CS Paper Radar

mmHand: Toward Pixel-Level-Accuracy Hand Localization Using a Single Commodity mmWave Device

Xiaoyu Zhang, Zhengxiong Li, Chenhan Xu, Luchuan Song, Huining Li, Hongfei Xue, Yingxiao Wu, Wenyao Xu

cs.CV ·submitted 2026-10-20 04:44 UTC · v1
published

Abstract

The hand localization problem has been a longstanding focus due to its many applications. The task involves modeling the hand as a singular point and determining its position within a defined coordinate system. However, due to data modality limitations, existing hand localization technologies face several challenges. For example, vision-based localization raises privacy concerns, while wearable-based methods compromise user comfort. In this paper, we introduce mmHand, a new device-free, privacy-preserving dynamic hand localization system with pixel-level accuracy, using a single commodity mmWave device. We first propose a mmImage generation tool to fully extract spatial information from raw mmWave data and introduce a novel 2D image-format representation of mmWave data. Next, we design a framework that provides a new quality evaluation method and pixel space labeling for the mmWave data. Finally, we present a cross-modality spatial feature-enhanced model with high spatial feature extraction capabilities, which can accurately localize hand positions at the pixel level in the mmWave radar U-V pixel coordinate system. We evaluate the system with experiments on 12 subjects in three scenarios, and the results across four metrics demonstrate the effectiveness of our hand localization system.

Journal ref
IEEE Internet of Things Journal, vol. 12, no. 12, pp. 20800-20814, 2025
DOI
10.1109/JIOT.2025.3546560

Closest papers

Nearest neighbours by meaning across the whole index.

PalmSpace: Towards a Versatile On-Palm Interaction Space through Unified Touch Modeling

cs.HC cs.CV ·2026-10-07 ·Chentao Li, Mingze Gao, Runze Sun, Zhaoguo Wang, Jianjiang Feng +1 more
similarity 0.60
Abstract · Preprint. Initial version

As smart glasses and lightweight MR devices become increasingly practical, input remains a key challenge. The bare palm is an always-available, tactile, and proprioceptively accessible surface, but it has neither an explicit coordinate system nor embedded touch sensing. Prior on-palm systems typically expose isolated touch events, discrete regions, continuous trajectories, or task-specific gestures, limiting the palm's ability to support precise selection and gesture manipulation through a common input representation. We present PalmSpace, a wrist-worn infrared system that exposes mode-aware, body-referenced absolute input on the bare palm without per-user sensing calibration. At the interaction level, PalmSpace jointly represents contact occurrence, interaction mode, and palm-referenced absolute location; at the model level, it learns these coupled outputs through a shared real-time representation. In leave-one-participant-out evaluation with 17 participants, PalmSpace achieved 6.7 mm mean localization error, 98.9% contact detection accuracy, and 96.7% F1 for four-class interaction-state recognition. User studies further demonstrated absolute pointing and dragging, eyes-free digit input, and representative multi-finger controls including scrolling and pinch-based map manipulation. These results show that a morphologically variable bare palm can function as a transferable, mode-aware interaction surface.

0.17

VERA-Hand: A Verified Multidimensional Benchmark for 2D Hand Pose Estimation in Third-Person Dynamic Gesture Videos

cs.CV ·2026-10-23 ·Gibran Benitez-Garcia, Hiroki Takahashi
publishedbenchmark similarity 0.59
Abstract · Accepted to WACV 2027

Hand landmarks serve as input for gesture recognition, sign language understanding, and touchless human-computer interaction. Yet hand pose estimators are typically evaluated with frame-wise localization metrics such as PCK or MPJPE, which are computed over matched predictions and overlook missed or spurious hands, handedness errors, and temporal instability. To address these limitations, we present VERA-Hand, a benchmark that evaluates estimators using manually verified, frame-level 2D annotations for 10,690 hands across four complementary dimensions (detection, localization, identification, and temporal stability), as well as a joint Pose-F1 metric that requires both correct detection and accurate localization. Evaluating six estimators spanning hand-specific, whole-body, reconstruction-based, and foundation-model paradigms, we find that no estimator dominates: rankings reorder sharply across dimensions. VERA-Hand also exposes failures that localization-only and downstream evaluations may not reveal, including cross-hand overlap in over 85% of frames for a recent foundation model. A post-hoc cleanup case study demonstrates how the benchmark can validate corrective interventions, while stratified analyses show that robustness varies across motion-blur classes and hand regions. We release the verified annotations, protocol, and code at https://gibranbenitez.github.io/VERA_Hand/

