CS Paper Radar

Device-Centric Cooperative Floor-Level Estimation under Sparse Anchor Deployment for Construction-Site Applications

Jiaxu Liang, Zhuoran Li, Osamu Muta, Haruto Morokuma, Naohiro Ikeda, Takamasa Kitanouma

eess.SP ·submitted 2026-11-17 04:19 UTC · v1

Abstract

For construction-site applications in multi-story buildings, accurate floor-level estimation is important for tracking workers, equipment, and Internet of Things (IoT) devices. In buildings under construction, communication infrastructure and power-supply facilities are often limited and the indoor environment changes as construction progresses, making localization systems that rely on dense wireless infrastructure or fingerprint databases difficult to deploy and maintain. Low-power wide-area (LPWA) communication can provide wide-area coverage with a small number of temporarily deployed access points (APs), but under sparse AP deployment, AP-to-terminal observations alone may provide insufficient floor-related information for reliable floor-level estimation. To address this problem, this paper develops a device-centric cooperative floor-level estimation method that exploits inter-terminal observations as relative floor-difference information to complement AP-side information. For practical application with limited measurement data, AP-to-terminal observations are represented by an upper/lower-AP RSS contrast, while inter-terminal observations are statistically modeled according to floor-difference classes. The resulting AP-side and pairwise scores are combined in a weighted floor-label objective and approximately optimized using dual-order sequential iterated conditional modes (ICM). Ray-tracing simulations and LoRa measurement experiments demonstrate the effectiveness of the proposed method under different AP deployments and terminal-selection limits.

Closest papers

Nearest neighbours by meaning across the whole index.

Retrospective Evaluation of Bluetooth RSSI Fingerprinting for Bin Localization on an Industrial Shop Floor

cs.NI ·2026-10-15 ·Saif Lakhani
similarity 0.60
Abstract · 2 figures, 1 CSV

This paper evaluates an archival Bluetooth Low Energy received signal strength indicator (RSSI) dataset collected for bin localization on an industrial shop floor. The installation used 24 fixed relays positioned on walls and Bluetooth beacons attached to bins, with each relay applying a Kalman filter to its own readings in firmware before publishing them. The primary survey produced 19,034 usable two-minute fingerprint samples across 90 known positions, with 23 relay measurements available as model features. We compare calibrated path-loss multilateration with two radio-map estimators: distance-weighted $k$-nearest neighbours and Random Forest regression. A random 70/30 row split measures recognition at surveyed positions, while a coordinate-grouped split reserves 27 entire positions for testing and measures interpolation to unseen positions. Random Forest achieved a median error of 0.66~m for surveyed positions, with 77.9% of estimates within 3~m and 96.3% within 10~m. For unseen positions, median error increased to 9.42~m and 55.5% of estimates were within 10~m. Path-loss multilateration produced a 19.41~m median error on unseen positions, close to the 19.62~m mean-position baseline. The results support RSSI fingerprinting for a fixed inventory of surveyed bin positions, but not precise continuous localization between survey points. Git history dates the original implementation to September 7, 2019. The evaluation code in this paper was written in October 2026 and is reported separately from the seven-year-old prototype.

0.24

Ray-Traced Augmentation for Signal Strength Based Localization

cs.NI ·2026-08-24 ·Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian
similarity 0.58
Abstract · 28 pages

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

0.13

Meter-Level Wi-Fi RTT Localization on a Production Enterprise WLAN

cs.NI ·2026-09-12 ·Enguang Fan, Binh Minh Tran, Klara Nahrstedt
top venue similarity 0.58
Abstract

Wi-Fi Fine Time Measurement (FTM) promises indoor localization by reusing access points (APs) already deployed for connectivity, but prior evaluations mostly use APs purpose-deployed or calibrated for ranging, leaving it unclear whether a production enterprise WLAN can provide useful localization without localization-specific infrastructure. We evaluate Wi-Fi round-trip time (RTT) localization on IllinoisNet, a live campus WLAN whose APs were placed for coverage and capacity. Using five commodity Android phones at 10 static locations across a 50 m x 30 m office floor spanning LOS, NLOS, and multipath conditions, weighted nonlinear least squares achieves a median error of 1.21 m and a 90th-percentile error of 2.68 m, with no AP replacement, repositioning, or ranging calibration. Residuals vary in magnitude and sign across APs and propagation conditions, suggesting a single global correction is insufficient and motivating AP-aware software calibration rather than new localization-specific infrastructure.

