CS Paper Radar

SenTrojan: Revealing Analog Hardware Trojan Attacks on Sensors

Kun Wang, Ruochen Zhou, Wenjun Zhu, Shilin Xiao, Kai Wang, Chen Yan, Xiaoyu Ji, Wenyuan Xu

cs.CR ·submitted 2026-11-04 07:45 UTC · v1
top venue

Abstract

Sensors bridge the physical and digital worlds, making their integrity critical to cyber-physical system security. Existing sensor attacks largely exploit unintended and sensor-specific physical vulnerabilities, limiting their generalizability and motivating a different threat model, i.e., whether an adversary can implant hidden attack surfaces into sensors before deployment. In this paper, we present SenTrojan, an analog hardware Trojan framework for sensors. SenTrojan embeds malicious functionality into analog signal circuitry commonly shared across diverse sensor architectures, and activates the hidden behavior through crafted external physical signals. Once activated, SenTrojan can induce sensor malfunctions ranging from permanent denial-of-service to static or dynamic spoofing. To achieve these effects under different architectural constraints, we introduce two complementary designs. The Logic-Rule-Driven (LRD) Trojan adds lightweight analog monitoring logic to detect trigger features such as frequency and amplitude, enabling reliable activation across various sensor types. The Physical-Effect-Driven (PED) Trojan targets sensors with exploitable native analog effects, e.g., nonlinearity and rectification, and realizes attacks with minimal component insertion. We evaluate SenTrojan on 14 sensors spanning 6 transduction principles and demonstrate its effectiveness across diverse real-world scenarios. Overall, SenTrojan achieves an average successful trigger rate above 95%, maintains over 97% similarity to benign behavior, incurs zero false-trigger rate for LRD designs, and introduces less than 5% average deviation in drift, noise floor, and response time. To our knowledge, this work is the first systematic study of analog sensor Trojans, broadening sensor security from unintended physical vulnerabilities to intentional supply-chain compromise.

Comment
accepted by NDSS 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Exploiting Software-level Abstractions To Support Practical Hardware Trojan Attacks

cs.CR ·2026-09-19 ·Athanasios Moschos, Kevin Valakuzhy, Georgios Kokolakis, Fabian Monrose, Angelos D. Keromytis
similarity 0.66
Abstract

Hardware trojan (HT) attacks against CPUs typically assume threat scenarios where an attacker targeting a system with a trojanized CPU is able to execute arbitrary code (i.e. machine-level instructions) to reliably interact with the implanted trojan. On end-user devices (i.e., mobiles, laptops), achieving arbitrary code execution in practice requires software exploits tailored to each specific target. Such strong adversarial premises reduce the generality of existing threat models casting doubt on CPU trojan attacks as a pragmatic threat vector. To push the envelope on HT attacks against client devices, we introduce the SURF class of CPU-trojans that can be activated without arbitrary code execution. Our key insight is that integer operations expressed in a high-level language can be mapped to microarchitectural side-effects distinguishable by a SURF trigger circuit. This observation unlocks HT activation via runtime engines, constrained environments executing untrusted high-level code. We demonstrate a SURF trojan inside a RISC-V processor and exploit JavaScript-level memory indexing operations inside Google's V8 engine to perform a code injection attack. Importantly, we show that SURF trojans remain effective across multiple JavaScript engine versions, enabling long-term compromise of endpoint devices. To facilitate research, we opensource SURF's design and supporting software.

0.26

NonSense: On the (In)security of FPGA Anti-tamper Sensors

cs.CR ·2026-11-12 ·Mehmet Ali Cetin, Fatemeh Khojasteh Dana, Saleh Khalaj Monfared, Nima Seyed Aghazadeh, Maryam Saadat Safa +1 more
similarity 0.66
Abstract

FPGAs are widely used in mission-critical systems, where a successful physical attack can have serious consequences. This makes resilience to such attacks a critical security requirement. To defend against active physical attacks, such as glitching attacks, modern FPGAs rely on on-chip sensors that detect these disturbances and trigger responses, such as key zeroization, before a device is compromised. These sensors are deployed as both hard-IP blocks and soft-IP cores, and their trustworthiness is often taken for granted. In this work, we challenge that assumption and argue that the sensors themselves are a fragile and underexplored attack surface. Drawing on recent results, we show that both the detection and response mechanisms of state-of-the-art sensors can be bypassed without invasive tampering. We further argue that sensor reliability is reduced by factors rarely captured in threat models, including the spatial and frequency-dependent behavior of the system's power delivery network, which can steer a fault to a target while sparing nearby sensors; environmental conditions such as temperature, which shift detection thresholds; and long-term aging, which drifts sensor calibration and may open silent detection gaps. Finally, we propose a set of countermeasures that harden detection and response mechanisms against these effects.

