CS Paper Radar

Pre-Lane-change Signal in Transitional Autonomous Vehicles: Results from Controlled Experiments

Zeyu Mu, Danjue Chen, Abhinav Sharma, George F. List

cs.RO eess.SY ·submitted 2026-09-02 13:20 UTC · v1

Abstract

This paper investigates how a production transitional autonomous vehicle (tAV) develops and executes mandatory lane-change decisions. Using 150 controlled mandatory lane changes from the NC-tALC experiments, the study examines whether the eventual target gap is observable before lateral movement begins and how the tAV progresses longitudinally from that pre-lane-change state to lane-change start. Signal time (SigT) is defined as an operational pre-lane-change-start reference point. A Firth logistic regression predicts whether the tAV eventually merges in front of or behind its nearest target-lane vehicle using relative position and relative speed at SigT. Longitudinal progression from SigT to lane-change start is then examined separately for in-position and repositioning cases. The traffic state at SigT contains substantial information about eventual target-gap choice and provides meaningful lead time before lateral movement begins. The proposed formulation predicts whether the tAV remains with its current gap or repositions to a neighboring gap by moving forward or dropping back, including cases with longitudinal overlap and ambiguous current-gap geometry. The model achieves an average five-fold cross-validated accuracy of 0.89. Results also provide preliminary evidence that in-position and repositioning cases follow different longitudinal pathways from SigT to lane-change start. These findings support a two-stage conjecture of the observable lane-change process: longitudinal preparation from SigT to lane-change start, followed by lateral maneuver execution. The formulation applies to in-position, repositioning, and longitudinally overlapping cases, and can support lane-change models that distinguish target-gap choice from lateral-onset timing while representing longitudinal preparation before lateral movement begins.

Closest papers

Nearest neighbours by meaning across the whole index.

Decision Making and Ride Comfort Evaluation Based on Lane-Change Prediction for Autonomous Vehicles

cs.RO cs.AIcs.LG ·2026-10-21 ·Mohamed Manzour, Aditya Kumar, Rubén Izquierdo, Miguel Ángel Sotelo
similarity 0.58
Abstract

Predicting surrounding vehicles' lane-change intentions enables autonomous vehicles to anticipate potential hazards and respond proactively rather than relying solely on reactive maneuvers. This study investigates the benefits of integrating lane-change prediction, based on knowledge graph embeddings and Bayesian inference, into autonomous vehicle decision-making. Three driving strategies are evaluated in risky merging scenarios simulated in CARLA: reactive driving, prediction-based longitudinal action, and prediction-based lateral action. The proposed prediction model anticipates the surrounding vehicle's lane change approximately 3-4 seconds before its occurrence, allowing the ego vehicle to adjust its behavior accordingly. In the representative simulation records, reactive driving results in a collision accompanied by aggressive deceleration. In contrast, prediction-based longitudinal action initiates early braking to establish a safe gap, while prediction-based lateral action performs a lane change when a safe adjacent lane is available. Both predictive strategies avoid collisions in the evaluated records. Compared with reactive driving, peak deceleration before impact is reduced by 31.5% with longitudinal action and 91.0% with lateral action. Additionally, an ISO 2631-1-based horizontal vibration estimate is used to provide a ride comfort assessment. Overall, the results highlight the potential of lane-change prediction to support safer and smoother driving through proactive decision-making, with additional insights into ride comfort provided by vibration-based estimates.

0.26

Combining Evasive and Braking Reactions for Safety Reference Models in Automated Vehicles

cs.RO ·2026-09-24 ·Riccardo Donà, Konstantinos Mattas, Biagio Ciuffo
published similarity 0.56
Abstract · 6 pages, 7 figures, Accepted for publication at the IEEE International Conference on Intelligent Transportation Systems (ITSC), 2026

Computational models of careful and competent human drivers are essential for scenario-based evaluation of automated driving systems (ADS). However, most existing safety reference models primarily focus on longitudinal braking, neglecting the role of evasive steering in human collision avoidance. This paper proposes a hybrid Fuzzy-Safety Model (FSM-H) that integrates longitudinal mitigation and lateral avoidance within a unified behavioral framework. The braking component is governed by Proactive Fuzzy Safety (PFS) metrics, representing the erosion of longitudinal safety margins, while the steering component is driven by Criticality Fuzzy Safety for lane-change (CFS-LC), capturing lateral conflict severity and maneuver feasibility. A finite-state architecture models the sequential escalation from nominal driving to braking and, when necessary, to evasive steering, incorporating perception-reaction time and lane-check delays to reflect human decision processes. The model is evaluated in reconstructed high-criticality cut-in scenarios and compared with braking-only and steering-only reference strategies. Results show that the hybrid approach expands the preventability envelope while maintaining behavioral plausibility and computational tractability. The proposed framework provides a transparent and explainable human reference model suitable for simulation-based ADS safety benchmarking and regulatory assessment.

