CS Paper Radar

DyRadio: Spatiotemporal Diffusion for Dynamic Radio Map Reconstruction

Zhijie Fan, Zhifeng Zhao, Rongpeng Li

cs.LG cs.AI ·submitted 2026-11-01 05:39 UTC · v1

Abstract

Accurate radio map (RM) reconstruction is essential for environment-aware wireless networks. Sampling-based methods, which infer radio conditions from sparse measurements, are widely adopted because they do not require explicit knowledge of transmitter configurations. However, in dynamic environments, time-varying propagation conditions cause RMs to evolve, complicating reconstruction from temporally distributed sparse observations. Although cross-frame observations provide complementary spatial information, their direct aggregation can introduce temporal state mismatch. Furthermore, unknown measurement noise adds to the reconstruction difficulties. To address these challenges, we propose DyRadio, a framework that integrates spatiotemporal RM reconstruction with unknown noise estimation. Specifically, a propagation-prior-guided, noise-conditioned spatiotemporal diffusion model (DM) jointly reconstructs consecutive RMs by capturing cross-frame dependencies, while adapting to measurement noise levels. To estimate the noise level, an iterative predictive likelihood method alternates between DM-based blind-area prediction and noise-level updates. The estimated noise level then conditions reconstruction of the complete RM sequence. Experimental results demonstrate superior reconstruction accuracy and robustness against measurement noise, with peak signal-to-noise ratio (PSNR) improvements of 1.18-5.75 dB over the best-performing baseline across all evaluated settings.

Comment
13 pages, 7 figures, 8 tables

Closest papers

Nearest neighbours by meaning across the whole index.

RMSampler: Sparse Radio Map Reconstruction with Active Sampling and Diffusion Posterior Correction

eess.SP ·2026-10-20 ·Nan Cheng, Xiucheng Wang
similarity 0.70
Abstract

Reconstructing a radio map (RM) from sparse received-power measurements supports non-cooperative interference monitoring and spectrum management. However,sparse measurements leave uncertainty about both the global RM and the interfering emitter location, making informative sampling and accurate reconstruction challenging. To address these challenges, a novel joint sampling and reconstruction method named RMSampler is proposed in this paper to improve measurement selection and RM reconstruction under limited measurement budgets. For measurement selection, RMSampler evaluates global RM error reduction using the covariance of diffusion-generated RMs and localization error reduction using candidate emitter locations. Because these errors have different units, their expected relative reductions are combined into a scale-invariant sampling criterion, with each acquired measurement updating both uncertainty estimates. After sampling, the updated emitter-location probabilities guide a separate conditional diffusion ensemble for final reconstruction. To improve measurement agreement, an effective sample size (ESS) target guides robust posterior correction, followed by a minimum-distortion projection enforcing measurement and building constraints. For the reconstruction ensemble, analysis establishes that increasing likelihood power reduces expected robust measurement loss, while pretrained neural parameters and architecture remain unchanged. Experiments using simulated and real-world measured data demonstrate improved reconstruction under matched measurement budgets. In the Chongqing real-world measured data experiment, root mean square error (RMSE) decreases from 3.54 to 2.73~dB relative to random sampling under a common reconstruction method.

0.39

Completing Radio Map Tensors via Factor Diffusion Posterior Sampling

eess.SP ·2026-10-11 ·Le Xu, Rajesh Shrestha, Xiao Fu
similarity 0.68
Abstract · 19 pages (14 pages of main text and 5 pages of appendix)

Radio map estimation (RME), also known as spectrum cartography, aims to recover radio signal strength across multiple domains (e.g., spatial and spectral domains) from sparse measurements, naturally leading to a tensor completion problem. Recent advances show that deep learning-based generative models can provide data-driven structural constraints for RME, yielding substantial performance improvements over traditional model-based approaches. Diffusion models (DMs) represent the current state of the art in generative modeling and hold strong promise for advancing RME. However, existing diffusion-based RME methods often require extensive training data, necessitate retraining when scenarios or measurement formats change, and lack recoverability guarantees. This paper proposes a latent factor diffusion framework for spatio-spectral radio map tensor completion. By training two independent DMs on single-emitter's spatial loss field and spectral signature and embedding them into the factors of the radio map tensor, the proposed approach enables diffusion posterior sampling-based recovery with reduced training complexity as well as enhanced measurement format/sensing pattern flexibility. Recoverability and sample complexity guarantees under the proposed approach are also established. Numerical experiments validate the effectiveness of the proposed method, showing strong generalization across city environments unseen in training data.

