CS Paper Radar

Ray Tracing-Based LoRaWAN Gateway Placement for Reliable Connectivity in Amazonian Regions

Cláudio Modesto, Lucas Mozart, Cleverson Nahum, Bruno Castro, Aldebaro Klautau

cs.NI ·submitted 2026-08-31 14:44 UTC · v1

Abstract

Network planning is an important task in wireless communications, as it helps network operators avoid unnecessary costs. In the context of the internet of things, using long-range wide-area network technologies in the Amazon rainforest, a key challenge is ensuring reliable communication between end-devices and gateways (GWs). In this sense, this reliability is strongly affected by channel conditions. Thus, during the planning phase, choosing the appropriate channel model is an important decision for accurate simulations. Given this motivation, in this work, we propose an optimization model to evaluate the impact of different types of channels on coverage and packet delivery ratio in a forest scenario. We used channels from ray tracing, empirical, and stochastic approaches to assess how decisions made during the network planning phase, in terms of the channel used, affect GW placement and, specifically, the percentage of end-devices covered and the reliability of the communication system. Our results show that GW placement based on site-independent channels can overestimate the number of GWs required to meet the network requirements, whereas using site-specific channels allows us to satisfy the same requirements with fewer GWs.

Comment
5 pages, 2 tables and 5 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Performance Analysis of LoRa and LR-FHSS in 3GPP LEO Satellite and HAPS Channel Scenarios for Remote Area IoT Coverage

eess.SP ·2026-09-07 ·Jean Michel de Souza Sant'Ana, Nurul Huda Mahmood, Vinicius Pozzobon Borin
published similarity 0.65
Abstract · 5 pages, 5 figures, 2 tables, presented at Wireless Europe 2026, Rimini, Italy, June 2026

In this paper, we analyze and compare the performance of LoRa and LR-FHSS in a remote area Internet-of-Things (IoT) connectivity scenario using a low-earth orbit (LEO) satellites and high-altitude platform station (HAPS)-mounted gateway. We conducted a link budget analysis to evaluate communication stability to assess the ability of the technologies to support the different distances and behaviors using a 3GPP channel model for non-terrestrial networks. Several parameters are considered, such as altitude, minimum elevation angle as well as the impact of different types of loss, such as shadow and fast fading, ionosphere scintillation loss, for example. Our findings highlight the performance gap between LR-FHSS and LoRa in terms of both connectivity. We also highlight how lower HAPS altitudes can benefit certain LoRa settings compared to LEO satellites. We show that HAPS can enable the use of lower LoRa spreading factors, which improves scalability and energy efficiency, while LR-FHSS and a higher spreading factor LoRa remain the solution for LEO satellites.

0.36

An Open-Source Hybrid Ray-Tracing and 3GPP Channel Simulator for Non-Terrestrial Network

eess.SY ·2026-10-27 ·Yu-Chien Lin, Cheng-Yi Chang, Yen-Cheng Lai, Ming-Chun Lee, Ta-Sung Lee
code/data similarity 0.63
Abstract

This paper proposes a hybrid channel simulation framework that combines site-specific ray tracing (RT) with 3GPP-compliant statistical channel simulation for non-terrestrial networks (NTNs). The proposed approach uses RT to generate dominant propagation paths and augments them with statistically generated paths and subpaths to provide richer multipath realizations under practical simulation complexity. To provide a complete simulation framework, we integrate Sionna RT, 3GPP, and hybrid RT-3GPP simulators within a unified workflow. Simulation results based on key channel statistics and power delay profiles show that the proposed method preserves site-specific propagation characteristics while providing sufficiently rich multipath components, thereby addressing the complementary limitations of conventional RT-based and purely statistical NTN channel simulators. The developed simulator is also released as an open-source project to support reproducibility and further NTN research.