0.42

mmTherm: Absolute 3D Human Pose Estimation from Low-Resolution Thermal Images and mmWave Radar

cs.CV ·2026-11-17 ·Zhaoxin Chang, Badii Jouaber, Daqing Zhang
similarity 0.59
Abstract

Absolute 3D human pose estimation (HPE) aims to recover both a person's body pose and their global position in 3D space. Privacy-preserving millimeter-wave (mmWave) radar provides distance and direction measurement capabilities, but its sparse point clouds make HPE under-constrained. Low-resolution thermal imaging can provide complementary observations of body direction and structure. However, our evaluation shows that a strong feature-level fusion baseline loses much of its localization and HPE advantage when generalizing to unseen subjects, with radial localization becoming less accurate than a radar-only baseline. Motivated by this finding, we introduce mmTherm, a lightweight framework that explicitly incorporates the complementary geometric properties of thermal imaging and mmWave radar. It combines body structure and joint directions estimated from thermal images with range information from radar to localize the body and reconstruct its 3D pose. Experiments on OctoNet show that mmTherm reduces cross-user absolute joint error by 33% and root localization error by 38% relative to the strongest corresponding baselines, while requiring substantially fewer parameters and less computation at inference.

0.12

HandAnthro: Automated Hand Anthropometry from a Single Image

cs.CV cs.AI ·2026-09-29 ·Fan Zhou, Shuairan Chen, Mengying Zhang, Yulin Wu, Sadegh Jafari +4 more
similarity 0.58
Abstract · 21 pages, including 7 pages of main text and references and 14 pages of supplementary material

Hand anthropometry supports protective-glove design, but existing measurement methods often require trained operators, specialized hardware, or manual landmarking. We present HandAnthro, which estimates 44 projected hand dimensions from a smartphone photograph of a palm-up hand on US letter-size paper. The pipeline reconstructs wrist-occluded paper boundaries for rectification, whitens non-hand pixels, and refines 41 anthropometry-specific landmarks from a fine-tuned You Only Look Once (YOLO) pose model using image-specific geometry and contours. Controlled evaluation comprised 720 captures from 45 held-out participants, each contributing 16 images across two smartphones, two backgrounds, two angles, and two nominal illumination settings. HandAnthro produced complete outputs for 704 captures (97.8%); among these, mean absolute error (MAE) was 3.80 mm per dimension against two trained operators' caliper measurements. Regional MAEs were 2.48 mm for non-thumb fingers, 6.04 mm for thumbs, and 6.17 mm for palm and wrist. In a researcher-assisted mobile-app pilot, automated batch processing returned all 44 dimensions for 260 of 268 retained, researcher-screened firefighter images (97.0%). A descriptive, unpaired comparison with an independent national firefighter reference yielded a mean absolute difference of 2.40 mm across 28 sex-by-dimension group-mean contrasts. These results characterize controlled measurement performance and researcher-assisted field feasibility for future distributed hand-anthropometry studies.

0.37

mmPencil: Toward Writing-Style-Independent In-Air Handwriting Recognition via mmWave Radar and Large Vision-Language Model

cs.HC cs.CV ·2026-10-16 ·Yifan Guo, Zhu Wang, Qian Qin, Yangqian Lei, Qiwen Gan +4 more
publisheddatasethighly cited similarity 0.57
Abstract · Published in ACM IMWUT, Vol. 9, No. 3, Article 81, 2025; presented at ACM UbiComp 2025. 30 pages

In-air handwriting recognition based on radio frequency (RF) signals offers a promising solution for human-computer interaction, yet existing methods are often limited by predefined writing planes, constrained writing styles, and small recognition vocabularies. To address these limitations, we propose m^2VLMs, a modality mapping architecture that bridges millimeter-wave (mmWave) radar sensing and large vision-language models (VLMs), and develop mmPencil, a 3D in-air handwriting word recognition system. mmPencil reconstructs 3D handwriting trajectories from mmWave signals using a multi-stage spatial trajectory reconstruction algorithm and maps them into visual representations through a spatial-to-visual mapping algorithm, enabling VLMs to recognize handwriting while reducing sensitivity to writing styles and environmental factors. We collect and release a 3D mmWave handwriting dataset containing 7,664 samples of 200 words from 12 users across 22 writing scenarios. Extensive experiments demonstrate that mmPencil achieves robust word recognition under variations in writing position, range, angle, speed, size, direction, and user movement. It achieves 97.60% accuracy on 200 word classes for seen users and 92.50% zero-shot accuracy on 50 word classes for unseen users, outperforming state-of-the-art baselines.

