CS Paper Radar

Adaptive Channel Hopping for IEEE 802.15.4 TSCH-Based Networks: A Dynamic Bernoulli Bandit Approach

Nastooh Taheri Javan, Masoud Sabaei, Vesal Hakami

cs.NI ·submitted 2026-08-21 08:18 UTC · v1
publishedhighly cited

Abstract

In IEEE 802.15.4 standard for low-power low-range wireless communications, only one channel is employed for transmission which can result in increased energy consumption, high network delay and poor packet delivery ratio (PDR). In the subsequent IEEE 802.15.4-2015 standard, a Time-slotted Channel Hopping (TSCH) mechanism has been developed which allows for a periodic yet fixed frequency hopping pattern over 16 different channels. Unfortunately, however, most of these channels are susceptible to high-power coexisting Wi-Fi signal interference and to possibly some other ISM-band transmissions. This interference manifests itself in the form of the presence/absence of other devices with either or both static and dynamic channel selection policies. In order to isolate channels with undesirable conditions, blacklisting mechanisms are defined to adapt the channel hopping process. However, the existing solutions which form blacklists unrealistically assume that the statistical model of the external interference remains fixed, and do not vary over time. In this paper, we realistically assume that the impact of external interferes on 802.15.4 may generally follow a non-stationary pattern, and accordingly formulate the adaptive channel hopping problem as a Dynamic Multi-Armed Bernoulli Bandit (Dynamic MABB) process from the machine learning theory. We then propose an online learning algorithm with track-ability properties for computing an adaptive hopping policy. Simulations confirm that when the statistics of the external interference has a switching regime, the proposed solution outperforms the previous schemes in terms of both energy efficiency as well as two important KPIs for TSCH-based networks, i.e., PDR and latency.

Closest papers

Nearest neighbours by meaning across the whole index.

Finite Blocklength Performance Analysis of Uplink RSMA with Practical Imperfections

eess.SP ·2026-11-10 ·Farjam Karim, Nurul Huda Mahmood, Arthur Sousa de Sena, Deepak Kumar, Matti Latva-aho
published similarity 0.59
Abstract

Future generations of wireless networks will support massive communication and hyper-reliable low-latency communications, which are fundamental to large-scale Internet of Things (IoT) deployments with stringent performance requirements. To support such diverse and demanding requirements, robust and flexible multiple access schemes are essential. In this work, we develop a comprehensive analytical framework for evaluating uplink rate-splitting multiple access (RSMA) in the finite blocklength regime under realistic non-ideal conditions. Specifically, we derive closed-form expressions for the block error rate (BLER) and goodput, accounting for imperfect channel state information at the receiver (CSIR), imperfect successive interference cancellation (SIC), and hardware impairments. To reflect practical wireless environments, we model the channel using Nakagami-m fading model. Our analysis shows that at lower transmit power levels, imperfect CSIR is the dominant performance-limiting factor, whereas hardware impairments and imperfect SIC become more significant in degrading system performance as the transmit power increases. To further understand the system behavior, we derive asymptotic BLER expressions. We also analyze the impact of rate allocation, demonstrating its critical role in ensuring fairness and reliability. Monte Carlo simulations validate our analytical expressions. Notably, our results show that uplink RSMA significantly outperforms NOMA even when RSMA operates under harsh imperfect CSIR. This superiority establishes RSMA as a robust and efficient candidate for future wireless networks in practical, constrained environments

0.29

Contention Resolution with a Fast-but-Fickle Channel

cs.DC ·2026-11-09 ·Umesh Biswas, Vini Chaudhary, Shafqat Hasan, Maxwell Young
theory similarity 0.56
Abstract

