CS Paper Radar

Beyond the Proving Ground: Independent Public-Road Testing of Assisted Lane Change Systems using LiDAR

Marcello Cellina, Akos Kriston, Antonio Migneco, Davide Maggi, Stefano Favelli, Fabrizio Re, Fabrizio Minarini, Andrea Nuovo, Riccardo Dona, Biagio Ciuffo

cs.RO cs.CV ·submitted 2026-08-27 06:24 UTC · v1

Abstract

Testing of commercial Advanced Driver Assistance Systems is essential to ensure safety and compliance during type approval and in service operation. However, proving ground scenarios may not reflect real world driving complexity, while geo fencing can require manufacturer collaboration and limit assessment independence. This work presents a methodology for independently testing Assisted Lane Change systems on public roads. A campaign on the A31 French motorway used a test vehicle equipped with a LiDAR based vehicle detection and tracking system. Tests covered combinations of inter vehicle distance and speed between the test vehicle and the take over vehicle. Real time kinematic global navigation satellite system receivers assessed detection and tracking performance. Recorded lane change trajectories were compared with the lane change suppression requirements of UNECE Regulation Number 79. Of 27 predefined lane change manoeuvres, 18 were completed and 9 suppressed. In 6 cases, the system allowed manoeuvres that did not meet regulatory minimum distance requirements. In 3 cases, the deviation remained statistically significant after accounting for measurement uncertainty. To the authors knowledge, this is the first public road campaign designed to assess Assisted Lane Change compliance with Regulation Number 79 safety distance requirements. The results demonstrate the suitability of LiDAR based sensing for this purpose. The methodology can support market surveillance and future regulatory revisions by revealing real world behaviours not covered by approval procedures.

Closest papers

Nearest neighbours by meaning across the whole index.

Corridor-Based Monitoring and Emergency Braking Decision for Automated Vehicle Safety

cs.RO eess.SY ·2026-11-04 ·Junnan Pan, Vladislav Nenchev, Mohak Mansharamani, Prodromos Sotiriadis, Ferdinand Englberger
similarity 0.61
Abstract · Submitted to a Springer Nature journal for peer review as an extended version of a paper presented at VEHITS, for consideration in the Speci…

This paper addresses emergency-braking decisions for a redundant safety channel in automated vehicles. The channel is responsible for identifying hazards from sensor data and determining whether braking is necessary, given the constrained computational resources of embedded hardware. We present an emergency-braking approach that uses a predicted motion corridor to filter \ac{lidar} measurements and then decide whether the ego vehicle must brake. \ac{pmcm} constructs a curvature-aware boundary from the planned path and vehicle geometry so that the monitored region contains the full swept body on both straight and curved paths. \ac{gdeta} then decides whether the ego vehicle must command an emergency brake for objects inside this boundary, scoring geometric occupancy and temporal urgency independently. Hard gates permit braking when either source is conclusive; soft-OR arbitration combines partial evidence when neither gate is active. Consecutive-scan confirmation reduces sensitivity to transient measurement noise. Corridor coverage is evaluated in controlled collision simulations and recorded campus driving. Braking decisions are evaluated in Monte Carlo simulations of lead-vehicle braking and transverse-crossing encounters.

0.34

Testing Between the Test Cases: Proving End-to-End Steering in Conditions You Never Drove

cs.RO cs.LG ·2026-09-10 ·Menuka Ghalan, Charles Rodgers, Zachary D. Asher
similarity 0.60
Abstract · 10 pages, 7 figures, 2 tables

AI-based automated vehicle testing is challenging because a model that passes every test condition can still fail in the real world. Formal verification offers a way to directly address this gap. On a simulated highway and an arterial road we trained two small end-to-end steering networks each in CARLA, one on clear conditions alone and one on clear, fog, night and low sun. All four models were driven against a 2.19 ft lane-departure budget. Without driving again, we used bound propagation, a formal method that reads the trained weights, to compute how far steering can drift at every disturbance strength between two captured images. One calculation covers more than a campaign could drive: on the arterial it spans 133 poses, where ten intensities each would be 10^133 combinations, in minutes on one GPU. Not only did formal verification find conditions that broke the clear-trained policy without simulation testing, it provided some preliminary evidence for potential failures between the test cases. Our overall conclusion is that formal verification is a viable complement to simulation, and could be adopted as a part of verification and validation for automated driving.