0.64

VolCo: Volumetric Contact for High-Fidelity Human Grasp Generation

cs.CV ·2026-10-07 ·Zhuo Chen, Yihua Cheng, Aleš Leonardis, Hyung Jin Chang
top venuebenchmarkcode/data similarity 0.56
Abstract · Accepted to NeurIPS 2026

Accurate contact modeling is fundamental to understanding hand-object interaction, yet existing contact representations are typically restricted to object surfaces and rely on hand-crafted rules to recover contact details, leading to severe penetrations and implausible results. To better exploit the rich detail in motion-capture data, we introduce Volumetric Contact (VolCo), a representation that expands surface points to a set of 3D volumetric grids. VolCo encodes 3D contact that allows precise hand part recovery, and is organized in an inherent hierarchy: local contact details within each volume and global hand geometry across all volumes. Our framework, VolCoDiff, employs two modules to capture local and global features following this hierarchy. For local contact details, we use a 3D variational autoencoder to model the possible hand configurations conditioned on the local object signed distance field (SDF). For global hand geometry, we design a prior-guided diffusion model that learns the distribution of compressed latent features aggregated from the volumetric grids. We evaluate our method on two benchmark datasets and demonstrate state-of-the-art performance in penetration and stability, indicating the capability to generate tight grasps with much less severe penetrations. Our code is available at https://github.com/chzh9311/volco.

0.42

S2HAND: Accuracy-Preservation Trade-Offs for Hand Specialization in Whole-Body Pose Models

cs.CV ·2026-11-07 ·Singyu Muk, Xuanren Song, Kalin Stefanov
code/data similarity 0.56
Abstract · 39 pages, including appendices. Code and models: https://github.com/ronggong000/S2HAND

Unified whole-body pose estimators jointly predict body, face, and hand landmarks, but often degrade on small, blurred, or occluded hands. Attaching a standalone hand specialist introduces extra detection overhead, coordinate alignment, and wrist-stitching artifacts. We introduce S2HAND, a hand-specialized Sapiens2-5B framework that preserves the native 308-keypoint output interface. Specifically, S2HAND-MT adapts a lightweight 0.87M-parameter pose branch to route 40 finger heatmaps while strictly preserving the shared Transformer, auxiliary task heads, and the other 268 body, foot, and face heatmaps. S2HAND-Pose further fine-tunes three Fisher-selected Transformer blocks (267.13M parameters), trading exact preservation for stronger hand recovery: it lifts macro AUC from 57.83% to 65.73% across HInt TEST, COCO WholeBody VAL, and FreiHAND EVAL, and surpasses HInt-adapted Hand5/HRNet and stitched Hand5 systems on all five Native Pipeline benchmarks. On COCO, S2HAND-Pose improves hand AP by 12.89 points and body-plus-foot AP by 0.19 points. Across a 512-image multi-task audit, it maintains 99.60% foreground segmentation agreement with the public checkpoint, with quantified normal and pointmap drift. Its 2D coordinates also lower 3D mesh error in frozen Pose2Mesh transfer, while our optional TailGuard re-cropping module cuts S2HAND-MT's severe failure rate on NewDays from 13.45% to 10.43%. S2HAND thus resolves the whole-body hand bottleneck with either exact non-hand preservation (MT) or empirically audited trade-offs (Pose).

0.33

VACO: Vertex-Aligned Decoding for Dense Hand Contact Estimation from a Single Image

cs.CV ·2026-11-13 ·Binhong Ye, Jin-Chuan Shi, Tao Liu, Xin Wang, Hao Chen +1 more
similarity 0.56
Abstract

Dense hand contact estimation from a single RGB image is a foundational primitive for dexterous manipulation and 3D interaction analysis. Direct predictors typically decode the entire per-vertex contact map from one shared query, leaving individual vertices ungrounded in the image and smearing contact across adjacent, non-touching surfaces. We present VACO, a vertex-aligned decoder in which each MANO vertex samples local image features at its projected location. A hand-reconstruction backbone, jointly trained for reconstruction and contact, predicts these locations at inference without an auxiliary reconstructor. Training uses noise-perturbed ground-truth projections and end-to-end feature adaptation to improve robustness and contact-sensitive features. A single VACO checkpoint sets a new state of the art on five benchmarks spanning hand-object, hand-human, hand-scene, and bimanual interactions. It improves F1 by +20.7 pp over the strongest prior direct predictor on Hi4D and generalizes to the held-out HOT3D and HOCap, with gains of +5.5 and +2.7 pp. The resulting contact predictions also improve downstream HOI reconstruction.

0.06