Distributed LLM Architecture Exploration

cs.PF cs.DC ·2026-10-02 ·Sungjoon Park, Changue Jung, Kyungno Joo, Mincheol Kang, Jaehyung Ahn +2 more
benchmark similarity 0.58
Abstract

Evaluating distributed LLM serving designs on physical clusters is costly. Yet existing simulators provide only subsets of the capabilities needed for realistic design exploration: stateful closed-loop execution, timing prediction without profiling target hardware, and direct execution of unmodified serving benchmarks. We present ServeTwin, a closed-loop simulator that couples specification-driven analytical timing with a stateful serving loop. This coupling captures feedback among request completion, scheduling, queue state, and KV-cache evolution, including prefill-decode disaggregation and multi-turn agent workloads. ServeTwin avoids target-hardware operator profiling through iSTAGE, an analytical trace generator that derives per-iteration traces from model and engine specifications while representing ragged batches and discrete engine mechanisms such as CUDA-graph batch padding. It further decomposes execution time into component-owned throughput, scheduler, and runtime costs. This ownership lets unaffected parameters transfer across platforms and confines recalibration to changed hardware or software components. ServeTwin implements a vLLM-compatible interface and runs unmodified serving benchmarks. Against real deployments, it reproduces InferenceX's steady-state throughput-interactivity frontier with a 3.6% mean error and predicts LMBenchmark's multi-turn performance with a 9.9% error while tracking KV-cache evolution. Pre-silicon sweeps reveal that the preferred HBM bandwidth-capacity tradeoff reverses across workload states and that increasing concurrency shifts the bottleneck from memory bandwidth to scheduler and runtime overheads. Together, these capabilities enable practical exploration of distributed LLM serving systems before target hardware is available.

0.19

GreenDirector: carbon- and water-aware workload placement for sustainable computing

cs.DC ·2026-09-11 ·Jaime Iglesias Blanco, Ignacio Heredia, María Castrillo, Andrei Tsaregorodtsev, Mazen Ezzeddine +1 more
similarity 0.58
Abstract

The rapid growth of data center electricity demand, accelerated by AI, makes carbon-only accounting an incomplete measure of computing's environmental impact: low-carbon electricity mixes are often water-intensive, and the resulting harm depends on local, seasonal scarcity rather than on the volume of water consumed. We propose the Environmental Score (ES), a unified, dimensionless index in $[0, 100]$ that jointly captures the carbon footprint and the spatial-temporal, scarcity-weighted water impact of the electricity a workload consumes. It combines real-time, cross-border electricity flow tracing with monthly AWARE2.0 water-scarcity characterization factors, weighting global greenhouse-gas emissions together with the local, seasonal severity of water stress. Building on it, we define the Green Score (GS), a scheduling metric proportional to the useful computational work delivered per unit of real environmental impact, which also accounts for data center power and hardware efficiency. We add both metrics as a green-affinity feature to the GreenDirector schedulers of two production federated infrastructures, the AI4EOSC scientific cloud and the DIRAC workload management system. In AI4EOSC, a cluster-filling experiment over four pan-European providers shows that greener sites are filled first without degrading scheduling latency or end-user experience. In DIRAC, a trace-driven simulation of 133,631 jobs and a preliminary production deployment for the KM3NeT community reduce carbon emissions and improve carbon efficiency by about 40\%, while making the carbon-water trade-off explicit when the lowest-carbon site also carries higher water stress. The results show that hydrological stress can be dynamically weighted into workload placement in live, multi-tenant systems

0.19

Measuring Sustainability in Multi-Scale High-Performance Computing

cs.DC ·2026-09-08 ·Carlos J Barrios, Frédéric Le Mouël, Yves Denneulin
similarity 0.57
Abstract

The transition from traditional High Performance Computing (HPC) to the Computing Continuum emphasizes efficient resource management and sustainable practices across Multi-Scale hybrid architectures. This paper introduces a multidimensional metric framework to characterize these systems and guide deployment strategies for modern workloads. The framework combines Architectural Performance metrics (such as Throughput, Latency, Scalability), System Utilization, and key Sustainability and Accuracy indicators (such as Energy Efficiency and Power Consumption). Using a modular hybrid testbed, experiments reveal complex relationships among metrics, especially the trade-offs between accuracy and energy, and the efficiency of hybrid nodes. The guidelines help identify optimal operating points and lay the groundwork for improving orchestrators and schedulers (e.g., Kubernetes) to assign demanding applications, including AI and Quantum Computing, to suitable system modules, ensuring high performance and sustainability.