0.40

Silence Is Not Assurance: When Production Lane Keeping Assist Does Not Warn, and What It Costs

cs.RO cs.HCeess.SY ·2026-10-22 ·Tianjia Yang, Yuxin Ding, Ke Li, Kaidi Liang, Ruwen Qin +1 more
similarity 0.59
Abstract

Production lane keeping assist (LKA) systems tell the driver whether they detect the lane markings, but whether this displayed status reflects what the system perceives, and what happens when it does not, has not been examined in real-world driving. This study introduces CANDID-LKA, a CAN-based Diagnosis of the Indicated Detection status in LKA. It evaluates a proprietary driver-facing status using three signals: the displayed status and the steering torque of the driver, both recorded from the controller area network (CAN) bus of the vehicle, and the lane perception confidence of a third-party vision system observing the same road. The framework examines how the status responds to driving conditions and estimates how completely it reports degraded lane perception by comparing it with the other two signals in a latent-class model. We apply it to 39,800 seconds of real-world driving from 13 vehicle models of three manufacturers. The results show that the status does not respond consistently to the conditions that make markings harder to see, and that the three makes differ widely in how often they report not detected. The latent-class model shows that the displayed status is incomplete: it reports only 47% of degraded seconds as not detected, compared with 80% for the third-party low perception confidence, and in half of the low-confidence episodes it never reports not detected. In the silent seconds in which the status reads detected while the perception confidence is low and the driver is not in control, the standard deviation of lateral position over the next 3 s is about 60% larger than when the status and the perception confidence agree. A detected status thus does not guarantee reliable lane perception, and silence with the driver not in control is the case that most needs attention.

0.31

From Roadside Sensing to Risk-Informed Safety Control: Surrogate Safety Measures as a Cyber-Physical Interface

eess.SY ·2026-11-03 ·Salsabil Salah, Yiqiao Li, Bo Wang
published similarity 0.59
Abstract · Accepted by 2027 TRB Annual Meeting

Proactive intersection safety analysis depends on trajectory data whose reliability varies by sensing modality, yet infrastructure-perception and surrogate safety measure (SSM) research have only recently begun to converge. This paper synthesizes both literatures alongside control theory to clarify how sensing choices, safety metrics, and predictive control connect end-to-end, and where infrastructure-derived risk signals could inform autonomous vehicle decision-making. Searches covered light detection and ranging (LiDAR), cooperative perception, time-to-collision (TTC), post-encroachment time (PET), extreme value theory, model predictive control (MPC), and signal control. Screening considered trajectory-based safety and control relevance, excluding detection benchmarks without safety linkage. This structured narrative synthesis retained 56 sources. No single SSM is universally valid: one-dimensional TTC and modified TTC suit longitudinal conflicts, two-dimensional TTC extends time-based measurement to crossing geometries, and observed PET captures crossing and vulnerable road user (VRU) conflicts but only after the event. LiDAR consistently outperforms camera-only sensing for continuous three-dimensional trajectory extraction, illumination robustness, and privacy, though its range degrades in heavy rain, fog, and snow. Its output becomes control-ready only when paired with filtering--Kalman, Savitzky-Golay--that stabilizes noisy detections. This review complements it from the infrastructure side: it examines how roadside sensing affects that chain's reliability, classifies SSMs by conflict geometry and temporal availability, and maps risk components onto control objectives and constraints for infrastructure and connected and automated vehicle (CAV) applications.

0.33

Online Joint Calibration of Steering Offset and Planar LiDAR Extrinsics for Wheeled Mobile Robots

cs.RO ·2026-08-27 ·Subodh Mishra, Arindam Dhar, Suprotim Majumdar, Naveen Arulselvan
similarity 0.56
Abstract

Accurate steering sensing and LiDAR-to-vehicle extrinsics are crucial for reliable path tracking in warehouse mobile robots (WMRs); miscalibration often leads to snaking, weaving, and elevated cross-track error (CTE). In practice, steering ``zero'' is commonly set manually (e.g., eyeballing straightness via a PS4 joystick), while LiDAR extrinsics are assumed from CAD and may drift after maintenance. Such static, manual procedures frequently cause miscalibration in safety-critical environments. This paper presents an Extended Kalman Filter (EKF)--based method for online estimation of steering offset and planar LiDAR extrinsics within a bicycle-kinematics model, providing a principled alternative to manual calibration. Experiments on real datasets show that correcting steering offset reduces CTE substantially, validating the effectiveness of the proposed approach.

0.29

Empirically Calibrated Differential Games for Simulating Driver Interactions

cs.MA math.OC ·2026-10-23 ·Amirmohammad Khakpour, Nachuan Li, Pedram Beigi, Yu, Nie
published similarity 0.56
Abstract · This manuscript is intended for submission to IEEE Transactions on Intelligent Transportation Systems (IEEE T-ITS)

