CS Paper Radar

Polarization calibration of fisheye cameras using skylight in the wild

Shuo Wang, Shiqi Che, Dianze Dong, Wenxin Liu

cs.RO ·submitted 2026-11-06 02:51 UTC · v1

Abstract

Skylight polarization provides directional cues for robotic navigation, but fisheye lens effects and analyzer imperfections can degrade polarization measurements across the field of view. We present a joint lens-analyzer calibration method that explicitly models incidence-dependent lens transmission together with analyzer gains and angular offsets in a unified eight-parameter formulation. Given known geometric calibration, rotations between camera frames can be estimated using visual features and cross-frame directional polarized light consistency can be used for polarization calibration. Therefore, our calibration approach requires only a short handheld outdoor sequence under natural skylight, without dedicated polarization calibration equipment or a predefined sky polarization model. On real-world outdoor sequences, the proposed method achieves a weighted cross-frame angle-of-linear-polarization (AoLP) mean absolute error below 0.5° across all incidence angles, with a 73.4% reduction in the 80°-90° incidence angle region, and generalizes to an independent sequence with an overall mean absolute error of 0.466° without refitting. Preliminary solar-azimuth experiments using a camera mounted on a quadruped robot further show improved alignment with the visible solar center, supporting the potential of calibrated AoLP measurements for relative-heading estimation and future polarization--inertial navigation. The calibration software tool will be released upon acceptance of this paper.

Comment
8 pages, 10 figures, submitted to ICRA 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Navigation by Skylight Polarization via Rayleigh Model Optimization on a Road Vehicle

cs.RO eess.SY ·2026-10-14 ·Ben Potter, Eslam Mounier, Aboelmagd Noureldin, Yahia Antar, Muhammad Alam
similarity 0.68
Abstract

Reliable absolute heading estimation is critical for road-vehicle navigation, particularly when magnetic, inertial, or GNSS-based references are degraded. This paper presents a skylight polarization navigation method that estimates vehicle heading by globally optimizing a Rayleigh sky model against measurements from a division-of-focal-plane polarimetric camera. The proposed framework combines a pinhole camera model, a single-scattering Rayleigh polarization model, and a solar position algorithm to synthesize the expected full image angle of polarization distribution for candidate vehicle states. A degree of polarization weighted root mean square error objective function compares measured and simulated polarization patterns, allowing the estimator to use all available sky information while attenuating low confidence pixels caused by clouds, buildings, foliage, and other depolarizing occlusions. Experimental evaluation is performed using three urban road vehicle trajectories collected with a roof mounted polarimetric camera and a high precision dual-antenna GNSS/INS reference system. Results show sub-degree RMS yaw error across all trajectories, ranging from $0.718^{\circ}$ to $0.889^{\circ}$. Compared with representative feature-based and model-based polarization navigation methods, the proposed approach reduces RMS heading error by up to 87% and demonstrates improved robustness to partial sky occlusion.

0.23

Real-world Polarimetric Environment Map Dataset

cs.GR ·2026-11-16 ·Yonghee Oh, Ryota Maeda, Yunseong Moon, Seung-Hwan Baek
top venue similarity 0.60
Abstract · Published in SIGGRAPH Asia 2026 Conference Papers

Environment maps are a standard representation of illumination, enabling realistic image-based lighting in modern rendering systems. However, existing environment maps typically encode only RGB radiance, omitting polarization, an intrinsic property of light that is imperceptible to the human eye but informative about surface shape and material properties. This omission precludes the physically accurate simulation of polarized light transport under in-the-wild illumination conditions, heavily limiting the development and evaluation of robust polarization-based scene reconstruction and understanding methods. We address this gap by introducing a real-world polarimetric environment map dataset, each providing a full-sphere panorama with per-pixel high-dynamic-range RGB Stokes vectors. To acquire the dataset, we design and calibrate a dedicated imaging system and develop a polarization-aware panorama-stitching pipeline. In particular, we introduce a frame-field representation for perspective cameras, together with singularity-aware blending, to enable smooth polarimetric panorama stitching without singularity artifacts. Using this system, we capture 100 polarimetric environment maps across diverse real-world scenes. We further develop a custom rendering plugin and demonstrate close agreement between real and rendered observations. Finally, we analyze the polarization state of the sky across different times and weather conditions, and demonstrate its practical impact on a downstream shape-from-polarization task.