0.32

Automated-Truck Penetration Shapes Human Drivers' Car-Following Margins Near Motorway Ramps: A Driving-Simulator Study

cs.ET ·2026-11-17 ·Minhao Chen, Zehao Jiang, Julius Secadiningrat, Elnaz Irannezhad
similarity 0.56
Abstract · 31 pages, 7 figures, 5 tables

Automated-vehicle dedicated lanes (AVDLs) are proposed as transitional infrastructure for mixed traffic, but their effect near ramps, and that of automated trucks, on the human drivers sharing the road has rarely been observed. In a mixed-design driving-simulator experiment, 63 drivers were assigned to one of four layouts (an AVDL extending beyond, coinciding with, or ending inside a 1.5-km ramp weaving section, or no AVDL) and drove at four automated-truck penetration levels from 20% to 80%. Linear mixed-effects models with participant random effects and multiplicity control were used. Higher penetration reduced the share of car-following time at gaps below 1.5 s from 28.5% to 18.1% (Holm-adjusted p = .006). This was explained by leader composition: drivers spent 8% of following time behind a truck at 20% penetration and 48% at 80%, kept longer gaps behind trucks, and did not change their gaps within leader type. AVDL layout had no detectable effect on safety margins, rear-end conflict rates, travel time or speed (differences bounded within plus or minus 5 s per section) and no significant effect on workload. Between-driver differences accounted for 52% to 77% of the variance in the main outcomes. Mixed-traffic models should therefore represent human car-following as leader-type-dependent and heterogeneous.

0.21

Beyond the Proving Ground: Independent Public-Road Testing of Assisted Lane Change Systems using LiDAR

cs.RO cs.CV ·2026-08-27 ·Marcello Cellina, Akos Kriston, Antonio Migneco, Davide Maggi, Stefano Favelli +5 more
similarity 0.55
Abstract

Testing of commercial Advanced Driver Assistance Systems is essential to ensure safety and compliance during type approval and in service operation. However, proving ground scenarios may not reflect real world driving complexity, while geo fencing can require manufacturer collaboration and limit assessment independence. This work presents a methodology for independently testing Assisted Lane Change systems on public roads. A campaign on the A31 French motorway used a test vehicle equipped with a LiDAR based vehicle detection and tracking system. Tests covered combinations of inter vehicle distance and speed between the test vehicle and the take over vehicle. Real time kinematic global navigation satellite system receivers assessed detection and tracking performance. Recorded lane change trajectories were compared with the lane change suppression requirements of UNECE Regulation Number 79. Of 27 predefined lane change manoeuvres, 18 were completed and 9 suppressed. In 6 cases, the system allowed manoeuvres that did not meet regulatory minimum distance requirements. In 3 cases, the deviation remained statistically significant after accounting for measurement uncertainty. To the authors knowledge, this is the first public road campaign designed to assess Assisted Lane Change compliance with Regulation Number 79 safety distance requirements. The results demonstrate the suitability of LiDAR based sensing for this purpose. The methodology can support market surveillance and future regulatory revisions by revealing real world behaviours not covered by approval procedures.

0.32

DNC-IMM: Early Lane-Change Intention Recognition via Neural Calibration Based on Driving Context Information

cs.RO cs.AI ·2026-09-01 ·Woong-Chan Byun, Seung-Hyun Kong
publishedhot direction similarity 0.55
Abstract · 8 pages, 5 figures, and 3 tables

Early recognition of lane-change intention is essential for proactive decision-making in autonomous driving and advanced driver assistance systems. This paper proposes a Dual Neural-Calibrated Interacting Multiple Model (DNC-IMM) that improves adaptability to driving context while preserving the probabilistic structure and interpretability of a conventional IMM. The proposed method encodes driving-context information, including target-vehicle motion, gaps to surrounding vehicles, and relative velocities, with a neural network that calibrates both the transition-probability matrix and measurement likelihoods. The final intention is determined from the calibrated IMM mode posterior rather than from a separate direct classifier. Experiments on the highD dataset demonstrate that the proposed method reliably recognizes lane-change intentions before lane crossing and provides particularly strong performance at the earlier 2-3 s prediction horizons.

