CS Paper Radar

RMSampler: Sparse Radio Map Reconstruction with Active Sampling and Diffusion Posterior Correction

Nan Cheng, Xiucheng Wang

eess.SP ·submitted 2026-10-20 01:31 UTC · v1

Abstract

Reconstructing a radio map (RM) from sparse received-power measurements supports non-cooperative interference monitoring and spectrum management. However,sparse measurements leave uncertainty about both the global RM and the interfering emitter location, making informative sampling and accurate reconstruction challenging. To address these challenges, a novel joint sampling and reconstruction method named RMSampler is proposed in this paper to improve measurement selection and RM reconstruction under limited measurement budgets. For measurement selection, RMSampler evaluates global RM error reduction using the covariance of diffusion-generated RMs and localization error reduction using candidate emitter locations. Because these errors have different units, their expected relative reductions are combined into a scale-invariant sampling criterion, with each acquired measurement updating both uncertainty estimates. After sampling, the updated emitter-location probabilities guide a separate conditional diffusion ensemble for final reconstruction. To improve measurement agreement, an effective sample size (ESS) target guides robust posterior correction, followed by a minimum-distortion projection enforcing measurement and building constraints. For the reconstruction ensemble, analysis establishes that increasing likelihood power reduces expected robust measurement loss, while pretrained neural parameters and architecture remain unchanged. Experiments using simulated and real-world measured data demonstrate improved reconstruction under matched measurement budgets. In the Chongqing real-world measured data experiment, root mean square error (RMSE) decreases from 3.54 to 2.73~dB relative to random sampling under a common reconstruction method.

Closest papers

Nearest neighbours by meaning across the whole index.

DyRadio: Spatiotemporal Diffusion for Dynamic Radio Map Reconstruction

cs.LG cs.AI ·2026-11-01 ·Zhijie Fan, Zhifeng Zhao, Rongpeng Li
similarity 0.70
Abstract · 13 pages, 7 figures, 8 tables

Accurate radio map (RM) reconstruction is essential for environment-aware wireless networks. Sampling-based methods, which infer radio conditions from sparse measurements, are widely adopted because they do not require explicit knowledge of transmitter configurations. However, in dynamic environments, time-varying propagation conditions cause RMs to evolve, complicating reconstruction from temporally distributed sparse observations. Although cross-frame observations provide complementary spatial information, their direct aggregation can introduce temporal state mismatch. Furthermore, unknown measurement noise adds to the reconstruction difficulties. To address these challenges, we propose DyRadio, a framework that integrates spatiotemporal RM reconstruction with unknown noise estimation. Specifically, a propagation-prior-guided, noise-conditioned spatiotemporal diffusion model (DM) jointly reconstructs consecutive RMs by capturing cross-frame dependencies, while adapting to measurement noise levels. To estimate the noise level, an iterative predictive likelihood method alternates between DM-based blind-area prediction and noise-level updates. The estimated noise level then conditions reconstruction of the complete RM sequence. Experimental results demonstrate superior reconstruction accuracy and robustness against measurement noise, with peak signal-to-noise ratio (PSNR) improvements of 1.18-5.75 dB over the best-performing baseline across all evaluated settings.

0.21

Completing Radio Map Tensors via Factor Diffusion Posterior Sampling

eess.SP ·2026-10-11 ·Le Xu, Rajesh Shrestha, Xiao Fu
similarity 0.65
Abstract · 19 pages (14 pages of main text and 5 pages of appendix)

Radio map estimation (RME), also known as spectrum cartography, aims to recover radio signal strength across multiple domains (e.g., spatial and spectral domains) from sparse measurements, naturally leading to a tensor completion problem. Recent advances show that deep learning-based generative models can provide data-driven structural constraints for RME, yielding substantial performance improvements over traditional model-based approaches. Diffusion models (DMs) represent the current state of the art in generative modeling and hold strong promise for advancing RME. However, existing diffusion-based RME methods often require extensive training data, necessitate retraining when scenarios or measurement formats change, and lack recoverability guarantees. This paper proposes a latent factor diffusion framework for spatio-spectral radio map tensor completion. By training two independent DMs on single-emitter's spatial loss field and spectral signature and embedding them into the factors of the radio map tensor, the proposed approach enables diffusion posterior sampling-based recovery with reduced training complexity as well as enhanced measurement format/sensing pattern flexibility. Recoverability and sample complexity guarantees under the proposed approach are also established. Numerical experiments validate the effectiveness of the proposed method, showing strong generalization across city environments unseen in training data.

