CS Paper Radar

Scalable BLE Channel Sounding Localization with Ranging-Assisted PDoA

Jorg Wieme, Eli De Poorter, Jeroen Hoebeke

eess.SP cs.NI ·submitted 2026-11-06 13:25 UTC · v1
code/data

Abstract

Bluetooth Channel Sounding (CS) enables accurate phase-based ranging, but multi-anchor localization requires sequential ranging exchanges that limit scalability and increase measurement latency. This paper proposes Ranging-Assisted Phase Difference of Arrival (RA-PDoA), a scalable BLE localization architecture combining one active anchor performing a standard two-way CS exchange with multiple passive receive-only anchors observing the same transmissions. A channel-recovery framework is derived that enables passive anchors to reconstruct a channel response suitable for super-resolution delay estimation, allowing multipath-robust ranging without participating in a two-way exchange. Coarse arrival-time information is further used to bound the position estimate and reject inconsistent range solutions. A comprehensive evaluation characterizes the impact of multipath propagation, body shadowing, synchronization requirements, oscillator impairments, anchor placement, and deployment inaccuracies, thereby quantifying the practical infrastructure requirements for scalable BLE localization. Simulation results in modeled indoor environments show that RA-PDoA reduces the 90th-percentile localization error from 175.3 cm to 95.5 cm under body shadowing while maintaining an airtime requirement independent of the number of anchors. The results demonstrate that a single active ranging link enables scalable and multipath-robust BLE Channel Sounding localization.

Comment
14 pages, 5 figures, 7 tables, Appendix, For reproducibility code available at https://gitlab.ilabt.imec.be/iwine/ra-pdoa-simulator

Closest papers

Nearest neighbours by meaning across the whole index.

Channel Modeling for Phase-Based Ranging

eess.SP ·2026-08-18 ·Till Droemmer, Markus Gardill
similarity 0.72
Abstract · 4 pages, 4 figures. Submitted to IEEE Radio and Wireless Week (RWW) 2027

This paper presents a Python-based simulation framework for the physical layer of Bluetooth Channel Sounding in accordance with Bluetooth Core Specification v6.2. The simulator implements Mode 3 phase-based ranging across 72 active tones in the 2.4 GHz ISM band and supports multiple propagation conditions, including free-space, static multipath, and IEEE 802.15.4a stochastic multipath channels. In addition, it models relevant hardware and interference effects such as phase noise, phase ramp, carrier frequency offset, IQ imbalance, ADC quantization, and narrowband interference from co-located Wi-Fi systems, with parameters derived from commercial SoC datasheets and field measurements. The framework enables controlled and repeatable analysis of physical layer effects that are difficult to isolate in over-the-air experiments and are not sufficiently represented in existing higher-level simulation tools. This work focuses exclusively on physical layer signal generation, channel modeling, and impairment injection, providing a foundation for future studies on Bluetooth Channel Sounding ranging and localization algorithms.

0.28

Analytical Modeling of Latency and Energy Trade-offs in FiRa-Like BLE-UWB Ranging and Localization Systems

cs.NI ·2026-10-24 ·Adelina Giurea, Jorg Wieme, Ben Van Herbruggen, Jeroen Hoebeke, Eli De Poorter
similarity 0.68
Abstract · submitted to IEEE Transactions on Mobile Computing

Accurate position and distance information provided by Ultra-Wideband (UWB) can enhance a wide range of applications. However, its receive-mode power consumption makes continuous channel monitoring impractical for energy-constrained devices. Consequently, UWB systems often rely on Bluetooth Low Energy (BLE) to discover peers and establish sessions before ranging begins. Although both technologies have been studied in isolation, an framework capturing the latency and energy consumption of the complete workflow is still lacking. To address this gap, we develop a unified analytical model for BLE-assisted UWB systems, from device-to-device ranging to infrastructure-based localization. The model includes closed-form expressions for discovery, parameter exchange, and ranging, and evaluates the resulting latency and energy consumption. Evaluation of three representative BLE configurations shows that the scanner consumes 28-57x more energy per discovery than the advertiser. In addition, the 99th-percentile discovery latency is 2-3.4x higher than the mean and reaches up to 110 s in the lowest-power configuration. The one-time BLE setup overhead is amortized after 24-562 ranging rounds, depending on the discovery configuration. Overall, the analysis demonstrates that the BLE discovery phase can dominate both the latency and the energy budget during short UWB interactions, making discovery configuration as important as the ranging scheme.