0.33

Performance Evaluation of HAPS-enabled Coverage Enhancement in Hard-to-Reach Areas

cs.NI ·2026-09-04 ·Hao Lin, Mustafa A. Kishk, Mohamed-Slim Alouini
top venue similarity 0.62
Abstract · 15 pages, 12 figures, published in IEEE Transactions on Wireless Communications

High altitude platform stations (HAPSs) are becoming a key component of future non-terrestrial networks (NTNs). HAPSs can serve a larger area than uncrewed aerial vehicles (UAVs) and offer lower propagation latency, maintenance expense, and energy costs than satellites. A major application of HAPSs is to serve the areas where terrestrial network (TN) deployment is infeasible, especially in hard-to-reach areas and post-disaster areas. For instance, in the Amazon rainforest, the Mediterranean region, and deserts, TN deployment is severely constrained by geographical and environmental conditions. Only areas close to transportation networks or coastlines can be covered, while large areas remain uncovered. Such coverage holes in hard-to-reach areas are typically overlooked in existing literature. Motivated by these realistic cases, in this paper, we use tools from stochastic geometry to mathematically model hard-to-reach areas where cellular terrestrial infrastructure only exists at their perimeter. We propose to deploy a HAPS constellation over this hard-to-reach area to enhance connectivity. For that setup, we derive the downlink (DL) and uplink (UL) coverage performance of the considered user equipment (UE) as a function of the location of the UE inside the coverage hole. Our results show how the number of HAPSs, beamwidth, and HAPS altitude affect the DL and UL coverage probabilities. Finally, we provide multiple useful guidelines for future HAPS deployment.

0.46

A Novel Dynamic Ray-Tracing Channel Model for 6G LEO Satellite-to-Ground Communication Systems

eess.SP ·2026-09-26 ·Songjiang Yang, Cheng-Xiang Wang, Yinghua Wang, Jie Huang, Yuyang Zhou +2 more
top venue similarity 0.59
Abstract

The sixth generation (6G) communication systems envision a space-air-ground integrated network, making accurate satellite-to-ground (S2G) channel modeling crucial for communication systems design. Currently, the majority of S2G channel models rely on stochastic methods, which cannot provide multipath information based on realistic satellite orbits and environments. In this paper, we propose a novel low Earth orbit (LEO) S2G channel model based on dynamic ray-tracing to overcome the challenges of tracking rays for long-distance propagation by setting a virtual transmission plane (VTP). Moreover, since the line-of-sight propagation mechanism contributes the most power to satellite communications, the VTP is constructed based on the first Fresnel zone to generate parallel rays close to the ground. The realistic satellite orbit and environmental information are used in the proposed LEO S2G ray-tracing channel model to compute channel characteristics. The results show that the proposed LEO S2G ray-tracing channel model can accurately generate the channel characteristics based on the satellite orbits. The channel characteristics of LEO S2G communications computed by the proposed ray-tracing method can well match the channel measurements.

0.56

Joint Air Corridor and BS Coverage Planning for Large-Scale High-Density Low-Altitude Aerial Networks via Channel Knowledge Maps

eess.SP ·2026-11-10 ·Jiaxuan Li, Yilong Chen, Yuan Guo, Fan Liu, Jie Xu
similarity 0.57
Abstract

This paper studies the joint air corridor and base station (BS) coverage planning problem for high-density low-altitude aerial networks supported by terrestrial cellular infrastructures. In the considered system, unmanned aerial vehicles (UAVs) operate within a structured air corridor planned over a grid-based airspace, and each BS serves selected corridor grid cells by sharing its communication resources among all UAVs therein. Each BS's traffic load depends on both the number of covered corridor cells and the UAV density, thereby affecting the communication rate available to each UAV. We exploit the channel knowledge map (CKM) to characterize the channel gains between BSs and candidate airspace cells and evaluate desired signals and inter-cell interference for environment-aware offline planning. Based on CKM, we jointly optimize the corridor layout and BS coverage to minimize a weighted objective balancing corridor length and the supportable average UAV density along the entire corridor, subject to minimum communication rate requirements for all UAVs along the air corridor. The joint design is formulated as a mixed-integer linear program (MILP), which can be optimally solved using off-the-shelf solvers. For large maps, we develop a scalable suboptimal algorithm based on Lagrangian relaxation and A* search. Specifically, we incorporate BS resource constraints into A* corridor search via Lagrangian relaxation, and then jointly optimize BS coverage and UAV density along the generated corridors under the original rate constraints. Numerical results demonstrate the benefits of the proposed joint design in supporting high-density UAV operations and show that the proposed algorithm obtains high-quality solutions with substantially reduced computation time.

