CS Paper Radar

Deconstructing BLE Multi-hop: a Model-based Approach to Quantifying the Challenges

Bozheng Pang, José Alamos, Thomas C. Schmidt, Matthias Wählisch

cs.NI ·submitted 2026-09-28 07:35 UTC · v1
unusual

Abstract

Bluetooth Low Energy (BLE) was originally designed for point-to-point communication, but BLE multi-hop networks have attracted academic and industrial interest. Multi-hop communication, however, introduces desynchronized nodes to the network due to the difference in individual clocks. In this paper, we study the impact of clock drift on a BLE multi-hop network. The aim is to find out if a BLE multi-hop network can be properly set up, why, and how. For this goal, we develop a mathematical model to quantify the collision probability among BLE connections managed by a single device. We provide a simplified version of the model for constrained deployment. The impact of clock drift and our mathematical model are validated through practical experiments. Afterward, we find that a BLE multi-hop network cannot eliminate the impact of clock drift in most cases. Moreover, from a long-term point of view, the collision between BLE connections occurs with a fixed frequency. We further analyze the limitation of using BLE to form multi-hop networks, and propose possible solutions, such as topology limitation, changes to BLE stack or hardware. This paper is a clear and quantitative problem statement on the limitations of using BLE in multi-hop networks.

Closest papers

Nearest neighbours by meaning across the whole index.

Analytical Modeling of Latency and Energy Trade-offs in FiRa-Like BLE-UWB Ranging and Localization Systems

cs.NI ·2026-10-24 ·Adelina Giurea, Jorg Wieme, Ben Van Herbruggen, Jeroen Hoebeke, Eli De Poorter
similarity 0.63
Abstract · submitted to IEEE Transactions on Mobile Computing

Accurate position and distance information provided by Ultra-Wideband (UWB) can enhance a wide range of applications. However, its receive-mode power consumption makes continuous channel monitoring impractical for energy-constrained devices. Consequently, UWB systems often rely on Bluetooth Low Energy (BLE) to discover peers and establish sessions before ranging begins. Although both technologies have been studied in isolation, an framework capturing the latency and energy consumption of the complete workflow is still lacking. To address this gap, we develop a unified analytical model for BLE-assisted UWB systems, from device-to-device ranging to infrastructure-based localization. The model includes closed-form expressions for discovery, parameter exchange, and ranging, and evaluates the resulting latency and energy consumption. Evaluation of three representative BLE configurations shows that the scanner consumes 28-57x more energy per discovery than the advertiser. In addition, the 99th-percentile discovery latency is 2-3.4x higher than the mean and reaches up to 110 s in the lowest-power configuration. The one-time BLE setup overhead is amortized after 24-562 ranging rounds, depending on the discovery configuration. Overall, the analysis demonstrates that the BLE discovery phase can dominate both the latency and the energy budget during short UWB interactions, making discovery configuration as important as the ranging scheme.

0.25

Channel Modeling for Phase-Based Ranging

eess.SP ·2026-08-18 ·Till Droemmer, Markus Gardill
similarity 0.50
Abstract · 4 pages, 4 figures. Submitted to IEEE Radio and Wireless Week (RWW) 2027

This paper presents a Python-based simulation framework for the physical layer of Bluetooth Channel Sounding in accordance with Bluetooth Core Specification v6.2. The simulator implements Mode 3 phase-based ranging across 72 active tones in the 2.4 GHz ISM band and supports multiple propagation conditions, including free-space, static multipath, and IEEE 802.15.4a stochastic multipath channels. In addition, it models relevant hardware and interference effects such as phase noise, phase ramp, carrier frequency offset, IQ imbalance, ADC quantization, and narrowband interference from co-located Wi-Fi systems, with parameters derived from commercial SoC datasheets and field measurements. The framework enables controlled and repeatable analysis of physical layer effects that are difficult to isolate in over-the-air experiments and are not sufficiently represented in existing higher-level simulation tools. This work focuses exclusively on physical layer signal generation, channel modeling, and impairment injection, providing a foundation for future studies on Bluetooth Channel Sounding ranging and localization algorithms.

