CS Paper Radar

Cislunar navigation is an observability problem: arc-length thresholds, Gramian conditioning, and the Doppler lever

Chakshu Baweja

eess.SP astro-ph.EPeess.SYmath.OC ·submitted 2026-09-18 22:23 UTC · v1

Abstract

Dilution of precision is the standard way to describe navigation geometry and it does not apply in cislunar space: its derivation presumes a snapshot solution in which simultaneous measurements determine the state at one instant. A spacecraft tracked by inter-satellite ranging in the Earth-Moon three-body problem has no such solution: range is a function of position only, so the velocity columns of the measurement Jacobian vanish identically and the state is unobservable however many links are in view. The correct figure of merit is dynamical, because the three-body flow carries velocity information into later range measurements. We demonstrate this on four differential-corrected planar distant retrograde orbits, reporting the observability Gramian rather than a dilution of precision. Instantaneous range-only geometry has rank 2 of 4; the full state becomes observable only after a tracking arc of 2.09 h, the first sampled arc at full rank on a 0.26 h grid, and a square-root information filter recomputing the same quantity by a different route becomes well-posed at exactly that arc. Beyond it, conditioning improves monotonically with arc length, the Gramian condition number falling from 1.2e11 at 3 h to 1.4e5 at 48 h. Adding range rate lifts the instantaneous rank from 2 to 4, so a Doppler-capable link makes a snapshot solution exist where a range-only link cannot. Lifting the known-reference assumption, the joint problem of estimating a station and the satellites' states and clocks together is rank-deficient by exactly one without an external interferometric observable in all twenty realizations tested, and full rank with it; the deficiency persists only to four satellites. For the configurations studied, cislunar navigation requirements are better written as arc-length, conditioning and measurement-type budgets than as dilution-of-precision thresholds, which are undefined here.

Comment
15 pages, 1 figure, 3 tables, 30 references. Part of the kshana open PNT program. All results reproducible from the released scenario definitions, result tables and engine patch

Closest papers

Nearest neighbours by meaning across the whole index.

A Sliding Window Filter on the Galilean Group for Consistent Aided Inertial Navigation with Unknown Measurement Delays

cs.RO ·2026-08-30 ·Jonathan Kelly
published similarity 0.58
Abstract · Accepted to the IEEE International Conference on Multisensor Fusion and Integration (MFI), Pilsen, Czechia, Sep 2-4, 2026

We study aided inertial navigation when the aiding sensor measurements are subject to an unknown constant delay. The goal is to estimate the delay and navigation state jointly so that delayed measurements correct the trajectory at the appropriate times, yielding a more accurate navigation solution. We formulate the problem on the special Galilean group, which provides a natural state-space structure for aided navigation with uncertainty in both motion and timing. We then examine the observability of joint delay and state estimation and show that, for a single delayed measurement, the model admits an exact symmetry in which a change in the delay can be compensated by a change in the navigation state, leaving the measurement unchanged. Processing measurements individually allows spurious information to `leak' along the corresponding null direction of the measurement Jacobian, producing overconfident and inconsistent estimates. Applying measurements from multiple times together can eliminate this direction when the trajectory is informative enough. Motivated by this result, we develop a sliding window filter that retains a short history of navigation states and applies delayed aiding corrections jointly across the active window. We conduct a series of simulation studies to characterize estimator accuracy and consistency. The simulations demonstrate that an estimator that does not maintain an adequate window can rapidly become highly inconsistent, whereas even a short sliding window markedly improves consistency by providing the temporal support that observability requires.

0.51

Geometric Analysis of Doppler-Based Navigation with Low Earth Orbit Satellites

cs.IT ·2026-09-10 ·Carlos Caravaca Gallego, Pini Gurfil, Hector Rotstein
similarity 0.56
Abstract

The increasing vulnerability of Global Navigation Satellite Systems has motivated renewed interest in Doppler-based navigation using low Earth orbit satellites, which can determine position, velocity, clock bias, and clock drift from carrier Doppler measurements. However, the geometric dilution of precision (GDOP) in this eight-state problem behaves fundamentally differently from the GDOP in pseudorange-based navigation. In particular, volume-based satellite selection, effective for pseudorange-based GDOP minimization, has been empirically found to perform poorly for Doppler GDOP. This paper establishes a geometric foundation for Doppler GDOP characterization. A closed-form geometric parameterization of the Doppler measurement Jacobian in terms of elevation, azimuth, inclination, and altitude ratio is derived. It is shown that the clock bias sensitivity depends on elevation, altitude, and the angle between the satellite velocity vector and the line of sight. This sensitivity produces a correlation with the clock drift that no geometric arrangement can remove. A Schur complement decomposition of the eight-state information matrix is performed, yielding an exact GDOP inflation formula, governed by a collinearity coefficient that measures the alignment between the clock bias column and a seven-state subspace. It is proven that the geometric coupling that renders clock bias observable is the same coupling that inflates estimation covariance, and that satellite altitude diversity reduces the collinearity by separating satellites at equal elevation onto distinct sensitivity bands. An example employing a two-shell satellite configuration illustrates the analysis.

