CS Paper Radar

OpenZilo: An Open Smart-Ring Platform for Human-Centric Sensing and Interaction with Robots

Qianggang Ding, Xingyao Wang, Rui Feng, Chi Qin, Weijian Lin, Lizhi Ding, Jiankai Tang, Yuntao Wang, Xiangke Liu, Bang Liu

cs.RO cs.HC ·submitted 2026-11-02 16:36 UTC · v1

Abstract

Wearable robot interfaces must connect user input to timely physical action. We present the proposed platform, an open smart-ring platform for studying this connection across task stages. The ring integrates a microphone, an inertial measurement unit, photoplethysmography, and skin-temperature sensing. Its software architecture separates acquisition, event interpretation, interaction policy, and robot execution. We characterize seven operating modes and evaluate speech and gesture control with 10 participants. Across five commands and 250 trials per modality, speech and gestures achieved task success rates of 90.4% and 88.8%, respectively. Recognition accuracy exceeded task success for both modalities. Gaussian hidden Markov models achieved higher accuracy than a support vector machine across three vocabulary sizes, with longer scoring times. Following a shared spoken task start, gesture-based adjustments had shorter median response times than speech. Whole-task success was 70.0% with gestures and 64.0% with speech. We further examine physiological-event-triggered robot interaction using simulated event notifications. Mean notification-receipt-to-arrival times were 11.71 s for the robot and 9.20 s for an on-site person. These descriptive findings support evaluating wearable robot interfaces through both recognition and physical outcomes, with timing measures appropriate to each task stage.

Comment
17 pages, 5 figures, 8 tables

Closest papers

Nearest neighbours by meaning across the whole index.

PhoneBot: A Low-Cost Open Humanoid Robot Platform Reusing Smartphones

cs.RO ·2026-10-06 ·Ruochen Hou, Quanyou Wang, Daniel Koh, Dennis W. Hong
code/data similarity 0.63
Abstract

The adoption of humanoid robots in education and research remains limited by high hardware costs, complex sensing systems, and substantial computational requirements. This paper presents PhoneBot, a low-cost, open-source humanoid robot platform that repurposes commodity smartphones as its primary sensing and computing unit. By using a smartphone's integrated inertial measurement unit (IMU), camera, wireless connectivity, and onboard processing capabilities, PhoneBot reduces hardware costs and simplifies the system architecture. The robot combines a modular lower-body structure driven by 13 low-cost actuators with a torso-mounted smartphone that supports perception, control computation, and user interaction. We describe the mechanical design, software architecture, and real-time communication framework that support stable locomotion and capabilities including vision-based human following, conversational interaction, filming, and mobile telepresence. Experimental evaluations demonstrate reliable walking, perception-driven interaction, and straightforward deployment using off-the-shelf consumer smartphones. With fully open-source hardware and software designs, PhoneBot provides an affordable, reproducible platform for education, research, and rapid prototyping. More details are available at https://phonebot.dev.

0.44

ExoStack: A Modular and Reconfigurable Software Framework for Wearable Robotics Using ROS 2

cs.RO ·2026-11-09 ·Debadrata Sarkar, Upamanyu Ray, Soumen Sen, Aman Arora
code/data similarity 0.63
Abstract · The source code and accompanying documentation website for ExoStack are publicly available at https://github.com/debadrata/ExoStack and http…

Wearable robots depend on a software chain that links body-worn sensing to gait interpretation, assistance generation, and actuation. Personalization further requires each measured response to remain associated with the assistance parameters that generated it. This paper presents ExoStack, a modular ROS 2 framework for implementing that chain across embedded hubs and a host computer. Its Embedded Sensing and Actuation (ESA) library configures ESP32 boards as microROS sensing and actuation hubs. ExoCore supplies multi-hub synchronization, gait-event detection, profile generation, motion planning, cost evaluation, and human-in-the-loop (HIL) optimization as configuration-instantiated nodes. The PASE desktop application edits configurations, launches the processing stages, and visualizes ROS 2 topics. Hardware drivers and algorithm plugins can be added through defined interfaces without modifying the generic processing nodes. We characterize hub and planner timing on three embedded computers and demonstrate reuse on two pneumatic exosuits.

