CS Paper Radar

Navigation by Skylight Polarization via Rayleigh Model Optimization on a Road Vehicle

Ben Potter, Eslam Mounier, Aboelmagd Noureldin, Yahia Antar, Muhammad Alam

cs.RO eess.SY ·submitted 2026-10-14 18:41 UTC · v1

Abstract

Reliable absolute heading estimation is critical for road-vehicle navigation, particularly when magnetic, inertial, or GNSS-based references are degraded. This paper presents a skylight polarization navigation method that estimates vehicle heading by globally optimizing a Rayleigh sky model against measurements from a division-of-focal-plane polarimetric camera. The proposed framework combines a pinhole camera model, a single-scattering Rayleigh polarization model, and a solar position algorithm to synthesize the expected full image angle of polarization distribution for candidate vehicle states. A degree of polarization weighted root mean square error objective function compares measured and simulated polarization patterns, allowing the estimator to use all available sky information while attenuating low confidence pixels caused by clouds, buildings, foliage, and other depolarizing occlusions. Experimental evaluation is performed using three urban road vehicle trajectories collected with a roof mounted polarimetric camera and a high precision dual-antenna GNSS/INS reference system. Results show sub-degree RMS yaw error across all trajectories, ranging from $0.718^{\circ}$ to $0.889^{\circ}$. Compared with representative feature-based and model-based polarization navigation methods, the proposed approach reduces RMS heading error by up to 87% and demonstrates improved robustness to partial sky occlusion.

Closest papers

Nearest neighbours by meaning across the whole index.

Polarization calibration of fisheye cameras using skylight in the wild

cs.RO ·2026-11-06 ·Shuo Wang, Shiqi Che, Dianze Dong, Wenxin Liu
similarity 0.68
Abstract · 8 pages, 10 figures, submitted to ICRA 2026

Skylight polarization provides directional cues for robotic navigation, but fisheye lens effects and analyzer imperfections can degrade polarization measurements across the field of view. We present a joint lens-analyzer calibration method that explicitly models incidence-dependent lens transmission together with analyzer gains and angular offsets in a unified eight-parameter formulation. Given known geometric calibration, rotations between camera frames can be estimated using visual features and cross-frame directional polarized light consistency can be used for polarization calibration. Therefore, our calibration approach requires only a short handheld outdoor sequence under natural skylight, without dedicated polarization calibration equipment or a predefined sky polarization model. On real-world outdoor sequences, the proposed method achieves a weighted cross-frame angle-of-linear-polarization (AoLP) mean absolute error below 0.5° across all incidence angles, with a 73.4% reduction in the 80°-90° incidence angle region, and generalizes to an independent sequence with an overall mean absolute error of 0.466° without refitting. Preliminary solar-azimuth experiments using a camera mounted on a quadruped robot further show improved alignment with the visible solar center, supporting the potential of calibrated AoLP measurements for relative-heading estimation and future polarization--inertial navigation. The calibration software tool will be released upon acceptance of this paper.

0.30

PolMamba: Long-wave Infrared Polarimetric Remote Sensing Image Fusion for Vehicle Detection

cs.CV ·2026-10-19 ·Wenjuan Zhang, Xiangrui Peng, Zhen Li, Caimeng Yi, Xuesong Ma +2 more
dataset similarity 0.58
Abstract

Blurred vehicle contours and low contrast limit detection performance in infrared remote sensing imagery, while existing fusion methods may introduce polarization noise and fail to integrate complementary information effectively. To address these limitations, we propose a Mamba-based infrared polarimetric remote sensing image fusion model. Infrared polarization information reflects surface material properties and geometry, providing complementary information to infrared intensity. The proposed method first combines long-wave infrared total intensity S0 and the degree of linear polarization (DoLP), using a physics-inspired polarization-response proxy and spatial structural continuity to extract guidance features. It then employs bidirectional state space scanning along horizontal, vertical, and both diagonal orientations to enable cross-modal feature fusion across the entire image. Prior-guided multi-window structural similarity, reconstruction constraints, and a relative lower-bound loss for polarization saliency are jointly introduced to suppress noise while preserving global background structures and target polarization features. In addition, we construct AIR-LWIR-Pol, a dataset of 1,901 accurately registered image pairs acquired using an airborne division-of-aperture long-wave infrared polarimetric imaging system, and evaluate downstream vehicle detection using YOLO11. The experimental results show that the proposed method outperforms the comparison methods on four fusion metrics, including entropy and structural similarity. Vehicle detection mAP50 and mAP50-95 reach 55.0% and 29.4%. These results demonstrate the effectiveness of combining physical priors with state space modeling for long-wave infrared polarization image fusion and support its use for target detection in complex remote sensing scenes.