0.21

DyTransRM: A Unified Simulation-to-Real Framework for Dynamic Radio Map Prediction

eess.SP ·2026-11-14 ·Simin Wang, Jiayi Wei, Jihong Li, Guhan Zheng, Rui Cheng +1 more
similarity 0.63
Abstract · 14 pages, 5 figures

Dynamic radio map (RM) prediction enables proactive wireless network control by forecasting future propagation conditions from historical observations. However, collecting temporally continuous and spatially dense real-world RMs is prohibitively expensive, while models trained on large-scale simulated data often suffer from limited transferability to real environments. To address this issue, we propose DyTransRM, a unified simulation-to-real framework for dynamic RM prediction under sparse real-world measurements. DyTransRM first introduces RadioCLIP to learn physics-semantic representations by aligning environmental evolution with the corresponding propagation evolution, thereby improving both prediction accuracy and cross-domain transferability. To further bridge the simulation-to-real gap, SparseUOT employs sparse-mask simulation refinement to mimic realistic measurement patterns and unbalanced optimal transport to selectively align compatible propagation representations across domains. Experiments on RadioMapMotion and real-world datasets demonstrate that RadioCLIP achieves an NMSE of 0.0018 and an RMSE of 0.012 in simulation-domain prediction. After sparse real-domain adaptation, DyTransRM achieves an NMSE of 0.023, RMSE of 0.079, and MAE of 0.064, outperforming representative adaptation baselines without requiring spatially complete real RMs. These results demonstrate the effectiveness of DyTransRM for transferring simulation-learned dynamic propagation knowledge to practical sparse-measurement scenarios.

0.28

ST-CGMDiff: Sparse-Conditioned Cross-Frequency Spatio-Temporal Latent Diffusion for Dynamic 3D Channel Gain Map Reconstruction

eess.SP ·2026-11-04 ·Tianxiang Li, Yilong Chen, Han Hu, Yong Zeng, Jie Xu
similarity 0.62
Abstract

Accurate and efficient reconstruction of channel gain maps (CGMs) is essential for environment-aware wireless communications. Unlike prior works that focus on static CGMs at a single frequency band, this paper studies the construction of dynamic three-dimensional (3D) CGMs across multiple frequency bands over consecutive time slots, using limited channel measurements. Specifically, for a given transmitter (Tx) location, we represent the CGM at any given receiver (Rx) height as a two-dimensional (2D) grayscale image, where each pixel indicates the average channel gain over the corresponding Rx spatial grid cell. Accordingly, we propose ST-CGMDiff, a spatio-temporal latent diffusion framework that integrates sparse-observation conditioning and cross-frequency modeling to reconstruct dynamic 3D CGMs across multiple carrier frequencies and varying Rx heights within a unified model. In this framework, we jointly encode the input parameters, including the current sparse observations, observation masks, physical Tx and Rx z-coordinates, and carrier frequencies as spatial conditions. A frequency-conditioned convolutional gated recurrent unit (ConvGRU) then extracts causal information from previously constructed CGMs, while a spatially adaptive fusion mechanism balances historical information and current observations. Furthermore, bidirectional convolutional long short-term memory (BiConvLSTM) modules are introduced to capture the ordered dependencies among the selected Rx z-layers. Finally, we perform few-step latent diffusion followed by high-resolution residual refinement to generate the final CGM with improved spatial fidelity.

0.25

RadioVIL: Anomaly-Aware Diffusion Models for Radio Map Inpainting and Zero-Shot Vehicle Localization

eess.SP cs.LG ·2026-08-17 ·Ruixin Zhao, Xiucheng Wang, Qiming Zhang, Nan Cheng, Ruijin Sun +1 more
published similarity 0.61
Abstract · 6 pages, 4 figures, 2 tables. Accepted to IEEE GLOBECOM 2026, Wireless Communications Symposium

High-precision radio map construction is essential for emerging 6G Integrated Sensing and Communication (ISAC) applications, including digital twins and intelligent transportation. However, existing deep learning methods predominantly treat this as a pure image completion task, resulting in over-smoothed reconstructions that fundamentally erase high-frequency scattering signatures of dynamic physical entities such as hidden vehicles. To overcome this, we propose RadioVIL, an efficient two-stage framework that reformulates joint radio map inpainting and zero-shot vehicle localization as a prior-guided physical inverse problem. Specifically, we first train a Denoising Diffusion Probabilistic Model (DDPM) to capture the structural generative prior of the environment. During inference from highly sparse measurements, we employ a Diffusion-based Mediating Intermediate Layer Optimization (DMILO) algorithm. By optimizing an L1-regularized sparse deviation term, DMILO mathematically isolates vehicle scattering anomalies layer-by-layer without unfolding the entire denoising chain. Extensive experiments demonstrate that while conventional reconstruction baselines fail to detect hidden vehicles, and the zero-shot diffusion baseline achieves only limited detection ability due to forced semantic harmonization, RadioVIL preserves authentic physical textures, yielding the best LPIPS of 0.0587 in our evaluation. Uniquely, it unlocks accurate zero-shot vehicle localization directly from sparse radio maps, securing a 75.20% Recall and a 3.31-meter average error, paving a robust way for ISAC at the 6G edge.