0.51

Scene Reconstruction Using Ubiquitous Wireless Signals via Diffusion Posterior Inference Over physics-Grounded Representations

cs.LG ·2026-10-15 ·Vahid Yazdnian, Yasaman Ghasempour
similarity 0.56
Abstract

Knowing the layout of the physical world matters for many applications, yet the sensors we rely on for it (e.g., cameras and LiDAR) can fail in darkness, in adverse weather, or behind walls. Wireless signals do not face these limitations: every link between a base station and a user is shaped by the buildings it passes, reflects from, or is blocked by, leaving information about the surrounding scene embedded in the wireless channel measured at the endpoints. However, mapping channel measurements to the environment is a severely ill-posed problem: a measurement records only the structures that interact with the transmitted electromagnetic waves along its propagation paths, and even these observations can often be explained by multiple plausible scenes. We therefore formulate wireless scene reconstruction as posterior inference and develop a hierarchical framework with two complementary stages to approach this problem. A wireless foundation model, pretrained to respect propagation physics, transforms each channel measurement into a representation of the scene structure that shaped the observation. A diffusion model then jointly integrates representations from multiple measurements to model and sample the posterior over building occupancy, with consensus over samples producing the final reconstruction. We demonstrate that the framework can accurately recover building footprints from wireless channel measurements alone and show that its performance depends critically on both design components: physics-grounded representations expose scene-relevant information, while joint posterior inference coherently integrates complementary observations.

0.17

Data-Driven Case Study of gNB Placement Optimization in a Private Indoor 5G Testbed

cs.NI ·2026-09-01 ·Diogo de O. Soares, Victor F. Monteiro, Fco. Rodrigo P. Cavalcanti, Vicente A. de Sousa, J. Pedro B. Lima
published similarity 0.56
Abstract · XLIV Brazilian Symposium on Telecommunications and Signal Processing - SBrT 2026

Accurate radio planning is a fundamental requirement for the deployment of wireless networks in indoor environments, where signal propagation is strongly affected by walls, partitions, and other structural obstacles. Despite the availability of standardized propagation models, their ability to represent the characteristics of specific deployment scenarios is often limited, motivating the use of measurement-driven approaches. In this context, this paper presents a data-driven case study of next generation NodeB (gNB) placement optimization in an office using measurements collected from an experimental fifth generation (5G) testbed. A propagation model is trained from reference signal received power (RSRP) measurements using distance and wall count as input features and integrated with a combinatorial search framework. The proposed workflow is used to evaluate alternative deployment strategies under different optimization criteria. Results indicate that satisfactory indoor coverage and improved cell-edge conditions can be achieved with a small number of gNBs.

0.30

Resource-Aware Model Selection for Scalable Indoor Localization on HPC Platforms

cs.DC ·2026-09-24 ·Fukuharu Tanaka, Hamada Rizk, Moustafa Youssef, Hirozumi Yamaguchi
published similarity 0.55
Abstract · 20 pages, 15 figures. Accepted for publication in 38th IEEE/SBC International Symposium on Computer Architecture and High Performance Comput…

