CS Paper Radar

Data-Driven Case Study of gNB Placement Optimization in a Private Indoor 5G Testbed

Diogo de O. Soares, Victor F. Monteiro, Fco. Rodrigo P. Cavalcanti, Vicente A. de Sousa, J. Pedro B. Lima

cs.NI ·submitted 2026-09-01 16:40 UTC · v1
published

Abstract

Accurate radio planning is a fundamental requirement for the deployment of wireless networks in indoor environments, where signal propagation is strongly affected by walls, partitions, and other structural obstacles. Despite the availability of standardized propagation models, their ability to represent the characteristics of specific deployment scenarios is often limited, motivating the use of measurement-driven approaches. In this context, this paper presents a data-driven case study of next generation NodeB (gNB) placement optimization in an office using measurements collected from an experimental fifth generation (5G) testbed. A propagation model is trained from reference signal received power (RSRP) measurements using distance and wall count as input features and integrated with a combinatorial search framework. The proposed workflow is used to evaluate alternative deployment strategies under different optimization criteria. Results indicate that satisfactory indoor coverage and improved cell-edge conditions can be achieved with a small number of gNBs.

Comment
XLIV Brazilian Symposium on Telecommunications and Signal Processing - SBrT 2026

Closest papers

Nearest neighbours by meaning across the whole index.

A Framework for Enterprise Network Dimensioning

cs.IT ·2026-08-19 ·Gourab Ghatak
top venue similarity 0.63
Abstract

We study radio node (RN) placement for indoor enterprise networks. Using stochastic geometry (SG), we derive the meta-distribution (MD) of the SINR for a test user equipment (UE), with and without cooperation from outdoor macro base stations (MBSs), and compare these results with an integer linear programming (ILP) approach. SG provides an estimate of the required number of RNs but not their locations, while ILP can yield inaccurate local optima and requires high computational power. To address this, we investigate clustering-based algorithms for initializing RN locations using UE location distributions. Along with standard methods, we propose a weighted $k$-harmonic means (WKHM) clustering strategy tailored to maximize SINR. We then introduce a constrained sequential minimum cut algorithm, \texttt{SeqMinCut}, to merge multiple RNs into larger cells and further improve SINR. This is the first work that integrates SG-based statistical analysis, optimization, and clustering to obtain system design insights, dimensioning rules, and planning strategies for enterprise 5G.

0.37

Optimal Measurement Point Selection for Radio Environment Maps: A Two-Stage Approach

eess.SP ·2026-08-11 ·Bastian Perner, Friedemann Laue, Maximilian Lubke, Norman Franchi
published similarity 0.62
Abstract · accepted at IEEE PIMRC 2026

Electromagnetic (EM) situational awareness is essential for the deployment and operation of local and temporary non-public networks (NPNs). Radio Environment Maps (REMs) provide an effective basis for network planning and operation by capturing the prevailing EM conditions. However, efficient measurement location selection for REM construction remains a key challenge, particularly under strict time and cost constraints. This paper presents a two-stage measurement selection framework that employs Optimal Experimental Design (OED)-based strategies to generate a reduced candidate set during a pre-selection phase. In a subsequent optimization stage, combinatorial optimization is applied to select an improved subset of measurement locations by minimizing the Mean Absolute Error (MAE) of the resulting REM, using a scenario-specific propagation simulation model. The results demonstrate that the proposed framework reduces the number of required measurement locations while consistently improving REM construction accuracy across all evaluated strategies. Validation using real-world measurement data confirms the practical applicability of the approach, with the optimization stage achieving MAE reductions from about 4% to around 50%, independent of the chosen pre-selection strategy.

0.23

Towards Environment-Aware 6G Network Planning: An Any-to-Any Channel Knowledge Map Approach

eess.SP ·2026-11-18 ·Yilong Chen, Jiaxuan Li, Yuan Guo, Wenhai Lai, Xinhao Li +5 more
similarity 0.59
Abstract

Planning sixth-generation (6G) networks for reliable coverage across diverse environments is challenging, as it requires channel knowledge between candidate network node locations and potential service regions. This article proposes an environment-aware network planning framework based on any-to-any (X2X) channel knowledge maps (CKMs), which characterize channels between arbitrary transmitter-receiver location pairs. Within this framework, we first construct X2X CKMs from environmental information, sparse channel measurements, or both, with map types and spatial resolutions selected according to the planning task. We then use these maps to predict coverage and optimize network deployment and configuration subject to service requirements and practical constraints, while accounting for subsequent network operation. Finally, field measurements assess channel prediction accuracy and deployment performance, providing feedback for CKM correction and deployment refinement. We discuss implementation methods and tradeoffs across these stages. Case studies illustrate the effectiveness of the framework for indoor intelligent reflecting surface (IRS) deployment and outdoor base station (BS) deployment. Live-network trials further demonstrate coverage gains from IRS deployment and BS reconfiguration, with measurement feedback supporting CKM calibration and configuration refinement.