0.45

An Open Panoramic Aerial Robot: Airframe-Integrated Multi-Fisheye Sensing, Onboard ERP Formation, and Field Evaluation

cs.RO ·2026-09-02 ·Dun Dai, Ze Lu, Cheng He, Yaowen Wang, Quan Quan
code/data similarity 0.59
Abstract

We present an open panoramic aerial robot with four synchronized fisheye cameras integrated into a carbon-fiber airframe and an onboard NVIDIA Jetson Orin NX. The robot outputs calibrated raw views and an equirectangular panorama (ERP; 1280x640 in all experiments). The ERP pipeline uses overlap-specific projection radii, gated local alignment, seam control, and multi-rate state updates, and it runs onboard on the live four-camera stream during flight. The field dataset contains 18 sequences and more than 50,000 synchronized groups from seven sites. On a 60-frame far-field sample, the method reduces the median per-frame AKAZE P90 misalignment by 40.7% compared with Fixed Radius, and with fixed parameters it gives the lowest geometric errors among the tested controls at two held-out sites. Controlled replay on the same NVIDIA Jetson Orin NX measures final-ERP continuity, timing, and module-input power at a 20 Hz input rate. Compared with external stitching software given the same calibrated projection, the onboard pipeline gives final-ERP line continuity no lower than any tested method, while every external configuration measured on the module needs 5.3 to 147 times the input period and 3.8 to 106 times the energy per output. Frozen detection and place-recognition models are used to evaluate the exported images. Code, calibration, reference hardware, and data-access documentation are available in an anonymized repository at https://anonymous.4open.science/r/Open-Pano-Field-CE1F/README.md.

0.42

Scale-Consistent Monocular Fisheye Visual Odometry via Spherical Bundle Adjustment-Guided Unsupervised Depth Learning

cs.CV cs.RO ·2026-11-09 ·Wanhui Luo, Hongbo Zhao, Yi Zhou, Qijun Chen, Yiming Nie +1 more
similarity 0.59
Abstract · 34 pages, 18 figures

The wide field of view of fisheye cameras and the simplicity of a monocular setup make monocular fisheye visual odometry (VO) attractive for robotic localization and mapping. Nevertheless, scale drift remains a major challenge over long trajectories. Unsupervised depth learning can help to mitigate this issue, but the pronounced distortion of fisheye images poses challenges for accurate depth estimation. This article presents S$^2$D-FVO, a monocular fisheye VO framework integrating spherical bundle adjustment (SBA)-guided unsupervised depth learning to improve scale consistency and depth estimation accuracy. Given that pixel reprojection residuals do not uniformly reflect angular deviations between viewing rays and that the first-order linearization of a scalar angular reprojection residual is insensitive to perturbations along one tangent direction, SBA employs tangent-space angular reprojection residuals derived from the spherical logarithmic map. These residuals retain sensitivity along both tangent directions, with their norms equal to the corresponding scalar angular residuals. A median depth-based scale regularization term is further integrated into SBA to constrain the reconstruction scale. Building on these formulations, SBA replaces the pose estimation network during unsupervised depth learning, providing more reliable relative poses for view synthesis. In turn, depth estimates from the well-trained depth estimation network provide scale references for SBA, improving scale consistency while allowing individual 3-D landmark positions to be refined. Extensive experiments conducted on multiple public datasets, as well as two newly collected large-scale datasets, demonstrate that the proposed framework outperforms representative existing approaches in both depth and trajectory estimation accuracy and is applicable to different camera models.

0.21

DensePol: Dense-Angle Polarization Dataset for Learning-Based Polarimetric Vision

cs.CV ·2026-09-08 ·Param Sangani, Ahmad Moori, Erik Blasch, Guna Seetharaman, Hadi Aliakbarpour
similarity 0.56
Abstract

Polarimetric vision is gaining increasing attention because it provides physical cues about scene shape, material, and reflection that are difficult to recover from RGB alone. Recent work has therefore explored predicting polarization directly from conventional RGB images; however, the fidelity of these methods strongly depends on the polarization supervision used for training. Most existing datasets rely on Division-of-Focal-Plane (DoFP) cameras with four spatially interleaved analyzer orientations, which provide limited angular redundancy and introduce interpolation and instantaneous-field-of-view errors. We introduce DensePol, a high-redundancy RGB--polarization dataset based on Division-of-Time (DoT) acquisition, capturing 180 full-resolution analyzer orientations at $1^\circ$ intervals. DensePol contains 2,018 paired RGB--polarization images with the angular measurements and fitting residuals retained. Dense angular sampling substantially improves polarization stability, reducing AoLP deviation from $13.36^\circ$ to $2.21^\circ$. We further introduce a deterministic diffusion-based RGB-to-polarization framework with cyclic AoLP representation and a local DoLP refiner. Experiments demonstrate improved polarization prediction and downstream surface-normal estimation. The dataset and code will be publicly available.

