CS Paper Radar

Retrospective Evaluation of Bluetooth RSSI Fingerprinting for Bin Localization on an Industrial Shop Floor

Saif Lakhani

cs.NI ·submitted 2026-10-15 21:50 UTC · v1

Abstract

This paper evaluates an archival Bluetooth Low Energy received signal strength indicator (RSSI) dataset collected for bin localization on an industrial shop floor. The installation used 24 fixed relays positioned on walls and Bluetooth beacons attached to bins, with each relay applying a Kalman filter to its own readings in firmware before publishing them. The primary survey produced 19,034 usable two-minute fingerprint samples across 90 known positions, with 23 relay measurements available as model features. We compare calibrated path-loss multilateration with two radio-map estimators: distance-weighted $k$-nearest neighbours and Random Forest regression. A random 70/30 row split measures recognition at surveyed positions, while a coordinate-grouped split reserves 27 entire positions for testing and measures interpolation to unseen positions. Random Forest achieved a median error of 0.66~m for surveyed positions, with 77.9% of estimates within 3~m and 96.3% within 10~m. For unseen positions, median error increased to 9.42~m and 55.5% of estimates were within 10~m. Path-loss multilateration produced a 19.41~m median error on unseen positions, close to the 19.62~m mean-position baseline. The results support RSSI fingerprinting for a fixed inventory of surveyed bin positions, but not precise continuous localization between survey points. Git history dates the original implementation to September 7, 2019. The evaluation code in this paper was written in October 2026 and is reported separately from the seven-year-old prototype.

Comment
2 figures, 1 CSV

Closest papers

Nearest neighbours by meaning across the whole index.

Interference-Aware Tone Selection for Bluetooth Channel Sounding

cs.NI ·2026-11-17 ·Taewoo Kim, Vishrant Tripathi
similarity 0.60
Abstract

Bluetooth Channel Sounding enables distance estimation using phase measurements across multiple frequencies. However, coexistence with Wi-Fi and other 2.4 GHz radios can fragment the available frequency band, making reliable ranging difficult when only a limited number of tones can be selected. Drawing on sparse antenna-array theory, we show that interference avoidance alone is insufficient: the spacing of selected tones can introduce repeated peaks in the ranging response, leading to estimation errors. We propose a lightweight, interference-aware tone-selection method that jointly considers frequency occupancy, tone spacing, and frequency span. Our method constructs a 15-tone map using a three-step rule without ranging measurements, ground-truth distance, or online candidate-map search. We evaluate the method using simulations of 900 indoor environments, a public Bluetooth Channel Sounding dataset, and measurements from commercial Nordic nRF54L15 hardware. Compared with random interference avoiding baseline, our proposed method improves ranging success percentage by 39 points under mixed interference, 29 points on the public dataset, and 82 points in hardware experiments. These results demonstrate the importance of tone selection for practical Bluetooth Channel Sounding.

0.19

Device-Centric Cooperative Floor-Level Estimation under Sparse Anchor Deployment for Construction-Site Applications

eess.SP ·2026-11-17 ·Jiaxu Liang, Zhuoran Li, Osamu Muta, Haruto Morokuma, Naohiro Ikeda +1 more
similarity 0.60
Abstract

For construction-site applications in multi-story buildings, accurate floor-level estimation is important for tracking workers, equipment, and Internet of Things (IoT) devices. In buildings under construction, communication infrastructure and power-supply facilities are often limited and the indoor environment changes as construction progresses, making localization systems that rely on dense wireless infrastructure or fingerprint databases difficult to deploy and maintain. Low-power wide-area (LPWA) communication can provide wide-area coverage with a small number of temporarily deployed access points (APs), but under sparse AP deployment, AP-to-terminal observations alone may provide insufficient floor-related information for reliable floor-level estimation. To address this problem, this paper develops a device-centric cooperative floor-level estimation method that exploits inter-terminal observations as relative floor-difference information to complement AP-side information. For practical application with limited measurement data, AP-to-terminal observations are represented by an upper/lower-AP RSS contrast, while inter-terminal observations are statistically modeled according to floor-difference classes. The resulting AP-side and pairwise scores are combined in a weighted floor-label objective and approximately optimized using dual-order sequential iterated conditional modes (ICM). Ray-tracing simulations and LoRa measurement experiments demonstrate the effectiveness of the proposed method under different AP deployments and terminal-selection limits.

0.27

Ray-Traced Augmentation for Signal Strength Based Localization

cs.NI ·2026-08-24 ·Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian
similarity 0.60
Abstract · 28 pages

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

0.13

Dataset and Experimental Testbed for Deep Learning-Based Bluetooth Device Fingerprinting

eess.SP cs.CR ·2026-10-30 ·Haytham Albousayri, Bechir Hamdaoui
similarity 0.58
Abstract · 6-page paper; accepted and presented at the Experimental Research on Networking (ERN 2026) workshop, part of 17th International Conference o…

AI-enabled wireless networks have emerged as vital components of future-generation wireless communication systems. Among various wireless architectures, Bluetooth Low Energy (BLE) networks have attracted significant research interest due to their widespread adoption and low cost. In these networks, deep learning (DL) models can be integrated directly into the physical-layer infrastructure to perform diverse tasks, including environment sensing, localization, radio frequency fingerprinting (RFFP), and signal denoising. While highly effective under their original training configurations, these DL models often fail significantly when deployed in unseen environments---such as different rooms, varying temperature conditions, or altered carrier frequencies. Addressing this limitation requires rigorous benchmarking of models and algorithms against unseen configurations to evaluate their generalization and robustness. To bridge this gap, this paper makes two key contributions: i) we introduce a comprehensive, large-scale wireless BLE dataset consisting of raw IQ transmissions from 31 distinct commercial devices captured across diverse days, locations, environments, temperatures, receiver hardware, and frequency channels; ii) we present a case study evaluating state-of-the-art techniques for domain-robust RFFP to advance real-world AI reliability.