0.16

Beyond RSRP: An Exploration of Alternative Metrics for Beam Management in an Urban Micro 5G NR Scenario

eess.SP ·2026-11-17 ·Saakshi Gupta, Tarun S. Cousik, Pratheek Upadhyaya, Nishith Tripathi, Jeffery Reed +1 more
similarity 0.56
Abstract

Reference Signal Received Power (RSRP) is widely used for beam selection in 5G NR as it is an easy indicator of path loss, but is not interference-aware, limiting its effectiveness in dense deployments. In this paper, we explore RSRP, Reference Signal Received Quality (RSRQ), and Signal to Interference-plus-Noise Ratio (SINR) as beam selection metrics alongside three UE-gNB association strategies in a 3GPP-compliant Urban Micro multi-cell simulation, benchmarked against Regularized Zero-Forcing (RZF) full-Channel State Information (CSI) upper bounds. Using a 3GPP-compliant Urban Micro multi-cell simulation benchmarked against RZF full-CSI upper bounds, we demonstrate two findings: directional RSRQ, despite its inter-cell interference awareness, is the worst-performing strategy in symmetric interference, and sequential association outperforms power-optimal Hungarian assignment. We also establish that the residual performance gap to full-CSI precoding stems from codebook quantization rather than metric imperfection, identifying adaptive codebook design as a mechanism to enhance performance.

0.26

Site-Specific Cell Shaping: An Agentic Framework

eess.SY ·2026-11-14 ·Zhuo Xu, Zhaolin Wang, Yuanwei Liu
benchmark similarity 0.56
Abstract

An agentic framework is proposed for cell shaping in future sixth-generation (6G) wireless network planning. Cell shaping controls the coverage and interferences of base stations (BSs) through antenna parameters configuration, providing an important means of improving coverage. In contrast to conventional approaches that reply on costly performance evaluations, the proposed framework achieves intelligent and efficient antenna configuration through a perception-reasoning-reflection loop. Specifically, a Configuration Agent combines scene information, evaluation history, and reflection feedback to generate antenna configuration proposals. Then, a ray tracing(RT)-based evaluator assesses these proposals and returns a structured performance summary. Next, a Reflection Agent interprets these results to diagnose site-specific performance deficiencies, recommend feasible configuration adjustments, and accumulate conditional experience. Through this iterative process, the framework accumulates site-specific experience and progressively refines antenna configurations without human-in-the-loop intervention. Simulations in real-world urban scenarios demonstrate that the proposed framework achieves lower outage probabilities than the considered benchmark methods, highlighting the effectiveness of agentic reasoning and reflection in translating site-specific performance feedback and accumulated experience into adaptive antenna configuration decisions.

0.16

Physics-Guided Bayesian Optimization for High-Dimensional Mixed-Variable MIMO Base Station Design

eess.SP cs.NI ·2026-10-01 ·Koki Kanzaki, Koya Sato
similarity 0.56
Abstract · 6 pages, 4 figures. This work has been submitted to the IEEE for possible publication

This paper proposes a physics-guided Bayesian optimization for high-dimensional mixed-variable multiple-input and multiple-output (MIMO) base station (BS) design. The considered problem jointly selects a subset of candidate sites for BS deployment and optimizes the azimuth angles, downtilt angles, and transmit power spectral densities of the BSs, while each configuration is evaluated using computationally expensive site-specific ray tracing. To efficiently optimize the system configuration, the proposed method constructs a low-cost physics-based proxy from precomputed propagation information. The proxy-estimated communication coverage is used as the Gaussian process (GP) prior mean, and a residual GP with three-dimensional physical features learns the discrepancy between the proxy and full evaluations. Ray-tracing-based evaluations in two urban scenarios show that the proposed method achieves up to approximately 15 percentage points higher coverage than conventional and high-dimensional optimization baselines under the same evaluation budget.

0.28

Device-Centric Cooperative Floor-Level Estimation under Sparse Anchor Deployment for Construction-Site Applications

eess.SP ·2026-11-17 ·Jiaxu Liang, Zhuoran Li, Osamu Muta, Haruto Morokuma, Naohiro Ikeda +1 more
similarity 0.56
Abstract

For construction-site applications in multi-story buildings, accurate floor-level estimation is important for tracking workers, equipment, and Internet of Things (IoT) devices. In buildings under construction, communication infrastructure and power-supply facilities are often limited and the indoor environment changes as construction progresses, making localization systems that rely on dense wireless infrastructure or fingerprint databases difficult to deploy and maintain. Low-power wide-area (LPWA) communication can provide wide-area coverage with a small number of temporarily deployed access points (APs), but under sparse AP deployment, AP-to-terminal observations alone may provide insufficient floor-related information for reliable floor-level estimation. To address this problem, this paper develops a device-centric cooperative floor-level estimation method that exploits inter-terminal observations as relative floor-difference information to complement AP-side information. For practical application with limited measurement data, AP-to-terminal observations are represented by an upper/lower-AP RSS contrast, while inter-terminal observations are statistically modeled according to floor-difference classes. The resulting AP-side and pairwise scores are combined in a weighted floor-label objective and approximately optimized using dual-order sequential iterated conditional modes (ICM). Ray-tracing simulations and LoRa measurement experiments demonstrate the effectiveness of the proposed method under different AP deployments and terminal-selection limits.

0.26

Ray-Traced Augmentation for Signal Strength Based Localization

cs.NI ·2026-08-24 ·Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian
similarity 0.55
Abstract · 28 pages

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

0.13