CS Paper Radar

Improving Observability of Relative Orbit Estimation Using Bearing Measurements and Light Curves

Yasuhiro Yoshimura, Toshiya Hanada

eess.SY ·submitted 2026-08-17 05:42 UTC · v1
published

Abstract

Relative orbit estimation using optical observations is a key technology for on-orbit servicing missions. In the far-range phase, the target appears as an unresolved point source, providing only bearing angles (azimuth and elevation) from the servicing satellite. Angles-only navigation is inherently challenging due to the weak observability of the relative range. To address this limitation, this study investigates the effectiveness of an estimation scheme that fuses photometric light curve data with bearing measurements. Since the light intensity depends on the relative distance, fusing light curves enhances the observability of the relative state. The Ashikhmin-Shirley model is used as the optical reflectance model, and observability analysis is conducted with the Fisher information matrix. Numerical simulations involving different target geometries, a flat plate and a box-wing satellite, demonstrate that integrating light curve measurements significantly enhances observability and enables faster convergence compared to conventional state estimation methods.

Comment
33 pages. Accepted for publication in Journal of Space Safety Engineering

Closest papers

Nearest neighbours by meaning across the whole index.

Attitude Estimation from Photometric Data using Gaussian Process Regression

eess.SY ·2026-08-17 ·Ryui Hara, Yasuhiro Yoshimura, Toshiya Hanada
publishedhighly cited similarity 0.62
Abstract · Accepted for publication in Journal of Space Safety Engineering

The rapid growth of resident space objects in Earth's orbit has intensified the need for advanced space situational awareness and space domain awareness to manage satellite traffic and prevent collisions. Attitude estimation is critical for accurate state propagation, as non-gravitational forces like solar radiation pressure and atmospheric drag depend on the object's attitude. This study explores using light curves, time variation of an object's brightness, to estimate a space object's attitude. Light curve inversion, traditionally used in astronomy, faces challenges when applied to resident space objects due to their non-convex shapes and specular reflections. Conventional methods for attitude estimation often assume known shape and surface parameters, which are usually unknown for space debris generated by a collision or breakup. To address this issue, this study proposes the estimation method combining Gaussian process regression with the unscented Kalman filter. This study uses Gaussian process regression for a non-parametric observation model, enhancing robustness against unknown surface parameters. Numerical examples consider a box-wing object in a geosynchronous orbit and demonstrate that the proposed method has better estimation accuracy than a conventional unscented Kalman filter. The numerical simulation results also represent the attitude estimation robust against uncertainties in surface properties, contributing to practical scenarios in space situational awareness and space domain awareness where the object parameters are unknown.

0.73

Navigation by Skylight Polarization via Rayleigh Model Optimization on a Road Vehicle

cs.RO eess.SY ·2026-10-14 ·Ben Potter, Eslam Mounier, Aboelmagd Noureldin, Yahia Antar, Muhammad Alam
similarity 0.56
Abstract

Reliable absolute heading estimation is critical for road-vehicle navigation, particularly when magnetic, inertial, or GNSS-based references are degraded. This paper presents a skylight polarization navigation method that estimates vehicle heading by globally optimizing a Rayleigh sky model against measurements from a division-of-focal-plane polarimetric camera. The proposed framework combines a pinhole camera model, a single-scattering Rayleigh polarization model, and a solar position algorithm to synthesize the expected full image angle of polarization distribution for candidate vehicle states. A degree of polarization weighted root mean square error objective function compares measured and simulated polarization patterns, allowing the estimator to use all available sky information while attenuating low confidence pixels caused by clouds, buildings, foliage, and other depolarizing occlusions. Experimental evaluation is performed using three urban road vehicle trajectories collected with a roof mounted polarimetric camera and a high precision dual-antenna GNSS/INS reference system. Results show sub-degree RMS yaw error across all trajectories, ranging from $0.718^{\circ}$ to $0.889^{\circ}$. Compared with representative feature-based and model-based polarization navigation methods, the proposed approach reduces RMS heading error by up to 87% and demonstrates improved robustness to partial sky occlusion.