0.31

A Co-Simulation Platform Coupling Land Use, Transportation, and Building Energy: Development and Case Study

cs.CE ·2026-08-25 ·Gopindra Sivakumar Nair, Yilin Jiang, Samuel Maurer, James Cook, Nazmul Arefin Khan +4 more
similarity 0.57
Abstract

Land use, transportation, and building energy shape one another, yet urban-scale studies typically model each sector in isolation. We present a co-simulation platform that couples the UrbanSim land-use model, the POLARIS agent-based transportation model, and the CityBES urban building energy model into a single integrated workflow, with POLARIS travel skims driving land use and POLARIS agent activities driving dynamic building occupancy. We demonstrate the platform with forecasts through 2045 for the Chicago metropolitan area under a business-as-usual case, a high-telecommuting scenario, and a mileage-based user fee scenario. Both policies produced expected-direction responses that emerged from the model feedbacks rather than being imposed. Telecommuting decentralized activity toward outlying areas and cut 2045 vehicle miles traveled by 12.5%, whereas the mileage fee recentralized activity toward the urban core and cut it by 2.9%. Comparing coupled runs against uncoupled runs that hold land use fixed shows that the land-use feedback contributes over one percentage point to the county-level travel effect in several counties, large relative to the policy effect itself since the mileage fee's county-level effects are only about three percent, so a transportation-only study would materially misstate the sub-regional impact. Both policies raised citywide building energy by about 1%. This is the first platform to integrate land use, transportation, and building energy simultaneously, replacing predefined occupancy schedules and static building stocks with endogenous agent-based occupancy and a forecast-driven building stock. It lets planners evaluate transportation and pricing policies for their joint land use, travel, and energy consequences, and its component models rely on nationally available data, making the approach transferable given local building-stock and calibration data.

0.23

Embodied Emissions of 2.5D and 3D Scaling in Chipletized GPUs for Low-Carbon AI

cs.AR ·2026-10-23 ·Hannah Watson, Arjun Singh, Jennifer Stephenson, Job Soethoudt, Jonas Svedas +2 more
similarity 0.57
Abstract

GPU compute resources are scaling to support growing AI workloads, leading to further rises in the climate change impact of hyperscale data centers that rely on high-performance GPUs. To model how packaging decisions impact the carbon footprint we have estimated the embodied emissions (EE) of a chiplet-based GPU that has been scaled in 2.5D and 3D using the imec.netzero modelling platform. We doubled the number of compute units and high bandwidth memory (HBM) capacity in the 2.5D and 3D scaled systems and found that 3D scaling results in an 89% increase in EE, as compared to an increase of 141% for 2.5D scaling, positioning 3D scaling as an attractive solution to limit the embodied emissions due to GPU scaling.

0.27

Green500: Adventure in Qualifying a Cluster

cs.DC ·2026-11-06 ·Nicolas Richart, Xavier Ouvrard, Julia Paolini, Manuel Cubero-Castan, Gilles Fourestey
similarity 0.56
Abstract · submitted to EESP Workshop 2026

Energy effciency has become a key metric for evaluating High Performance Computing (HPC) systems, as reflected by the Green500 ranking. However, energy effciency alone does not capture the full environmental impact of an HPC cluster. Using the Kuma cluster at EPFL, we report on two Green500 measurement campaigns at Level 2 and Level 3, and extend this analysis to a full carbon footprint assessment using the MITSI life-cycle based methodology. GPU power capping experiments show that energy effciency peaks at 450 W, achieving an 11% performance loss offset by a 20% reduction in energy consumption. When embodied emissions are accounted for, the optimal power cap for carbon effciency shifts to 500 W under Switzerland's low-carbon electrical grid, revealing a tension between minimizing usage and embodied contributions. We discuss the challenges of generalizing this approach into a broader carbon-based HPC ranking, and argue that moving beyond energy effciency is both necessary and feasible.

0.20