CS Paper Radar

Enhancing Lunar PNT Performance Through Surface Station Enabled Radiometric Observables

Toshiki Tanaka, Satoshi Ikari

cs.RO ·submitted 2026-10-19 03:20 UTC · v1

Abstract

Future lunar surface missions require reliable positioning for autonomous rover operations. Lunar navigation satellite systems may provide limited vertical positioning accuracy due to satellite availability and observation geometry, particularly during early deployment. This study investigates a radiometric navigation architecture in which a lunar surface station (SS) improves rover positioning through double-differenced satellite observations and additional surface-to-surface ranging. Pseudorange and Doppler measurements from lunar navigation satellites are used for relative positioning between the SS and rover, while dual one-way ranging (DOWR) provides an additional range observable. The radiometric solution is integrated with rover dead-reckoning information. Monte Carlo simulations were conducted using five satellites representative of NASA's Lunar Communications Relay and Navigation Systems (LCRNS) constellation and a rover trajectory near Connecting Ridge at the lunar south pole. The results show that the SS improves horizontal and vertical relative positioning, with further gains from DOWR. In the simulated scenario, the mean 99.7% vertical positioning error decreased from 29.9 m without the SS to 5.5 m with double-differenced pseudorange and Doppler processing, and to 4.8 m with DOWR. An uncorrected DOWR hardware bias significantly degraded positioning, whereas the proposed bias-estimation method achieved a final estimation error of 0.058 +/- 0.057 m. The benefit of DOWR also depended on observation geometry. These results demonstrate the potential of a lunar surface station to improve vertical relative positioning through direct radiometric ranging, complementing its communication and navigation support roles.

Closest papers

Nearest neighbours by meaning across the whole index.

Lunar Surface Receiver Clock Synchronization Using GNSS and Satellite Nadir Angle

eess.SP ·2026-10-01 ·Minju Han, Seunghyeon Park, Joon Hyo Rhee
similarity 0.68
Abstract · Submitted to ICCE-Asia 2026

The use of signals from Earth-orbiting Global Navigation Satellite System (GNSS) constellations for positioning, navigation, and timing on the lunar surface was recently demonstrated by the Lunar GNSS Receiver Experiment (LuGRE) aboard Blue Ghost Mission 1. For receiver clock synchronization using GNSS, Kalman filter performance depends on the satellite-specific measurement uncertainty used to construct the measurement noise covariance. Terrestrial measurement weighting commonly relies on receiver elevation angle, but the elevation angles in the analyzed LuGRE data are confined to 24.2-31.5 degrees, providing limited discrimination of measurement quality. In contrast, satellite nadir angles span 12.1-66.6 degrees, and the measurement variability increases substantially at small nadir angles. Based on this observation, we propose a measurement weighting model that combines satellite nadir angle with C/N0 for lunar surface receiver clock synchronization. The proposed model is evaluated against three weighting methods adopted from the literature using seven LuGRE operation periods (OPs). It achieves the lowest receiver clock bias root mean square error (RMSE) in six of the seven OPs and an overall RMSE of 5.78 m, which is 19.5% lower than that of the best comparison model. The proposed model also provides the lowest clock bias prediction RMSE under simulated measurement outages.

0.25

LunarRF: A Terrain-Aware Propagation Engine and Pole-Wide 3GPP Surface Coverage Atlas of the Lunar South Pole

cs.NI astro-ph.EPastro-ph.IM ·2026-10-25 ·Christopher J. Santorelli, Alexander M. Wyglinski
similarity 0.55
Abstract · 27 pages, 16 figures, 13 tables. Data release: https://doi.org/10.5281/zenodo.23301640

Artemis surface operations will depend on 3GPP cellular links, yet no public product shows where such links are physically possible across the lunar south pole. We present LunarRF, a GPU system for terrain-aware surface coverage, and the pole-wide atlas produced with it. A footprint engine casts 8192 radial profiles from one of 11,827 candidate masts enumerated by stated rules on the orbit-adjusted LOLA elevation model, takes the viewshed, and evaluates ITU-R P.1812 Delta-Bullington propagation on every profile, continuous through the radio horizon. An order-independent resolver merges the footprints per 20 m cell, making the run shardable and resumable. The atlas covers the disc south of 80°S at 20 m for four SFCG-recommended surface bands and the IM-2 demonstration band, 1.8 to 25.375 GHz, under a stated link budget, storing per cell the best-server power and identity, redundancy count, line of sight and coverability. The engine is validated against a parabolic-equation solver, ray tracing and analytic solutions. Swapping Deygout for Delta-Bullington, or adding terrain noise at the level of the published height-error map of the DEM, moves the coverable class on under 1% of a mast's disc in the mean. With every candidate active, 90.5% of the disc is coverable at 1.8 GHz, 59% at 5.855 GHz and 10% at 25.375 GHz, or 84, 43 and 5% after the measured 3-4 dB engine optimism. A mast covers about 90% of its visible area within its budget-set range, and no band is terrain-limited. The nine current Artemis regions are 85-99% coverable at 1.8 GHz and 22-85% at 5.855 GHz. The atlas and candidate table are released with a DOI.