0.25

Interference-Aware Tone Selection for Bluetooth Channel Sounding

cs.NI ·2026-11-17 ·Taewoo Kim, Vishrant Tripathi
similarity 0.65
Abstract

Bluetooth Channel Sounding enables distance estimation using phase measurements across multiple frequencies. However, coexistence with Wi-Fi and other 2.4 GHz radios can fragment the available frequency band, making reliable ranging difficult when only a limited number of tones can be selected. Drawing on sparse antenna-array theory, we show that interference avoidance alone is insufficient: the spacing of selected tones can introduce repeated peaks in the ranging response, leading to estimation errors. We propose a lightweight, interference-aware tone-selection method that jointly considers frequency occupancy, tone spacing, and frequency span. Our method constructs a 15-tone map using a three-step rule without ranging measurements, ground-truth distance, or online candidate-map search. We evaluate the method using simulations of 900 indoor environments, a public Bluetooth Channel Sounding dataset, and measurements from commercial Nordic nRF54L15 hardware. Compared with random interference avoiding baseline, our proposed method improves ranging success percentage by 39 points under mixed interference, 29 points on the public dataset, and 82 points in hardware experiments. These results demonstrate the importance of tone selection for practical Bluetooth Channel Sounding.

0.19

RUN-O-RAN: An O-RAN-Native Architecture Enabling Cooperative Uplink Localization

cs.NI ·2026-09-17 ·Viola Bernazzoli, Alberto Ceresoli, Ilario Filippini
similarity 0.64
Abstract · 14 pages, 13 figures

Accurate positioning is increasingly required in indoor and dense urban environments; nonetheless, satellite-based systems are not always available, and standardized 5G localization solutions remain difficult to deploy with commercial devices. This paper presents RUN-O-RAN, an O-RAN-native framework that enables network-centric uplink localization using standard Sounding Reference Signal (SRS) transmissions from commercial 5G devices. RUN-O-RAN xApp coordinates serving and neighboring base stations, enabling non-serving base stations to retrieve SRS-based uplink timing measurements that would be unavailable in conventional RAN deployments, without modifying the UE or existing 3GPP signaling procedures. The framework combines cooperative SRS collection, first-path time-of-arrival estimation, timing-advance tracking, clock-drift compensation, and multi-anchor position estimation into a complete network-side localization service. Experimental evaluation over $150,000$ SRS transmissions validates the proposed framework, achieving meter-level localization under diverse propagation conditions while revealing the impact of anchor geometry and multipath on positioning accuracy. These findings demonstrate that cooperative SRS-based localization can be realized within the O-RAN ecosystem without modifying commercial UEs, providing a practical foundation for future network-native ISAC positioning services.

0.23

IMU-Aided Correction of Orientation-Induced Ranging Error in Bluetooth Channel Sounding on Commercial Hardware

eess.SY ·2026-09-01 ·Mihir Bapat, Santosh Nagaraj
similarity 0.63
Abstract

Bluetooth Low Energy Channel Sounding (BLE CS), standardized in Bluetooth Core Specification 6.0 (September 2024), enables distance estimation via phase-based ranging (PBR) and round-trip time (RTT). Although prior work has studied CS accuracy in configurations with a fixed orientation, no published work has studied how device orientation affects ranging error on commercial hardware. We present the first study of orientation-induced CS ranging error and a Machine Learning correction using IMU features. This study used the EFR32xG24 Channel Sounding Development Kit, the only commercial CS platform with an integrated six-axis Inertial Measurement Unit (IMU). Our results show that device orientation has a substantial effect on CS ranging accuracy; we found that a Random Forest model trained on the IMU derived orientation achieved a 74.6\% Mean Absolute Error (MAE) reduction under a Leave One Orientation Out Evaluation, demonstrating that IMU readings have potential to improve ranging accuracy.