0.28

Analytical Modeling of Latency and Energy Trade-offs in FiRa-Like BLE-UWB Ranging and Localization Systems

cs.NI ·2026-10-24 ·Adelina Giurea, Jorg Wieme, Ben Van Herbruggen, Jeroen Hoebeke, Eli De Poorter
similarity 0.57
Abstract · submitted to IEEE Transactions on Mobile Computing

Accurate position and distance information provided by Ultra-Wideband (UWB) can enhance a wide range of applications. However, its receive-mode power consumption makes continuous channel monitoring impractical for energy-constrained devices. Consequently, UWB systems often rely on Bluetooth Low Energy (BLE) to discover peers and establish sessions before ranging begins. Although both technologies have been studied in isolation, an framework capturing the latency and energy consumption of the complete workflow is still lacking. To address this gap, we develop a unified analytical model for BLE-assisted UWB systems, from device-to-device ranging to infrastructure-based localization. The model includes closed-form expressions for discovery, parameter exchange, and ranging, and evaluates the resulting latency and energy consumption. Evaluation of three representative BLE configurations shows that the scanner consumes 28-57x more energy per discovery than the advertiser. In addition, the 99th-percentile discovery latency is 2-3.4x higher than the mean and reaches up to 110 s in the lowest-power configuration. The one-time BLE setup overhead is amortized after 24-562 ranging rounds, depending on the discovery configuration. Overall, the analysis demonstrates that the BLE discovery phase can dominate both the latency and the energy budget during short UWB interactions, making discovery configuration as important as the ranging scheme.

0.25

Integrated Sensing and Communication via Channel Knowledge Maps Built from Beam Feedback Coefficients

eess.SP ·2026-10-29 ·Chongda Huang, Yue Xiao, Gang Wu, Vladimir Poulkov, Xianfu Lei +1 more
similarity 0.57
Abstract

Channel knowledge maps (CKMs) support wireless localization by linking channel features to user locations. Detailed channel fingerprints, however, can require substantial storage. This paper proposes a CKM-based localization framework that uses beam feedback coefficients collected during communication. These coefficients serve as compact location fingerprints within the beam management process, without requiring full channel feedback or additional sensing measurements. Using a coarse position prior, the base station searches nearby CKM entries and refines the location estimate through local interpolation. We analyze the relationship between spatial fingerprint variation and localization accuracy, and evaluate the effect of feedback quantization. Simulations show favorable storage--accuracy trade-offs relative to dense and sparsified spectral fingerprinting in the tested multipath environments.

0.33

IMU-Aided Correction of Orientation-Induced Ranging Error in Bluetooth Channel Sounding on Commercial Hardware

eess.SY ·2026-09-01 ·Mihir Bapat, Santosh Nagaraj
similarity 0.56
Abstract

Bluetooth Low Energy Channel Sounding (BLE CS), standardized in Bluetooth Core Specification 6.0 (September 2024), enables distance estimation via phase-based ranging (PBR) and round-trip time (RTT). Although prior work has studied CS accuracy in configurations with a fixed orientation, no published work has studied how device orientation affects ranging error on commercial hardware. We present the first study of orientation-induced CS ranging error and a Machine Learning correction using IMU features. This study used the EFR32xG24 Channel Sounding Development Kit, the only commercial CS platform with an integrated six-axis Inertial Measurement Unit (IMU). Our results show that device orientation has a substantial effect on CS ranging accuracy; we found that a Random Forest model trained on the IMU derived orientation achieved a 74.6\% Mean Absolute Error (MAE) reduction under a Leave One Orientation Out Evaluation, demonstrating that IMU readings have potential to improve ranging accuracy.

0.18

From Least Squares to Deep Learning: Benchmarking Indoor Positioning on the HYMN Multi-Technology Dataset

eess.SP ·2026-09-22 ·Paul Schwarzbach, Muhammad Ammad
code/data similarity 0.56
Abstract

Indoor positioning benchmarks rarely co-locate multiple technologies with high-accuracy ground truth, limiting cross-method and cross-technology comparison. We evaluate four range-based positioning methods on fused Ultra-wideband, Bluetooth Low Energy, and WiFi ranges recorded at 48 reference points in an industrial facility with available ground truth. The evaluated methods range from least-squares positioning, with and without robust weighting, through a Bayesian grid filter to a ResNet regressor that we report under two protocols, interpolation and spatial generalisation. Per-technology ranging quality spans roughly two orders of magnitude, which caps any geometry-based solver that weighs anchors equivalently. On fused input the grid filter is competitive with deep learning on median error, while the ResNet's advantage concentrates on the upper tail. Holding reference points out of training increases the learned regressor's median error several-fold, exposing a spatial-generalisation penalty invisible under random splits. The dataset and evaluation code are publicly available.

0.20