0.12

Beyond TR 38.811 for 6G NTN Channel Models

eess.SP ·2026-11-02 ·Kuan-Po Chiu, Aaron Jacob Buck, Sumit Roy
similarity 0.57
Abstract

As the 3rd Generation Partnership Project (3GPP) expands 6G non-terrestrial network (NTN) to S, Ku, and Ka bands for integration with existing terrestrial cellular networks, the necessary satellite channel model for link and network performance evaluation remains tied to TR 38.811, last revised in 2020. We identify issues on multiple fronts: inappropriate parameter specifications based on very limited site-specific environments considered, omission of satellite-induced Doppler spread and directional antenna effects and lack of a transparent channel model generation procedure. To address these limitations, we re-derive the channel parameters using ray tracing (RT) over urban and rural environments based on ITU-R building statistics. Our results show that TR 38.811 substantially overestimates the K-factor at low elevations and predicts a decreasing trend with elevation, which is inconsistent with RT. The Ka-band clutter loss (CL) also exceeds the RT estimates by more than 15 dB in urban cases. It also underestimates rural delay spread (DS) at low elevations and predicts an elevation trend inconsistent with RT. We further quantify the previously neglected satellite-induced Doppler spread. Finally, we demonstrate that the conventional TR 38.811 channel generator significantly underestimates the K-factor in the presence of directional antenna (beamforming), while our modified generator substantially reduces this discrepancy.

0.30

Optimal Measurement Point Selection for Radio Environment Maps: A Two-Stage Approach

eess.SP ·2026-08-11 ·Bastian Perner, Friedemann Laue, Maximilian Lubke, Norman Franchi
published similarity 0.57
Abstract · accepted at IEEE PIMRC 2026

Electromagnetic (EM) situational awareness is essential for the deployment and operation of local and temporary non-public networks (NPNs). Radio Environment Maps (REMs) provide an effective basis for network planning and operation by capturing the prevailing EM conditions. However, efficient measurement location selection for REM construction remains a key challenge, particularly under strict time and cost constraints. This paper presents a two-stage measurement selection framework that employs Optimal Experimental Design (OED)-based strategies to generate a reduced candidate set during a pre-selection phase. In a subsequent optimization stage, combinatorial optimization is applied to select an improved subset of measurement locations by minimizing the Mean Absolute Error (MAE) of the resulting REM, using a scenario-specific propagation simulation model. The results demonstrate that the proposed framework reduces the number of required measurement locations while consistently improving REM construction accuracy across all evaluated strategies. Validation using real-world measurement data confirms the practical applicability of the approach, with the optimization stage achieving MAE reductions from about 4% to around 50%, independent of the chosen pre-selection strategy.

0.23

Site-Specific Cell Shaping: An Agentic Framework

eess.SY ·2026-11-14 ·Zhuo Xu, Zhaolin Wang, Yuanwei Liu
benchmark similarity 0.55
Abstract

An agentic framework is proposed for cell shaping in future sixth-generation (6G) wireless network planning. Cell shaping controls the coverage and interferences of base stations (BSs) through antenna parameters configuration, providing an important means of improving coverage. In contrast to conventional approaches that reply on costly performance evaluations, the proposed framework achieves intelligent and efficient antenna configuration through a perception-reasoning-reflection loop. Specifically, a Configuration Agent combines scene information, evaluation history, and reflection feedback to generate antenna configuration proposals. Then, a ray tracing(RT)-based evaluator assesses these proposals and returns a structured performance summary. Next, a Reflection Agent interprets these results to diagnose site-specific performance deficiencies, recommend feasible configuration adjustments, and accumulate conditional experience. Through this iterative process, the framework accumulates site-specific experience and progressively refines antenna configurations without human-in-the-loop intervention. Simulations in real-world urban scenarios demonstrate that the proposed framework achieves lower outage probabilities than the considered benchmark methods, highlighting the effectiveness of agentic reasoning and reflection in translating site-specific performance feedback and accumulated experience into adaptive antenna configuration decisions.

0.16