0.18

Map-Free Single-Anchor Position Localization Using Multipath Uncertainty at Upper Mid-Band

eess.SP ·2026-09-08 ·Xingchen Liu, Mingjun Ying, Xinquan Wang, Dipankar Shakya, Homa Nikbakht +2 more
published similarity 0.58
Abstract · 6 pages, 5 figures. Accepted for presentation at the 2026 IEEE Global Communications Conference (GLOBECOM), Macao, China, December 2026

Future 5G-Advanced and 6G systems will exploit directional wideband channels for path-based localization, yet map-free indoor positioning remains challenging because extracted multipath components (MPCs) vary widely in localization reliability. This paper presents an uncertainty-aware map-free single-anchor localization framework using 16.95~GHz indoor directional channel measurements collected at NYU WIRELESS in Brooklyn, New York. Per-MPC angular covariance is estimated from the local consistency of neighboring pattern-de-embedded power delay profile (PDP) observations and propagated into geometric localization through weighted fusion of point-type and line-type constraints. Measurements across 20 links with TX--RX separations from 11~m to 97~m show that the proposed covariance-weighted method achieves a mean localization error of 3.86~m, a median of 2.66~m, and 70\% of links within 5~m using five retained MPCs. It outperforms the power-weighted and unweighted variants under identical point/line constraints, as well as the literature baselines. These results indicate that local directional consistency provides reliability information beyond received power alone and demonstrate a practical map-free approach for future indoor directional systems.

0.50

A High-Resolution TOA Estimation Algorithm Based on Compressed Sensing for Coherent Multi-Band Signals

eess.SP ·2026-11-16 ·Jialun Kou, Marc Bauduin, Achiel Colpaert, Zhuangzhuang Cui, Sofie Pollin
similarity 0.56
Abstract · Submitted to IEEE Transactions on Wireless Communications.(06-Feb-2026)

High-resolution time-of-arrival (ToA) estimation is crucial for accurate ranging and localization in future wireless networks. While multi-band operation can synthesize a large virtual bandwidth by probing several separated subbands, the resulting non-contiguous frequency layout induces pronounced sidelobes and dense local maxima in the delay response, making reliable ToA estimation challenging. This paper studies coherent multi-band ToA estimation from a single multi-band channel state information (CSI) snapshot. We derive a multiband least-squares formulation and analyze its point-spread function (PSF) and Cramer-Rao bound (CRB) to characterize the effects of the subband layout on delay accuracy and sidelobe ambiguity. Building on this analysis, we propose a low complexity two-stage particle swarm optimization estimator and incorporate it into orthogonal matching pursuit with a RELAX-type cyclic refinement procedure for multipath delay estimation, mitigating basis mismatch and improving robustness to the dense local maxima induced by non-contiguous multi-band layouts. Numerical results are consistent with the PSF and CRB analyses and show that the proposed framework approaches the CRB in the single-path setting and achieves accurate multipath delay estimation with low computational complexity. Real channel measurements further validate the predicted impact of different subband layouts on delay-estimation performance.

0.28

Meter-Level Wi-Fi RTT Localization on a Production Enterprise WLAN

cs.NI ·2026-09-12 ·Enguang Fan, Binh Minh Tran, Klara Nahrstedt
top venue similarity 0.56
Abstract

Wi-Fi Fine Time Measurement (FTM) promises indoor localization by reusing access points (APs) already deployed for connectivity, but prior evaluations mostly use APs purpose-deployed or calibrated for ranging, leaving it unclear whether a production enterprise WLAN can provide useful localization without localization-specific infrastructure. We evaluate Wi-Fi round-trip time (RTT) localization on IllinoisNet, a live campus WLAN whose APs were placed for coverage and capacity. Using five commodity Android phones at 10 static locations across a 50 m x 30 m office floor spanning LOS, NLOS, and multipath conditions, weighted nonlinear least squares achieves a median error of 1.21 m and a 90th-percentile error of 2.68 m, with no AP replacement, repositioning, or ranging calibration. Residuals vary in magnitude and sign across APs and propagation conditions, suggesting a single global correction is insufficient and motivating AP-aware software calibration rather than new localization-specific infrastructure.

0.51