0.28

Dataset and Experimental Testbed for Deep Learning-Based Bluetooth Device Fingerprinting

eess.SP cs.CR ·2026-10-30 ·Haytham Albousayri, Bechir Hamdaoui
similarity 0.50
Abstract · 6-page paper; accepted and presented at the Experimental Research on Networking (ERN 2026) workshop, part of 17th International Conference o…

AI-enabled wireless networks have emerged as vital components of future-generation wireless communication systems. Among various wireless architectures, Bluetooth Low Energy (BLE) networks have attracted significant research interest due to their widespread adoption and low cost. In these networks, deep learning (DL) models can be integrated directly into the physical-layer infrastructure to perform diverse tasks, including environment sensing, localization, radio frequency fingerprinting (RFFP), and signal denoising. While highly effective under their original training configurations, these DL models often fail significantly when deployed in unseen environments---such as different rooms, varying temperature conditions, or altered carrier frequencies. Addressing this limitation requires rigorous benchmarking of models and algorithms against unseen configurations to evaluate their generalization and robustness. To bridge this gap, this paper makes two key contributions: i) we introduce a comprehensive, large-scale wireless BLE dataset consisting of raw IQ transmissions from 31 distinct commercial devices captured across diverse days, locations, environments, temperatures, receiver hardware, and frequency channels; ii) we present a case study evaluating state-of-the-art techniques for domain-robust RFFP to advance real-world AI reliability.

0.28

Making Time-Sensitive Networking Deployable: A Comprehensive Lifecycle Architecture

cs.NI ·2026-08-20 ·Rubi Debnath, Paul Pop, Silviu S. Craciunas, Marc Boyer, Sebastian Steinhorst
publishedsurvey similarity 0.50
Abstract · Accepted for publication in the proceedings of the 2026 IEEE/ACM International Conference on Embedded Software (EMSOFT), October 2026

Time-Sensitive Networking (TSN) provides deterministic guarantees and bounded latency for safety-critical applications across different domains. While the IEEE 802.1 TSN standards provide a comprehensive set of mechanisms for time synchronization, shaping, scheduling, resource reservation, and reliability, deploying TSN in real-world applications remains a complex, multi-step engineering task. Existing research primarily focuses on optimizing individual objectives, such as increasing schedulability, reducing latency, accelerating solution generation, or improving performance analysis. However, whether these extensively researched solutions can be deployed in real-world systems remains unanswered, as the assumptions made in these methodologies often differ from practical hardware constraints. Therefore, a broader, holistic view of end-to-end TSN deployment and management remains an open research question. Currently, there is a lack of a unified perspective, consensus, and coordinated research efforts focusing on a comprehensive end-to-end TSN deployment workflow. We present a comprehensive overview of the TSN deployment lifecycle, current challenges, limitations of existing tools, and future research directions for TSN deployment and management. Lastly, we identify key research gaps from a deployment perspective and provide guidance for the development of next-generation deployable TSN networks.

0.25

Band-Separated Redundant Communication for a Mars-Analog Rover

cs.NI ·2026-11-01 ·Zamiul Rashid, Akid Anis, Tanzim Ahmed, Md. Golam Rabiul Alam, Md. Khalilur Rhaman
unusual similarity 0.49
Abstract

Teams in the University Rover Challenge (URC) drive their rovers remotely and often out of sight. The organizers name communication failure as the most common reason a team falls short. A rover therefore needs bandwidth for several camera views and a command path that survives the loss of one radio. We describe and field test the communication stack of the BRACU Mongol-Tori rover, which keeps vision and control on separate radios and bands. Video and RTK corrections travel over a 5.2 GHz bridge with a 2.4 GHz backup, and the Babel routing protocol chooses between them. Every command goes out on two sub-gigahertz radios at once, and the rover uses the backup copy only when the primary falls silent. We tested the backhaul on the bench with a power cut and injected packet loss. We also drove the rover more than a kilometer from the base, and line of sight ended about halfway. On the bench, traffic reached the backup within a few seconds. A metric offset kept it on a primary that lost one packet in ten. In the field, the primary failed at 771 m and the backup carried video and corrections to just over a kilometer. The drive also exposed a limit of Babel, which judges a link only by lost Hello messages. It kept traffic on a primary with a faulty receiver, although the backup reported twice the capacity, and it flapped at the edge of range. We close with lessons on antenna aiming, link metrics and logging.