0.40

SensorGuard-RV: Sensor-to-Register Data Protection for Resource-Constrained RISC-V Devices

cs.CR cs.AR ·2026-11-05 ·Hamid Noori, Carlton Shepherd
hot direction similarity 0.63
Abstract

Embedded systems rely on sensor measurements that traverse a complex hardware-firmware stack (e.g. peripheral interfaces, communication buses, memory, and drivers) before reaching the applications that use them. At worst, an attacker with access to this path may successfully intercept, overwrite, fabricate, or replay readings. This may cause systems that act on such data, such as flight controllers and industrial processes, to behave incorrectly or unsafely. Existing defences, such as trusted execution environments and trusted I/O paths, still depend on trusted driver software and correctly configured access control, which remain fragile in practice. In response, we present SensorGuard-RV, a hardware-first approach that delivers sensor samples into processor registers without trusting intermediate software, buses, or memory. After configuration, a write-once ownership switch hands the sensor to a fixed-function controller that performs hardware-level authenticated encryption on sensor samples under a key inaccessible to software. We develop a new RISC-V instruction then instructs the CPU to decrypt the sample and writes it to a register only after verifying its tag and rejecting replays, including across resets. We implement SensorGuard-RV on the NEORV32 core with an ADXL362 SPI accelerometer on an Artix-7 FPGA. At 100 MHz, a protected sample reaches a register in 5,191 cycles (51.9 $μ$s), of which the two Ascon authenticated encryption engines account for 30. Because fixed-function acquisition removes per-byte software polling, the protected loop sustains 19,015 transactions/s, 5.3% above a software-driven SPI baseline. The added logic (3,155 LUTs and 2,215 registers; 5.0% and 1.7% of the device) is dominated by the Ascon engine and preserves the 100 MHz clock, while estimated power rises from 118 to 368 mW.

0.29

Assessing Runtime Electromagnetic Detection of CPU Hardware Trojans Targeting Kernel Memory

cs.CR ·2026-09-19 ·Athanasios Moschos, Baki Berkay Yilmaz, Kevin Valakuzhy, Angelos D. Keromytis
code/data similarity 0.59
Abstract

Side-channels are a promising approach for hardware trojan detection, as they can passively reveal malicious hardware activity without requiring additional circuitry or destructive analysis of the device under test. This work investigates the use of electromagnetic (EM) emanations for runtime detection of hardware trojan attacks. Using an open-source hardware trojan that implements an arbitrary memory-write primitive, we tamper with the kernel memory of a Linux system running on a RISC-V microarchitecture and perform a real-time baseline detection using the processor's EM emissions. Our results indicate that, under certain conditions, hardware trojans can be detected indirectly through the anomalous software behavior they enable.

0.34

Toward Deployable Hardware Roots of Trust for Edge AI: Software PUFs and Their Trade-offs

cs.CR ·2026-11-02 ·Yilin Li, Farhad Merchant
published similarity 0.59
Abstract · It has been accepted by AsianHOST 2026

Deploying AI at the edge increases the need for security features on existing devices. When physical access to the device is available, storing secret keys in non-volatile memory is vulnerable. Physical unclonable functions (PUFs) address this by exploiting the unique yet repeatable characteristics of each device, but conventional implementations require design-stage modifications, making them inapplicable to a vast number of existing devices already manufactured. Recently, software PUFs have emerged as an alternative approach, leveraging analog characteristics exposed through software-only interfaces to derive unique responses, without post-fabrication changes. Since edge AI hardware is bound to long operational lifespans, this offers clear economic and engineering value. Existing research on software PUFs remains fragmented. It lacks a holistic review of the trade-offs among choices of components used as entropy sources and software methods to expose analog characteristics. This gap hinders assessing feasibility, comparing approaches, and identifying open challenges towards a hardware root of trust in existing devices. This paper surveys 37 existing software PUF works and compares them against the requirements of on-device model protection: boot-time versus runtime key derivation, and response latency. It analyzes trade-offs, outlines four key challenges that current software PUFs face for edge AI deployment, and highlights promising directions for overcoming barriers to real-world adoption.