0.19

Improving Observability of Relative Orbit Estimation Using Bearing Measurements and Light Curves

eess.SY ·2026-08-17 ·Yasuhiro Yoshimura, Toshiya Hanada
published similarity 0.56
Abstract · 33 pages. Accepted for publication in Journal of Space Safety Engineering

Relative orbit estimation using optical observations is a key technology for on-orbit servicing missions. In the far-range phase, the target appears as an unresolved point source, providing only bearing angles (azimuth and elevation) from the servicing satellite. Angles-only navigation is inherently challenging due to the weak observability of the relative range. To address this limitation, this study investigates the effectiveness of an estimation scheme that fuses photometric light curve data with bearing measurements. Since the light intensity depends on the relative distance, fusing light curves enhances the observability of the relative state. The Ashikhmin-Shirley model is used as the optical reflectance model, and observability analysis is conducted with the Fisher information matrix. Numerical simulations involving different target geometries, a flat plate and a box-wing satellite, demonstrate that integrating light curve measurements significantly enhances observability and enables faster convergence compared to conventional state estimation methods.

0.47

GNSS Anomaly Detection in Urban Canyons: A Comprehensive Survey of Multimodal Visibility Inference

eess.SP ·2026-10-25 ·Abdelgabar Ahmed, Tarig Ballal, Nour Kouzayha, Tareq Y. Al-Naffouri
publishedsurvey similarity 0.53
Abstract · Accepted for publication in IEEE Aerospace and Electronic Systems Magazine. DOI: 10.1109/MAES.2026.3746915

Reliable GNSS positioning in dense urban environments depends on assessing satellite visibility and identifying measurements degraded by non-line-of-sight (NLOS) reception and multipath. This survey organizes reception-state inference into three complementary evidence families: receiver-side signals, 3D maps and environmental models, and auxiliary sensors. Receiver-side approaches span antenna/electromagnetic, tracking/baseband, and observable-domain evidence, interpreted through rule-based, statistical, machine-learning, and deep-learning methods. Map-based approaches are examined by reviewing environmental representations and methods such as geometric screening, shadow matching, 3D ray tracing, and neural implicit visibility prediction. IMU, camera, and LiDAR measurements provide complementary kinematic, visual, and geometric evidence for online screening. Across these families, we compare accuracy, interpretability, hardware and calibration requirements, map dependence, computational cost, and suitability for real-time deployment. We identify open challenges in dataset quality and labeling, domain generalization, map freshness, and resource-efficient implementation. The resulting synthesis connects signal processing, environmental modeling, and sensor fusion to guide the design of robust urban GNSS measurement-screening systems.

0.26

Vision Transformers for Estimating Irradiance Using Data Scarce Sky Images

eess.IV cs.AIcs.CVcs.LG ·2026-10-22 ·David Hamlyn, Sunny Chaudhary, Tasmiat Rahman
publishedhighly cited similarity 0.53
Abstract

Accurate estimation of diffuse horizontal irradiance (DHI) is critical for optimising photovoltaic system performance and energy forecasting yet remains challenging in regions lacking comprehensive ground-based instrumentation. Recent advancements using Vision Transformers (ViTs) trained on extensive sky image datasets have shown promise in replacing costly irradiance measurement equipment, but the scarcity of long-term, high-quality sky imagery significantly restricts practical implementation. Addressing this critical gap, this study proposes a novel dual-framework approach designed for data-scarce scenarios. First, calculated atmospheric parameters, including extraterrestrial irradiance and cyclic time encodings, are integrated to represent sky conditions without utilising any instrumentation. Next, a sequential pipeline initially predicts synthetic global horizontal irradiance (GHI) and uses it as a feature, to refine DHI estimation. Finally, a dual-parallel architecture simultaneously processes raw and overlay-enhanced fisheye sky images. Overlays are generated through unsupervised, physics-informed cloud segmentation to highlight dynamic sky features. Empirical validation is performed using data from the Chilbolton Observatory, chosen for its temperate climate and frequent cloud variability. To simulate data-scarce conditions, models are trained on a single month (e.g., January) and evaluated across a temporally disjoint, full-year test set. Under this setup, the sequential and dual-parallel frameworks achieve RMSE values within 2-3 W/m^2 and 1-6 W/m^2, respectively, of a state-of-the-art ViT trained on the complete dataset. By combining physics-informed modelling with unsupervised segmentation, the proposed method provides a scalable and cost-effective solution for DHI estimation, advancing solar resource assessment in data-constrained environments.