0.39

RoughSense: Lightweight Terrain-Induced Rover Vibration Prediction Using Point Clouds and IMU Feedback

cs.RO ·2026-09-03 ·Gabriel Manuel Garcia, Stephanie Aravecchia, Miguel Angel Olivares-Mendez
similarity 0.55
Abstract

Autonomous navigation in space requires reliable terrain assessment for safe operations, especially in underground environments with limited communication, computing resources, and power budget. This paper presents a lightweight method for real-time vibration-aware traversability mapping using a Light Detecting And Ranging (LiDAR) point cloud and Inertial Measurement Unit (IMU) measurements. An initial vibration proxy is estimated from terrain geometry by applying Random sample consensus (RANSAC) to local point-cloud patches produced by a Simultaneous Localisation And Mapping (SLAM) algorithm. In parallel, the IMU provides local observations of the vibration experienced by the rover during traversal. The point-cloud-based prediction is then corrected online using Recursive Least Squares, allowing the system to adapt the geometric estimate to the measured rover response. The approach is evaluated in a lunar analogue environment, an outdoor field, and an underground mine.

0.17

Cislunar navigation is an observability problem: arc-length thresholds, Gramian conditioning, and the Doppler lever

eess.SP astro-ph.EPeess.SYmath.OC ·2026-09-18 ·Chakshu Baweja
similarity 0.54
Abstract · 15 pages, 1 figure, 3 tables, 30 references. Part of the kshana open PNT program. All results reproducible from the released scenario defini…

Dilution of precision is the standard way to describe navigation geometry and it does not apply in cislunar space: its derivation presumes a snapshot solution in which simultaneous measurements determine the state at one instant. A spacecraft tracked by inter-satellite ranging in the Earth-Moon three-body problem has no such solution: range is a function of position only, so the velocity columns of the measurement Jacobian vanish identically and the state is unobservable however many links are in view. The correct figure of merit is dynamical, because the three-body flow carries velocity information into later range measurements. We demonstrate this on four differential-corrected planar distant retrograde orbits, reporting the observability Gramian rather than a dilution of precision. Instantaneous range-only geometry has rank 2 of 4; the full state becomes observable only after a tracking arc of 2.09 h, the first sampled arc at full rank on a 0.26 h grid, and a square-root information filter recomputing the same quantity by a different route becomes well-posed at exactly that arc. Beyond it, conditioning improves monotonically with arc length, the Gramian condition number falling from 1.2e11 at 3 h to 1.4e5 at 48 h. Adding range rate lifts the instantaneous rank from 2 to 4, so a Doppler-capable link makes a snapshot solution exist where a range-only link cannot. Lifting the known-reference assumption, the joint problem of estimating a station and the satellites' states and clocks together is rank-deficient by exactly one without an external interferometric observable in all twenty realizations tested, and full rank with it; the deficiency persists only to four satellites. For the configurations studied, cislunar navigation requirements are better written as arc-length, conditioning and measurement-type budgets than as dilution-of-precision thresholds, which are undefined here.

0.25

Beyond GNSS: Leveraging LEO Satellite Signals of Opportunity for Doppler Positioning

cs.IT eess.SY ·2026-11-02 ·Md. Ali Hasan, M. Humayun Kabir, Sangmin Han, Wonjae Shin, H. Vincent Poor
similarity 0.53
Abstract · 17 pages, 4 figures, 2 tables

Large constellations of low Earth orbit (LEO) satellites provide ubiquitous global connectivity; yet, their rapid motion introduces significant Doppler shift effects. While challenging for communication, these effects can be leveraged for precise user terminal (UT) positioning, particularly in GNSS-denied environments where traditional satellite-based navigation struggles. Unlike GNSS, most LEO satellites lack dedicated navigation signals, motivating signals-of-opportunity (SOPs) approaches that repurpose existing LEO signals and use publicly available two-line element (TLE) files for orbital information, although ephemeris errors can limit accuracy. This article explores the fundamental principles, challenges, and enabling technologies for LEO-based Doppler shift positioning, highlighting its advantages over conventional non-Doppler methods, and discussing future research directions. Furthermore, to facilitate realistic and reproducible performance evaluation beyond stochastic modeling, we propose SionnaNTN-RT, a ray tracing framework for non-terrestrial network (NTN) built upon Sionna, enabling end-to-end simulation of Doppler-based positioning. Simulation results demonstrate that Doppler-based positioning can achieve high positioning accuracy in both urban and open-sky environments, highlighting its promise for next-generation positioning systems.

