CS Paper Radar

Algebraic Characterization of Time-Varying Set Invariance

S. B. Alaoui, E. J. Wafo Wembe, A. Saoud

eess.SY ·submitted 2026-11-02 16:00 UTC · v1
publishedtheory

Abstract

The verification of temporal forward invariance for dynamical systems subject to time-varying constraints is a foundational problem in the analysis of safety-critical systems. Existing methodologies rely on restrictive geometric assumptions, such as the Linear Independence Constraint Qualification (LICQ), or suffer from exponential computational complexity when applied to time-varying polytopes. This paper establishes a rigorous, unified, and computationally tractable framework for temporal safety verification. First, utilizing tools from nonsmooth analysis, we prove that a Nagumo-type geometric inclusion evaluated strictly on the boundary of the augmented graph is both necessary and sufficient for temporal forward invariance. Second, we provide an algebraic characterization of this condition requiring only the weaker Abadie Constraint Qualification (ACQ), generalizing standard Control Barrier Function (CBF) boundary conditions to non-smooth, multi-constraint domains. Finally, for the practical class of Linear Time-Invariant (LTI) systems with time-varying polytopic constraints, we deploy Farkas' Lemma to eliminate exponential vertex enumeration. By introducing a Lipschitz-bounded time-discretization scheme, we reduce the infinite-dimensional continuous-time verification problem to a finite, highly tractable set of decoupled Linear Programs (LPs).

Comment
The paper was accepted for publication in the CDC 2026

Closest papers

Nearest neighbours by meaning across the whole index.

On the Degree of Safety: Beyond Safe or Unsafe with Control Barrier Functions

eess.SY ·2026-09-03 ·Ruoyu Lin, Fabio Pasqualetti, Magnus Egerstedt
similarity 0.63
Abstract

A valid control barrier function (CBF) certifies if its represented safe set can be rendered forward invariant, and the sign of its value indicates whether a state is safe or not, but it does not quantify a degree of safety beyond the binary indication. In this paper, we show that among valid CBFs representing the same safe set, interior values and gradients can be changed arbitrarily, so neither quantity determines a degree of safety that is independent of how the set is represented. We also show that whether a candidate CBF-based inequality constraint is feasible does not by itself quantify a degree of safety. In particular, infeasibility can occur either because the safe set is not controlled invariant or because the candidate CBF representation fails. This motivates our distinction between intrinsic and representational infeasibility. Finally, we introduce the invariance authority demand (IAD), a representation-independent degree of safety that quantifies the control authority required for maintaining safety and can be used to guide actuator redesign or safe set repair.

0.28

Safe Control of Semi-Explicit Differential-Algebraic Systems: Control Barrier Functions with SOS Verification

eess.SY math.OC ·2026-10-07 ·Mohamad H. Kazma, Hongchao Zhang, Abdallah A. Albustami, Ben Wooding, Meiyi Ma +2 more
similarity 0.62
Abstract

Differential-algebraic equation (DAE) systems arise in power networks, multibody mechanics, and chemical processes, where algebraic constraints couple dynamic and algebraic states. Standard control barrier function (CBF) methods, designed for ordinary differential equations, fail for DAE systems because the algebraic constraints impose compatibility requirements that may render safety filters infeasible. This paper develops a safety-critical control framework for semi-explicit DAE systems using CBFs that consider compatibility with the algebraic constraints, termed DAE-aware CBFs. We construct projected vector fields on the constraint manifold to account for the hidden dynamics, while ensuring compatibility conditions that keep the algebraic constraints satisfied. We then present sum of squares (SOS) verification conditions that certify both correctness and feasibility of the resulting DAE-aware CBF. The framework is validated on power system case studies.

0.46

Hamilton-Jacobi Reachability for Hybrid Systems: Unified Goal-Driven Control with Safety Guarantees

cs.RO eess.SY ·2026-09-15 ·Javier Borquez, Shuang Peng, Somil Bansal
published similarity 0.61
Abstract

Hybrid dynamical systems provide a powerful modeling framework for robotic systems, particularly in contact-rich environments. However, ensuring safety and performance in such systems remains challenging due to the intricate coupling between continuous dynamics and discrete mode transitions. In this work, we extend classical Hamilton-Jacobi (HJ) reachability analysis, a formal verification method for continuous-time nonlinear systems, to hybrid dynamical systems. Our framework characterizes safe sets for hybrid systems through a generalized value function defined over both discrete and continuous states while accounting for control constraints and model uncertainty. We additionally provide a numerical algorithm to compute this value function. Building on these safe sets, we propose two different mechanisms to integrate performance objectives. First, we introduce a hybrid least-restrictive safety filter that intervenes on both the discrete and continuous components of a nominal controller only when necessary to avoid unsafe states, thereby preserving nominal behavior whenever possible. Second, we formulate and compute hybrid backward reach-avoid tubes, enabling the simultaneous enforcement of safety and goal-reaching behavior, an extension not previously addressed within hybrid HJ reachability. This enables the synthesis of continuous and discrete control policies that guarantee both safety and task completion. We validate our framework through simulation studies and real-world experiments on a quadrupedal robot, demonstrating its effectiveness in hybrid mode planning and safety-critical applications.

