CS Paper Radar

Optimal Measurement Point Selection for Radio Environment Maps: A Two-Stage Approach

Bastian Perner, Friedemann Laue, Maximilian Lubke, Norman Franchi

eess.SP ·submitted 2026-08-11 09:08 UTC · v1
published

Abstract

Electromagnetic (EM) situational awareness is essential for the deployment and operation of local and temporary non-public networks (NPNs). Radio Environment Maps (REMs) provide an effective basis for network planning and operation by capturing the prevailing EM conditions. However, efficient measurement location selection for REM construction remains a key challenge, particularly under strict time and cost constraints. This paper presents a two-stage measurement selection framework that employs Optimal Experimental Design (OED)-based strategies to generate a reduced candidate set during a pre-selection phase. In a subsequent optimization stage, combinatorial optimization is applied to select an improved subset of measurement locations by minimizing the Mean Absolute Error (MAE) of the resulting REM, using a scenario-specific propagation simulation model. The results demonstrate that the proposed framework reduces the number of required measurement locations while consistently improving REM construction accuracy across all evaluated strategies. Validation using real-world measurement data confirms the practical applicability of the approach, with the optimization stage achieving MAE reductions from about 4% to around 50%, independent of the chosen pre-selection strategy.

Comment
accepted at IEEE PIMRC 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Data-Driven Case Study of gNB Placement Optimization in a Private Indoor 5G Testbed

cs.NI ·2026-09-01 ·Diogo de O. Soares, Victor F. Monteiro, Fco. Rodrigo P. Cavalcanti, Vicente A. de Sousa, J. Pedro B. Lima
published similarity 0.62
Abstract · XLIV Brazilian Symposium on Telecommunications and Signal Processing - SBrT 2026

Accurate radio planning is a fundamental requirement for the deployment of wireless networks in indoor environments, where signal propagation is strongly affected by walls, partitions, and other structural obstacles. Despite the availability of standardized propagation models, their ability to represent the characteristics of specific deployment scenarios is often limited, motivating the use of measurement-driven approaches. In this context, this paper presents a data-driven case study of next generation NodeB (gNB) placement optimization in an office using measurements collected from an experimental fifth generation (5G) testbed. A propagation model is trained from reference signal received power (RSRP) measurements using distance and wall count as input features and integrated with a combinatorial search framework. The proposed workflow is used to evaluate alternative deployment strategies under different optimization criteria. Results indicate that satisfactory indoor coverage and improved cell-edge conditions can be achieved with a small number of gNBs.

0.30

Towards Environment-Aware 6G Network Planning: An Any-to-Any Channel Knowledge Map Approach

eess.SP ·2026-11-18 ·Yilong Chen, Jiaxuan Li, Yuan Guo, Wenhai Lai, Xinhao Li +5 more
similarity 0.59
Abstract

Planning sixth-generation (6G) networks for reliable coverage across diverse environments is challenging, as it requires channel knowledge between candidate network node locations and potential service regions. This article proposes an environment-aware network planning framework based on any-to-any (X2X) channel knowledge maps (CKMs), which characterize channels between arbitrary transmitter-receiver location pairs. Within this framework, we first construct X2X CKMs from environmental information, sparse channel measurements, or both, with map types and spatial resolutions selected according to the planning task. We then use these maps to predict coverage and optimize network deployment and configuration subject to service requirements and practical constraints, while accounting for subsequent network operation. Finally, field measurements assess channel prediction accuracy and deployment performance, providing feedback for CKM correction and deployment refinement. We discuss implementation methods and tradeoffs across these stages. Case studies illustrate the effectiveness of the framework for indoor intelligent reflecting surface (IRS) deployment and outdoor base station (BS) deployment. Live-network trials further demonstrate coverage gains from IRS deployment and BS reconfiguration, with measurement feedback supporting CKM calibration and configuration refinement.

0.16

Physics-Guided Bayesian Optimization for High-Dimensional Mixed-Variable MIMO Base Station Design

eess.SP cs.NI ·2026-10-01 ·Koki Kanzaki, Koya Sato
similarity 0.57
Abstract · 6 pages, 4 figures. This work has been submitted to the IEEE for possible publication

This paper proposes a physics-guided Bayesian optimization for high-dimensional mixed-variable multiple-input and multiple-output (MIMO) base station (BS) design. The considered problem jointly selects a subset of candidate sites for BS deployment and optimizes the azimuth angles, downtilt angles, and transmit power spectral densities of the BSs, while each configuration is evaluated using computationally expensive site-specific ray tracing. To efficiently optimize the system configuration, the proposed method constructs a low-cost physics-based proxy from precomputed propagation information. The proxy-estimated communication coverage is used as the Gaussian process (GP) prior mean, and a residual GP with three-dimensional physical features learns the discrepancy between the proxy and full evaluations. Ray-tracing-based evaluations in two urban scenarios show that the proposed method achieves up to approximately 15 percentage points higher coverage than conventional and high-dimensional optimization baselines under the same evaluation budget.

