CS Paper Radar

Corridor-Based Monitoring and Emergency Braking Decision for Automated Vehicle Safety

Junnan Pan, Vladislav Nenchev, Mohak Mansharamani, Prodromos Sotiriadis, Ferdinand Englberger

cs.RO eess.SY ·submitted 2026-11-04 10:24 UTC · v1

Abstract

This paper addresses emergency-braking decisions for a redundant safety channel in automated vehicles. The channel is responsible for identifying hazards from sensor data and determining whether braking is necessary, given the constrained computational resources of embedded hardware. We present an emergency-braking approach that uses a predicted motion corridor to filter \ac{lidar} measurements and then decide whether the ego vehicle must brake. \ac{pmcm} constructs a curvature-aware boundary from the planned path and vehicle geometry so that the monitored region contains the full swept body on both straight and curved paths. \ac{gdeta} then decides whether the ego vehicle must command an emergency brake for objects inside this boundary, scoring geometric occupancy and temporal urgency independently. Hard gates permit braking when either source is conclusive; soft-OR arbitration combines partial evidence when neither gate is active. Consecutive-scan confirmation reduces sensitivity to transient measurement noise. Corridor coverage is evaluated in controlled collision simulations and recorded campus driving. Braking decisions are evaluated in Monte Carlo simulations of lead-vehicle braking and transverse-crossing encounters.

Comment
Submitted to a Springer Nature journal for peer review as an extended version of a paper presented at VEHITS, for consideration in the Special Issue

Closest papers

Nearest neighbours by meaning across the whole index.

Dual Stress: Runtime Safety Monitoring for Safety-Constrained MPC Navigation

cs.RO ·2026-08-11 ·Jamil Chahine, Wenqi Cai, John Abanes, Anthony Tzes
similarity 0.63
Abstract · 6 pages, 4 figures, 2 tables, submitted to the 13th International Conference on Automation, Robotics and Applications (ICARA 2027)

Runtime hazard monitors for autonomous naviga- tion are conventionally built from geometric quantities: predicted clearance, time to collision, and required deceleration. A model-predictive controller that enforces safety through explicit con- straints computes, as a by-product of every control step, a second information channel that such monitors ignore: the Karush-Kuhn-Tucker multipliers of its constrained optimization, which measure the marginal control effort spent to maintain safety against each obstacle. This paper evaluates whether a horizon-weighted sum of those multipliers, a dual stress signal, provides a hazard monitor complementary to the geometric warnings the same state already supports. We compare it against a battery of fifteen geometric detectors tuned to a matched false-alarm budget, on preregistered held-out crossing scenarios driven through a physics simulator. The stress alarm actionably flags 4.7 times as many collisions missed by the entire geometric battery as the geometric battery flags in return (85 versus 18); combined, the two channels warn of three quarters of the collisions for which braking remained feasible, against under half for the geometric battery alone.

0.09

From Roadside Sensing to Risk-Informed Safety Control: Surrogate Safety Measures as a Cyber-Physical Interface

eess.SY ·2026-11-03 ·Salsabil Salah, Yiqiao Li, Bo Wang
published similarity 0.63
Abstract · Accepted by 2027 TRB Annual Meeting

Proactive intersection safety analysis depends on trajectory data whose reliability varies by sensing modality, yet infrastructure-perception and surrogate safety measure (SSM) research have only recently begun to converge. This paper synthesizes both literatures alongside control theory to clarify how sensing choices, safety metrics, and predictive control connect end-to-end, and where infrastructure-derived risk signals could inform autonomous vehicle decision-making. Searches covered light detection and ranging (LiDAR), cooperative perception, time-to-collision (TTC), post-encroachment time (PET), extreme value theory, model predictive control (MPC), and signal control. Screening considered trajectory-based safety and control relevance, excluding detection benchmarks without safety linkage. This structured narrative synthesis retained 56 sources. No single SSM is universally valid: one-dimensional TTC and modified TTC suit longitudinal conflicts, two-dimensional TTC extends time-based measurement to crossing geometries, and observed PET captures crossing and vulnerable road user (VRU) conflicts but only after the event. LiDAR consistently outperforms camera-only sensing for continuous three-dimensional trajectory extraction, illumination robustness, and privacy, though its range degrades in heavy rain, fog, and snow. Its output becomes control-ready only when paired with filtering--Kalman, Savitzky-Golay--that stabilizes noisy detections. This review complements it from the infrastructure side: it examines how roadside sensing affects that chain's reliability, classifies SSMs by conflict geometry and temporal availability, and maps risk components onto control objectives and constraints for infrastructure and connected and automated vehicle (CAV) applications.

