CS Paper Radar

A Novel Dynamic Ray-Tracing Channel Model for 6G LEO Satellite-to-Ground Communication Systems

Songjiang Yang, Cheng-Xiang Wang, Yinghua Wang, Jie Huang, Yuyang Zhou, Wei Feng, el-Hadi M. Aggoune

eess.SP ·submitted 2026-09-26 13:42 UTC · v1
top venue

Abstract

The sixth generation (6G) communication systems envision a space-air-ground integrated network, making accurate satellite-to-ground (S2G) channel modeling crucial for communication systems design. Currently, the majority of S2G channel models rely on stochastic methods, which cannot provide multipath information based on realistic satellite orbits and environments. In this paper, we propose a novel low Earth orbit (LEO) S2G channel model based on dynamic ray-tracing to overcome the challenges of tracking rays for long-distance propagation by setting a virtual transmission plane (VTP). Moreover, since the line-of-sight propagation mechanism contributes the most power to satellite communications, the VTP is constructed based on the first Fresnel zone to generate parallel rays close to the ground. The realistic satellite orbit and environmental information are used in the proposed LEO S2G ray-tracing channel model to compute channel characteristics. The results show that the proposed LEO S2G ray-tracing channel model can accurately generate the channel characteristics based on the satellite orbits. The channel characteristics of LEO S2G communications computed by the proposed ray-tracing method can well match the channel measurements.

Closest papers

Nearest neighbours by meaning across the whole index.

Joint Delay--Doppler Modeling of Multipath LEO Channels

eess.SP ·2026-11-02 ·Kuan-Po Chiu, Sumit Roy
hot direction similarity 0.66
Abstract

Multipath channel models for Low-Earth-orbit (LEO) non-terrestrial network (NTN) must contend with time variability due to rapid satellite orbital motion that in turn impacts local (near terrestrial) scattering near the ground terminal (GT) receiver. While 3GPP-defined NTN channel model pipelines TR 38.811, 38.901 incorporate elevation-dependence into statistical channel generators, these are inherited largely from 2-D terrestrial propagation and are largely insufficient. Further, they do not prescribe any integrated workflow that is broadly available for generating joint delay, Doppler/phase and component multipath power profiles as a function of satellite location over a pass. This work addresses this gap by developing a geometry-based stochastic channel model driven by prescribed slant range, elevation, and azimuth over a LEO pass. A ground scene generates wall-reflected, ground-reflected, and roof-edge-diffracted components, from which joint delay-Doppler statistics and temporal channel impulse response (CIR) evolution are obtained. The resulting locally wide-sense stationary tapped-delay-line CIR enables analysis of key statistics such as the $K$-factor of the taps, multipath delay and Doppler spreads as a function of elevation and scene parameters. Depending on the scenarios (urban and rural), our model-based results show that with omnidirectional antennas, the LoS probability, delay-spread and $K$-factor trends broadly match 3GPP NTN models in TR 38.811 as a function of elevation. Beamforming instead produces a mid-elevation $K$-factor peak, which is not predicted by TR 38.811 and 6G NTN. Doppler spreads are smaller than those from our previous model and QuaDriGa because the proposed model accounts for path existence. Stationarity durations for CIR are reported and generally decrease with elevation, but with local increases at mid-elevation due to path geometry effects.

0.56

Site-specific Channel Modeling Based on Remote-Sensing Maps for 6G Space--Air--Ground Digital Twins

eess.SP ·2026-08-31 ·Peijie Liu, Pan Tang, Jianhua Zhang, Lei Tian, Bin Ao +2 more
similarity 0.64
Abstract · 17 pages, 23 figures, 4 tables

Site-specific channel models are essential for wireless digital twins of 6G space--air--ground communication systems. However, 3D maps are difficult to obtain over wide areas, which limits large-area site-specific channel modeling. To address this issue, this paper proposes a remote-sensing-based augmented ray-tracing channel modeling framework. The framework comprises a deterministic RT branch, a measurement-statistical branch, and an RT augmentation branch. To overcome the difficulty of acquiring large-area 3D maps, the deterministic RT branch reconstructs a 3D RT scene from satellite remote-sensing imagery and calibrates its electromagnetic material parameters using measured path loss. To provide the statistical parameters required for RT augmentation, the measurement-statistical branch establishes the marginal distributions and interparameter dependence models of the channel parameters. Specifically, a wideband UAV channel measurement campaign is conducted at 4.60 GHz, and a proposed multipath estimation method estimates the complex amplitudes, delays, and Doppler shifts of the measured multipath. To bridge the gap between RT predictions and measurements, the RT augmentation branch organizes the RT multipath into LoS, LoS-tail, and NLoS components, generates additional short-delay LoS-tail paths, and reallocates the component and path powers according to the measurement-derived statistics while preserving the total RT received power. The validation results show that the proposed framework reduces the path loss RMSE from 5.45 to 4.35 dB and, relative to calibrated RT, decreases the RMS delay spread and normalized Doppler spread RMSEs by 53.03 and 26.48, respectively. The proposed framework provides a site-specific channel modeling approach for 6G space--air--ground digital-twin studies.