0.23

Joint RF-VLP Position and Velocity Tracking: Bayesian Estimation and Performance Analysis

eess.SP ·2026-11-14 ·Chaedam Son, Si-Hyeon Lee
theory similarity 0.54
Abstract · 13 page, 8 figures, this work has been submitted to the IEEE for possible publication

Visible light positioning (VLP) provides accurate indoor positioning through optical received signal strength (RSS) measurements, while radio-frequency (RF) delay and Doppler measurements offer complementary range and velocity information. Motivated by this complementarity, we investigate joint RF--VLP position and velocity tracking, addressing both recursive state estimation and its fundamental performance characteristics. We formulate a Bayesian maximum a posteriori (MAP) estimation problem that combines optical RSS, RF delay and Doppler measurements, and motion prediction, and develop a Gauss--Newton-based algorithm for recursive tracking. To characterize the estimation limits and the benefits of RF--VLP integration, we derive the Bayesian information matrix and the corresponding Bayesian Cramér--Rao lower bound (BCRLB). We further introduce a state-conditioned information matrix (SCIM), whose inverse coincides with the MAP estimator's mean-squared error matrix under a first-order observation model, enabling tractable analysis of RF-induced information gains. The analysis quantifies the distinct contributions of RF delay and Doppler measurements and reveals different asymptotic estimation-error behaviors with respect to RF and VLP signal-to-noise ratios. Numerical results demonstrate improved position and velocity tracking over the considered baselines, with substantial velocity gains from RF sensing. The results also validate the theoretical asymptotic predictions and show that the inverse of the SCIM closely captures the estimator's error trends.

0.25

Polarization calibration of fisheye cameras using skylight in the wild

cs.RO ·2026-11-06 ·Shuo Wang, Shiqi Che, Dianze Dong, Wenxin Liu
similarity 0.54
Abstract · 8 pages, 10 figures, submitted to ICRA 2026

Skylight polarization provides directional cues for robotic navigation, but fisheye lens effects and analyzer imperfections can degrade polarization measurements across the field of view. We present a joint lens-analyzer calibration method that explicitly models incidence-dependent lens transmission together with analyzer gains and angular offsets in a unified eight-parameter formulation. Given known geometric calibration, rotations between camera frames can be estimated using visual features and cross-frame directional polarized light consistency can be used for polarization calibration. Therefore, our calibration approach requires only a short handheld outdoor sequence under natural skylight, without dedicated polarization calibration equipment or a predefined sky polarization model. On real-world outdoor sequences, the proposed method achieves a weighted cross-frame angle-of-linear-polarization (AoLP) mean absolute error below 0.5° across all incidence angles, with a 73.4% reduction in the 80°-90° incidence angle region, and generalizes to an independent sequence with an overall mean absolute error of 0.466° without refitting. Preliminary solar-azimuth experiments using a camera mounted on a quadruped robot further show improved alignment with the visible solar center, supporting the potential of calibrated AoLP measurements for relative-heading estimation and future polarization--inertial navigation. The calibration software tool will be released upon acceptance of this paper.

0.30

Cislunar navigation is an observability problem: arc-length thresholds, Gramian conditioning, and the Doppler lever

eess.SP astro-ph.EPeess.SYmath.OC ·2026-09-18 ·Chakshu Baweja
similarity 0.52
Abstract · 15 pages, 1 figure, 3 tables, 30 references. Part of the kshana open PNT program. All results reproducible from the released scenario defini…

Dilution of precision is the standard way to describe navigation geometry and it does not apply in cislunar space: its derivation presumes a snapshot solution in which simultaneous measurements determine the state at one instant. A spacecraft tracked by inter-satellite ranging in the Earth-Moon three-body problem has no such solution: range is a function of position only, so the velocity columns of the measurement Jacobian vanish identically and the state is unobservable however many links are in view. The correct figure of merit is dynamical, because the three-body flow carries velocity information into later range measurements. We demonstrate this on four differential-corrected planar distant retrograde orbits, reporting the observability Gramian rather than a dilution of precision. Instantaneous range-only geometry has rank 2 of 4; the full state becomes observable only after a tracking arc of 2.09 h, the first sampled arc at full rank on a 0.26 h grid, and a square-root information filter recomputing the same quantity by a different route becomes well-posed at exactly that arc. Beyond it, conditioning improves monotonically with arc length, the Gramian condition number falling from 1.2e11 at 3 h to 1.4e5 at 48 h. Adding range rate lifts the instantaneous rank from 2 to 4, so a Doppler-capable link makes a snapshot solution exist where a range-only link cannot. Lifting the known-reference assumption, the joint problem of estimating a station and the satellites' states and clocks together is rank-deficient by exactly one without an external interferometric observable in all twenty realizations tested, and full rank with it; the deficiency persists only to four satellites. For the configurations studied, cislunar navigation requirements are better written as arc-length, conditioning and measurement-type budgets than as dilution-of-precision thresholds, which are undefined here.