0.33

Testing Between the Test Cases: Proving End-to-End Steering in Conditions You Never Drove

cs.RO cs.LG ·2026-09-10 ·Menuka Ghalan, Charles Rodgers, Zachary D. Asher
similarity 0.62
Abstract · 10 pages, 7 figures, 2 tables

AI-based automated vehicle testing is challenging because a model that passes every test condition can still fail in the real world. Formal verification offers a way to directly address this gap. On a simulated highway and an arterial road we trained two small end-to-end steering networks each in CARLA, one on clear conditions alone and one on clear, fog, night and low sun. All four models were driven against a 2.19 ft lane-departure budget. Without driving again, we used bound propagation, a formal method that reads the trained weights, to compute how far steering can drift at every disturbance strength between two captured images. One calculation covers more than a campaign could drive: on the arterial it spans 133 poses, where ten intensities each would be 10^133 combinations, in minutes on one GPU. Not only did formal verification find conditions that broke the clear-trained policy without simulation testing, it provided some preliminary evidence for potential failures between the test cases. Our overall conclusion is that formal verification is a viable complement to simulation, and could be adopted as a part of verification and validation for automated driving.

0.40

Combining Evasive and Braking Reactions for Safety Reference Models in Automated Vehicles

cs.RO ·2026-09-24 ·Riccardo Donà, Konstantinos Mattas, Biagio Ciuffo
published similarity 0.62
Abstract · 6 pages, 7 figures, Accepted for publication at the IEEE International Conference on Intelligent Transportation Systems (ITSC), 2026

Computational models of careful and competent human drivers are essential for scenario-based evaluation of automated driving systems (ADS). However, most existing safety reference models primarily focus on longitudinal braking, neglecting the role of evasive steering in human collision avoidance. This paper proposes a hybrid Fuzzy-Safety Model (FSM-H) that integrates longitudinal mitigation and lateral avoidance within a unified behavioral framework. The braking component is governed by Proactive Fuzzy Safety (PFS) metrics, representing the erosion of longitudinal safety margins, while the steering component is driven by Criticality Fuzzy Safety for lane-change (CFS-LC), capturing lateral conflict severity and maneuver feasibility. A finite-state architecture models the sequential escalation from nominal driving to braking and, when necessary, to evasive steering, incorporating perception-reaction time and lane-check delays to reflect human decision processes. The model is evaluated in reconstructed high-criticality cut-in scenarios and compared with braking-only and steering-only reference strategies. Results show that the hybrid approach expands the preventability envelope while maintaining behavioral plausibility and computational tractability. The proposed framework provides a transparent and explainable human reference model suitable for simulation-based ADS safety benchmarking and regulatory assessment.

0.32

Beyond the Proving Ground: Independent Public-Road Testing of Assisted Lane Change Systems using LiDAR

cs.RO cs.CV ·2026-08-27 ·Marcello Cellina, Akos Kriston, Antonio Migneco, Davide Maggi, Stefano Favelli +5 more
similarity 0.61
Abstract

Testing of commercial Advanced Driver Assistance Systems is essential to ensure safety and compliance during type approval and in service operation. However, proving ground scenarios may not reflect real world driving complexity, while geo fencing can require manufacturer collaboration and limit assessment independence. This work presents a methodology for independently testing Assisted Lane Change systems on public roads. A campaign on the A31 French motorway used a test vehicle equipped with a LiDAR based vehicle detection and tracking system. Tests covered combinations of inter vehicle distance and speed between the test vehicle and the take over vehicle. Real time kinematic global navigation satellite system receivers assessed detection and tracking performance. Recorded lane change trajectories were compared with the lane change suppression requirements of UNECE Regulation Number 79. Of 27 predefined lane change manoeuvres, 18 were completed and 9 suppressed. In 6 cases, the system allowed manoeuvres that did not meet regulatory minimum distance requirements. In 3 cases, the deviation remained statistically significant after accounting for measurement uncertainty. To the authors knowledge, this is the first public road campaign designed to assess Assisted Lane Change compliance with Regulation Number 79 safety distance requirements. The results demonstrate the suitability of LiDAR based sensing for this purpose. The methodology can support market surveillance and future regulatory revisions by revealing real world behaviours not covered by approval procedures.