0.26

An Open-Source Hybrid Ray-Tracing and 3GPP Channel Simulator for Non-Terrestrial Network

eess.SY ·2026-10-27 ·Yu-Chien Lin, Cheng-Yi Chang, Yen-Cheng Lai, Ming-Chun Lee, Ta-Sung Lee
code/data similarity 0.62
Abstract

This paper proposes a hybrid channel simulation framework that combines site-specific ray tracing (RT) with 3GPP-compliant statistical channel simulation for non-terrestrial networks (NTNs). The proposed approach uses RT to generate dominant propagation paths and augments them with statistically generated paths and subpaths to provide richer multipath realizations under practical simulation complexity. To provide a complete simulation framework, we integrate Sionna RT, 3GPP, and hybrid RT-3GPP simulators within a unified workflow. Simulation results based on key channel statistics and power delay profiles show that the proposed method preserves site-specific propagation characteristics while providing sufficiently rich multipath components, thereby addressing the complementary limitations of conventional RT-based and purely statistical NTN channel simulators. The developed simulator is also released as an open-source project to support reproducibility and further NTN research.

0.33

Broadband LEO Satellite Constellations for Next-Generation Navigation: Potentials, Enabling Technologies, and Challenges

eess.SP ·2026-10-02 ·Zhendong Li, Mingze Zhu, Jiahao Liu, Zhou Su, Dong Fu +2 more
survey similarity 0.61
Abstract

The rapid deployment of broadband low Earth orbit (LEO) constellations provides new opportunities for next-generation navigation. Compared with conventional global navigation satellite systems (GNSS), broadband LEO systems provide stronger received signals, wider bandwidths, rapidly varying satellite geometry, and larger constellation scales, offering new capabilities for positioning, navigation, and timing (PNT). Meanwhile, their communication-oriented waveforms, high dynamics, and resource-constrained architectures introduce new challenges that are fundamentally different from those in GNSS. This article provides a comprehensive overview of broadband LEO constellations for next-generation navigation, covering their fundamental characteristics, representative use cases, key enabling technologies, and open challenges. We first compare broadband LEO systems with conventional GNSS and summarize the main technical routes for LEO-based PNT. We then discussed the emerging use cases in GNSS-challenged, multipath-dominant, and integrated communication and navigation (ICAN) scenarios. Key enabling technologies including waveform design, high-dynamic signal processing, and constellation resource scheduling are further reviewed. As a representative case study, the navigation-oriented optimization of the Starlink primary synchronization sequence demonstrates that subcarrier power allocation can improve multipath resistance while maintaining ranging accuracy. Finally, several challenges and future directions of broadband LEO-based navigation are discussed, aiming to provide reference for future researches.

0.18

Analytical Channel Modeling and Stability Aware Optimization of Optical Inter Satellite Links

cs.IT physics.optics ·2026-09-15 ·Hossein Safi, Ziheng Wang, Stijn Mast, Harald Haas, Iman Tavakkolnia
top venue similarity 0.61
Abstract

Optical inter-satellite links (OISLs) are key enablers for high-capacity space networks and next-generation satellite constellations. However, their extreme directionality makes link reliability highly sensitive to platform-induced pointing jitter, which causes random misalignment between the transmitter and receiver beams. In this paper, we develop a tractable closed-form statistical channel model for point-to-point OISLs subject to independent pointing errors at both terminals. Accurate Gaussian main-lobe approximations are applied to the transmitter far-field pattern and receiver coupling efficiency. This transforms the diffraction-based channel response into closed-form expressions for the channel-gain distribution, outage probability, and ergodic capacity. The analytical results are validated through Monte Carlo simulations and used to study the impact of terminal stability, beam divergence, and link margin on OISL performance. The results show that outage probability is governed by the weaker terminal in terms of pointing stability, while improving only the stronger terminal provides minimal additional benefit. In contrast, the ergodic-capacity penalty depends on the combined stability of both terminals, revealing a fundamental distinction between reliability and throughput metrics. The proposed framework provides practical design guidelines for selecting beam parameters and specifying pointing and tracking requirements under varying levels of platform instability.

