CS Paper Radar

Hardwired Distributed Processing Units for Inference: Neural Decisions at the Sensor that Free the Host

Raj Mali

cs.AR cs.DCcs.LG ·submitted 2026-11-04 12:36 UTC · v1

Abstract

We show that a hardwired distributed processing unit (HDPU) can take a neural decision at the sensor and so remove the inference from the host. Built for zebra-crossing detection on a low-cost Artix-7 FPGA, the unit decides on every camera frame in a fixed 2,269,477 clock cycles (34.04 ms depends upon Fpga clk ), inside the 37.49-ms frame period, and on the board it returns the same scores and decisions as its bit-exact software model on all 639 test images. The whole detection path, from camera pixels to decision, takes 1,814 LUTs, with no processor, no operating system and no full-resolution frame store. When the unit answers instead of reporting "not sure", 95.7% of its answers on street photographs are correct, and a hardware contrast stage lifts accuracy on camera-like dashcam frames from 47.7% to 78.2%. The host is spared all of the inference: 8.13 ms of a core in every frame period, where a full-precision ResNet-18 would need more than a frame period even on 16 threads. It also receives 16 bytes per frame instead of 614,400, 38,400 times less. The unit is an 80x60-pixel pipeline feeding a four-layer binarized CNN with 93,408 one-bit weights, verified bit-exactly from a Python model through RTL simulation to the board. Earlier HDPUs did pre-processing (edges, corners, steering); this one shows that the decision itself can move to the sensor.

Comment
8 pages, 9 figures, 11 tables. Companion to arXiv:2610.33107 and arXiv:2610.38752

Closest papers

Nearest neighbours by meaning across the whole index.

Hardwired Distributed Processing Units at the Sensor: Truly Parallel Vision Pre-Processing that Frees the Host CPU

cs.DC cs.AReess.IV ·2026-10-28 ·Raj Mali
similarity 0.74
Abstract · 7 pages, 6 figures, 7 tables. Companion to arXiv:2610.33107

Conventional vision pipelines route every pixel to a host processor, which must then wait for a complete frame before it can act and devote part of each frame period to routine pre-processing. We examine an alternative organisation in which this work is distributed across hardwired distributed processing units (HDPUs): small, fixed datapaths attached directly to the sensor, each committed to a single always-on task, operating truly in parallel on the same pixel stream and delivering compact results to the host. From one library of 3x3 operators sharing a common two-clock latency, we construct three HDPUs (Canny edges, Harris corners, and a line tracker that issues a steering decision) and run them side by side on a single camera stream in a low-cost Artix-7 FPGA, at a cost of 2,568 LUTs and an estimated 0.318 W. Every stage of every unit is bit-exact with its software model. In a full-system simulation with a datasheet camera model, each decision leaves its HDPU within 11.03 camera lines of the pixel that produced it, 22-67x sooner than the earliest moment at which a frame-based program on the host could respond; the HDPU latency varies by no more than 17 ns, whereas the host's own run times reached 12.5x their median. Offloading the three tasks returns 18-30% of a core to the host in every frame period at 640x480, and 63% of the frame period, with all threads in use, at 1080p. The cost of the units grows with frame width only through their line buffers, and in a closed-loop model of a line-following vehicle the HDPU raises the highest speed at which the line is held from 4.75 to 10.00 m/s.

0.42

Fast Path, Exact Path: One Library of Hardwired Operators for Streaming and Exact Canny Edge Detection on a Low-Cost FPGA

cs.AR eess.IV ·2026-10-22 ·Raj Mali
similarity 0.66
Abstract · 7 pages, 5 figures, 7 tables

Hysteresis edge tracking, the final stage of Canny edge detection, follows edge chains of unbounded length and therefore resists single-pass streaming; FPGA designs either approximate it or dedicate separate labelling hardware to it. We show that a single library of hardwired 3x3 operators, each with an identical two-clock latency, delivers both a camera-rate approximation and exact hysteresis on a low-cost Artix-7 (XC7A35T). The fast path streams camera pixels through the operators and K local hysteresis stages and commits each edge decision 262.15-720.63 microseconds after the pixel arrives (K = 1-8; system simulation with a datasheet camera model), that is, 3 + K camera lines later and 46-127x sooner than a frame-based processor can even begin at 30 frames per second. It provably never reports an edge that exact hysteresis rejects, recovers 76.6-96.1% of exact edges at thresholds 20/40, and on the 200 BSDS500 test images retains at least 98.6% of the exact path's boundary F-measure (ODS 0.470-0.477 versus 0.476). The exact path holds 128x128 tiles in block RAM, is exact within each tile, and replaces two-buffer iteration with in-place forward and reverse sweeps built into the same operator. This reduces hysteresis from 38-82 passes to 3-7 on pattern and photo tiles, accelerating the hysteresis step 6.6-21.7x (40x on a worst-case tile) and a complete tile 4.5-9.9x, with identical output. Both paths are bit-exact with software golden models at every pipeline stage and close timing at 50 MHz in at most 1455 LUTs. An optimised multi-core CPU remains faster on stored images, but it cannot begin until the frame is complete.