The contention-resolution problem studies how $n$ devices share a communication channel without centralized coordination. Classical models typically assume a single continuously available channel and focus on minimizing total completion time. However, modern wireless systems increasingly rely on shared spectrum, where access may be abruptly revoked by incumbent users. Motivated by this setting, we study contention resolution with two channels: a reliable slow channel and a faster channel that can be intermittently disabled by unpredictable eviction periods. Moving a batch of packets from the slow channel to the fast channel incurs a unit cost, while evictions from the fast channel impose a larger per-packet penalty. Our goal is to achieve asymptotically optimal latency while minimizing switching overhead relative to an optimal offline algorithm that knows the eviction schedule. We present Randomized Adaptive Channel Exploitation (RACE), a randomized algorithm that exploits the fast channel when available while maintaining progress on the slow channel during disruptions. When the fast channel has rate $ρ\in \bigl[Ω(\log n), O(\sqrt n)\bigr]$ and a sufficiently large constant-factor resource augmentation, RACE achieves an $O(1)$ competitive ratio for expected latency. RACE's expected switching-cost competitive ratio relative to any optimal-latency offline algorithm OPT is $O(ρ+\sqrt{n/m})$, where $m \geq 1$ is the number of fast-channel availability intervals used by OPT. We also prove a worst-case $Ω(\sqrt n)$ switching-cost competitive ratio for latency-competitive randomized algorithms, and a separate $Ω(ρ)$ switching-cost competitive-ratio lower bound. These lower bounds hold even with fixed constant-factor augmentation on both channels.

0.27

Model-Adaptive and Risk-Constrained Frequency Hopping Against Predictive Jammers

cs.LG eess.SP ·2026-09-06 ·Yanbo Chen, Xinjing Zhou
similarity 0.56
Abstract

Adaptive frequency hopping against predictive jamming must address both model uncertainty and policy exposure: the context-loss relationship may vary across operating regimes, while persistent hopping patterns may expose high-probability channels to attack. We propose D-PACT-AFH, a model-adaptive and risk-constrained adversarial contextual-bandit framework in which a Tsallis-FTRL master combines a global linear learner with a partitioned local learner and selects the model class online. D-PACT-Hit incorporates channel-wise marginal hit risk into model selection, while D-PACT-Safe applies a minimum-Kullback-Leibler projection to enforce a per-slot risk budget. We establish estimator validity under non-anticipating attacks, an oracle decomposition relative to the better fixed base, and an exact conditional-risk guarantee for the Safe projection. Experiments across diverse channel regimes and jammer types demonstrate effective model adaptation and a controllable goodput-risk tradeoff: D-PACT-AFH recovers 95.5% of the local learner's gain under observable switching while avoiding 77.7% of its degradation in a negative-control regime.

0.35

Is Collision-Free Backoff Worth It in Wi-Fi?

cs.NI ·2026-09-03 ·Mohammad Yousefi, Francesc Wilhelmi, Boris Bellalta
similarity 0.55
Abstract · 8 pages, 5 figures, 3 tables. Submitted to the 17th IFIP Wireless and Mobile Networking Conference (WMNC 2026)

The Distributed Coordination Function (DCF)---the underlying channel access protocol in Wi-Fi, based on Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) and Binary Exponential Backoff (BEB)---is simple and effective, but its performance can degrade with increasing contention due to collisions. Collision-free backoff algorithms replace randomization with deterministic channel access, potentially improving efficiency and predictability. But are collision-free methods, with all their implications in terms of protocol design, sufficient to improve Wi-Fi performance under realistic non-full-buffer traffic with both uplink and downlink transmissions? We investigate this question by comparing three collision-free algorithms, CSMA/ECA (ECA), CSMA/E2CA (E2CA), and deterministic backoff (DetBO), with standard and single-stage BEB. Using system-level simulations, we evaluate full-buffer traffic, non-full-buffer ON/OFF traffic with both uplink and downlink transmissions, and coexistence with legacy BEB stations. Under full-buffer traffic, collision-free operation provides only modest throughput gains, up to 6.3\%. With non-full-buffer traffic, delay is governed primarily by the contention window (CW) rather than by collision avoidance, and collision-free access can even degrade performance under downlink-heavy traffic. Stations fall back to a random backoff at least 93\% of the time, so a collision-free schedule rarely forms outside the AP.

0.27

Evaluating Polling Schemes for OFDMA Uplink Scheduling in Time-Sensitive Wi-Fi Networks

cs.NI ·2026-11-13 ·Douglas Dziedzorm Agbeve, Ferhat Van Herck, Andrey Belogaev, Jeroen Famaey
similarity 0.53
Abstract