0.25

Integrated Optical Receiver for Communication and Fine Tracking in Inter-Satellite Links

eess.SP ·2026-09-22 ·Meysam Ghanbari, Mohammad Taghi Dabiri, Akram Alomainy, Qammer H. Abbasi, Mazen O. Hasna +1 more
benchmark similarity 0.52
Abstract

Inter-satellite optical links demand high-precision fine tracking while preserving sufficient received power for data communication, yet these functions are often treated separately at the receiver. This paper proposes a dual-function optical receiver that integrates data reception and fine tracking on a shared, intentionally defocused receiver plane. The architecture combines a central data lens with an annular four-segment tracking detector, creating a fundamental tradeoff between datapower collection and angular-estimation capability. A scalar Fresnel wave-optical model is developed together with nonlinear two-dimensional calibration and a noise-aware worstcase angular-accuracy framework. The receiver geometry is then jointly optimized to maximize the guaranteed fine-tracking range subject to a minimum data-power constraint. Results demonstrate that appropriate co-design of the central aperture and defocus substantially enlarges the usable fine-tracking region while maintaining the required communication-path power. The proposed framework provides a receiver-level benchmark for analyzing and designing integrated communication-and-tracking architectures in future optical inter-satellite terminals.

0.23

Observability Analysis of Joint Steering and Extrinsic Calibration

cs.RO ·2026-08-28 ·Subodh Mishra
similarity 0.52
Abstract

This technical report studies the local weak observability of a planar bicycle-model vehicle when vehicle pose, planar LiDAR extrinsic calibration, and steering-angle bias are estimated jointly. A Lie-derivative-based nonlinear observability analysis is used to examine stationary, straight-line, constant-curvature, and combined straight-plus-arc motion. The resulting observability matrices and nullspaces describe how pose, LiDAR translation and yaw offsets, and steering bias become coupled under different motion primitives. Stationary motion and individual motion primitives retain unobservable directions, whereas the combination of straight and curved motion removes the identified degeneracies and yields full local weak observability of the seven-state system. The analysis provides a theoretical basis for selecting calibration trajectories that sufficiently excite both steering and sensor-extrinsic parameters.

0.24

Spaceborne differential photogrammetry for control-free measurement of large-gradient deformation with structural immunity and a predictable accuracy envelope

cs.CV ·2026-08-26 ·Yueqiang Zhang, Chang Ma, Shuixin Pan, Haibo Liu
similarity 0.52
Abstract · 39 pages, 9 figures, and 5 tables; supplementary material: 10 pages, 3 figures, and 6 tables

Optical satellite image correlation measures wide-area deformation in regimes where coherent interferometric synthetic aperture radar fails because displacement gradients are too large. However, standard pairwise workflows lack a pre-acquisition error budget and rely on extensive stable terrain. We formulate repeat-pass optical correlation as a differential estimation problem without surveyed ground control. Nominal georeferencing defines the coordinate frame, stable-area constraints and displacement priors resolve the datum, and surface displacement is estimated jointly with inter-epoch revisit-bias coefficients. The model yields a predictive accuracy envelope and calibrated per-point posterior uncertainty, bounds along-track uncertainty through a displacement prior, and represents pushbroom jitter using per-line revisit offsets. Simulations and Sentinel-2 and WorldView-2 experiments on the 2019 Ridgecrest earthquake, the 2023 Kahramanmaraş earthquake, and the Baltoro glacier validate the predicted noise floor, control-free accuracy margin, and leakage caused by view-angle and digital elevation model errors. The measured noise floor reaches approximately $0.05$ pixel at $10$,m ground sampling distance. With only five stable tiles, conventional destriping changes the estimated Baltoro trunk velocity from $106$ to $1251$myr$^{-1}$, whereas the prior-constrained estimate remains $87$myr$^{-1}$. Closure analysis attributes approximately $88\%$ of pair-error variance to individual scenes, consistent with $25{,}354$ ITS_LIVE glacier-velocity triplets. Three matching methods lead to the same conclusions. The framework therefore turns pairwise correlation into a robust measurement with a predictive error budget, reduced dependence on stable terrain, and conclusions independent of the matching method.

0.28