Large-scale indoor localization is increasingly needed in campuses, smart buildings, factories, and digital-twin infrastructures, where wireless conditions, access-point deployments, and spatial layouts evolve over time. Such systems must be accurate, extendable, and maintainable, allowing new buildings, floors, rooms, and service areas to be added without retraining a monolithic model. Modular learning-based localization supports this goal by assigning independent models to buildings, floors, and fine-grained spatial regions. However, this extendability introduces a high-performance inference challenge: each query may require selecting and executing among hundreds or thousands of local models, making exhaustive inference costly in computation, accelerator memory residency, model loading, and scheduling. This paper presents a resource-aware modular inference framework for WiFi fingerprint-based indoor localization on high-performance and distributed computing platforms. The framework organizes local autoencoder models into a building-floor-spot hierarchy and formulates localization as model selection over a large pretrained model ensemble. To reduce inference cost under resource constraints, we introduce two lightweight execution-pruning strategies: Hierarchical Candidate Pruning, which performs coarse-to-fine model selection, and Trajectory-Aware Pruning, which uses temporal locality in user movement to restrict inference to spatially plausible neighboring models. Experiments on a real-world dataset demonstrate that the proposed framework delivers scalable inference without sacrificing localization quality. Compared with exhaustive evaluation over 735 spot models, Hierarchical Candidate Pruning requires only 67 model evaluations, while Trajectory-Aware Pruning reduces this number to just 10, cutting model executions by 98.6%.

0.28

SlugTrails: An Egocentric Benchmark for Floor Plan Localization in Large Buildings

cs.CV ·2026-09-17 ·Yunqian Cheng, Roberto Manduchi
benchmarkdatasetcode/datahot direction similarity 0.54
Abstract · 8 pages, 4 figures. Preprint. Code and data: https://github.com/Head-inthe-Cloud/SlugTrails

Floor-plan-based indoor visual localization enables infrastructure-free positioning, but most methods are developed and evaluated in small residential environments unlike the large public buildings of real deployment. We introduce SlugTrails, a floor plan localization benchmark for large indoor spaces under realistic egocentric sensing: $30$ Hz Aria glasses recordings across three campus buildings and six floors ($22089$ m$^2$ of floor plan outline), CAD-derived floor plans with semantic classes and circulation space masks, and trajectories aligned into the floor plan frame using laser-surveyed anchors. One protocol covers three practical ways of gathering geometry under a limited field of view -- a single walking frame, a stationary multi-view sweep, and a walking stream with odometry -- so methods designed for different regimes are compared on the same buildings and ground truth. Evaluating five representative geometric and learned systems under their native sensing configurations, we find that stock checkpoints (official released weights) are near zero on SlugTrails (at most $0.004$ R@1m30$^{\circ}$ on walking single frames), while fine-tuning on SlugTrails improves every trainable family on all three tasks (e.g., F$^3$Loc $0.0 \rightarrow 0.141$ single-frame and $0.03 \rightarrow 0.66$ sequential), with gains compounding as observations accumulate. The same fine-tuned weights also improve cross-dataset generalization on LaMAR with no LaMAR training (sequential R@1m $0.048 \rightarrow 0.143$ for F$^3$Loc and $0.063 \rightarrow 0.127$ for UnLoc), whereas train-from-scratch on SlugTrails alone stays far below fine-tuning from stock weights -- evidence that floor plan localization is currently limited by indoor data rather than by architecture. We release the dataset, protocols, and tools at https://github.com/Head-inthe-Cloud/SlugTrails.

0.53

From Least Squares to Deep Learning: Benchmarking Indoor Positioning on the HYMN Multi-Technology Dataset

eess.SP ·2026-09-22 ·Paul Schwarzbach, Muhammad Ammad
publishedcode/data similarity 0.54
Abstract

Indoor positioning benchmarks rarely co-locate multiple technologies with high-accuracy ground truth, limiting cross-method and cross-technology comparison. We evaluate four range-based positioning methods on fused Ultra-wideband, Bluetooth Low Energy, and WiFi ranges recorded at 48 reference points in an industrial facility with available ground truth. The evaluated methods range from least-squares positioning, with and without robust weighting, through a Bayesian grid filter to a ResNet regressor that we report under two protocols, interpolation and spatial generalisation. Per-technology ranging quality spans roughly two orders of magnitude, which caps any geometry-based solver that weighs anchors equivalently. On fused input the grid filter is competitive with deep learning on median error, while the ResNet's advantage concentrates on the upper tail. Holding reference points out of training increases the learned regressor's median error several-fold, exposing a spatial-generalisation penalty invisible under random splits. The dataset and evaluation code are publicly available.

0.28