IEEE 802.11ax introduced orthogonal frequency division multiple access (OFDMA) to improve channel utilization through concurrent multi-user transmissions. For effective uplink (UL) scheduling, the access point (AP) requires timely knowledge of buffered traffic at the stations (STAs). Explicit buffer-status polling provides this, yet each polling round can query only as many STAs as there are resource units (RUs). Scheduled-access, random-access, activity-based, and learning-based schemes address this buffer-status acquisition problem differently and have generally been evaluated in isolation under different conditions, so it remains unclear how they compare across time-sensitive workloads. We evaluate common schemes from the Wi-Fi standard and literature under three time-sensitive environments: a large-scale teleconferencing session, an industrial IoT deployment, and an extended reality (XR) service. The relative performance of the schemes depends strongly on traffic characteristics and offered load. In conferencing, activity-based and learning-based polling perform best, while conventional contention-based access remains competitive under light load. In the industrial scenario, scheduled-access most effectively delivers time-sensitive packets within their deadlines under heavy load, whereas contention-based access performs best under lighter load. In XR, OFDMA-based schemes achieve high video throughput that contention-based access cannot sustain; among them, activity-based polling achieves the lowest deadline-miss ratios for uplink head-tracking traffic, at the expense of longer video delay tails. These findings highlight the importance of selecting channel access and scheduling schemes according to traffic requirements and operating conditions.

0.21

Mobile Backscatter Communication for the Battery-less Internet of Things

cs.NI ·2026-09-01 ·Weining Song, Thiemo Voigt, Stefanos Kaxiras, Yuan Yao, Luca Mottola
published similarity 0.53
Abstract · 11 pages, 20 figures. Extended version of the paper accepted at MSWiM 2026

We enable backscatter communication in the battery-less mobile Internet of Things (IoT). Backscatter communication is extensively studied in static settings. Existing designs are, however, fundamentally mismatched with mobility and time-varying energy patterns. Channel conditions rapidly fluctuate, impacting the achievable data rates and thus transmission costs. Energy availability varies unpredictably, possibly forcing devices to remain quiescent to recharge energy buffers. The two issues compound each other: while recharging, a battery-less mobile IoT device may miss more favorable channel conditions. We design a lightweight decision system that dynamically determines when to transmit by checking short-term trends in signal strength, while using Non-volatile Memory (NVM) to retain packets in unfavorable channel conditions and across energy failures. Using a prototype we built and real-world mobility and power traces, we compare our design against a rate-adaptive baseline that only considers the instantaneous channel conditions. Experimental results show that our system improves throughput by up to 5.16x while reducing transmission energy consumption by up to 47.3%, with only 0.23% - 7.3% additional energy overhead.

0.40

Secure Wireless Information Transfer and Energy Harvesting in HAPS-Based Network

cs.IT eess.SY ·2026-08-23 ·Khaled Humadi, Gunes Karabulut-Kurt, Wessam Ajib, Wei-Ping Zhu
published similarity 0.52
Abstract

High-altitude platform station (HAPS) serves as a promising enabler for wide-area connectivity of low-power wireless devices, particularly in remote and underserved regions. However, the strong line-of-sight characteristics of HAPS links increase the risk of eavesdropping, while the limited energy budget of ground devices remains a major operational constraint. In this work, we propose a secure wireless information and energy harvesting framework for HAPS-based networks in the presence of spatially distributed eavesdroppers. The proposed system integrates friendly jamming and power transfer nodes equipped with null-steering capability antennas, such that they not only degrade the reception quality at eavesdroppers but also act as additional radio-frequency energy sources for legitimate users. A time-switching wireless information and power transfer architecture is adopted at the user side. Under this framework, we derive tractable expressions for the joint rate-energy coverage and the average secrecy rate using stochastic geometry tools. Numerical and Monte Carlo results validate the developed analysis and reveal key design trade-offs among the time allocation factor, null-steering-zone radius around each user, and jammer transmit power. In particular, the results show that properly coordinated null-steering jamming can simultaneously support secure communication and adequate wireless power transfer, while an appropriate choice of system parameters, such as time allocation factor and jamming power, is required to balance harvested energy, communication reliability, and secrecy performance.

0.31

Bounds and Constructions for Optimal Wide-Gap Frequency Hopping Sequences

cs.IT ·2026-11-09 ·Jiwen Zhang, Haitao Cao
unusual similarity 0.52
Abstract

In a frequency-hopping (FH) system, to reduce interference to the received signal, each user's frequency hopping sequence (FHS) shall have wide-gap property. In this paper, we update the upper bounds on the minimum gaps of optimal uniform wide-gap frequency hopping sequences (WGFHS) with parameters $(v,s,λ;e)$ where $v=ks, k\ge 3, λ=k$ and $s\ge k(k-1)+1$ is odd. We completely prove the existence of such WGFHSs for $k\le 3$.

0.27