0.27

Consensus-Based Distributed Filtering for Angles-Only Tracking in Cislunar Space

eess.SY cs.MA ·2026-10-22 ·Giovanni Romagnoli, Fabrizio Pilone, Giordana Bucchioni
publishedbenchmark similarity 0.56
Abstract · Accepted for presentation at IEEE NAVICON 2026

This paper investigates consensus-based distributed filtering strategies for multi-observer angles-only navigation in the cislunar space. The objective is to estimate the inertial state of a target spacecraft using only line-of-sight measurements collected by a network of observer spacecraft. This problem is particularly relevant for autonomous cislunar navigation, where ground support may be limited, and centralized fusion architectures may be problematic due to communication and computational constraints, and single-point failure risks. Three distributed filtering approaches are considered: the Distributed Extended Kalman Filter, the Information-Weighted Consensus Filter, and the Kalman Consensus Filter. All methods share the same local prediction and measurement-processing steps, but differ in the way information is exchanged and fused across the network. Their performance is evaluated and compared to a centralized Extended Kalman Filter, adopted as benchmark, and independent local filters in a high-fidelity cislunar scenario. Numerical simulations show that the distributed approaches significantly improve estimation accuracy with respect to independent filters. Monte Carlo sensitivity analyses are then conducted to characterize the robustness of the considered methods to finite consensus iterations and prior misalignment among the agents.

0.21

Enhancing Lunar PNT Performance Through Surface Station Enabled Radiometric Observables

cs.RO ·2026-10-19 ·Toshiki Tanaka, Satoshi Ikari
similarity 0.54
Abstract

Future lunar surface missions require reliable positioning for autonomous rover operations. Lunar navigation satellite systems may provide limited vertical positioning accuracy due to satellite availability and observation geometry, particularly during early deployment. This study investigates a radiometric navigation architecture in which a lunar surface station (SS) improves rover positioning through double-differenced satellite observations and additional surface-to-surface ranging. Pseudorange and Doppler measurements from lunar navigation satellites are used for relative positioning between the SS and rover, while dual one-way ranging (DOWR) provides an additional range observable. The radiometric solution is integrated with rover dead-reckoning information. Monte Carlo simulations were conducted using five satellites representative of NASA's Lunar Communications Relay and Navigation Systems (LCRNS) constellation and a rover trajectory near Connecting Ridge at the lunar south pole. The results show that the SS improves horizontal and vertical relative positioning, with further gains from DOWR. In the simulated scenario, the mean 99.7% vertical positioning error decreased from 29.9 m without the SS to 5.5 m with double-differenced pseudorange and Doppler processing, and to 4.8 m with DOWR. An uncorrected DOWR hardware bias significantly degraded positioning, whereas the proposed bias-estimation method achieved a final estimation error of 0.058 +/- 0.057 m. The benefit of DOWR also depended on observation geometry. These results demonstrate the potential of a lunar surface station to improve vertical relative positioning through direct radiometric ranging, complementing its communication and navigation support roles.

0.16

Transformer-Informed Trajectory Optimization for Relative Motion in Cislunar Orbits

cs.AI math.OC ·2026-09-21 ·Walter J. Manuel, Yuji Takubo, Simone D'Amico
similarity 0.53
Abstract · 2026 AAS/AIAA Astrodynamics Specialist Conference

Autonomous spacecraft guidance and control requires a fast solution to non-convex trajectory optimization, which can be accelerated by providing a near-optimal initial guess to an optimization protocol, i.e., warm-starting. A robust warm starting method is especially useful for rendezvous, proximity operations, and docking (RPOD) in cislunar space, where the underlying dynamics become severely nonlinear and chaotic compared to those in Earth orbit, especially at perilune. This paper extends the Autonomous Rendezvous Transformer (ART), a transformer-based warm-start trajectory generation method, to cislunar RPOD scenarios for the first time. To accurately and reliably solve the nonconvex optimal control problems (OCPs) posed by these scenarios, a new and enhanced version of ART, ART-TWIN (Two-Way INference), is introduced. Inspired by forward-backward shooting methods used in other trajectory design applications, ART-TWIN autoregressively generates two arcs, one from the initial state and one from the desired terminal state, that are patched together at the midpoint of the timeseries. When evaluated on a set of simulated rendezvous scenarios that are initialized at perilune, ART-TWIN is demonstrated to substantially accelerate convergence and increase feasibility guarantees when used as a warm-start to sequential convex programming (SCP), compared to convex relaxations and the original ART. These results illustrate the necessity of ART-TWIN's dual-arc generation to enable the viability of and gain benefits from using transformer-based warm-start methods in the most challenging areas of the cislunar dynamical regime.