0.51

FALCON: FPGA-Accelerated Latency-Certifiable Occupancy Networks for Camera-Based Autonomous Driving

cs.CV ·2026-10-15 ·Haohua Que, Mingkai Liu, Handong Yao
published similarity 0.63
Abstract · Accepted to WACV 2027. 10 pages

A perception system that must brake for a pedestrian does not need a low average latency. It must deliver an answer before the deadline on every frame, the worst case included. Commodity edge accelerators optimize the mean through dynamic scheduling, OS jitter, thermal throttling, and contention, so their per-frame latency can be measured but not bounded. We build FALCON, a camera-based 3D occupancy front-end on the AMD Kria KR260, an embedded FPGA drawing 4.3 W idle and up to 6.6 W under inference, and make the latency guarantee layered and explicit: programmable-logic (PL) compute is cycle-bounded analytically; inference is a measured envelope over 100k-frame traces; and a watchdog enforces output delivery, publishing the previous output flagged stale when a frame is late. The deadline runs use a fixed-work proxy of six ResNet-50 DPU inferences per frame, not the full occupancy network: across three 100k-frame enforced runs, all 300k proxy frames delivered an output within the 100 ms deadline plus at most 10.2 ms, the worst of the three runs. The full six-camera FlashOcc pipeline composes to about 1.3 s per frame on the board and is not yet a 10 Hz system. The two operations the DPU cannot run, a view-transform gather and a bilinear resize, become fixed-trip-count PL IPs numerically matched to their software references. On the full Occ3D-nuScenes validation set the board reaches mIoU 29.88, 92.8% of an FP32 baseline the DPU cannot run. On a ResNet-50 probe over 100k frames the KR260 tail stays within 1.5 times its median (2.0 times for the six-inference proxy), where Jetson Orin reaches 4.4 times and the worst datacenter GPU run (NVIDIA L4) 23.6 times. The deployment recipe, HLS sources, and raw timing traces are released.

0.34

Spend the Bits Where the Tiny Objects Are: Rate-Utility Region Coding for Aerial Detection

cs.CV ·2026-11-01 ·Yanliang Qi, Jiacheng Ding, Cong Guo, Peihua Mai
similarity 0.60
Abstract · 17 pages, including supplementary material

Bandwidth-limited aerial cameras must compress their images before a remote detector can find the many tiny objects in them. Threshold-based region-of-interest (ROI) coding sends only confidently detected regions, and because tiny objects provide limited visual evidence and often score low, it can discard the regions that contain them. We propose rate-utility region coding (RUO), which sends a region when its expected detection utility justifies its measured byte cost, choosing to drop it or to send it at low or high quality with one multiplier shared across images. RUO trains no model, uses a standard image codec and decodes in a few milliseconds. On all 1,610 VisDrone-DET test-dev images, RUO uses 42.4% fewer bits than a tuned threshold-based ROI coder, averaged over their shared tiny-object average precision (AP) range. RUO also needs fewer bits for tiny objects than the AV1 Image File Format (AVIF), High Efficiency Video Coding (HEVC) and three published learned codecs, and its advantage over threshold-based ROI coding persists when the sender and receiver use different detectors. For AP over all object sizes RUO needs 25.4% more bits than the tuned ROI coder, because its allocation drops large regions first at low rates, so it suits tasks that target tiny objects. We plan to release the code.

0.37

ResoLUT: Distilling Residual Networks into Lookup-Table Networks

cs.LG ·2026-11-17 ·Katarzyna Fojcik, Aidas Mikalauskas, Matthias Kampa, Renaldas Zioma, Jogundas Armaitis
similarity 0.59
Abstract

Logic networks built from Boolean gates or lookup tables (LUTs) promise efficient hardware inference, but training them at depth and learning their connectivity remain difficult. We do not train logic as logic. Instead, ResoLUT distills a trained residual network (ResNet) layer by layer into LUT trees, preserving its multi-bit residual stream and BatchNorm while extracting connectivity from the teacher rather than learning it. To our knowledge, ResoLUT is the first convolutional logic network in computer vision to retain a ResNet-style multi-bit residual stream. Hard LUT decisions are used throughout training and inference, avoiding a discretization gap in the logic. ResoLUT-20 reaches 95.66% on CIFAR-10 with twice the trees, and ResoLUT-56 reaches 78.87% on CIFAR-100 and 53.69% on ImageNet at 64px, the best results of logic and lookup-table networks on CIFAR-10 and CIFAR-100, showing that LUT networks can scale in depth. We explore and quantify the role of the residuals and the tree budget and shape. The most optimized model, a ResoLUT-8 with one eighth of the trees and further optimizations, fits on an FPGA and reaches 90.04% at 189k images per second, the highest throughput among the compared models above 85% on CIFAR-10.