0.21

Classification-oriented adaptive sensing via posterior sampling

eess.SP cs.CV ·2026-09-18 ·Andriy Enttsel, Maxime Rousselot, Vincent Corlay
similarity 0.59
Abstract

Recent advances in diffusion models have enabled high-performance, instance-adaptive compressed sensing through posterior sampling, without task-specific policy training. Existing methods select sensing probes by maximizing total posterior signal variance and are therefore primarily reconstruction-driven. We introduce a classification-driven extension motivated by the closed-form posterior covariance of a class-conditional Gaussian mixture model, which decomposes into within-class and between-class uncertainty. Using calibrated soft classifier outputs, we estimate these uncertainty terms from diffusion posterior samples and propose a classification-oriented criterion for selecting the dominant sensing direction in the unmeasured subspace. Experiments on MNIST and CIFAR-10 compare the resulting classification accuracy, measurement cost, and reconstruction quality with those of reconstruction-oriented counterparts. The results identify regimes in which semantic posterior uncertainty yields a more favorable classification--measurement trade-off and quantify the associated reconstruction cost.

0.47

Identifiability and Joint Recovery of a Structured Signal Ensemble From Sub-Nyquist Samples

eess.SP ·2026-09-25 ·Kumari Priyanka, Satish Mulleti
similarity 0.58
Abstract · 5 pages, 2 figures

Efficient acquisition of correlated continuous-time signals is critical in applications such as distributed sensor networks and array processing. However, existing correlation models often fail to capture the shared structure of physical signals measured in close proximity. In this paper, we model each signal in an ensemble as the sum of a hidden common lowpass component and a signal-specific innovation highpass component with disjoint spectral supports, where the common bandwidth is unknown. We first derive theoretical identifiability conditions guaranteeing unique decomposition and reconstruction from subsampled observations. Further, we propose a practical recovery algorithm and a joint reconstruction framework that leverages parametric structured dictionaries parameterized by the unknown common bandwidth. Numerical experiments on an ensemble of four signals demonstrate exact reconstruction with a 25% aggregate sampling rate reduction under identifiability conditions, and robust recovery with up to a 74% rate reduction when all channels are sampled below the Nyquist rate, significantly reducing data acquisition and hardware overhead.

0.24

Radiomap Blind Prediction under Incomplete Observation: Error Characterization and Correctable Propagation-Prior Learning

eess.SP cs.AIcs.LG ·2026-09-26 ·Xiaojie Li, Yu Han, Han Fang, Shangqing Liu, Guangxu Zhu +2 more
similarity 0.57
Abstract · This work has been submitted to the IEEE for possible publication

Radiomap blind prediction aims to infer radiomaps from observable representations of the propagation environment and base station configuration without field measurements. In practice, the observable representations are inherently incomplete. Thus, the target radiomap is not fully determined by the inputs when generalizing to unseen configurations or environments. Under incomplete observation, we establish a population-level theory of deterministic radiomap blind prediction that identifies the conditional mean as its optimal target and separates prediction error into reducible predictor approximation and irreducible uncertainty caused by missing physical information. The framework further characterizes the train-test risk gap and the uncertainty reduction enabled by observation enrichment. Building on it, we reveal the dual role of propagation priors: they provide physically grounded guidance, yet their implementable forms may bias the attainable predictor. This motivates RadioDecomp, which treats a prior-guided predictor as a correctable base and learns its remaining predictable discrepancy through residual refinement. To evaluate RadioDecomp across distinct propagation-prior designs, we instantiate it with a feature-guided monolithic base and a LoS-Shadow structured base, yielding RadioFR and RadioLSR, respectively. Across random, cross-configuration, and cross-environment settings, experiments confirm the benefit of propagation-related representations and show that both instantiations improve upon their respective bases. Further controlled studies on base capacity, training-support coverage, and observation coarsening corroborate the proposed analysis.