0.60

Feasibility of Simultaneous Input-Output Constraints for Tracking in a Class of LTI Systems: Part I

eess.SY ·2026-10-01 ·Junhyeok Yoon, Heather Hussain, Anuradha M. Annaswamy
similarity 0.60
Abstract · 14 pages, submitted to ACC 2027; v2: revised abstract, added the arXiv number of the companion paper (Part II, arXiv:2610.04742)

This paper addresses simultaneous input and output constraint satisfaction for a class of multi-input linear time-invariant systems with state feedback and integral action. A control barrier function (CBF)-based governor modifies the reference command while preserving the nominal feedback controller. Necessary and sufficient conditions are derived under which the governor is feasible at every state of a prescribed operating set and ensures simultaneous input and output constraint satisfaction, forward invariance, and bounded closed-loop solutions. The paper also shows that these conditions need not be met for certain choices of the CBF governor parameters due to conflicts between input and output constraints. A systematic design procedure is proposed that first searches for feasible free parameters and, if necessary, proposes a relaxation in the input constraint that restores feasibility. A companion paper provides numerical examples and counterexamples illustrating these results.

0.38

A Geometric Decision Procedure for STL Feasibility and Repair

eess.SY cs.RO ·2026-09-19 ·Avinash Malik
theory similarity 0.60
Abstract · 11 pages, 2 figures

Feasibility of a Signal Temporal Logic (STL) specification asks whether, from a given initial state, an admissible control input can satisfy its continuous-time requirements under actuator limits. Establishing feasibility is essential for detecting unrealizable tasks and repairing specifications before execution. State-of-the-art Mixed-Integer Linear Programming (MILP) methods face growing model sizes as temporal horizons and formula complexity increase, and can accept control witnesses that violate continuous-time STL semantics between samples. We propose a geometric approach to STL feasibility and temporal repair that translates temporal requirements into spatial constraints evaluated at the initial state. Its compiled feasibility check is independent of horizon length for fixed compiled dimensions. We prove nonnegative continuous robustness under a joint controller assumption. On 6D UAV benchmarks, median geometric repair times are 0.265--1.510 ms; we show up to 1.68x10^4 speedup over MILP feasibility checker. All geometric runs pass continuous STL validation, whereas majority of completed MILP control witnesses violate continuous-time STL.

0.27

Time-Invariant Control Barrier Functions for Bounded STL Safety

eess.SY ·2026-08-28 ·Avinash Malik
theory similarity 0.60
Abstract · 6 pages, 3 figures

Enforcing finite-time persistence specifications in Signal Temporal Logic typically requires formulating Control Barrier Functions within an extended state-time space. This introduces strict mathematical assumptions on global clock synchronization, rendering multi-agent execution brittle under asynchronous network delays, clock skew, and non-monotonic jitter. In this paper, we prove that for bounded-time safety tasks, explicit time dependency can be mathematically eliminated for general continuous-time nonlinear systems. By leveraging the reciprocal integral of worst-case system dissipation, we systematically compile temporal specifications into static, lower-dimensional spatial invariants. We formally prove that this time-invariant realization is strictly sound, removes the need for heuristic time-varying envelope tuning, and guarantees robust forward invariance even under severe network desynchronization.

0.18

Convex Safety Filtering via Spectral Selection for Nonconvex Safe Sets

eess.SY math.OC ·2026-10-08 ·Juan Augusto Paredes Salazar, James Usevitch, Ankit Goel
theory similarity 0.60
Abstract · 7 pages, 3 figures, submitted to the ACC 2027

The discrete-time control barrier function condition for a safe set that is a union of convex sets is nonconvex in the control input. For safe sets defined by a matrix concave function through the number of its nonnegative eigenvalues, this paper shows that the set is a union of convex sets, and that the nonconvexity arises because at least one member of the union must hold, not every member. Selecting eigenvectors of the matrix function at the current state yields a convex input constraint that acts only on the eigenvalues determining membership in the set. This constraint is implied by the matrix-wide condition of prior work, and it guarantees a geometric lower bound on each of those eigenvalues along closed-loop trajectories. A double-integrator simulation with a polytope obstacle and a spectrahedron obstacle compares the proposed filter with the matrix-wide condition.

0.25

Verifying Control Invariance of H-Polytopes is coNP-Complete

eess.SY math.OC ·2026-10-27 ·Mario Eduardo Villanueva, Boris Houska
theory similarity 0.60
Abstract

We prove that verifying whether an H-polytope is control invariant for a discrete-time linear system with polytopic input constraints is \textsc{coNP}-complete. This establishes a fundamental computational complexity barrier for set-theoretic control. As an immediate consequence, the exact computation of maximal control invariant subsets of H-polytopes is \textsc{coNP}-hard. These hardness results hold regardless of whether the input constraint set is given in H- or V-representation.

0.28