0.28

Ray Tracing-Based LoRaWAN Gateway Placement for Reliable Connectivity in Amazonian Regions

cs.NI ·2026-08-31 ·Cláudio Modesto, Lucas Mozart, Cleverson Nahum, Bruno Castro, Aldebaro Klautau
similarity 0.57
Abstract · 5 pages, 2 tables and 5 figures

Network planning is an important task in wireless communications, as it helps network operators avoid unnecessary costs. In the context of the internet of things, using long-range wide-area network technologies in the Amazon rainforest, a key challenge is ensuring reliable communication between end-devices and gateways (GWs). In this sense, this reliability is strongly affected by channel conditions. Thus, during the planning phase, choosing the appropriate channel model is an important decision for accurate simulations. Given this motivation, in this work, we propose an optimization model to evaluate the impact of different types of channels on coverage and packet delivery ratio in a forest scenario. We used channels from ray tracing, empirical, and stochastic approaches to assess how decisions made during the network planning phase, in terms of the channel used, affect GW placement and, specifically, the percentage of end-devices covered and the reliability of the communication system. Our results show that GW placement based on site-independent channels can overestimate the number of GWs required to meet the network requirements, whereas using site-specific channels allows us to satisfy the same requirements with fewer GWs.

0.36

A Framework for Enterprise Network Dimensioning

cs.IT ·2026-08-19 ·Gourab Ghatak
top venue similarity 0.55
Abstract

We study radio node (RN) placement for indoor enterprise networks. Using stochastic geometry (SG), we derive the meta-distribution (MD) of the SINR for a test user equipment (UE), with and without cooperation from outdoor macro base stations (MBSs), and compare these results with an integer linear programming (ILP) approach. SG provides an estimate of the required number of RNs but not their locations, while ILP can yield inaccurate local optima and requires high computational power. To address this, we investigate clustering-based algorithms for initializing RN locations using UE location distributions. Along with standard methods, we propose a weighted $k$-harmonic means (WKHM) clustering strategy tailored to maximize SINR. We then introduce a constrained sequential minimum cut algorithm, \texttt{SeqMinCut}, to merge multiple RNs into larger cells and further improve SINR. This is the first work that integrates SG-based statistical analysis, optimization, and clustering to obtain system design insights, dimensioning rules, and planning strategies for enterprise 5G.

0.37

Positioning with Flexible Reflectors: Solution and Performance Analysis

cs.IT ·2026-08-14 ·Jiajun He, Han Yu, Danyan Lin, Gaofeng Pan, Hing Cheung So +2 more
publishedtheory similarity 0.55
Abstract

Flexible reflectors (FRs) have emerged as a low-cost and energy-efficient solution for reshaping electromagnetic propagation environments across a wide range of applications. This paper investigates FR-swarm-assisted target localization in scenarios where line-of-sight (LoS) paths are unavailable. By leveraging the virtual LoS paths created by the FRs, a simple yet accurate estimator is proposed for localization under severe blockage conditions. To characterize the performance limits of the proposed scheme, we derive the Cramer-Rao lower bound (CRLB) and use it to optimize the positions and orientations of the FRs. Furthermore, by accounting for random FR deployment, we characterize the CRLB distribution and reveal how different network configurations affect localization accuracy. Simulation results demonstrate that the developed scheme closely approaches the CRLB performance, while the derived analytical results provide useful guidelines for FR deployment and network design.

0.17

RMSampler: Sparse Radio Map Reconstruction with Active Sampling and Diffusion Posterior Correction

eess.SP ·2026-10-20 ·Nan Cheng, Xiucheng Wang
similarity 0.53
Abstract

Reconstructing a radio map (RM) from sparse received-power measurements supports non-cooperative interference monitoring and spectrum management. However,sparse measurements leave uncertainty about both the global RM and the interfering emitter location, making informative sampling and accurate reconstruction challenging. To address these challenges, a novel joint sampling and reconstruction method named RMSampler is proposed in this paper to improve measurement selection and RM reconstruction under limited measurement budgets. For measurement selection, RMSampler evaluates global RM error reduction using the covariance of diffusion-generated RMs and localization error reduction using candidate emitter locations. Because these errors have different units, their expected relative reductions are combined into a scale-invariant sampling criterion, with each acquired measurement updating both uncertainty estimates. After sampling, the updated emitter-location probabilities guide a separate conditional diffusion ensemble for final reconstruction. To improve measurement agreement, an effective sample size (ESS) target guides robust posterior correction, followed by a minimum-distortion projection enforcing measurement and building constraints. For the reconstruction ensemble, analysis establishes that increasing likelihood power reduces expected robust measurement loss, while pretrained neural parameters and architecture remain unchanged. Experiments using simulated and real-world measured data demonstrate improved reconstruction under matched measurement budgets. In the Chongqing real-world measured data experiment, root mean square error (RMSE) decreases from 3.54 to 2.73~dB relative to random sampling under a common reconstruction method.

0.39

UrbanEMF: City-Scale EMF Mapping over a Continuous Urban Area with Real-World Base-Station Deployment

eess.SP ·2026-10-01 ·Shuangning Li, Chenxin Luo, Shanshan Wang, Yarui Zhang, Paul Lagouanelle +1 more
benchmarkdatasetcode/data similarity 0.53
Abstract

Electromagnetic Fields (EMF) mapping is essential for wireless propagation modeling and are fundamental to a wide range of applications, including spectrum awareness, network planning, and integrated sensing and communication (ISAC). However, existing datasets are often limited to spatially separated 2D scenes without real base station (BS) information. To address this gap, we present UrbanEMF, a city-scale EMF mapping dataset constructed from real world urban geometry and physical BS deployments using ray tracing. Unlike conventional single scene-based datasets, UrbanEMF preserves continuous city-scale urban coverage and realistic transmitter location information. It further extends traditional 2D maps by incorporating multiple receiver heights. In addition, both aggregated received signal strength (RSS) maps and path loss maps are provided to characterize complementary aspects of the radio environment. This work provides a realistic and flexible benchmark for developing and evaluating learning-based methods in large-scale urban wireless environments. The code for this work is available at: https://github.com/lemonstudy/UrbanEMF

0.54