CS Paper Radar

Analytical Modeling of Latency and Energy Trade-offs in FiRa-Like BLE-UWB Ranging and Localization Systems

Adelina Giurea, Jorg Wieme, Ben Van Herbruggen, Jeroen Hoebeke, Eli De Poorter

cs.NI ·submitted 2026-10-24 03:39 UTC · v1

Abstract

Accurate position and distance information provided by Ultra-Wideband (UWB) can enhance a wide range of applications. However, its receive-mode power consumption makes continuous channel monitoring impractical for energy-constrained devices. Consequently, UWB systems often rely on Bluetooth Low Energy (BLE) to discover peers and establish sessions before ranging begins. Although both technologies have been studied in isolation, an framework capturing the latency and energy consumption of the complete workflow is still lacking. To address this gap, we develop a unified analytical model for BLE-assisted UWB systems, from device-to-device ranging to infrastructure-based localization. The model includes closed-form expressions for discovery, parameter exchange, and ranging, and evaluates the resulting latency and energy consumption. Evaluation of three representative BLE configurations shows that the scanner consumes 28-57x more energy per discovery than the advertiser. In addition, the 99th-percentile discovery latency is 2-3.4x higher than the mean and reaches up to 110 s in the lowest-power configuration. The one-time BLE setup overhead is amortized after 24-562 ranging rounds, depending on the discovery configuration. Overall, the analysis demonstrates that the BLE discovery phase can dominate both the latency and the energy budget during short UWB interactions, making discovery configuration as important as the ranging scheme.

Comment
submitted to IEEE Transactions on Mobile Computing

Closest papers

Nearest neighbours by meaning across the whole index.

Scalable BLE Channel Sounding Localization with Ranging-Assisted PDoA

eess.SP cs.NI ·2026-11-06 ·Jorg Wieme, Eli De Poorter, Jeroen Hoebeke
code/data similarity 0.68
Abstract · 14 pages, 5 figures, 7 tables, Appendix, For reproducibility code available at https://gitlab.ilabt.imec.be/iwine/ra-pdoa-simulator

Bluetooth Channel Sounding (CS) enables accurate phase-based ranging, but multi-anchor localization requires sequential ranging exchanges that limit scalability and increase measurement latency. This paper proposes Ranging-Assisted Phase Difference of Arrival (RA-PDoA), a scalable BLE localization architecture combining one active anchor performing a standard two-way CS exchange with multiple passive receive-only anchors observing the same transmissions. A channel-recovery framework is derived that enables passive anchors to reconstruct a channel response suitable for super-resolution delay estimation, allowing multipath-robust ranging without participating in a two-way exchange. Coarse arrival-time information is further used to bound the position estimate and reject inconsistent range solutions. A comprehensive evaluation characterizes the impact of multipath propagation, body shadowing, synchronization requirements, oscillator impairments, anchor placement, and deployment inaccuracies, thereby quantifying the practical infrastructure requirements for scalable BLE localization. Simulation results in modeled indoor environments show that RA-PDoA reduces the 90th-percentile localization error from 175.3 cm to 95.5 cm under body shadowing while maintaining an airtime requirement independent of the number of anchors. The results demonstrate that a single active ranging link enables scalable and multipath-robust BLE Channel Sounding localization.

0.30

Deconstructing BLE Multi-hop: a Model-based Approach to Quantifying the Challenges

cs.NI ·2026-09-28 ·Bozheng Pang, José Alamos, Thomas C. Schmidt, Matthias Wählisch
unusual similarity 0.63
Abstract

Bluetooth Low Energy (BLE) was originally designed for point-to-point communication, but BLE multi-hop networks have attracted academic and industrial interest. Multi-hop communication, however, introduces desynchronized nodes to the network due to the difference in individual clocks. In this paper, we study the impact of clock drift on a BLE multi-hop network. The aim is to find out if a BLE multi-hop network can be properly set up, why, and how. For this goal, we develop a mathematical model to quantify the collision probability among BLE connections managed by a single device. We provide a simplified version of the model for constrained deployment. The impact of clock drift and our mathematical model are validated through practical experiments. Afterward, we find that a BLE multi-hop network cannot eliminate the impact of clock drift in most cases. Moreover, from a long-term point of view, the collision between BLE connections occurs with a fixed frequency. We further analyze the limitation of using BLE to form multi-hop networks, and propose possible solutions, such as topology limitation, changes to BLE stack or hardware. This paper is a clear and quantitative problem statement on the limitations of using BLE in multi-hop networks.