0.56

Camera Calibration Using Inaccurate and Asynchronous Discrete GPS Trajectory from Drones

eess.SY cs.CV ·2026-08-27 ·R. Yang, Y. Bar-Shalom, H. A. J. Huang
theory similarity 0.52
Abstract · 11 pages, 12 figs, published on JAIF

This paper considers a stationary camera calibration problem, which estimates the camera orientation angles yaw, pitch and roll, using a drone trajectory recorded by a GPS. There are three challenges in using a GPS trajectory as ground truth for camera calibration. One, the altitude of GPS data is inaccurate with an unknown bias. Two, the GPS receiver and camera are not time synchronized, and there is an unknown time offset between the two systems. Three, the GPS trajectory is time-discrete and accurate interpolation is needed. This is actually an estimation problem since velocity is also needed. To address the first two challenges, we formulate the problem as a parameter estimation problem to estimate a vector consisting of the GPS altitude bias and time offset in addition to the camera yaw, pitch and roll biases. We then develop a special maximum likelihood estimator using the Iterated Least Squares algorithm which can work with a non-synchronized time-discrete GPS trajectory for the third challenge. Since the camera measurement errors are usually small, this requires a high calibration accuracy so that the residual bias error following the calibration should not be significant compared to the measurement error standard deviation. The calibration accuracy depends highly on the drone trajectory. This paper also recommends an appropriate drone trajectory which can yield a good calibration accuracy, namely, 14\% of the measurement error standard deviation. Simulation tests are conducted to demonstrate the algorithm performance. The estimation results meet the Cramer-Rao Lower Bound (CRLB) since the Normalized Estimation Error Squared w.r.t.\ the CRLB is statistically acceptable.

0.18

PolarVis: A Dataset and Diffusion Framework for RGB-to-Polarization Perception in Adverse Driving Scenes

cs.CV ·2026-10-18 ·Ruilin Huang, Jue Wang, Zhen Tian, Xia Hua, F. Richard Yu
similarity 0.52
Abstract

Reflections, glare, transparent structures, and material-dependent appearance variations can introduce ambiguity into RGB-based visual perception in vehicle-relevant environments. Polarization provides complementary reflection- and material-sensitive information, but its acquisition requires dedicated sensing hardware. This paper presents RGB-P Wild, a real-world dataset containing 10,000 paired RGB and four-angle linear-polarization image sets, together with PolarVis, a diffusion-based framework for recovering polarization representations from a single RGB image. PolarVis combines hierarchical RGB feature extraction, diffusion-based feature refinement, four angle-specific decoders, and multi-scale attention recalibration to reconstruct polarization intensity images at $0^\circ$, $45^\circ$, $90^\circ$, and $135^\circ$. On RGB-P Wild, PolarVis achieves a normalized-domain MSE of 0.0465, a PSNR of 27.83 dB, and an SSIM of 0.8597. Compared with the released PolarAnything model under the adopted evaluation protocol, PolarVis obtains an AoLP error of $25.66^\circ$ and a DoLP MAE of 0.0404, compared with $46.03^\circ$ and 0.1084, respectively. Cross-dataset evaluation on vehicle-mounted imagery further examines transfer beyond the training domain. In downstream evaluation, a frozen PCDNet achieves AP50/AP50:95 of 86.3%/59.1% on 990 RGBP-Car test images using PolarVis-generated polarization, compared with 87.0%/59.8% using measured polarization. These results indicate that RGB-derived polarization retains useful polarimetric information for the evaluated perception tasks, while remaining distinct from calibrated physical polarization measurements.

0.24

Do Spinning Radar Doppler Velocity Measurements Improve Vehicle Detection and Tracking?

cs.RO cs.CVeess.SP ·2026-09-17 ·Eric Xie, Daniil Lisus, Timothy D. Barfoot
similarity 0.51
Abstract · 8 pages, 8 figures

Spinning frequency-modulated continuous-wave (FMCW) radars have been gaining popularity in autonomous vehicle perception on account of their robustness to adverse weather conditions and 360° field of view. Recently, scanning radars have also been shown capable of generating per-azimuth Doppler velocity. In this paper, we investigate whether these Doppler velocity measurements improve spinning radar vehicle detection and tracking performance. For detection, we estimate the ego motion and use it to undo the Doppler range distortion of the radar image before passing it to a network. For tracking, we propose a new way to estimate a per-vehicle velocity and use it as a prior for the tracker's motion model. Since Doppler-enabled spinning radar data is not available in any dataset with ground-truth dynamic object labels, our first contribution is an automatic labelling pipeline that uses an ensemble of fine-tuned off-the-shelf lidar detectors to label all 643 km of the Boreas Road Trip dataset. We then transfer detections to radar, and use over 250 km of vehicle-dense sequences as ground-truth training data. By training and evaluating two state-of-the-art detectors, we show that Doppler undistortion can improve detection accuracy by up to $2.37$ points on mean average precision. Furthermore, we show that the Doppler velocity prior can improve tracking accuracy by $13.68$ points on multi-object tracking accuracy (MOTA) versus the zero-velocity initialization baseline, while achieving $99.7\%$ of the MOTA obtained using ground-truth velocities as the prior.

0.23