0.42

Robust lane-change intention anticipation under uncertainty based on a recursive Bayesian filtering approach

eess.SY ·2026-08-21 ·Dilara Kılınç, Hendrik Kleikamp, Bruno Viti
similarity 0.54
Abstract

In this paper we discuss and analyze a method for lane-change intention anticipation of drivers on highways based on kinematic features and surrounding observations. The approach makes use of a recursive Bayesian filtering strategy, which can be interpreted as a hidden Markov model. We present two models for the likelihood term and show how they can handle missing observations. An additional focus of the work lies on calibrating the obtained probabilities in order to obtain reliable predictions. The introduced approach is evaluated in practice on the highD dataset and compared to several other baseline methods. Particular emphasize is put on evaluating the robustness and temporal consistency as well as calibration of the developed algorithm. Extensive numerical experiments allow for a careful performance assessment and detailed discussion of advantages and limitations of the different methodologies.

0.22

Corridor-Based Monitoring and Emergency Braking Decision for Automated Vehicle Safety

cs.RO eess.SY ·2026-11-04 ·Junnan Pan, Vladislav Nenchev, Mohak Mansharamani, Prodromos Sotiriadis, Ferdinand Englberger
similarity 0.53
Abstract · Submitted to a Springer Nature journal for peer review as an extended version of a paper presented at VEHITS, for consideration in the Speci…

This paper addresses emergency-braking decisions for a redundant safety channel in automated vehicles. The channel is responsible for identifying hazards from sensor data and determining whether braking is necessary, given the constrained computational resources of embedded hardware. We present an emergency-braking approach that uses a predicted motion corridor to filter \ac{lidar} measurements and then decide whether the ego vehicle must brake. \ac{pmcm} constructs a curvature-aware boundary from the planned path and vehicle geometry so that the monitored region contains the full swept body on both straight and curved paths. \ac{gdeta} then decides whether the ego vehicle must command an emergency brake for objects inside this boundary, scoring geometric occupancy and temporal urgency independently. Hard gates permit braking when either source is conclusive; soft-OR arbitration combines partial evidence when neither gate is active. Consecutive-scan confirmation reduces sensitivity to transient measurement noise. Corridor coverage is evaluated in controlled collision simulations and recorded campus driving. Braking decisions are evaluated in Monte Carlo simulations of lead-vehicle braking and transverse-crossing encounters.

0.34

Driver Takeovers and Longitudinal Responses Analysis from Naturalistic Driving

cs.HC ·2026-11-05 ·Yuhang Wang, Hao Zhou
datasetcode/data similarity 0.52
Abstract · 28 pages, 14 figures. See arXiv:2603.06986 for the companion dataset paper. The longitudinal subset is available at https://huggingface.co/d…

As Level 2 advanced driver-assistance systems (ADAS) become more widely used, understanding driver-system interaction is increasingly important for traffic safety. However, limited real-world data make these interactions difficult to study. We present ADAS-TO, a naturalistic dataset of 16,446 takeover clips from 364 drivers across 2,585 different drives. It combines road video, vehicle kinematics, driver inputs, and ADAS status. To analyze takeover behavior, we retained 6,206 manually reviewed takeover events during continued lane keeping or car following. We excluded events in which the driver intentionally changed lanes, turned, or made a stop beyond the ADAS's capabilities (e.g., at a red light or stop sign) shortly after takeover. Drivers began intervening before ADAS disengaged in 65.6% of takeovers involving braking or steering. When the ego vehicle was still closing on a lead vehicle at disengagement, longitudinal safety margins often narrowed further after the transfer to manual control. Among 2,031 such events, 78.5% had a lower minimum time-to-collision (TTC) in the five seconds after disengagement than in the five seconds before it. For events involving braking, the mean TTC trajectory reached its minimum about 1.2 s after disengagement. We model the subsequent braking response using a Gazis-Herman-Rothery (GHR) car-following law. Its median five-second spacing root-mean-square error is 1.34 m with observed lead motion and 1.84 m with predicted lead motion. The fitted model expresses braking as a response to looming, with stronger responses at higher speeds and shorter gaps. Applied before takeover, it shows that greater looming than predicted by the human-response reference is associated with disengagement. These findings support continued assessment of longitudinal safety after ADAS disengagement, while the driver's braking response develops.

0.48