0.26

Dataset and Experimental Testbed for Deep Learning-Based Bluetooth Device Fingerprinting

eess.SP cs.CR ·2026-10-30 ·Haytham Albousayri, Bechir Hamdaoui
similarity 0.61
Abstract · 6-page paper; accepted and presented at the Experimental Research on Networking (ERN 2026) workshop, part of 17th International Conference o…

AI-enabled wireless networks have emerged as vital components of future-generation wireless communication systems. Among various wireless architectures, Bluetooth Low Energy (BLE) networks have attracted significant research interest due to their widespread adoption and low cost. In these networks, deep learning (DL) models can be integrated directly into the physical-layer infrastructure to perform diverse tasks, including environment sensing, localization, radio frequency fingerprinting (RFFP), and signal denoising. While highly effective under their original training configurations, these DL models often fail significantly when deployed in unseen environments---such as different rooms, varying temperature conditions, or altered carrier frequencies. Addressing this limitation requires rigorous benchmarking of models and algorithms against unseen configurations to evaluate their generalization and robustness. To bridge this gap, this paper makes two key contributions: i) we introduce a comprehensive, large-scale wireless BLE dataset consisting of raw IQ transmissions from 31 distinct commercial devices captured across diverse days, locations, environments, temperatures, receiver hardware, and frequency channels; ii) we present a case study evaluating state-of-the-art techniques for domain-robust RFFP to advance real-world AI reliability.

0.28

Beyond Feasibility: Efficient and Robust On-Device Localization with UWB Concurrent Transmissions

eess.SP cs.NIeess.SY ·2026-11-06 ·Enrico Soprana, Michael Stocker, Davide Vecchia, Matteo Trobinger, Carlo Alberto Boano +1 more
similarity 0.59
Abstract · Submitted to the IEEE Transactions on Mobile Computing

Concurrent transmissions (CTX) enable an ultra-wideband (UWB) tag to range to, or self-localize from, multiple nodes with a single frame reception, significantly improving update rate and energy efficiency compared to traditional approaches. Prior work demonstrated the concept feasibility via prototypes whose real-world applicability is however hindered by many limitations, notably including their inability to directly execute on UWB tags and to cope with interfering UWB signals. We address these limitations in two ways. First, we redesign the core CTX techniques to enable a fast and efficient execution on resource-constrained MCUs without sacrificing accuracy. Second, we leverage the new features in the IEEE 802.15.4z standard to achieve robustness to interference from other UWB devices and enable tags to dynamically select which anchors to use, two crucial and unexplored capabilities in CTX-based systems. We quantitatively evaluate our approach experimentally in two real-world testbeds with different characteristics. We first analyze our new techniques individually, offering an in-depth discussion of design choices and performance trade-offs. Then, we embed all our techniques into a CTX-based system enabling a tag to self-localize entirely on-device, unlocking gains up to 44% in runtime and 85% in energy efficiency compared to traditional approaches.

0.37

MambaLoc: Lightweight Indoor Localization Using Cross-Modal Knowledge Distillation

cs.AI cs.NI ·2026-11-07 ·Mohab Bahnassy, Omar Saqr, Hamada Rizk, Moustafa Youssef
published similarity 0.58
Abstract

Accurate indoor localization on resource-constrained edge devices remains challenging due to the tension between modeling fidelity and computational efficiency. Wi-Fi Channel State Information (CSI) enables low-cost deployment using existing Wi-Fi infrastructure but is heavily distorted by multipath propagation. Transformer-based solutions mitigate these effects but their quadratic complexity limits real-time edge deployment. Ultra-Wideband (UWB) provides geometrically precise ranging yet requires dedicated infrastructure. We present MambaLoc, a cross-modal distillation framework that improves the accuracy-efficiency balance in CSI-based localization. MambaLoc uses a linear-time Selective State Space Model (Mamba) as a lightweight CSI student, guided during training by a UWB-Transformer teacher. A Feature Alignment Module bridges the representational gap between heterogeneous RF modalities, allowing the CSI model to inherit UWB-derived geometric structure without UWB hardware at inference. A probabilistic Gaussian Mixture regression head models multi-modal spatial ambiguity from multipath effects, avoiding the physically implausible averaging of deterministic regression. Evaluations on a real-world dataset show MambaLoc achieves a median localization error of 0.230 m, reducing error by 22.2% over a standalone Mamba baseline, while requiring 65.1% fewer FLOPs and 58% lower inference latency than Transformer-based approaches.