0.23

Temporal Diffusion Models for Joint Signal-Channel Estimation under Gaussian and $α$-Stable MIMO Channels

eess.SP cs.LG ·2026-11-17 ·Rawad Kansoh, Bahaa Ammoury, Charbel Hannoun, Jihad Fahs, Ibrahim Abou-Faycal
similarity 0.59
Abstract · 14 pages, 10 figures

Diffusion models have emerged as powerful tools for learning complex data distributions and solving inverse problems. However, most diffusion models rely on the Gaussian distribution, which does not accurately represent heavy-tailed data. In this work, we study diffusion-based reconstruction under Gaussian and symmetric $α$-stable fading channels, while also exploring the benefits of using possible temporal dependence in the channel. We consider two variants: pilot-based channel-only estimation and joint image-channel recovery for MIMO systems. Our approach is based on several standard and score-based diffusion models for both Gaussian and $α$-stable distributions. We refine these models by guiding the reverse diffusion process using the observation likelihood and show how a single trained diffusion model can be reused for the location-scale family of distributions without retraining. In blind MIMO recovery, separate diffusion models are used for the image and channel, and their estimates are combined through likelihood guidance. For each setting, we compare independent and temporal reconstruction, where information from previous observations is used to improve the estimation. We show that, under a time-dependent channel model, such a temporal reconstruction improves channel estimation and the quality of the reconstructed image. Finally, we show that, for the same heavy-tailed channel data, using an $α$-stable diffusion prior provides better channel estimation and image reconstruction than using a Gaussian diffusion prior.

0.31

SNR-Gated LSTM-Conditioned Diffusion Model for MIMO Channel Estimation

cs.LG eess.SP ·2026-10-06 ·Jixing Zhou, Xinming Huang
published similarity 0.58
Abstract · 5 pages, 5 figures. Accepted by and presented at the 2026 IEEE 104th Vehicular Technology Conference (VTC2026-Fall)

Accurate and low latency channel estimation is critical for modern MIMO systems, particularly under mobility, where channels exhibit structured sparsity and strong temporal correlation. This paper proposes a time-series conditioned diffusion framework for channel estimation that performs denoising in the angular domain. Starting from least squares (LS) observations, we train a diffusion denoiser whose conditioning information is encoded by a long short-term memory (LSTM) network over a short observation sequence, enabling the model to exploit temporal dynamics beyond per-snapshot estimation. To robustly balance observation fidelity and learned generative priors across a wide signal-to-noise ratio (SNR) range, we introduce a learnable SNR-gated late-fusion shortcut that injects the network input into the final decoding stage through a sigmoid gate with trainable center and scale. To reduce inference latency, we adopt deterministic denoising diffusion implicit model (DDIM) style reverse updates with SNR-adaptive truncation and step allocation, which significantly reduces the number of reverse diffusion steps at high SNR while maintaining strong performance in low SNR regimes. Simulations on time-evolving standardized channel models demonstrate that the proposed method achieves consistent performance gains over existing diffusion-based channel estimation baselines, while retaining low latency through SNR-adaptive inference.

0.32

Scene Reconstruction Using Ubiquitous Wireless Signals via Diffusion Posterior Inference Over physics-Grounded Representations

cs.LG ·2026-10-15 ·Vahid Yazdnian, Yasaman Ghasempour
similarity 0.58
Abstract

Knowing the layout of the physical world matters for many applications, yet the sensors we rely on for it (e.g., cameras and LiDAR) can fail in darkness, in adverse weather, or behind walls. Wireless signals do not face these limitations: every link between a base station and a user is shaped by the buildings it passes, reflects from, or is blocked by, leaving information about the surrounding scene embedded in the wireless channel measured at the endpoints. However, mapping channel measurements to the environment is a severely ill-posed problem: a measurement records only the structures that interact with the transmitted electromagnetic waves along its propagation paths, and even these observations can often be explained by multiple plausible scenes. We therefore formulate wireless scene reconstruction as posterior inference and develop a hierarchical framework with two complementary stages to approach this problem. A wireless foundation model, pretrained to respect propagation physics, transforms each channel measurement into a representation of the scene structure that shaped the observation. A diffusion model then jointly integrates representations from multiple measurements to model and sample the posterior over building occupancy, with consensus over samples producing the final reconstruction. We demonstrate that the framework can accurately recover building footprints from wireless channel measurements alone and show that its performance depends critically on both design components: physics-grounded representations expose scene-relevant information, while joint posterior inference coherently integrates complementary observations.

0.17