0.26

Python-based RTL Generator Demonstrated on a Low-IF 2-FSK Wireless Communication System

eess.SY ·2026-08-17 ·Brandon P. Hippe, David C. Burnett
similarity 0.49
Abstract

Hardware optimization is critical in the design of efficient wireless communication systems. Wireless communication hardware often consumes a significant fraction of the total system's power budget, with much of this power used in circuits that reduce various types of noise, particularly in the analog front end. The Single-Chip Micro Mote, or SCuM, uses a crystal-free radio architecture and makes design trade-offs that favor power consumption over noise performance while maintaining standards compatibility with popular Internet-of-Things (IoT) protocols such as IEEE 802.15.4 and Bluetooth Low Energy. In the continued development of SCuM, we recognize that the digital baseband hardware developed can be more closely optimized with the architecture of the chip. In this paper, we present an extensible Python-based RTL generator that is closely linked to simulation and testing environments. This approach provides flexibility for use on different hardware platforms, such as tape-outs and FPGA implementations, and has promise in AI-assisted design workflows.

0.25

Scalable BLE Channel Sounding Localization with Ranging-Assisted PDoA

eess.SP cs.NI ·2026-11-06 ·Jorg Wieme, Eli De Poorter, Jeroen Hoebeke
code/data similarity 0.49
Abstract · 14 pages, 5 figures, 7 tables, Appendix, For reproducibility code available at https://gitlab.ilabt.imec.be/iwine/ra-pdoa-simulator

Bluetooth Channel Sounding (CS) enables accurate phase-based ranging, but multi-anchor localization requires sequential ranging exchanges that limit scalability and increase measurement latency. This paper proposes Ranging-Assisted Phase Difference of Arrival (RA-PDoA), a scalable BLE localization architecture combining one active anchor performing a standard two-way CS exchange with multiple passive receive-only anchors observing the same transmissions. A channel-recovery framework is derived that enables passive anchors to reconstruct a channel response suitable for super-resolution delay estimation, allowing multipath-robust ranging without participating in a two-way exchange. Coarse arrival-time information is further used to bound the position estimate and reject inconsistent range solutions. A comprehensive evaluation characterizes the impact of multipath propagation, body shadowing, synchronization requirements, oscillator impairments, anchor placement, and deployment inaccuracies, thereby quantifying the practical infrastructure requirements for scalable BLE localization. Simulation results in modeled indoor environments show that RA-PDoA reduces the 90th-percentile localization error from 175.3 cm to 95.5 cm under body shadowing while maintaining an airtime requirement independent of the number of anchors. The results demonstrate that a single active ranging link enables scalable and multipath-robust BLE Channel Sounding localization.

0.30

Adaptive Channel Hopping for IEEE 802.15.4 TSCH-Based Networks: A Dynamic Bernoulli Bandit Approach

cs.NI ·2026-08-21 ·Nastooh Taheri Javan, Masoud Sabaei, Vesal Hakami
publishedhighly cited similarity 0.48
Abstract

In IEEE 802.15.4 standard for low-power low-range wireless communications, only one channel is employed for transmission which can result in increased energy consumption, high network delay and poor packet delivery ratio (PDR). In the subsequent IEEE 802.15.4-2015 standard, a Time-slotted Channel Hopping (TSCH) mechanism has been developed which allows for a periodic yet fixed frequency hopping pattern over 16 different channels. Unfortunately, however, most of these channels are susceptible to high-power coexisting Wi-Fi signal interference and to possibly some other ISM-band transmissions. This interference manifests itself in the form of the presence/absence of other devices with either or both static and dynamic channel selection policies. In order to isolate channels with undesirable conditions, blacklisting mechanisms are defined to adapt the channel hopping process. However, the existing solutions which form blacklists unrealistically assume that the statistical model of the external interference remains fixed, and do not vary over time. In this paper, we realistically assume that the impact of external interferes on 802.15.4 may generally follow a non-stationary pattern, and accordingly formulate the adaptive channel hopping problem as a Dynamic Multi-Armed Bernoulli Bandit (Dynamic MABB) process from the machine learning theory. We then propose an online learning algorithm with track-ability properties for computing an adaptive hopping policy. Simulations confirm that when the statistics of the external interference has a switching regime, the proposed solution outperforms the previous schemes in terms of both energy efficiency as well as two important KPIs for TSCH-based networks, i.e., PDR and latency.

0.62