0.43

VoiceGuard: An Audio-Native LLM-VLA Pipeline for Wheelchair-Mounted Assistive Manipulation

cs.HC ·2026-11-15 ·Bang Xiao, Rodolfo Cossovich
similarity 0.61
Abstract

Wheelchair-mounted robotic arms can help people with limited upper-limb mobility reach and manipulate everyday objects, but operating them typically requires stepwise joystick control and frequent mode switching. Natural-language interfaces could let users express task-level goals, yet they must handle ambiguous requests, distinguish commands from nearby conversation, and support interruption. We present VoiceGuard, a voice interface that separates spoken intent from robot execution through structured request validation and a local stop mechanism. On-device detectors handle the wake phrase and stop commands, an audio-native large language model (LLM) routes each request into a structured function packet, a rule-based ToolDispatcher accepts, rejects, or clarifies the packet, and a SmolVLA vision-language-action (VLA) policy executes accepted tasks on a low-cost SO-101 arm. Preliminary tests showed that the system correctly handled 55 of 60 voice commands, including ambiguous and non-directed utterances, completed 16 of 20 deliveries, and stopped the arm on all 20 stop commands with a median latency of 210 ms. We demonstrate the feasibility of combining flexible spoken input with constrained task execution and local interruption for wheelchair-mounted assistive manipulation.

0.29

AffectiveVLA: Safe and Intent-Aware VLA Control for Human-Humanoid Social Interaction

cs.RO ·2026-11-05 ·Nikita Kuzmin, Georgii Demianchuk, Mariya Lezina, Yara Mahmoud, Iana Zhura +2 more
similarity 0.61
Abstract

Social touch interactions, such as handshakes, fist bumps, and hugs, require humanoid robots to infer human intent, generate contact-rich motions, and maintain safe physical contact. We present AffectiveVLA, an intent-gated Vision-Language-Action (VLA) pipeline deployed on a Unitree G1 humanoid with dexterous hands. A lightweight RGB-based model recognizes interaction intent from two onboard cameras and converts it into a language prompt for the VLA policy. Low-confidence predictions suppress motion execution, reducing unintended activations. During physical contact, interaction-specific compliance profiles adjust arm impedance, while an independent voice-triggered mechanism initiates a latched safe-stop procedure. Using VR teleoperation, we collected approximately 1,300 multimodal interaction episodes and fine-tuned four VLA models: GR00T, RLDX-1, Being-H0.5, and UnifoLM-VLA-0. On-robot evaluation identifies GR00T as the best-performing standalone model. Integrating intent recognition increases its macro-F1 score from 0.75 to 0.90, while the intent model achieves a p95 inference latency of 6.27 ms. These results demonstrate that explicit intent gating improves the reliability of VLA-based social interaction without compromising real-time operation.

0.11

Development of a Humanoid Robot Prototype for Multimodal Human-Robot Interaction

cs.RO ·2026-09-04 ·Thang Tran Viet, Thanh Nguyen Canh, Huy Uong Gia, Phuc Dinh Van, Son Tran Duc +2 more
published similarity 0.61
Abstract · 6 pages, 6 figures. Published in the 2025 RIVF International Conference on Computing and Communication Technologies (RIVF 2025)

Human-robot interaction (HRI) enables intuitive and intelligent collaboration between humans and robots in real-world environments. This paper introduces a humanoid robot prototype designed as a flexible testbed for developing and integrating artificial intelligence (AI) modules in HRI tasks. The system features a 12 degree-of-freedom (DOFs) dual-arm mechanism and a 2 DOFs head with an expressive LCD screen to express facial emotions. All hardware components are controlled by a custom-designed controller board with real-time AI processing supported by an onboard Jetson module. The system incorporates three AI modules: (1) gesture recognition using MediaPipe Pose and an LSTM classifier, (2) object detection with YOLO and 3D localization, and (3) voice-command processing through speech recognition and large language model(LLM)-based semantic parsing. The platform is validated through experiments on positioning accuracy, with results showing average manipulation errors of approximately 1.83 cm. To demonstrate its versatility, experimental results show over 90% task accuracy, with gesture recognition reaching 96%, speech recognition reaching 92%. The results confirm the effectiveness of the proposed system as a reproducible and accessible humanoid platform for research and prototyping in HRI.