0.45

Vision Transformers for Estimating Irradiance Using Data Scarce Sky Images

eess.IV cs.AIcs.CVcs.LG ·2026-10-22 ·David Hamlyn, Sunny Chaudhary, Tasmiat Rahman
publishedhighly cited similarity 0.56
Abstract

Accurate estimation of diffuse horizontal irradiance (DHI) is critical for optimising photovoltaic system performance and energy forecasting yet remains challenging in regions lacking comprehensive ground-based instrumentation. Recent advancements using Vision Transformers (ViTs) trained on extensive sky image datasets have shown promise in replacing costly irradiance measurement equipment, but the scarcity of long-term, high-quality sky imagery significantly restricts practical implementation. Addressing this critical gap, this study proposes a novel dual-framework approach designed for data-scarce scenarios. First, calculated atmospheric parameters, including extraterrestrial irradiance and cyclic time encodings, are integrated to represent sky conditions without utilising any instrumentation. Next, a sequential pipeline initially predicts synthetic global horizontal irradiance (GHI) and uses it as a feature, to refine DHI estimation. Finally, a dual-parallel architecture simultaneously processes raw and overlay-enhanced fisheye sky images. Overlays are generated through unsupervised, physics-informed cloud segmentation to highlight dynamic sky features. Empirical validation is performed using data from the Chilbolton Observatory, chosen for its temperate climate and frequent cloud variability. To simulate data-scarce conditions, models are trained on a single month (e.g., January) and evaluated across a temporally disjoint, full-year test set. Under this setup, the sequential and dual-parallel frameworks achieve RMSE values within 2-3 W/m^2 and 1-6 W/m^2, respectively, of a state-of-the-art ViT trained on the complete dataset. By combining physics-informed modelling with unsupervised segmentation, the proposed method provides a scalable and cost-effective solution for DHI estimation, advancing solar resource assessment in data-constrained environments.

0.56

AquaBEV: Monocular Underwater BEV Occupancy with 3D Sonar Supervision

cs.RO cs.CV ·2026-09-03 ·Trung Tien Dong, Shengji Jin, Chen Chen, Yi Sheng, Xiaomin Lin
benchmark similarity 0.56
Abstract

Autonomous underwater robots are widely used for exploration, monitoring, and inspection, where safe navigation depends on understanding the surrounding free and occupied space. Bird's eye view (BEV) occupancy provides such a representation, but predicting it from a single underwater RGB image is difficult due to limited, unreliable geometric cues from appearance alone. 3D imaging sonar offers complementary geometric measurements to supervise this task. We introduce AquaBEV, a monocular underwater occupancy model that predicts local BEV occupancy from a single RGB image, using paired 3D imaging sonar as geometric supervision during training. AquaBEV maps visual features into a calibration free polar representation and applies causal decoding along the range dimension before reconstructing the prediction in Cartesian BEV coordinates. A controlled underwater occupancy benchmark was established, adapting representative occupancy methods to the same RGB to sonar task under a unified protocol. AquaBEV achieves 31.4 Visible IoU and 38.6 Observed IoU, 4.0% and 4.3% relative improvements over the strongest transferred baseline.

0.35

MFVINS: Multiple Fisheye Camera-Based Visual Inertial System

cs.RO cs.CV ·2026-09-08 ·Eunseong Jang, YuJin Chung, Sang Jun Lee, Jihyun Yoon, HyungGi Jo
similarity 0.56
Abstract · 29 pages, 11 figures

A simultaneous localization and mapping (SLAM) method using a monocular camera and a low-cost inertial measurement unit (IMU) sensor is an effective way to fulfill a low-cost sensor configuration. Using this sensor configuration, visual-inertial system (VINS) focuses on fusing data from a camera and an IMU sensor to estimate the six degrees-of-freedom (DOF) of the sensor pose. Typically, VINS uses only a single camera as visual input, which lead to problems such as error accumulation due to occlusion, various illumination, and textureless environments. In this paper, we propose a new multiple fisheye camera-based visual-inertial system called MFVINS. We present an IMU-aided FAST feature tracker for multiple cameras that enables efficient extraction and robust matching of local features. Then, the proposed method filters out outliers caused by fisheye distortion on the normalized image plane. Subsequently, a new reprojection error with physical validity constraints is proposed for bundle adjustment using learning-based depth estimation. The proposed method is applied to various scenarios, and its effectiveness is demonstrated by comparing previous VINS methods. In particular, MFVINS is implemented in real-time process to leverage the advantages of using multiple cameras -- robustness against occlusion and textureless regions -- while reducing the computational burden.

0.29