0.30

Satellite Infrastructure Sharing: Orbit-Structured Stochastic Geometry Modeling and Connectivity Analysis in Heterogeneous Satellite Networks

cs.IT eess.SPmath.PR ·2026-08-12 ·Chang-Sik Choi
top venue similarity 0.59
Abstract · submitted to IEEE Transactions on Wireless Communications

This paper develops an analytical framework to evaluate the feasibility and performance of satellite infrastructure sharing among multiple low Earth orbit (LEO) satellite operators. Motivated by the growing demand for universal connectivity under limited satellite resources, the proposed model captures uncoordinated deployments where independently operated constellations coexist without predefined orbital agreements. To describe such heterogeneous configurations, the spherical Cox point process is employed to jointly generate orbital structures and satellites. Then, each satellite is further assigned a random communication range, reflecting variations in coverage capability across operators. The overall coverage region is modeled through a spherical Cox-Boolean model that captures the spatial overlap of individual satellite spherical footprints on Earth. Using the proposed framework, the feasibility and benefits of satellite infrastructure sharing are mathematically analyzed, and closed-form expressions are derived for key performance metrics such as the connection probability, connection number, and downlink signal characteristics including the nearest serving distance, total received signal power, and the signal-to-interference ratio (SIR) distribution in the interference-limited regime. The analytical results, validated through system-level simulations, provide a tractable characterization of how orbital geometry governs coverage, connectivity, and interference, and reveal the inherent trade-offs induced by coverage overlap in heterogeneous satellite constellations.

0.29

Beyond TR 38.811 for 6G NTN Channel Models

eess.SP ·2026-11-02 ·Kuan-Po Chiu, Aaron Jacob Buck, Sumit Roy
similarity 0.59
Abstract

As the 3rd Generation Partnership Project (3GPP) expands 6G non-terrestrial network (NTN) to S, Ku, and Ka bands for integration with existing terrestrial cellular networks, the necessary satellite channel model for link and network performance evaluation remains tied to TR 38.811, last revised in 2020. We identify issues on multiple fronts: inappropriate parameter specifications based on very limited site-specific environments considered, omission of satellite-induced Doppler spread and directional antenna effects and lack of a transparent channel model generation procedure. To address these limitations, we re-derive the channel parameters using ray tracing (RT) over urban and rural environments based on ITU-R building statistics. Our results show that TR 38.811 substantially overestimates the K-factor at low elevations and predicts a decreasing trend with elevation, which is inconsistent with RT. The Ka-band clutter loss (CL) also exceeds the RT estimates by more than 15 dB in urban cases. It also underestimates rural delay spread (DS) at low elevations and predicts an elevation trend inconsistent with RT. We further quantify the previously neglected satellite-induced Doppler spread. Finally, we demonstrate that the conventional TR 38.811 channel generator significantly underestimates the K-factor in the presence of directional antenna (beamforming), while our modified generator substantially reduces this discrepancy.

0.30

Ray Tracing-Based LoRaWAN Gateway Placement for Reliable Connectivity in Amazonian Regions

cs.NI ·2026-08-31 ·Cláudio Modesto, Lucas Mozart, Cleverson Nahum, Bruno Castro, Aldebaro Klautau
similarity 0.59
Abstract · 5 pages, 2 tables and 5 figures

Network planning is an important task in wireless communications, as it helps network operators avoid unnecessary costs. In the context of the internet of things, using long-range wide-area network technologies in the Amazon rainforest, a key challenge is ensuring reliable communication between end-devices and gateways (GWs). In this sense, this reliability is strongly affected by channel conditions. Thus, during the planning phase, choosing the appropriate channel model is an important decision for accurate simulations. Given this motivation, in this work, we propose an optimization model to evaluate the impact of different types of channels on coverage and packet delivery ratio in a forest scenario. We used channels from ray tracing, empirical, and stochastic approaches to assess how decisions made during the network planning phase, in terms of the channel used, affect GW placement and, specifically, the percentage of end-devices covered and the reliability of the communication system. Our results show that GW placement based on site-independent channels can overestimate the number of GWs required to meet the network requirements, whereas using site-specific channels allows us to satisfy the same requirements with fewer GWs.

0.36