Game-theoretic models can resolve vehicle interactions without hand-written priority rules, but whether they describe human drivers once calibrated has rarely been tested. This study formulates a general-sum differential game of vehicle interactions at urban intersections, calibrates it to observed driving, and evaluates it on data not used for calibration. Each vehicle minimizes a cost that combines speed tracking, adherence to a map-derived lane route, control effort, gap keeping based on the intelligent driver model, a predictive conflict term, and a contact barrier, while perceiving the other vehicles with a delay. The game is solved with a feedback iterative linear-quadratic algorithm, and ten behavioral parameters per vehicle are calibrated by Bayesian optimization on trajectories recorded at four intersections in Washington, D.C. The calibrated game reproduces the trajectories of 819 vehicles with a mean position error of 1.00 m. When only each vehicle's route is known, as in a simulator, it is the most accurate of the compared models on 96 held-out vehicles (7.42 m), and ten-fold cross-validation shows that it is significantly more accurate than calibrated SUMO (by 3.61 m), an inverse reinforcement learning model (by 0.93 m), and independent and cooperative variants of the same model (by 0.33 and 0.32 m). The solutions, computed in 2.1 s for a typical interaction, are verified approximate equilibria. Finally, the conflict and steering weights, which the data do not identify, can be set from safety and comfort targets; together with a stiffer contact barrier, this removes the collisions that otherwise occur in 43% of tight closed-loop conflicts.

0.34

Deep Learning-Based Road Lane Quality Assessment from Egocentric Dashcam Video

cs.CV ·2026-10-20 ·Shaif Chowdhury, Akhila Yeruvasu, Moshiur Rahman Tonmoy, Ayush Goyal, Dunren Che
publisheddatasetcode/data similarity 0.55
Abstract · Accepted in the ICECER 2026

Reliable lane markings are important for both human drivers and automated driving systems, but their condition is still commonly assessed through manual inspection. Existing autonomous-driving datasets primarily support lane detection and scene understanding and usually lack maintenance-oriented labels for lane-marking visibility, continuity, or degradation. In this study, we present a geo-referenced smartphone dashcam dataset and baseline framework for lane-marking quality assessment. The dataset contains 63,839 road-facing frames collected across South Texas using a GPS-enabled dashcam application. A subset of 3,339 frames is matched with OpenStreetMap-derived lane-count labels, which are used as weak supervision for lane-count regression and map-consistency evaluation. We propose three lane-quality measures: Contrast Stability Index (CSI), which captures lane-background contrast using Laplacian responses; Line Continuity Ratio (LCR), which estimates structural continuity using edge and Hough-line evidence; and Regression Lane Confidence Score (RLCS), which measures agreement between predicted and map-derived lane counts on matched frames. The baseline prediction models attained strong performance, with CSI (MAE $0.039$, $R^2=0.97$) and LCR (MAE $0.093$, $R^2=0.84$). Notably, CSI and LCR are no-reference, segmentation-derived quality metrics that can be computed without dense human labels. In a pilot validation using 50 human-ranked images, these proposed lane-specific metrics show stronger rank agreement with human lane-quality ordering (e.g., Spearman's $ρ=0.7316$ and Kendall's $τ=0.5472$ for LCR) than general image-quality measures such as PSNR, SSIM, BRISQUE, NIQE, and LPIPS. We believe the dataset, metrics, and baseline provide an initial step toward scalable, low-cost, location-aware lane-marking quality assessment. Data and code: https://github.com/Shaif95/Road_Quality

0.46

Pre-Lane-change Signal in Transitional Autonomous Vehicles: Results from Controlled Experiments

cs.RO eess.SY ·2026-09-02 ·Zeyu Mu, Danjue Chen, Abhinav Sharma, George F. List
similarity 0.55
Abstract

This paper investigates how a production transitional autonomous vehicle (tAV) develops and executes mandatory lane-change decisions. Using 150 controlled mandatory lane changes from the NC-tALC experiments, the study examines whether the eventual target gap is observable before lateral movement begins and how the tAV progresses longitudinally from that pre-lane-change state to lane-change start. Signal time (SigT) is defined as an operational pre-lane-change-start reference point. A Firth logistic regression predicts whether the tAV eventually merges in front of or behind its nearest target-lane vehicle using relative position and relative speed at SigT. Longitudinal progression from SigT to lane-change start is then examined separately for in-position and repositioning cases. The traffic state at SigT contains substantial information about eventual target-gap choice and provides meaningful lead time before lateral movement begins. The proposed formulation predicts whether the tAV remains with its current gap or repositions to a neighboring gap by moving forward or dropping back, including cases with longitudinal overlap and ambiguous current-gap geometry. The model achieves an average five-fold cross-validated accuracy of 0.89. Results also provide preliminary evidence that in-position and repositioning cases follow different longitudinal pathways from SigT to lane-change start. These findings support a two-stage conjecture of the observable lane-change process: longitudinal preparation from SigT to lane-change start, followed by lateral maneuver execution. The formulation applies to in-position, repositioning, and longitudinally overlapping cases, and can support lane-change models that distinguish target-gap choice from lateral-onset timing while representing longitudinal preparation before lateral movement begins.

0.28