0.25

Co-Speech with You: Training-Free Personalization of Robot Co-Speech Gestures

cs.RO ·2026-09-12 ·Bosong Ding, Selma Ancel, Giacomo Spigler, Murat Kirtay
similarity 0.60
Abstract

Personal robots should adapt their co-speech gesture style to a new user without requiring model retraining. We present a training-free personalization pipeline that combines a frozen audio-conditioned diffusion prior with a gesture style encoder and lightweight conditioning adapters. The encoder is first trained to discriminate speaker identities and then jointly refined with the adapters using the diffusion objective, enabling a reusable style embedding to be extracted from approximately 10 seconds of enrollment motion through a single forward pass. To support this setting, we also release a Quest~3 capture application and a dataset of spontaneous co-speech motion from ten participants. We evaluate the system on held-out speakers using Style Recognition Accuracy (SRA) and Fr'echet Gesture Distance (FGD) to measure personalization and motion quality. Our approach improves SRA from 27.6\% for the frozen prior to 69.5\% while preserving motion quality (FGD 34.2 versus 34.8), and replacing the enrollment embedding with another person's reduces SRA to 11.4\%. The generated gestures are retargeted to a physical NAO robot, and this improvement also transfers to the robot deployment setting, where speech is synthesized using five TTS voices, retaining 67.3\% SRA.

0.43

Online Multimodal Workload Assessment in Contact-Rich Physical Human-Robot Interaction

cs.RO ·2026-09-16 ·Yanyi Chen, Fan Yang, Min Deng
similarity 0.59
Abstract

Contact-rich physical human--robot interaction (pHRI) imposes time-varying demands associated with physical interaction, motor regulation, and physiological response, motivating continuous assessment of interaction workload. This paper presents an online multimodal assessment framework that integrates interaction wrench, planar tool-center-point (TCP) kinematics, and skin conductance level (SCL) into four interpretable workload-related factors. Their relative contributions are adjusted using path curvature to reflect changes in motion demand and task progression to account for gradual physiological variation over time. The framework was evaluated with 24 participants across 18 controlled combinations of temperature, acoustic noise, and illuminance under two admittance-control modes. Strict leave-one-subject-out (LOSO) evaluation used standardized pupil diameter ($\mathrm{PD}_z$) as an independent physiological reference and included comparisons with static variants and representative state-of-the-art learning-based baselines. The proposed framework achieves a cohort-mean $30\,\mathrm{s}$ block-wise Spearman correlation of $ρ_{30}=0.308$ with the physiological reference, with positive subject-level correspondence in 23 of 24 participants. Its overall performance is comparable to the state-of-the-art learning-based baseline. At the same time, our framework keeps the assessment process transparent through explicit workload-related factors and defined weighting rules, while outperforming the corresponding fixed-weight formulation. The framework also maintains consistent performance across the two tested admittance-control modes. These results support a transparent and interpretable approach to continuous interaction workload assessment in contact-rich pHRI.

0.30

Towards an Extensible Benchmark for Spoken Dialogue with Social Robots

cs.RO ·2026-10-06 ·Casey Kennington, Ross Mead, Saad Elbeleidy, Jesse Thomason
publishedbenchmark similarity 0.59
Abstract · Accepted to and presented at the IROS 2026 Workshop on Human-Robot Dialogue

Language models provide a plug-and-play interface between humans and robots, but important challenges remain when speech, dialogue, fast interaction, and collaboration are required. We propose a benchmark for the community to use as a way to explore common spoken dialogue artifacts between robots and humans, including requests for clarification, interruptions, embodied signals (e.g., head nods or facial cues), and time constraints. We also explain our vision to extend the benchmark for other aspects of human-robot interaction that are important to the larger research community. To facilitate the benchmark, we further propose using \textit{Retico}, a real-time communication framework that fulfills important technical requirements to enable robots to have spoken dialogue capabilities.

0.20