0.27

Terrain-Aware Autonomous Planetary Exploration for Exteroceptive-Proprioceptive Mapping with Quadruped Scouts

cs.RO ·2026-09-28 ·Alberto Sanchez-Delgado, João Carlos Virgolino Soares, Victor Barasuol, Claudio Semini
published similarity 0.52
Abstract · Accepted to the International Conference on Space Robotics (iSpaRo 2026)

Autonomous planetary exploration requires robots to navigate unknown, uneven terrain while assessing risk, traversability, and energetic cost. Quadruped scouts are well suited for this task because they can traverse irregular surfaces and gather mobility-relevant information during locomotion. This paper presents a terrain-aware exploration framework that combines exteroceptive and proprioceptive mapping for a quadruped robot in lunar-like environments. An onboard RGB-D camera builds robot-centered elevation maps, estimates geometric traversability, and derives navigation costs for autonomous planning. In parallel, proprioceptive measurements provide interaction-aware terrain cues that complement geometry-based assessment. Local maps are incrementally registered into a global multi-layer representation, which is used by an exploration module to select targets in unexplored regions of interest. The targets are reached by an autonomous navigation system that guides collision-aware motion using the available map and cost layers. Simulation results on NVIDIA Isaac Sim show autonomous exploration, map expansion, and spatial association between terrain geometry and robot-terrain interaction. Subsequent navigation using this information exhibits lower average Cost of Transport (CoT) than initial exploration.

0.22

Scalable BLE Channel Sounding Localization with Ranging-Assisted PDoA

eess.SP cs.NI ·2026-11-06 ·Jorg Wieme, Eli De Poorter, Jeroen Hoebeke
code/data similarity 0.52
Abstract · 14 pages, 5 figures, 7 tables, Appendix, For reproducibility code available at https://gitlab.ilabt.imec.be/iwine/ra-pdoa-simulator

Bluetooth Channel Sounding (CS) enables accurate phase-based ranging, but multi-anchor localization requires sequential ranging exchanges that limit scalability and increase measurement latency. This paper proposes Ranging-Assisted Phase Difference of Arrival (RA-PDoA), a scalable BLE localization architecture combining one active anchor performing a standard two-way CS exchange with multiple passive receive-only anchors observing the same transmissions. A channel-recovery framework is derived that enables passive anchors to reconstruct a channel response suitable for super-resolution delay estimation, allowing multipath-robust ranging without participating in a two-way exchange. Coarse arrival-time information is further used to bound the position estimate and reject inconsistent range solutions. A comprehensive evaluation characterizes the impact of multipath propagation, body shadowing, synchronization requirements, oscillator impairments, anchor placement, and deployment inaccuracies, thereby quantifying the practical infrastructure requirements for scalable BLE localization. Simulation results in modeled indoor environments show that RA-PDoA reduces the 90th-percentile localization error from 175.3 cm to 95.5 cm under body shadowing while maintaining an airtime requirement independent of the number of anchors. The results demonstrate that a single active ranging link enables scalable and multipath-robust BLE Channel Sounding localization.

0.30

Geometric Analysis of Doppler-Based Navigation with Low Earth Orbit Satellites

cs.IT ·2026-09-10 ·Carlos Caravaca Gallego, Pini Gurfil, Hector Rotstein
similarity 0.52
Abstract

The increasing vulnerability of Global Navigation Satellite Systems has motivated renewed interest in Doppler-based navigation using low Earth orbit satellites, which can determine position, velocity, clock bias, and clock drift from carrier Doppler measurements. However, the geometric dilution of precision (GDOP) in this eight-state problem behaves fundamentally differently from the GDOP in pseudorange-based navigation. In particular, volume-based satellite selection, effective for pseudorange-based GDOP minimization, has been empirically found to perform poorly for Doppler GDOP. This paper establishes a geometric foundation for Doppler GDOP characterization. A closed-form geometric parameterization of the Doppler measurement Jacobian in terms of elevation, azimuth, inclination, and altitude ratio is derived. It is shown that the clock bias sensitivity depends on elevation, altitude, and the angle between the satellite velocity vector and the line of sight. This sensitivity produces a correlation with the clock drift that no geometric arrangement can remove. A Schur complement decomposition of the eight-state information matrix is performed, yielding an exact GDOP inflation formula, governed by a collinearity coefficient that measures the alignment between the clock bias column and a seven-state subspace. It is proven that the geometric coupling that renders clock bias observable is the same coupling that inflates estimation covariance, and that satellite altitude diversity reduces the collinearity by separating satellites at equal elevation onto distinct sensitivity bands. An example employing a two-shell satellite configuration illustrates the analysis.

0.27