0.12

Channel Knowledge Map Enabled Low-Complexity Dynamic Radio Environment Reconstruction

eess.SP ·2026-08-18 ·Yujun Lin, Zhiqiang Xiao, Hao Wu, Xiaoqiang Qiao, Fayu Wan +1 more
similarity 0.56
Abstract

Accurate and timely radio environment reconstruction is important but challenging under particularly dynamic transmitter configurations. The conventional methods such as compressed sensing (CS), Kriging method or U-Net typically require environment measurements and reconstruction overhead for radio environment updating as the transmitter locations or radiation patterns change. In this paper, we propose a novel channel knowledge map (CKM)-enabled dynamic radio environment reconstruction method for efficient radio map updating. Specifically, the recently proposed CKM can store reusable path-level propagation knowledge that is decoupled from the transmitter-side radiation characteristics. We can leverage CKM for lightweight forward radio map generation as the transmitter locations and radiation patterns are known, without requiring new target-map measurements. Simulation results show that the proposed method outperforms CS, Kriging, and U-Net in reconstruction accuracy and exhibits strong robustness performance under dynamic transmitter configurations, which demonstrates the potential of the proposed method for flexible and efficient radio environment reconstruction in dynamic wireless networks.

0.35

ARIA: An AI-Powered Radio-Channel Inference and Analysis Pipeline

cs.IT eess.SP ·2026-11-09 ·Homa Nikbakht, Mingjun Ying, Dipankar Shakya, Daniel Abraham, Theodore S. Rappaport
similarity 0.56
Abstract · This work has been submitted to the IEEE for possible publication

Statistical channel models play a key role in the design and standardization of next-generation wireless systems. The models substitute for costly and time-consuming field measurements when fitted distributions accurately reproduce the measured channel impulse responses. Future wireless systems will operate in global spectrum allocations from 1 to 150 GHz. Over the full span, analytically chosen distribution families fitted to scarce measurement data fail to deliver the required accuracy. Generative AI models instead learn each distribution from the radio-propagation data itself, adapt to the measured structure at every frequency, and scale across the entire band. We present ARIA, an AI-powered Radio-channel Inference and Analysis pipeline that learns each channel-parameter distribution from the measurements. The pipeline extracts power-delay profiles and recovers the channel parameters with time-cluster spatial-lobe (TCSL) analysis. Three neural density estimators, namely mixture density networks, neural spline flows (NSF), and denoising diffusion implicit models, learn each parameter's distribution. A composite rank across goodness-of-fit metrics with Friedman-Nemenyi testing identifies the best estimator, and a maximum-likelihood step anchored to the measured samples converts its density into closed-form parametric families. We instantiate ARIA on the NYU WIRELESS 16.95 GHz InH campaign and find that NSF outperforms the other estimators on every metric. We also show that a conditional NSF with feature-wise linear modulation, trained jointly on the 6.75 and 16.95 GHz measurements, improves over single-frequency training. We feed the fitted distributions into the NYUSIM simulator and reproduce the measured omnidirectional RMS delay spread medians within 2 ns, the per-lobe azimuth and zenith spread medians within 1 degree, and the omnidirectional zenith spread medians within 0.5 degrees.

0.24

From Sparse Probes to Sum-Rate Maximization: Electromagnetic Twin Beamforming

eess.SP ·2026-08-21 ·Tuo Wu, Kangda Zhi, Jie Tang, Jianchao Zheng, Naofal Al-Dhahir +1 more
similarity 0.55
Abstract

Probing every candidate location at each wireless-map update is costly. This letter develops electromagnetic-twin (ET) beamforming that converts sparse spatial probes into a sum-rate decision. The ET stores a location-dependent angular power spectrum, updates its innovation through graph-regularized estimation, and queries user covariances for projected beam optimization. A rate-sensitivity bound selects subsequent probes by query-weighted posterior-variance reduction. With 1\% random probes, ET beamforming achieves $2.69$ bit/s/Hz versus $1.12$ for a static channel knowledge map; with 7\% query-aware probes, it reaches $3.03$ bit/s/Hz, within 3.4\% of perfect-covariance beamforming.

0.45