0.32

SCET-CBF: Speed-Calibrated Soft Guidance for One-Step Dynamic Navigation

cs.RO ·2026-10-24 ·Xiaoyu Han, Dongkun Han
similarity 0.61
Abstract · 9 pages, 6 figures

Control barrier functions (CBFs) support collision avoidance, yet dense dynamic encounters can leave a vehicle with no feasible command. Geometric refinements and soft constraints help preserve motion choices. Using these choices also requires accounting for the vehicle's changing turning response. For a steering-limited bicycle, braking can lower closing speed while slowing the lateral motion needed before an obstacle arrives. We propose SCET-CBF, a speed-calibrated soft guidance law for one-step dynamic navigation. A short lateral escape maneuver gives an allowable approach speed. Its speed derivative allows a quadratic program to weigh both effects of braking when choosing acceleration and steering. Soft penalties accommodate competing obstacle preferences within the input set permitted by segment and braking constraints. We derive the guidance and establish protection over each accepted motion segment, together with conditional braking invariance for a single obstacle. On 2500 paired tasks with a 60 s deadline, SCET achieves 72.8% completion, compared with 49.8% for CBF/velocity-obstacle control and 69.8% for an enhanced 1 s CBF-MPC. At 100 obstacles, SCET and the enhanced MPC complete 52.4% and 33.6% of tasks. Paired studies identify the contributions of speed feedback and early activation. Further evaluations examine the operating range under lateral acceleration limits and bounded motion and execution errors.

0.13

Efficient Hybrid Hard--Soft Signal Temporal Logic MPC for Driving under Multimodal Uncertainty

cs.RO eess.SY ·2026-10-11 ·Kumar Manas, Adrian Paschke
similarity 0.60
Abstract · 8 pages

Motion planning for automated vehicles in interactive traffic has to simultaneously ensure safety, respect traffic rules, and maintain comfortable progress under multi-modal behavior uncertainty. Imposing all these requirements as hard constraints reduces feasibility, whereas treating them all as costs allows safety-critical requirements to be traded against progress. We propose a hybrid hard--soft Signal Temporal Logic (STL) MPC framework that optimizes a single shared ego trajectory against every retained behavior hypothesis: minimum-distance and speed predicates are imposed as explicit hard constraints, while soft STL robustness terms shape clearance, comfort, and interaction quality within the resulting feasible driving corridor. This retains robustness to discrete interaction modes without branch-specific contingent ego policies. We further identify substantial symbolic graph-construction overhead and introduce reachability-certified relevance screening and vectorized symbolic construction to reduce computational cost while preserving the feasible set and objective. Closed-loop Monte Carlo evaluation over six highway and intersection scenarios shows the highest strict success rate among the compared planners with no observed collisions or rule violations, at roughly a quarter of the planning latency of the unoptimized formulation. An ablation study separates the two layers: the hard constraints define the safety envelope, while the soft terms improve clearance and motion quality within it.

0.26

MakSafe: A Spatiotemporal Semantic Framework for Formal Specification and Compliance Checking of Road Vehicle Safety Rules

cs.CL cs.SC ·2026-10-14 ·Maksym Labzhaniia, Julien Deantoni, Marie-Agn{è}s Peraldi-Frati, Fr{é}d{é}ric Mallet
publishedbenchmark similarity 0.60
Abstract

Scenario-based validation is essential for automated road vehicles but cannot cover the full variability of openworld traffic. We present MakSafe, a formal spatiotemporal framework for specifying and checking road vehicle safety rules through semantic zones, action-based forecasting, and trace-tree reasoning, avoiding uniform time discretization. We formalize the road network, vehicle states, and occupancy zones, then build executable rules for front-vehicle identification and timeto-collision (TTC) verification. The evaluation combines a tracedependent case study with a scalability benchmark over traffic density (N ), horizon (H), and branch factor (B). MakSafe yields branch-specific verdicts, deriving safe and unsafe outcomes from the same initial scene, and re-evaluates a scenario after a control update. A single rule check stays well below a millisecond across the reported sweep, and longer horizons slow the TTC check.

0.26