0.36

Combinatorial Lock for Trojan-Resilient AI Engines via Hash-Assisted Spectral Filtering

cs.CR cs.ARcs.LG ·2026-10-24 ·Soumita Chatterjee, Sudip Ghosh, Tamal Ghosh, Bhargab B. Bhattacharya, Hafizur Rahaman
similarity 0.59
Abstract · 7 pages, 5 figures, 4 tables

Multi-trigger backdoor attacks, in which heterogeneous trigger mechanisms (e.g., patch, blend, warping, and the latent-domain Spy-Watermark) coexist within a single poisoned model, cannot be addressed by existing shortcut-based defenses that assume a single, static attack mechanism. Current multi-trigger remedies (BU+FT, BU+ANP, and BU+ABL) rely on backdoor unlearning, which incurs high training costs and loses effectiveness at low poisoning ratios. This paper proposes Combinatorial Lock, a training-free, reference-calibrated defense that reduces multi-trigger identification to a combinatorial problem over binary activation signatures. This formulation is the key novelty: it yields a multi-trigger defense that is training-free, trigger-oblivious, and directly implementable in hardware, since its decision rules can be evaluated with integer and logic operations. The framework combines anomaly-gated spectral scrubbing, which removes the malicious subspace only from inputs identified as anomalous, with a hash-compressed combinatorial signature verified by an ensemble of detection experts, including a compound-attack-aware expert for multi-trigger inputs. A joint threshold-shrinkage search identifies an operating point ($τ$ at the 97.1st percentile, $γ= 0.78$) that reduces the attack success rate (ASR) to as low as 0.1% while preserving 97.8% clean accuracy. Evaluation on six models (ResNet18, VGG16, MobileNet, AlexNet, ViT-Small, ViT-Base) shows strong generalization: near-100% ASR drops to single digits across poisoning rates of 1-10% and 1-9 simultaneous triggers, with only gradual degradation in clean accuracy. ASIC and FPGA implementations confirm practicality, adding a consistent 19-20% latency overhead across all evaluated architectures and establishing Combinatorial Lock as a hardware-native approach to multi-trigger backdoor mitigation.

0.25

Enhancing Edge AI System Security with a Stacked Hardware Security Controller for Robust and Energy-Efficient Anomaly Detectio

cs.CR cs.ET ·2026-10-31 ·Carl Benda, Eren Kurshan, Paul Franzon
similarity 0.59
Abstract · IEEE 3DIC Conference

In recent years, the growing adoption of Edge AI systems has been accompanied by a surge in security threats. Edge AI deployments face an rapidly evolving spectrum of security threats, from side-channel information leakage to ad- versarial model manipulation and physical device tampering. Conventional security mechanisms such as malware scanners and resource-intensive firewall solutions are unsuitable due to edge AIs typically limited computational resources, strict energy budgets and thermal constraints especially in battery-powered and field-deployed environments. This paper proposes a stacked, hardware-based security mechanism that enables low-overhead, continuous detection of anomalous execution patterns. Anomaly detection utilizing hard- ware performance counters and physical sensors outperforms software-based alternatives by providing key capabilities such as tamper-resistant root-of-trust isolation, negligible runtime overhead, and resilience against compromised operating systems. Experimental analysis shows that adversarial or malicious ap- plications produce observable deviations in sensor and thermal readings on Edge AI systems and hardware-based anomaly detection provides effective and low-overhead anomaly detection.

0.13

Towards Model-based Run-time Cybersecurity: On Control-Flow Anomaly Detection, Attack Identification, and Hardware Monitoring

cs.CR cs.AI ·2026-08-12 ·Martin Sachenbacher, Martin Leucker, Alexander Weiss, Aliyu Tanko Ali
similarity 0.59
Abstract · 14 pages

Methods to increase the resilience of systems to cyber-attacks become increasingly important. Control-flow monitoring provides a principled basis to ensure integrity and detect possible anomalies at run-time. Once anomalies have been detected, so-called attack trees can be used to identify possible types of attacks. However, this approach is vulnerable to camouflage, by which attackers try to evade detection (and correct identification) by deliberately manipulating also the system's observed control flow. In this paper, we outline a model-based approach that provides more robust intrusion detection and attack identification through an architecture that combines software- with hardware-based monitoring. In this approach, software-level observation indicates suspicious activities, while hardware-level monitoring checks them separately in more detail, making it much harder for attacks to camouflage themselves and go undetected. We illustrate the approach with an authentication-service example that captures a realistic failure mode: a software-level observer sees an anomalous but apparently harmless control-flow deviation, maps it to a benign root cause in an attack tree, but misses the true intrusion. A second, independent hardware control-flow monitor observes the actual transition sequence and thereby changes the attack-tree diagnosis from a low-severity configuration or maintenance issue to a high-confidence code-injection or control-flow hijack. In this scenario, the proposed combination of control-flow anomaly detection, attack-tree based intrusion identification, and hardware-based monitoring can improve not only anomaly detection, but also the diagnostic precision of attack-tree-based cyber-attack identification.

0.10