0.39

Interference-Aware Tone Selection for Bluetooth Channel Sounding

cs.NI ·2026-11-17 ·Taewoo Kim, Vishrant Tripathi
similarity 0.57
Abstract

Bluetooth Channel Sounding enables distance estimation using phase measurements across multiple frequencies. However, coexistence with Wi-Fi and other 2.4 GHz radios can fragment the available frequency band, making reliable ranging difficult when only a limited number of tones can be selected. Drawing on sparse antenna-array theory, we show that interference avoidance alone is insufficient: the spacing of selected tones can introduce repeated peaks in the ranging response, leading to estimation errors. We propose a lightweight, interference-aware tone-selection method that jointly considers frequency occupancy, tone spacing, and frequency span. Our method constructs a 15-tone map using a three-step rule without ranging measurements, ground-truth distance, or online candidate-map search. We evaluate the method using simulations of 900 indoor environments, a public Bluetooth Channel Sounding dataset, and measurements from commercial Nordic nRF54L15 hardware. Compared with random interference avoiding baseline, our proposed method improves ranging success percentage by 39 points under mixed interference, 29 points on the public dataset, and 82 points in hardware experiments. These results demonstrate the importance of tone selection for practical Bluetooth Channel Sounding.

0.19

Channel Modeling for Phase-Based Ranging

eess.SP ·2026-08-18 ·Till Droemmer, Markus Gardill
similarity 0.57
Abstract · 4 pages, 4 figures. Submitted to IEEE Radio and Wireless Week (RWW) 2027

This paper presents a Python-based simulation framework for the physical layer of Bluetooth Channel Sounding in accordance with Bluetooth Core Specification v6.2. The simulator implements Mode 3 phase-based ranging across 72 active tones in the 2.4 GHz ISM band and supports multiple propagation conditions, including free-space, static multipath, and IEEE 802.15.4a stochastic multipath channels. In addition, it models relevant hardware and interference effects such as phase noise, phase ramp, carrier frequency offset, IQ imbalance, ADC quantization, and narrowband interference from co-located Wi-Fi systems, with parameters derived from commercial SoC datasheets and field measurements. The framework enables controlled and repeatable analysis of physical layer effects that are difficult to isolate in over-the-air experiments and are not sufficiently represented in existing higher-level simulation tools. This work focuses exclusively on physical layer signal generation, channel modeling, and impairment injection, providing a foundation for future studies on Bluetooth Channel Sounding ranging and localization algorithms.

0.28

Retrospective Evaluation of Bluetooth RSSI Fingerprinting for Bin Localization on an Industrial Shop Floor

cs.NI ·2026-10-15 ·Saif Lakhani
similarity 0.57
Abstract · 2 figures, 1 CSV

This paper evaluates an archival Bluetooth Low Energy received signal strength indicator (RSSI) dataset collected for bin localization on an industrial shop floor. The installation used 24 fixed relays positioned on walls and Bluetooth beacons attached to bins, with each relay applying a Kalman filter to its own readings in firmware before publishing them. The primary survey produced 19,034 usable two-minute fingerprint samples across 90 known positions, with 23 relay measurements available as model features. We compare calibrated path-loss multilateration with two radio-map estimators: distance-weighted $k$-nearest neighbours and Random Forest regression. A random 70/30 row split measures recognition at surveyed positions, while a coordinate-grouped split reserves 27 entire positions for testing and measures interpolation to unseen positions. Random Forest achieved a median error of 0.66~m for surveyed positions, with 77.9% of estimates within 3~m and 96.3% within 10~m. For unseen positions, median error increased to 9.42~m and 55.5% of estimates were within 10~m. Path-loss multilateration produced a 19.41~m median error on unseen positions, close to the 19.62~m mean-position baseline. The results support RSSI fingerprinting for a fixed inventory of surveyed bin positions, but not precise continuous localization between survey points. Git history dates the original implementation to September 7, 2019. The evaluation code in this paper was written in October 2026 and is reported separately from the seven-year-old prototype.

0.24