0.35

Selective Monocular Precession Estimation under Geometric and Evaluation Ambiguity: An Auditable Synthetic Study with ORBIT-SCOUT

cs.CV ·2026-10-26 ·Carlos Eduardo Sanoja
similarity 0.53
Abstract · 29 pages, 4 figures and 7 tables; extended narrative review and ancillary code/data for descriptive arithmetic and physical-metric reproduct…

Monocular observations of a tumbling object can support a precise fitted trajectory without establishing that the recovered physical axis is correct. We study this distinction for elongated, approximately cylindrical targets observed by a calibrated stationary camera. ORBIT-SCOUT couples image-derived line and rim geometry to constant-cone and torque-free triaxial trajectory families, then returns a linked momentum-axis and mean-precession-rate estimate only when numerical, geometric, temporal and competing-hypothesis checks pass. We describe the measurement objective, selection policy and limitations, and situate them within spacecraft pose estimation, unknown-target reconstruction, rigid-body identification and selective prediction. An internally preregistered population of 96 new synthetic scenes was processed in two cold passes, retaining all 192 attempts. In the primary pass, 38 scenes produced jointly correct estimates, none produced an incorrect estimate, 57 were withheld and one execution was incomplete. Correct coverage on the 64 supported scenes was 25/64. Ninety-five repeated pairs were scientifically equivalent under a frozen comparison policy; the remaining pair was incomplete. The registered coverage, failure-free execution and all-case repeatability targets were not met. Historical audits also exposed an overly permissive axis metric and motion-dependent acquisition cadence. The contribution is a documented measurement-to-decision implementation and a failure-preserving evaluation case study, not a new rigid-body theory or evidence of state-of-the-art accuracy. Zero observed errors does not establish calibrated risk, and conditional temporal checks do not remove shared image-feature bias. Real-image transfer and external reproduction remain open.

0.24

Two-impulse Rendezvous Planning about Thrusting Spacecraft on SE2(3)

eess.SY ·2026-09-23 ·Micah Condie, Abigaile Woodbury, James Goppert
hot direction similarity 0.52
Abstract

The classical Hill--Clohessy--Wiltshire equations assume an unforced Keplerian reference trajectory, an assumption that is violated by missions requiring continuous thrust. We formulate spacecraft relative motion on the $\mathrm{SE}_2(3)$ Lie group, which encodes position, velocity, and attitude in a single geometric state, linearize the gravity and body-frame control mismatches between the two vehicles, and derive analytic bounds on every neglected term. Under circular coasting Keplerian assumptions the framework recovers the Hill--Clohessy--Wiltshire equations exactly. For thrusting references the state transition matrix acquires thrust-induced attitude--translation coupling blocks that, when the two vehicles share body-frame inputs, are exact in log coordinates and independent of the attitude error, and a mismatch between the vehicles' inputs re-centers the linearization at their mean. A two-impulse rendezvous planner follows directly. A scalar coupling ratio, computable before planning, separates two regimes. Where it exceeds unity, the planner reduces the terminal error of coupling-blind planners by more than an order of magnitude, and somewhat above unity it is also more accurate than a Cartesian planner of the same computational structure; well below unity, simpler planners are adequate or better. Simulations confirm the recovery to machine precision and validate every bound along the transfer.

0.33

Improving Observability of Relative Orbit Estimation Using Bearing Measurements and Light Curves

eess.SY ·2026-08-17 ·Yasuhiro Yoshimura, Toshiya Hanada
published similarity 0.52
Abstract · 33 pages. Accepted for publication in Journal of Space Safety Engineering

Relative orbit estimation using optical observations is a key technology for on-orbit servicing missions. In the far-range phase, the target appears as an unresolved point source, providing only bearing angles (azimuth and elevation) from the servicing satellite. Angles-only navigation is inherently challenging due to the weak observability of the relative range. To address this limitation, this study investigates the effectiveness of an estimation scheme that fuses photometric light curve data with bearing measurements. Since the light intensity depends on the relative distance, fusing light curves enhances the observability of the relative state. The Ashikhmin-Shirley model is used as the optical reflectance model, and observability analysis is conducted with the Fisher information matrix. Numerical simulations involving different target geometries, a flat plate and a box-wing satellite, demonstrate that integrating light curve measurements significantly enhances observability and enables faster convergence compared to conventional state estimation methods.

0.47