0.10

Aerial Person Detection under Edge Constraints: Held-Out Evaluation and Edge-Ground Verification

cs.CV cs.RO ·2026-11-15 ·Raghu Venkat, Tricha Anjali
code/datahot direction similarity 0.58
Abstract · 14 pages, 1 figure, 8 tables. Code, truth registers and result files: https://github.com/numberz-ai/aerial-person-detector

A search drone sees a missing person as a few pixels, carries a small computer, and shares a narrow radio link. We study person detection under those limits; the primary evaluations were declared before they ran, and later analyses are marked exploratory. In an exploratory comparison, holding out recording blocks inferred from thermal frame identifiers cut recall at a fixed false-alarm target from 32.7% to 12.3%. With nothing tuned on test blocks, a 46,000-parameter detector gated by a contrast cue finds 10.4% of people against 5.7% for the same network applied everywhere. A standard detector, YOLO11n, trained under the same folds finds 54.5% at a similar false-alarm rate for about eleven times the arithmetic, and on our 4K field footage at 117 m has a walking person among its top 16 detections in up to 92% of frames against 74% for our board. Run alone, YOLO11n's thresholds set at one location overshot their false-alarm target 1.7 to 3.4 times at new locations, and its best configuration at altitude cost 4 to 24 standard passes per frame. Re-scoring its 16 best crops (154 KB per frame) with an 842,000-parameter ground model, thresholds frozen on a validation location, raised recall from 44.9% to 53.7% against the same 16 crops with YOLO's own scores; in a post hoc paired analysis over 15 test locations the gain was +8.8 points [+2.4, +12.5]. Pooled false detections fell from 0.86 to 0.64 per frame, but that paired change was not distinguishable from zero. Coverage of a still person in earth tones was very low for both detectors in the clips we flew.

0.36

Learned Smartphone ISP on Mobile GPUs: Mobile AI 2026 Challenge Report

cs.CV cs.AI ·2026-11-03 ·Andrey Ignatov, Georgy Perevozchikov, Radu Timofte, Yuhong He, Yuxuan Qiu +17 more
similarity 0.58
Abstract

With the increasing importance of mobile camera quality in modern smartphones, growing attention has been directed toward computational photography and advanced image signal processing (ISP) algorithms aimed at enhancing various perceptual attributes of captured images. This creates a need for efficient deep learning models for this problem that are not only performant but can also be deployed on constrained mobile hardware. In this Mobile AI challenge, we address this problem and propose the participants to design fast solutions that can reconstruct RGB photos from RAW Bayer camera data while running on popular smartphone GPUs from Qualcomm and Arm. For this, the participants were provided with a large-scale Fujifilm UltraISP dataset consisting of RAW-RGB image pairs captured with the Sony IMX586 Quad Bayer mobile sensor and a professional 102MP medium format FujiFilm GFX100 camera. The runtime of all models was evaluated on the Snapdragon 8 Elite Gen 5 and Dimensity 9500 chipsets with the Adreno and Mali GPUs, respectively. Top solutions proposed in this challenge are able to reconstruct high-quality 5MP RGB image from raw data on both platforms under 100 milliseconds. A comprehensive description of the models developed in the challenge is provided in this paper.

0.40

PTC-IoU: CPU-Friendly Detection Quality Estimation for Edge Video Analytics

cs.CV cs.PF ·2026-11-09 ·Wei Geng, Hyerin Kim, Chang Lu, Zhenghao Lu, Joerg Ott
similarity 0.58
Abstract · 6 pages, 8 figures, 2 tables

An edge video analytics system must estimate the quality of local detections since there are no ground-truth labels available during runtime. Detectors usually provide confidence scores for their results, but these scores can not reveal every missed object or misplaced bounding box. So a quality estimator is necessary to provide a decision signal indicating which frame has potential detection failures that need to be escalated to a more powerful model in the cloud. Neural network based estimators add workload to the GPU already running detection, while CPU capacity may remain available. We present Predictive Temporal Consistency IoU (PTC-IoU), which moves this workload to CPU by compacting detection boxes histories to support deterministic result scoring. Comparing to neural counterparts, experiments on representative edge hardware, Nvidia Jetson Orin Nano, show that our method reduced per-frame estimator latency from 10.3 ms for neural counterparts to 2.2 ms (4.7x faster), increased pipelined throughput by 13.6%, and cuts estimator energy consumption by up to 95%, while maintaining competitive final detection quality verified on multiple datasets.

0.16